Re: [PATCH v3 1/6] dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H

[Guenter Roeck <linux@roeck-us.net>]

On 8/4/25 12:57, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Extend the Renesas WDT device tree bindings to support the watchdog timer
> found on the RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs.
> 
> The RZ/T2H WDT is mostly compatible with the one found on the RZ/V2H(P),
> but includes an additional register and differs in the clock division
> ratio settings for the WDTCR[CKS] field. To reflect these differences,
> introduce a new compatible string, "renesas,r9a09g077-wdt".
> 
> The binding schema is updated accordingly. On RZ/T2H, the WDT does not
> require the "resets" property. It also requires two register regions and
> the presence of a "power-domains" property. The "clock-names" property is
> limited to a single entry, "pclk", for this SoC.
> 
> The RZ/N2H SoC uses the same WDT IP as the RZ/T2H. It is supported by
> using "renesas,r9a09g087-wdt" as the primary compatible string, with
> "renesas,r9a09g077-wdt" listed as a fallback to describe the shared
> hardware features.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>