[PATCH net V2 1/2] net: xilinx: axienet: Correct BD length masks to match AXIDMA IP spec

[PATCH net V2 1/2] net: xilinx: axienet: Correct BD length masks to match AXIDMA IP spec

[Suraj Gupta]

The XAXIDMA_BD_CTRL_LENGTH_MASK and XAXIDMA_BD_STS_ACTUAL_LEN_MASK
macros were defined as 0x007FFFFF (23 bits), but the AXI DMA IP
product guide (PG021) specifies the buffer length field as bits 25:0
(26 bits). Update both masks to match the IP documentation.

In practice this had no functional impact, since Ethernet frames are
far smaller than 2^23 bytes and the extra bits were always zero, but
the masks should still reflect the hardware specification.

Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
---
 drivers/net/ethernet/xilinx/xilinx_axienet.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 5ff742103beb..602389843342 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -105,7 +105,7 @@
 #define XAXIDMA_BD_HAS_DRE_MASK		0xF00 /* Whether has DRE mask */
 #define XAXIDMA_BD_WORDLEN_MASK		0xFF /* Whether has DRE mask */
 
-#define XAXIDMA_BD_CTRL_LENGTH_MASK	0x007FFFFF /* Requested len */
+#define XAXIDMA_BD_CTRL_LENGTH_MASK	GENMASK(25, 0) /* Requested len */
 #define XAXIDMA_BD_CTRL_TXSOF_MASK	0x08000000 /* First tx packet */
 #define XAXIDMA_BD_CTRL_TXEOF_MASK	0x04000000 /* Last tx packet */
 #define XAXIDMA_BD_CTRL_ALL_MASK	0x0C000000 /* All control bits */
@@ -130,7 +130,7 @@
 #define XAXIDMA_BD_CTRL_TXEOF_MASK	0x04000000 /* Last tx packet */
 #define XAXIDMA_BD_CTRL_ALL_MASK	0x0C000000 /* All control bits */
 
-#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK	0x007FFFFF /* Actual len */
+#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK	GENMASK(25, 0) /* Actual len */
 #define XAXIDMA_BD_STS_COMPLETE_MASK	0x80000000 /* Completed */
 #define XAXIDMA_BD_STS_DEC_ERR_MASK	0x40000000 /* Decode error */
 #define XAXIDMA_BD_STS_SLV_ERR_MASK	0x20000000 /* Slave error */
-- 
2.49.1

[PATCH net V2 0/2] Correct BD length masks and BQL accounting for multi-BD TX packets

[Suraj Gupta]

This patch series fixes two issues in the Xilinx AXI Ethernet driver:
 1. Corrects the BD length masks to match the AXIDMA IP spec.
 2. Fixes BQL accounting for multi-BD TX packets.

---
Changes in V2:
- Define BD length masks with GENMASK(25, 0) per PG021.
- Credit BQL using skb->len on packet completion instead of summing
  per-BD actual lengths from descriptor status.
---

Suraj Gupta (2):
  net: xilinx: axienet: Correct BD length masks to match AXIDMA IP spec
  net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets

 drivers/net/ethernet/xilinx/xilinx_axienet.h      | 4 ++--
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 9 ++++-----
 2 files changed, 6 insertions(+), 7 deletions(-)

-- 
2.49.1

[PATCH net V2 1/2] net: xilinx: axienet: Correct BD length masks to match AXIDMA IP spec

[Suraj Gupta]

The XAXIDMA_BD_CTRL_LENGTH_MASK and XAXIDMA_BD_STS_ACTUAL_LEN_MASK
macros were defined as 0x007FFFFF (23 bits), but the AXI DMA IP
product guide (PG021) specifies the buffer length field as bits 25:0
(26 bits). Update both masks to match the IP documentation.

In practice this had no functional impact, since Ethernet frames are
far smaller than 2^23 bytes and the extra bits were always zero, but
the masks should still reflect the hardware specification.

Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
---
 drivers/net/ethernet/xilinx/xilinx_axienet.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 5ff742103beb..fcd3aaef27fc 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -105,7 +105,7 @@
 #define XAXIDMA_BD_HAS_DRE_MASK		0xF00 /* Whether has DRE mask */
 #define XAXIDMA_BD_WORDLEN_MASK		0xFF /* Whether has DRE mask */
 
-#define XAXIDMA_BD_CTRL_LENGTH_MASK	0x007FFFFF /* Requested len */
+#define XAXIDMA_BD_CTRL_LENGTH_MASK	GENMASK(25, 0) /* Requested len */
 #define XAXIDMA_BD_CTRL_TXSOF_MASK	0x08000000 /* First tx packet */
 #define XAXIDMA_BD_CTRL_TXEOF_MASK	0x04000000 /* Last tx packet */
 #define XAXIDMA_BD_CTRL_ALL_MASK	0x0C000000 /* All control bits */
@@ -130,7 +130,7 @@
 #define XAXIDMA_BD_CTRL_TXEOF_MASK	0x04000000 /* Last tx packet */
 #define XAXIDMA_BD_CTRL_ALL_MASK	0x0C000000 /* All control bits */
 
-#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK	0x007FFFFF /* Actual len */
+#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK	GENMASK(25, 0) /* Actual len */
 #define XAXIDMA_BD_STS_COMPLETE_MASK	0x80000000 /* Completed */
 #define XAXIDMA_BD_STS_DEC_ERR_MASK	0x40000000 /* Decode error */
 #define XAXIDMA_BD_STS_SLV_ERR_MASK	0x20000000 /* Slave error */
-- 
2.49.1

[PATCH net V2 2/2] net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets

[Suraj Gupta]

When a TX packet spans multiple buffer descriptors (scatter-gather),
axienet_free_tx_chain sums the per-BD actual length from descriptor
status into a caller-provided accumulator. That sum is reset on each
NAPI poll. If the BDs for a single packet complete across different
polls, the earlier bytes are lost and never credited to BQL. This
causes BQL to think bytes are permanently in-flight, eventually
stalling the TX queue.

The SKB pointer is stored only on the last BD of a packet. When that
BD completes, use skb->len for the byte count instead of summing
per-BD status lengths. This matches netdev_sent_queue(), which debits
skb->len, and naturally survives across polls because no partial
packet contributes to the accumulator.

Fixes: c900e49d58eb ("net: xilinx: axienet: Implement BQL")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
---
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index b06e4c37ff61..263c4b67fd5a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -770,8 +770,8 @@ static int axienet_device_reset(struct net_device *ndev)
  * @first_bd:	Index of first descriptor to clean up
  * @nr_bds:	Max number of descriptors to clean up
  * @force:	Whether to clean descriptors even if not complete
- * @sizep:	Pointer to a u32 filled with the total sum of all bytes
- *		in all cleaned-up descriptors. Ignored if NULL.
+ * @sizep:	Pointer to a u32 accumulating the total byte count of
+ *		completed packets (using skb->len). Ignored if NULL.
  * @budget:	NAPI budget (use 0 when not called from NAPI poll)
  *
  * Would either be called after a successful transmit operation, or after
@@ -805,6 +805,8 @@ static int axienet_free_tx_chain(struct axienet_local *lp, u32 first_bd,
 				 DMA_TO_DEVICE);
 
 		if (cur_p->skb && (status & XAXIDMA_BD_STS_COMPLETE_MASK)) {
+			if (sizep)
+				*sizep += cur_p->skb->len;
 			napi_consume_skb(cur_p->skb, budget);
 			packets++;
 		}
@@ -818,9 +820,6 @@ static int axienet_free_tx_chain(struct axienet_local *lp, u32 first_bd,
 		wmb();
 		cur_p->cntrl = 0;
 		cur_p->status = 0;
-
-		if (sizep)
-			*sizep += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
 	}
 
 	if (!force) {
-- 
2.49.1

Re: [PATCH net V2 2/2] net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets

[Sean Anderson]

On 3/27/26 03:32, Suraj Gupta wrote:
> When a TX packet spans multiple buffer descriptors (scatter-gather),
> axienet_free_tx_chain sums the per-BD actual length from descriptor
> status into a caller-provided accumulator. That sum is reset on each
> NAPI poll. If the BDs for a single packet complete across different
> polls, the earlier bytes are lost and never credited to BQL. This
> causes BQL to think bytes are permanently in-flight, eventually
> stalling the TX queue.
> 
> The SKB pointer is stored only on the last BD of a packet. When that
> BD completes, use skb->len for the byte count instead of summing
> per-BD status lengths. This matches netdev_sent_queue(), which debits
> skb->len, and naturally survives across polls because no partial
> packet contributes to the accumulator.
> 
> Fixes: c900e49d58eb ("net: xilinx: axienet: Implement BQL")
> Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
> ---
>  drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> index b06e4c37ff61..263c4b67fd5a 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> @@ -770,8 +770,8 @@ static int axienet_device_reset(struct net_device *ndev)
>   * @first_bd:	Index of first descriptor to clean up
>   * @nr_bds:	Max number of descriptors to clean up
>   * @force:	Whether to clean descriptors even if not complete
> - * @sizep:	Pointer to a u32 filled with the total sum of all bytes
> - *		in all cleaned-up descriptors. Ignored if NULL.
> + * @sizep:	Pointer to a u32 accumulating the total byte count of
> + *		completed packets (using skb->len). Ignored if NULL.
>   * @budget:	NAPI budget (use 0 when not called from NAPI poll)
>   *
>   * Would either be called after a successful transmit operation, or after
> @@ -805,6 +805,8 @@ static int axienet_free_tx_chain(struct axienet_local *lp, u32 first_bd,
>  				 DMA_TO_DEVICE);
>  
>  		if (cur_p->skb && (status & XAXIDMA_BD_STS_COMPLETE_MASK)) {
> +			if (sizep)
> +				*sizep += cur_p->skb->len;
>  			napi_consume_skb(cur_p->skb, budget);
>  			packets++;
>  		}
> @@ -818,9 +820,6 @@ static int axienet_free_tx_chain(struct axienet_local *lp, u32 first_bd,
>  		wmb();
>  		cur_p->cntrl = 0;
>  		cur_p->status = 0;
> -
> -		if (sizep)
> -			*sizep += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
>  	}
>  
>  	if (!force) {

Reviewed-by: Sean Anderson <sean.anderson@linux.dev>

Although FWIW this may result in slightly-different statistics. Not sure
if we care since this will only affect packets that could not be sent
for whatever reason (collisions, loss of carrier, etc.)

Re: [PATCH net V2 1/2] net: xilinx: axienet: Correct BD length masks to match AXIDMA IP spec

[Sean Anderson]

On 3/27/26 03:32, Suraj Gupta wrote:
> The XAXIDMA_BD_CTRL_LENGTH_MASK and XAXIDMA_BD_STS_ACTUAL_LEN_MASK
> macros were defined as 0x007FFFFF (23 bits), but the AXI DMA IP
> product guide (PG021) specifies the buffer length field as bits 25:0
> (26 bits). Update both masks to match the IP documentation.
> 
> In practice this had no functional impact, since Ethernet frames are
> far smaller than 2^23 bytes and the extra bits were always zero, but
> the masks should still reflect the hardware specification.
> 
> Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
> Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
> ---
>  drivers/net/ethernet/xilinx/xilinx_axienet.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
> index 5ff742103beb..fcd3aaef27fc 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
> +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
> @@ -105,7 +105,7 @@
>  #define XAXIDMA_BD_HAS_DRE_MASK		0xF00 /* Whether has DRE mask */
>  #define XAXIDMA_BD_WORDLEN_MASK		0xFF /* Whether has DRE mask */
>  
> -#define XAXIDMA_BD_CTRL_LENGTH_MASK	0x007FFFFF /* Requested len */
> +#define XAXIDMA_BD_CTRL_LENGTH_MASK	GENMASK(25, 0) /* Requested len */
>  #define XAXIDMA_BD_CTRL_TXSOF_MASK	0x08000000 /* First tx packet */
>  #define XAXIDMA_BD_CTRL_TXEOF_MASK	0x04000000 /* Last tx packet */
>  #define XAXIDMA_BD_CTRL_ALL_MASK	0x0C000000 /* All control bits */
> @@ -130,7 +130,7 @@
>  #define XAXIDMA_BD_CTRL_TXEOF_MASK	0x04000000 /* Last tx packet */
>  #define XAXIDMA_BD_CTRL_ALL_MASK	0x0C000000 /* All control bits */
>  
> -#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK	0x007FFFFF /* Actual len */
> +#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK	GENMASK(25, 0) /* Actual len */
>  #define XAXIDMA_BD_STS_COMPLETE_MASK	0x80000000 /* Completed */
>  #define XAXIDMA_BD_STS_DEC_ERR_MASK	0x40000000 /* Decode error */
>  #define XAXIDMA_BD_STS_SLV_ERR_MASK	0x20000000 /* Slave error */

Reviewed-by: Sean Anderson <sean.anderson@linux.dev>

Re: [PATCH net V2 0/2] Correct BD length masks and BQL accounting for multi-BD TX packets

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net.git (main)
by Paolo Abeni <pabeni@redhat.com>:

On Fri, 27 Mar 2026 13:02:36 +0530 you wrote:
> This patch series fixes two issues in the Xilinx AXI Ethernet driver:
>  1. Corrects the BD length masks to match the AXIDMA IP spec.
>  2. Fixes BQL accounting for multi-BD TX packets.
> 
> ---
> Changes in V2:
> - Define BD length masks with GENMASK(25, 0) per PG021.
> - Credit BQL using skb->len on packet completion instead of summing
>   per-BD actual lengths from descriptor status.
> 
> [...]

Here is the summary with links:
  - [net,V2,1/2] net: xilinx: axienet: Correct BD length masks to match AXIDMA IP spec
    https://git.kernel.org/netdev/net/c/393e0b4f178e
  - [net,V2,2/2] net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets
    https://git.kernel.org/netdev/net/c/d1978d03e867

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html