From: Can Guo <cang@codeaurora.org>
To: Avri Altman <Avri.Altman@wdc.com>
Cc: asutoshd@codeaurora.org, nguyenb@codeaurora.org,
rnayak@codeaurora.org, linux-scsi@vger.kernel.org,
kernel-team@android.com, saravanak@google.com,
salyzyn@google.com, Alim Akhtar <alim.akhtar@samsung.com>,
Pedro Sousa <pedrom.sousa@synopsys.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Bean Huo <beanhuo@micron.com>,
Tomas Winkler <tomas.winkler@intel.com>,
Stanley Chu <stanley.chu@mediatek.com>,
Venkat Gopalakrishnan <venkatg@codeaurora.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 3/7] scsi: ufs: Fix up auto hibern8 enablement
Date: Fri, 15 Nov 2019 11:33:19 +0800 [thread overview]
Message-ID: <9870aa032748587b65ea54f420f1f080@codeaurora.org> (raw)
In-Reply-To: <MN2PR04MB69913B9DBCEE72322A741F14FC710@MN2PR04MB6991.namprd04.prod.outlook.com>
On 2019-11-14 17:23, Avri Altman wrote:
>>
>>
>> Fix up possible unclocked register access to auto hibern8 register in
>> resume path
>> and through sysfs entry. Meanwhile, enable auto hibern8 only after
>> device is
>> fully initialized in probe path.
>>
>> Signed-off-by: Can Guo <cang@codeaurora.org>
> Acked-by: Avri Altman <avri.altman@wdc.com>
>
>> ---
>> drivers/scsi/ufs/ufs-sysfs.c | 17 +++++++++++------
>> drivers/scsi/ufs/ufshcd.c | 12 ++++++------
>> 2 files changed, 17 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/scsi/ufs/ufs-sysfs.c
>> b/drivers/scsi/ufs/ufs-sysfs.c index
>> 969a36b..6c2f19e 100644
>> --- a/drivers/scsi/ufs/ufs-sysfs.c
>> +++ b/drivers/scsi/ufs/ufs-sysfs.c
>> @@ -126,13 +126,18 @@ static void ufshcd_auto_hibern8_update(struct
>> ufs_hba *hba, u32 ahit)
>> return;
>>
>> spin_lock_irqsave(hba->host->host_lock, flags);
>> - if (hba->ahit == ahit)
>> - goto out_unlock;
>> - hba->ahit = ahit;
>> - if (!pm_runtime_suspended(hba->dev))
>> - ufshcd_writel(hba, hba->ahit,
>> REG_AUTO_HIBERNATE_IDLE_TIMER);
>> -out_unlock:
>> + if (hba->ahit != ahit)
>> + hba->ahit = ahit;
>> spin_unlock_irqrestore(hba->host->host_lock, flags);
>> + if (!pm_runtime_suspended(hba->dev)) {
>> + pm_runtime_get_sync(hba->dev);
>> + ufshcd_hold(hba, false);
>> + spin_lock_irqsave(hba->host->host_lock, flags);
>> + ufshcd_writel(hba, hba->ahit,
>> REG_AUTO_HIBERNATE_IDLE_TIMER);
>> + spin_unlock_irqrestore(hba->host->host_lock, flags);
> Call ufshcd_auto_hibern8_enable instead of open coding?
>
In that case, we would have to export ufshcd_auto_hibern8_enable() as it
is static for now.
Shall do that.
Thanks,
Can Guo.
>> + ufshcd_release(hba);
>> + pm_runtime_put(hba->dev);
>> + }
>> }
>>
>> /* Convert Auto-Hibernate Idle Timer register value to microseconds
>> */ diff --git
>> a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index
>> 525f8e6..f12f5a7
>> 100644
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -6892,9 +6892,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
>> /* UniPro link is active now */
>> ufshcd_set_link_active(hba);
>>
>> - /* Enable Auto-Hibernate if configured */
>> - ufshcd_auto_hibern8_enable(hba);
>> -
>> ret = ufshcd_verify_dev_init(hba);
>> if (ret)
>> goto out;
>> @@ -6945,6 +6942,9 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
>> /* set the state as operational after switching to desired
>> gear */
>> hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
>>
>> + /* Enable Auto-Hibernate if configured */
>> + ufshcd_auto_hibern8_enable(hba);
>> +
>> /*
>> * If we are in error handling context or in power management
>> callbacks
>> * context, no need to scan the host @@ -7962,12 +7962,12 @@
>> static int
>> ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>> if (hba->clk_scaling.is_allowed)
>> ufshcd_resume_clkscaling(hba);
>>
>> - /* Schedule clock gating in case of no access to UFS device
>> yet */
>> - ufshcd_release(hba);
>> -
>> /* Enable Auto-Hibernate if configured */
>> ufshcd_auto_hibern8_enable(hba);
>>
>> + /* Schedule clock gating in case of no access to UFS device
>> yet */
>> + ufshcd_release(hba);
>> +
>> goto out;
>>
>> set_old_link_state:
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
>> Forum,
>> a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-11-15 3:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1573627552-12615-1-git-send-email-cang@codeaurora.org>
2019-11-13 6:45 ` [PATCH v4 1/7] scsi: ufs: Add device reset in link recovery path Can Guo
2019-11-13 6:45 ` [PATCH v4 2/7] scsi: ufs-qcom: Add reset control support for host controller Can Guo
2019-11-14 9:03 ` Avri Altman
2019-11-15 1:25 ` Can Guo
2019-11-13 6:45 ` [PATCH v4 3/7] scsi: ufs: Fix up auto hibern8 enablement Can Guo
2019-11-14 9:23 ` Avri Altman
2019-11-15 3:33 ` Can Guo [this message]
2019-11-13 6:45 ` [PATCH v4 4/7] scsi: ufs: Fix register dump caused sleep in atomic context Can Guo
2019-11-13 6:45 ` [PATCH v4 5/7] scsi: ufs: Fix irq return code Can Guo
2019-11-14 10:43 ` Avri Altman
2019-11-13 6:45 ` [PATCH v4 6/7] scsi: ufs: Abort gating if clock on request is pending Can Guo
2019-11-14 10:46 ` Avri Altman
2019-11-13 6:45 ` [PATCH v4 7/7] scsi: ufs: Fix error handing during hibern8 enter Can Guo
2019-11-14 11:06 ` Avri Altman
2019-11-15 1:33 ` Can Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9870aa032748587b65ea54f420f1f080@codeaurora.org \
--to=cang@codeaurora.org \
--cc=Avri.Altman@wdc.com \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=beanhuo@micron.com \
--cc=jejb@linux.ibm.com \
--cc=kernel-team@android.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=nguyenb@codeaurora.org \
--cc=pedrom.sousa@synopsys.com \
--cc=rnayak@codeaurora.org \
--cc=salyzyn@google.com \
--cc=saravanak@google.com \
--cc=stanley.chu@mediatek.com \
--cc=tomas.winkler@intel.com \
--cc=venkatg@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox