From: Dumitru Ciobarcianu <cioby@lnx.ro>
To: LKML <linux-kernel@vger.kernel.org>
Subject: Re: PNPBIOS: warning: >= 16 resources, overflow?
Date: 06 Sep 2001 14:32:46 +0300 [thread overview]
Message-ID: <999775966.1963.7.camel@LNX.iNES.RO> (raw)
On J, 2001-09-06 at 11:42, Gerd Knorr wrote:
> lspnp (comes with pcmcia-cs) would be more intresting. The pnpbios code
> fills a "struct pci_dev" for each device reported by the pnpbios, and it
> looks like your portable has one device with alot ressources, so the
> ressources array in struct pci_dev can't hold them all. There is a
> #define in include/linux/pci.h for the array size ...
>
> Gerd
>
Ok, I'll try to modify that array.
Here is the output of lspnp -vvv
[root@LNX cioby]# lspnp -vvv >lspnp
00 PNP0c02 system peripheral: other
flags: [no disable] [no config] [static]
allocated resources:
io 0x0080-0x0080 [16-bit decode]
mem 0xfff80000-0xffffffff [8 bit] [r/o]
01 PNP0c01 memory controller: RAM
flags: [no disable] [no config] [static]
allocated resources:
mem 0x00000000-0x0009ffff [8 bit] [r/w]
mem 0x000e8000-0x000fffff [8 bit] [r/o] [shadow] [rom]
mem 0x00100000-0x080fffff [8 bit] [r/o]
02 PNP0200 system peripheral: DMA controller
flags: [no disable] [no config] [static]
allocated resources:
io 0x0000-0x000f [16-bit decode]
io 0x0081-0x008f [16-bit decode]
io 0x00c0-0x00df [16-bit decode]
dma 4 [8/16 bit] [compat]
03 PNP0000 system peripheral: programmable interrupt controller
flags: [no disable] [no config] [static]
allocated resources:
io 0x0020-0x0021 [16-bit decode]
io 0x00a0-0x00a1 [16-bit decode]
irq 2 [high edge]
04 PNP0100 system peripheral: system timer
flags: [no disable] [no config] [static]
allocated resources:
io 0x0040-0x0043 [16-bit decode]
irq 0 [high edge]
05 PNP0b00 system peripheral: real time clock
flags: [no disable] [no config] [static]
allocated resources:
io 0x0070-0x0071 [16-bit decode]
irq 8 [high edge]
06 PNP0303 input device: keyboard
flags: [no disable] [no config] [static]
allocated resources:
io 0x0060-0x0060 [16-bit decode]
io 0x0064-0x0064 [16-bit decode]
irq 1 [high edge]
07 PNP0c04 reserved: other
flags: [no disable] [no config] [static]
allocated resources:
io 0x00f0-0x00ff [16-bit decode]
irq 13 [high edge]
08 PNP0800 multimedia controller: audio
flags: [no disable] [no config] [static]
allocated resources:
io 0x0061-0x0061 [16-bit decode]
09 PNP0a03 bridge controller: PCI
flags: [no disable] [no config] [static]
allocated resources:
io 0x0cf8-0x0cff [16-bit decode]
0a PNP0c02 bridge controller: ISA
flags: [no disable] [no config] [static]
allocated resources:
io 0x04d0-0x04d1 [16-bit decode]
io 0x1000-0x103f [16-bit decode]
io 0x1040-0x104f [16-bit decode]
io 0x0010-0x0018 [16-bit decode]
io 0x001f-0x001f [16-bit decode]
io 0x0024-0x0025 [16-bit decode]
io 0x0028-0x0029 [16-bit decode]
io 0x002c-0x002d [16-bit decode]
io 0x0030-0x0031 [16-bit decode]
io 0x0034-0x0035 [16-bit decode]
io 0x0038-0x0039 [16-bit decode]
io 0x003c-0x003d [16-bit decode]
io 0x0050-0x0052 [16-bit decode]
io 0x0072-0x0077 [16-bit decode]
io 0x0090-0x009f [16-bit decode]
io 0x00a4-0x00a5 [16-bit decode]
io 0x00a8-0x00a9 [16-bit decode]
io 0x00ac-0x00ad [16-bit decode]
io 0x00b0-0x00bd [16-bit decode]
0b PNP0c02 memory controller: RAM
flags: [no disable] [no config] [static]
allocated resources:
mem 0x000e4000-0x000e7fff [8 bit] [r/w]
0c PNP0c02 memory controller: RAM
flags: [no disable] [no config] [static]
allocated resources:
mem disabled [8 bit] [r/o] [shadow]
mem disabled [8 bit] [r/o] [shadow]
mem disabled [8 bit] [r/o] [shadow]
mem disabled [8 bit] [r/o] [shadow]
mem disabled [8 bit] [r/o] [shadow]
mem disabled [8 bit] [r/o] [shadow]
11 PNP0f13 input device: mouse
flags: [input] [dynamic]
allocated resources:
irq 12 [high edge]
possible resources:
irq 12 [high edge]
15 PNP0700 mass storage device: floppy
flags: [bootable] [dynamic]
allocated resources:
io 0x03f0-0x03f5 [16-bit decode]
io 0x03f7-0x03f7 [16-bit decode]
irq 6 [high edge]
dma 2 [8 bit] [compat]
possible resources:
[start dep fn]
io 0x03f0-0x03f5 [16-bit decode]
io 0x03f7-0x03f7 [16-bit decode]
irq 6 [high edge]
dma 2 [8 bit] [compat]
[start dep fn]
io 0x0370-0x0375 [16-bit decode]
io 0x0377-0x0377 [16-bit decode]
irq 6 [high edge]
dma 2 [8 bit] [compat]
[end dep fn]
17 PNP0400 communications device: AT parallel port
flags: [dynamic]
allocated resources:
io 0x0378-0x037f [16-bit decode]
irq 7 [high edge]
possible resources:
[start dep fn]
io 0x0378-0x037f [16-bit decode]
irq 7 [high edge]
[start dep fn]
io 0x0278-0x027f [16-bit decode]
irq 7 [high edge]
[start dep fn]
io 0x03bc-0x03bf [16-bit decode]
irq 7 [high edge]
[start dep fn]
io 0x0378-0x037f [16-bit decode]
irq 5 [high edge]
[start dep fn]
io 0x0278-0x027f [16-bit decode]
irq 5 [high edge]
[start dep fn]
io 0x03bc-0x03bf [16-bit decode]
irq 5 [high edge]
[end dep fn]
next reply other threads:[~2001-09-06 11:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-09-06 11:32 Dumitru Ciobarcianu [this message]
2001-09-06 12:12 ` PNPBIOS: warning: >= 16 resources, overflow? - SOLVED Dumitru Ciobarcianu
-- strict thread matches above, loose matches on Subject: below --
2001-09-06 8:12 PNPBIOS: warning: >= 16 resources, overflow? Dumitru Ciobarcianu
2001-09-06 8:42 ` Gerd Knorr
2001-09-06 12:07 ` Alan Cox
2001-09-06 13:04 ` Gerd Knorr
2001-09-06 13:21 ` Alan Cox
2001-09-06 16:32 ` Gerd Knorr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=999775966.1963.7.camel@LNX.iNES.RO \
--to=cioby@lnx.ro \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox