public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Ian Soboroff <ian.soboroff@nist.gov>
To: linux-kernel@vger.kernel.org
Cc: Alan Cox <alan@redhat.com>
Subject: Re: [lkml] Linux 2.4.19-ac4
Date: 06 Aug 2002 08:30:59 -0400	[thread overview]
Message-ID: <9cfeldcmanw.fsf@rogue.ncsl.nist.gov> (raw)
In-Reply-To: <9cflm7kmbht.fsf@rogue.ncsl.nist.gov>


Never mind.  It turns out I still have to pass 'ide0=ata66 ide1=ata66'
on the kernel command line.  2.4.19-ac4 boots for me!

Thanks * 10^6
ian

Ian Soboroff <ian.soboroff@nist.gov> writes:

>  Alan Cox <alan@redhat.com> writes:
> 
> > The IDE debugging continues. -ac4 should fix the breakages in ac2/ac3. It
> > hopefully also fixes the ALi hangs with non ALi north bridges (mostly 
> > Transmeta boxes).
> > 
> > Current IDE mysteries to fix
> > -	Hang on at least one VIA/HPT combo
> > -	Still one report of a promise hang
> > 
> > Remaining IDE non mysteries to fix
> > -	No DMA on OSB4 IDE
> > 
> > Remaining IDE to check
> > -	Does Ali rev 0xC4 support LBA48, or is it > C4 that does
> > 
> > If you don't have IDE problems there is nothing worth updating past -ac1
> 
> My Fujitsu P-2110 still hangs on boot, same place it did on rc5-ac1.
> (I didn't get a chance to try 2.4.19-ac[123], they came out too
> fast...):
> 
> ...
> block: 704 slots per queue, batch=176
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=XX
> ALI15X3: IDE controller on PCI bus 00 dev 78
> PCI: No IRQ known for interrupt pin A of device 00:0f.0. Please try using pci=bi
> osirq
> ALI15X3: chipset revision 195
> ALI15X3: not 100% native mode: will probe irqs later
> 
> Output of lspci -v:
> 
> 00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge (rev 02)
> 	Subsystem: Citicorp TTI: Unknown device 110e
> 	Flags: bus master, medium devsel, latency 64
> 	Memory at fc100000 (32-bit, non-prefetchable) [size=1M]
> 
> 00:00.1 RAM memory: Transmeta Corporation SDRAM controller
> 	Subsystem: Citicorp TTI: Unknown device 110e
> 	Flags: fast devsel
> 
> 00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad
> 	Subsystem: Citicorp TTI: Unknown device 110e
> 	Flags: fast devsel
> 
> 00:02.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
> 	Subsystem: Citicorp TTI: Unknown device 10a2
> 	Flags: bus master, medium devsel, latency 64, IRQ 11
> 	Memory at fc004000 (32-bit, non-prefetchable) [size=4K]
> 	Capabilities: <available only to root>
> 
> 00:04.0 Multimedia audio controller: Acer Laboratories Inc. [ALi] M5451 PCI AC-Link Controller Audio Device (rev 01)
> 	Subsystem: Citicorp TTI: Unknown device 112f
> 	Flags: bus master, medium devsel, latency 64, IRQ 9
> 	I/O ports at 1000 [size=256]
> 	Memory at fc005000 (32-bit, non-prefetchable) [size=4K]
> 	Capabilities: <available only to root>
> 
> 00:06.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
> 	Subsystem: Citicorp TTI: Unknown device 10a3
> 	Flags: medium devsel
> 
> 00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV]
> 	Subsystem: Acer Laboratories Inc. [ALi] ALI M1533 Aladdin IV ISA Bridge
> 	Flags: bus master, medium devsel, latency 0
> 	Capabilities: <available only to root>
> 
> 00:0c.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
> 	Subsystem: Citicorp TTI: Unknown device 10c6
> 	Flags: bus master, medium devsel, latency 168, IRQ 9
> 	Memory at 17100000 (32-bit, non-prefetchable) [size=4K]
> 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=176
> 	Memory window 0: 17400000-177ff000 (prefetchable)
> 	Memory window 1: 17800000-17bff000
> 	I/O window 0: 00004000-000040ff
> 	I/O window 1: 00004400-000044ff
> 	16-bit legacy interface ports at 0001
> 
> 00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c3) (prog-if fa)
> 	Subsystem: Citicorp TTI: Unknown device 10a4
> 	Flags: bus master, medium devsel, latency 32
> 	I/O ports at 1800 [size=16]
> 	Capabilities: <available only to root>
> 
> 00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
> 	Subsystem: Citicorp TTI: Unknown device 111c
> 	Flags: bus master, medium devsel, latency 64, IRQ 9
> 	I/O ports at 8000 [size=256]
> 	Memory at fc007800 (32-bit, non-prefetchable) [size=256]
> 	Capabilities: <available only to root>
> 
> 00:13.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394 Controller (PHY/Link) 1394a-2000 (prog-if 10 [OHCI])
> 	Subsystem: Citicorp TTI: Unknown device 1162
> 	Flags: medium devsel, IRQ 9
> 	Memory at fc007000 (32-bit, non-prefetchable) [size=2K]
> 	Memory at fc000000 (32-bit, non-prefetchable) [size=16K]
> 	Capabilities: <available only to root>
> 
> 00:14.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M (rev 64) (prog-if 00 [VGA])
> 	Subsystem: Citicorp TTI: Unknown device 114f
> 	Flags: bus master, stepping, medium devsel, latency 66, IRQ 9
> 	Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> 	I/O ports at 1400 [size=256]
> 	Memory at fc006000 (32-bit, non-prefetchable) [size=4K]
> 	Expansion ROM at <unassigned> [disabled] [size=128K]
> 	Capabilities: <available only to root>
> 
> ian

  reply	other threads:[~2002-08-06 12:27 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-08-05 11:47 Linux 2.4.19-ac4 Alan Cox
2002-08-05 18:10 ` Tomas Szepe
2002-08-05 18:43   ` Tomas Szepe
2002-08-05 19:59 ` Adrian Bunk
2002-08-05 20:00   ` Alan Cox
2002-08-05 20:56 ` James Mayer
2002-08-05 22:19   ` Alan Cox
2002-08-05 22:31     ` Thunder from the hill
2002-08-06  1:58     ` Gary White
2002-08-07 12:22     ` Kasper Dupont
2002-08-05 22:44 ` Adrian Bunk
2002-08-06 12:13 ` [lkml] " Ian Soboroff
2002-08-06 12:30   ` Ian Soboroff [this message]
2002-08-07 14:31     ` Alan Cox
2002-08-12 12:12       ` Ian Soboroff
2002-08-06 15:46 ` Oleg Drokin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9cfeldcmanw.fsf@rogue.ncsl.nist.gov \
    --to=ian.soboroff@nist.gov \
    --cc=alan@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox