Re: VIA IDE driver status ?

["Glenn C. Hofmann" <hofmanng@swbell.net>]

It should support both, to my knowledge (which is very limited, mind
you).  I also went out to the store and purchased a new cable, which
made the driver recognize the cable correctly, whereas it did not
before.  I wonder if there is not a serious deficiency in the cables
sent out with motherboards, which is contributing to the problems a lot
of people are having in this area.  Hope this helps some.

Chris

On 31 Mar 2001 15:14:47 -0300, Frédéric L. W. Meunier wrote:
> I'm not overclocking. It's an ASUS A7Pro with Athlon 1000. I
> had the same problem with an ASUS K7V with Athlon 700. But
> the processor died after my cooler failed for 20 minutes!
> 
> BTW, how do I know if my cable is ATA100/ATA66, not only ATA66
> ? The manual from the A7Pro says it supports both, but at the
> site it says the cable shipped with this motherboard is ATA66.
> 
> On Sat, Mar 31, 2001 at 12:00:41PM -0600, Glenn C. Hofmann wrote:
> > I am not sure if this applies in your case, but I was getting problems
> > such as this on my Abit KT7-RAID and had the correct cables, also.  One
> > day, on a hunch after reading a post from Alan about overclocking, I
> > took my Athlon 750 down to 850 from 1.05 GHz and all is working great
> > now.  If your overclocking, I would suggest not doing so (at least not
> > so much), based on my experience.  I am also using the v4.0 driver.
> > 
> > Chris
> > 
> >   On 31 Mar 2001 00:41:32 -0300, Frédéric L. W. Meunier wrote:
> > > Hi. I really can't get UDMA66 with the VIA driver. I tried
> > > everything, also a new motherboard (ASUS A7Pro) with a
> > > ATA100/ATA66 cable (using both ends...)!
> > > 
> > > All I get are the usual CRC error messages.
> > > 
> > > So, there's no UDMA66 for any vt82c686a ? I'm using 2.4.3.
> > > 
> > > If there's no UDMA66, what are the advantages using this
> > > driver ?
> > > 
> > > TIA.
> 
> -- 
> 0@pervalidus.{net, {dyndns.}org} Tel: 55-21-717-2399 (Niterói-RJ BR)
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/