From: "Martin J. Bligh" <mbligh@aracnet.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: [Bug 541] New: 3c59x.c: 3c556B Laptop Hurricane not correctly detected/run
Date: Fri, 04 Apr 2003 13:11:58 -0800 [thread overview]
Message-ID: <9700000.1049490718@flay> (raw)
http://bugme.osdl.org/show_bug.cgi?id=541
Summary: 3c59x.c: 3c556B Laptop Hurricane not correctly
detected/run
Kernel Version: 2.5.66
Status: NEW
Severity: normal
Owner: jgarzik@pobox.com
Submitter: brassmold@yahoo.com
Distribution: Redhat 9 with module-init-tools 2.4.21-18
Hardware Environment: IBM Thinkpad T21 type 2647-5BU
Software Environment: kernel 2.5.66 (stock)
Problem Description: The laptop's integrated ethernet chipset, a
3Com PCI 3c556B Laptop Hurricane (according to a 2.4.20 Redhat 9 kernel) does
not correctly detect under kernel 2.5.66 and as a result does not work
correctly. A DHCP fails with event errors.
Steps to reproduce:
Attempt to modprobe the card. In a successful 2.4.20 modprobe (debug=2), you see:
PCI: Found IRQ 11 for device 00:03.0
PCI: Sharing IRQ 11 with 00:03.1
PCI: Sharing IRQ 11 with 08:02.0
PCI: Sharing IRQ 11 with 08:02.1
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:03.0: 3Com PCI 3c556B Laptop Hurricane at 0x1800. Vers LK1.1.18-ac
00:01:03:86:19:b8, IRQ 11
product code 0000 rev aa.8 date 03-01-00
00:03.0: CardBus functions mapped e8101000->e097c000
Internal config register is 80600040, transceivers 0x40.
8K byte-wide RAM 5:3 Rx:Tx split, MII interface.
MII transceiver found at address 0, status 786d.
/etc/hotplug/net.agent: invoke ifup eth0
Enabling bus-master transmits and whole-frame receives.
00:03.0: scatter/gather enabled. h/w checksums enabled
divert: allocating divert_blk for eth0
kernel: eth0: using default media MII
kernel: eth0: Initial media type MII.
kernel: eth0: MII #0 status 786d, link partner capability 41e1, info1 0010,
setting full-duplex.
kernel: eth0: vortex_up() InternalConfig 80600040.
eth0: vortex_up() irq 11 media status 8800.
In a failure, on 2.5.66 (debug=7), you see:
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:03.0: 3Com PCI 3c556B Laptop Hurricane at 0x1800. Vers LK1.1.19
ff:ff:ff:ff:ff:ff, IRQ 11
product code ffff rev ffff.15 date 15-31-127
00:03.0: CardBus functions mapped e8101000->e0859000
Full duplex capable
Internal config register is ffffffff, transceivers 0xffff.
1024K word-wide RAM 3:5 Rx:Tx split, autoselect/<invalid transceiver> interface.
***WARNING*** No MII transceivers found!
Enabling bus-master transmits and early receives.
00:03.0: scatter/gather enabled. h/w checksums enabled
divert: allocating divert_blk for eth0
lspci -vx:
00:03.0 Ethernet controller: 3Com Corporation 3c556B Hurricane CardBus (rev 20)
Subsystem: 3Com Corporation: Unknown device 6356
Flags: bus master, medium devsel, latency 80, IRQ 11
I/O ports at 1800 [size=256]
Memory at e8101400 (32-bit, non-prefetchable) [size=128]
Memory at e8101000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] Power Management version 2
00: b7 10 56 60 17 00 10 02 20 00 00 02 08 50 80 00
10: 01 18 00 00 00 14 10 e8 00 10 10 e8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 56 63
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 0a 0a
If other testing/info is needed, that can be done...
reply other threads:[~2003-04-04 21:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9700000.1049490718@flay \
--to=mbligh@aracnet.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox