* Re: 2.6.8-rc4-mm1
@ 2004-08-11 3:33 Diffie
2004-08-11 15:36 ` 2.6.8-rc4-mm1 Randy.Dunlap
2004-08-11 22:57 ` 2.6.8-rc4-mm1 Bjorn Helgaas
0 siblings, 2 replies; 21+ messages in thread
From: Diffie @ 2004-08-11 3:33 UTC (permalink / raw)
To: Andrew Morton; +Cc: bjorn.helgaas, LKML
[-- Attachment #1: Type: text/plain, Size: 469 bytes --]
Folks,
2.6.8-rc4-mm1 panics when booting (aic7xxx) with lots of SCSI ABORT
and sens code errors.
IDE ports give also failed probe messages.
This is on AMD/nForce2 based system under Slackware 10.0 with
2.6.8-rc4-mm1 kernel compiled using GCC 3.3.4. Last kernel that worked
was 2.6.8-rc3-mm1.
The 2.6.8-rc3-mm2 flag pci=routeirq which Andrew suggested works and
boots this kernel.
Below is the full dmesg/lspci output.
Thanks,
Paul
--
FreeBSD the Power to Serve!
[-- Attachment #2: 2.6.8-rc4-mm1.report --]
[-- Type: application/octet-stream, Size: 19283 bytes --]
Linux version 2.6.8-rc4-mm1 (root@blaze) (gcc version 3.3.4) #1 Tue Aug 10 14:30:45 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5360
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f6d70
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7640
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Initializing CPU#0
Kernel command line: BOOT_IMAGE=Slackware ro root=801 rootflags=quota pci=routeirq
CPU 0 irqstacks, hard=c042c000 soft=c042b000
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2204.758 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035168k/1048512k available (2214k kernel code, 12692k reserved, 818k data, 184k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4358.14 BogoMIPS (lpj=2179072)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 3200+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 56k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfaee0, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** Routing PCI interrupts for all devices because "pci=routeirq"
** was specified. If this was required to make a driver work,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 23 (level, high) -> IRQ 23
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 22
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 21
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 20
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 22
ACPI: PCI Interrupt Link [APCI] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 21 (level, high) -> IRQ 21
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 20 (level, high) -> IRQ 20
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 22 (level, high) -> IRQ 22
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 (level, high) -> IRQ 17
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 16 (level, high) -> IRQ 16
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 17 (level, high) -> IRQ 17
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 19 (level, high) -> IRQ 19
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:581c
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Console: switching to colour frame buffer device 128x48
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD300BB-00AUA1, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 58631231 sectors (30019 MB)
native capacity is 58633344 sectors (30020 MB)
hda: 58631231 sectors (30019 MB) w/2048KiB Cache, CHS=58165/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 (level, high) -> IRQ 17
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi0:A:3): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
Vendor: PLEXTOR Model: CD-ROM PX-40TW Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16)
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:6): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
Vendor: IBM Model: DDYS-T36950N Rev: S80D
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:6:0: Tagged Queuing enabled. Depth 32
Found Controller: IT8212 UDMA/ATA133 RAID Controller
FindDevices: device 0 is IDE
Channel[0] BM-DMA at 0x9800-0x9807
Channel[1] BM-DMA at 0x9808-0x980F
scsi1 : ITE RAIDExpress133
Vendor: ITE Model: IT8212F Rev: 1.45
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
SCSI device sdb: 468883200 512-byte hdwr sectors (240068 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
RAMDISK: Couldn't find valid RAM disk image starting at 0.
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 184k freed
Adding 248968k swap on /dev/sda7. Priority:-1 extents:1
Real Time Clock Driver v1.12
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
XFS mounting filesystem sda5
Ending clean XFS mount for filesystem: sda5
XFS mounting filesystem sda6
Ending clean XFS mount for filesystem: sda6
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.3.19-k2-NAPI
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 16 (level, high) -> IRQ 16
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1226 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[e6084000-e60847ff] Max Packet=[2048]
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 20 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49424 usecs
intel8x0: clocking to 47447
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.28.
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci1394: fw-host0: SelfID received outside of bus reset sequence
eth1: no link during initialization.
eth1: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:04.0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 20
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 20, pci mem f8be8000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
ieee1394: Host added: ID:BUS[0-00:1023] GUID[8a1cc7ffff0020ed]
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 22, pci mem f8bea000
ip1394: $Rev: 1231 $ Ben Collins <bcollins@debian.org>
ip1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 21
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 21, pci mem f8c7e000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xb0000000
ohci_hcd 0000:00:02.1: wakeup
usb 2-1: new low speed USB device using address 2
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 2-2: new full speed USB device using address 3
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 3 ports detected
usb 3-1: new full speed USB device using address 2
usb 2-2.1: new low speed USB device using address 4
input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-2.1
input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-2.1
USB Universal Host Controller Interface driver v2.2
nfs warning: mount version older than kernel
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
eth1: no IPv6 routers present
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 19 (level, high) -> IRQ 19
[fglrx] module loaded - fglrx 3.11.1 [Aug 4 2004] on minor 0
[fglrx] module unloaded - fglrx 3.11.1 [Aug 4 2004] on minor 0
======================= lspci =========================
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:09.0 SCSI storage controller: Adaptec AHA-2940U2/U2W
01:0b.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
01:0c.0 RAID bus controller: Integrated Technology Express, Inc. IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be IT8212, embedded seems (rev 10)
03:00.0 VGA compatible controller: ATI Technologies Inc RV350 AR [Radeon 9600]
03:00.1 Display controller: ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary)
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: 2.6.8-rc4-mm1
2004-08-11 3:33 2.6.8-rc4-mm1 Diffie
@ 2004-08-11 15:36 ` Randy.Dunlap
2004-08-11 22:57 ` 2.6.8-rc4-mm1 Bjorn Helgaas
1 sibling, 0 replies; 21+ messages in thread
From: Randy.Dunlap @ 2004-08-11 15:36 UTC (permalink / raw)
To: Diffie; +Cc: akpm, bjorn.helgaas, linux-kernel
On Tue, 10 Aug 2004 23:33:30 -0400 Diffie wrote:
| Folks,
|
| 2.6.8-rc4-mm1 panics when booting (aic7xxx) with lots of SCSI ABORT
| and sens code errors.
| IDE ports give also failed probe messages.
|
| This is on AMD/nForce2 based system under Slackware 10.0 with
| 2.6.8-rc4-mm1 kernel compiled using GCC 3.3.4. Last kernel that worked
| was 2.6.8-rc3-mm1.
|
| The 2.6.8-rc3-mm2 flag pci=routeirq which Andrew suggested works and
| boots this kernel.
|
| Below is the full dmesg/lspci output.
Where are the aic7xxx panics?
Please use your kernel boot log message file(s) or
maybe 'dmesg -s100000' to get the complete message log.
--
~Randy
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.8-rc4-mm1
2004-08-11 3:33 2.6.8-rc4-mm1 Diffie
2004-08-11 15:36 ` 2.6.8-rc4-mm1 Randy.Dunlap
@ 2004-08-11 22:57 ` Bjorn Helgaas
2004-08-12 5:48 ` 2.6.8-rc4-mm1 Paul Blazejowski
1 sibling, 1 reply; 21+ messages in thread
From: Bjorn Helgaas @ 2004-08-11 22:57 UTC (permalink / raw)
To: Diffie; +Cc: Andrew Morton, LKML
> 2.6.8-rc4-mm1 panics when booting (aic7xxx) with lots of SCSI ABORT
> and sens code errors.
> IDE ports give also failed probe messages.
If you could capture the output of the failed kernel, that would be
helpful. I know that's a pain unless you're using a serial console.
Thanks!
Bjorn
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.8-rc4-mm1
2004-08-11 22:57 ` 2.6.8-rc4-mm1 Bjorn Helgaas
@ 2004-08-12 5:48 ` Paul Blazejowski
0 siblings, 0 replies; 21+ messages in thread
From: Paul Blazejowski @ 2004-08-12 5:48 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: Andrew Morton, LKML
On Wed, 11 Aug 2004 16:57:10 -0600, Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
> If you could capture the output of the failed kernel, that would be
> helpful. I know that's a pain unless you're using a serial console.
> Thanks!
>
> Bjorn
>
Hi Bjorn,
Yes i have taken pictures which you should get in the previous
email...sorry but my serial console does not seem to work on the other
(BSD) box thus i can't capture the raw output.
Thanks,
Paul
--
FreeBSD the Power to Serve!
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.8-rc4-mm1
@ 2004-08-12 18:49 Paul Blazejowski
2004-08-12 23:21 ` 2.6.8-rc4-mm1 Bjorn Helgaas
0 siblings, 1 reply; 21+ messages in thread
From: Paul Blazejowski @ 2004-08-12 18:49 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: Andrew Morton, Randy.Dunlap, LKML
[-- Attachment #1: Type: text/plain, Size: 2068 bytes --]
Folks,
I managed to caputre the serial console output of the boot process
with the error. Below is the full log.
And here is the lspci output:
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
Controller (rev a1)
00:05.0 Multimedia audio controller: nVidia Corporation nForce
MultiMedia audio [Via VT82C686B] (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire
(IEEE 1394) Controller (rev a3)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:09.0 SCSI storage controller: Adaptec AHA-2940U2/U2W
01:0b.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet
Controller (rev 02)
01:0c.0 RAID bus controller: Integrated Technology Express, Inc.
IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be
IT8212, embedded seems (rev 10)
03:00.0 VGA compatible controller: ATI Technologies Inc RV350 AR [Radeon 9600]
03:00.1 Display controller: ATI Technologies Inc RV350 AR [Radeon
9600] (Secondary)
Thanks,
Paul
--
FreeBSD the Power to Serve!
[-- Attachment #2: 2.6.8-rc4-mm1.txt --]
[-- Type: text/plain, Size: 19374 bytes --]
LILO 22.5.9 boot:
Loading Slackware...............................
BIOS data check successful
Linux version 2.6.8-rc4-mm1 (root@blaze) (gcc version 3.3.4) #1 Tue Aug 10 14:30:45 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5240
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f6bb0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7680
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Initializing CPU#0
Kernel command line: auto BOOT_IMAGE=Slackware ro root=801 console=ttyS0,57600n8 console=tty0 rootflags=quota
CPU 0 irqstacks, hard=c042c000 soft=c042b000
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2205.102 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035168k/1048512k available (2214k kernel code, 12692k reserved, 818k data, 184k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4358.14 BogoMIPS (lpj=2179072)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 3200+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 56k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfabc0, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
vesafb: probe of vesafb0 failed with error -6
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD300BB-00AUA1, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 58631231 sectors (30019 MB)
native capacity is 58633344 sectors (30020 MB)
hda: 58631231 sectors (30019 MB) w/2048KiB Cache, CHS=58165/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 (level, high) -> IRQ 17
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi0:A:3): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
Vendor: PLEXTOR Model: CD-ROM PX-40TW Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16)
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:6): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
Vendor: IBM Model: DDYS-T36950N Rev: S80D
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:6:0: Tagged Queuing enabled. Depth 32
Found Controller: IT8212 UDMA/ATA133 RAID Controller
FindDevices: device 0 is IDE
Channel[0] BM-DMA at 0x9800-0x9807
Channel[1] BM-DMA at 0x9808-0x980F
scsi1 : ITE RAIDExpress133
Vendor: ITE Model: IT8212F Rev: 1.45
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
SCSI device sdb: 468883200 512-byte hdwr sectors (240068 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb:<3>irq 17: nobody cared!
[<c01084ca>] __report_bad_irq+0x2a/0x90
[<c01085bc>] note_interrupt+0x6c/0xa0
[<c01088e2>] do_IRQ+0x172/0x1a0
[<c0106a64>] common_interrupt+0x18/0x20
[<c0104053>] default_idle+0x23/0x30
[<c01040bc>] cpu_idle+0x2c/0x40
[<c03f87a8>] start_kernel+0x178/0x1c0
[<c03f83b0>] unknown_bootoption+0x0/0x160
handlers:
[<c02ac050>] (ahc_linux_isr+0x0/0x290)
Disabling IRQ #17
AtapiStartIo: already have a request!
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiStartIo: already have a request!
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiStartIo: already have a request!
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiStartIo: already have a request!
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiStartIo: already have a request!
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
SCSI error : <1 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
AtapiStartIo: already have a request!
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiStartIo: already have a request!
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiStartIo: already have a request!
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiStartIo: already have a request!
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiStartIo: already have a request!
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
AtapiResetController enter
IT8212ResetAdapter: reset channel 0
IT8212ResetAdapter Success!
AtapiResetController exit
SCSI error : <1 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
unable to read partition table
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
scsi0:0:6:0: Attempting to queue an ABORT message
CDB: 0x28 0x0 0x4 0x3e 0x2e 0xce 0x0 0x0 0x8 0x0
scsi0:0:6:0: Command already completed
aic7xxx_abort returns 0x2002
scsi0:0:6:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0:0:6:0: Command already completed
aic7xxx_abort returns 0x2002
scsi0:0:6:0: Attempting to queue a TARGET RESET message
CDB: 0x28 0x0 0x4 0x3e 0x2e 0xce 0x0 0x0 0x8 0x0
scsi0:0:6:0: Command not found
aic7xxx_dev_reset returns 0x2002
scsi0:0:6:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0:0:6:0: Command already completed
aic7xxx_abort returns 0x2002
scsi0:0:6:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0: At time of recovery, card was paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-out phase, at SEQADDR 0x171
Card was paused
ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xb6] ERROR[0x0] SCSIBUSL[0xc0] LASTPHASE[0xa0]
SCSISEQ[0x12] SBLKCTL[0xa] SCSIRATE[0x0] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x2] SSTAT1[0x3] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xac] SXFRCTL0[0x88]
DFCNTRL[0x0] DFSTATUS[0x89]
STACK: 0xe4 0x0 0x166 0x17c
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info:
0 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] SCB_TAG[0x2]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0x0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
16 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
17 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
18 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
19 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
20 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
21 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
22 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
23 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
24 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
25 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
26 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
27 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
28 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
29 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
30 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
31 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
2 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0]
Kernel Free SCB list: 1 0
DevQ(0:3:0): 0 waiting
DevQ(0:4:0): 0 waiting
DevQ(0:6:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:6:0: Device is active, asserting ATN
Recovery code sleeping
Recovery code awake
Timer Expired
aic7xxx_abort returns 0x2003
scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 6 lun 0
SCSI error : <0 0 6 0> return code = 0x6000000
end_request: I/O error, dev sda, sector 71184078
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
RAMDISK: Couldn't find valid RAM disk image starting at 0.
VFS: Cannot open root device "801" or unknown-block(8,1)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1)
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: 2.6.8-rc4-mm1
2004-08-12 18:49 2.6.8-rc4-mm1 Paul Blazejowski
@ 2004-08-12 23:21 ` Bjorn Helgaas
2004-08-13 8:15 ` 2.6.8-rc4-mm1 Paul Blazejowski
0 siblings, 1 reply; 21+ messages in thread
From: Bjorn Helgaas @ 2004-08-12 23:21 UTC (permalink / raw)
To: Paul Blazejowski; +Cc: Andrew Morton, Randy.Dunlap, LKML
On Thursday 12 August 2004 12:49 pm, Paul Blazejowski wrote:
> I managed to caputre the serial console output of the boot process
> with the error. Below is the full log.
Thank you very much for the pictures and the transcript. I found a
couple bugs in the iteraid driver. Could you please try the attached
patch?
--- 2.6.8-rc4-mm1/drivers/scsi/iteraid.h.orig 2004-08-12 16:50:38.483419878 -0600
+++ 2.6.8-rc4-mm1/drivers/scsi/iteraid.h 2004-08-12 17:16:08.569338635 -0600
@@ -1203,8 +1203,8 @@
typedef struct _Adapter {
char *name; /* Adapter's name */
u8 num_channels; /* How many channels support */
- u8 irq; /* irq number */
- u8 irqOwned; /* If any irq is use */
+ unsigned int irq; /* irq number */
+ unsigned int irqOwned; /* If any irq is use */
u8 pci_bus; /* PCI bus number */
u8 devfn; /* Device and function number */
u8 offline; /* On line or off line */
--- 2.6.8-rc4-mm1/drivers/scsi/iteraid.c.orig 2004-08-12 16:43:38.700221895 -0600
+++ 2.6.8-rc4-mm1/drivers/scsi/iteraid.c 2004-08-12 17:18:19.419922969 -0600
@@ -4798,6 +4798,7 @@
pAdap->name);
return -1;
}
+ printk("%s: IRQ %d for device at %s\n", __FUNCTION__, pAdap->irq, pci_name(pPciDev));
pAdap->irqOwned = pAdap->irq;
}
@@ -4901,12 +4902,17 @@
if (PCI_FUNC(pPciDev->devfn))
continue;
+ if (pci_enable_device(pPciDev))
+ continue;
+
+ printk("%s: device at %s\n", __FUNCTION__, pci_name(pPciDev));
/*
* Allocate memory for Adapter.
*/
pAdap = (PITE_ADAPTER) kmalloc(sizeof(ITE_ADAPTER), GFP_ATOMIC);
if (pAdap == NULL) {
printk("iteraid_detect: pAdap allocate failed.\n");
+ pci_disable_device(pPciDev);
continue;
}
memset(pAdap, 0, sizeof(ITE_ADAPTER));
@@ -5016,6 +5022,7 @@
if (pAdap->IDEChannel != NULL) {
kfree(pAdap->IDEChannel);
}
+ pci_disable_device(pAdap->pci_dev);
if (pAdap != NULL) {
kfree(pAdap);
}
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: 2.6.8-rc4-mm1
2004-08-12 23:21 ` 2.6.8-rc4-mm1 Bjorn Helgaas
@ 2004-08-13 8:15 ` Paul Blazejowski
0 siblings, 0 replies; 21+ messages in thread
From: Paul Blazejowski @ 2004-08-13 8:15 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: Andrew Morton, Randy.Dunlap, LKML
[-- Attachment #1: Type: text/plain, Size: 2769 bytes --]
Bjorn,
Thank you for the patch. I applied it and now the kernel boots fine.
Attached is the dmesg from successful boot.
Regards,
Paul
--
FreeBSD the Power to Serve!
On Thu, 12 Aug 2004 17:21:46 -0600, Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
>
> Thank you very much for the pictures and the transcript. I found a
> couple bugs in the iteraid driver. Could you please try the attached
> patch?
>
> --- 2.6.8-rc4-mm1/drivers/scsi/iteraid.h.orig 2004-08-12 16:50:38.483419878 -0600
> +++ 2.6.8-rc4-mm1/drivers/scsi/iteraid.h 2004-08-12 17:16:08.569338635 -0600
> @@ -1203,8 +1203,8 @@
> typedef struct _Adapter {
> char *name; /* Adapter's name */
> u8 num_channels; /* How many channels support */
> - u8 irq; /* irq number */
> - u8 irqOwned; /* If any irq is use */
> + unsigned int irq; /* irq number */
> + unsigned int irqOwned; /* If any irq is use */
> u8 pci_bus; /* PCI bus number */
> u8 devfn; /* Device and function number */
> u8 offline; /* On line or off line */
> --- 2.6.8-rc4-mm1/drivers/scsi/iteraid.c.orig 2004-08-12 16:43:38.700221895 -0600
> +++ 2.6.8-rc4-mm1/drivers/scsi/iteraid.c 2004-08-12 17:18:19.419922969 -0600
> @@ -4798,6 +4798,7 @@
> pAdap->name);
> return -1;
> }
> + printk("%s: IRQ %d for device at %s\n", __FUNCTION__, pAdap->irq, pci_name(pPciDev));
> pAdap->irqOwned = pAdap->irq;
> }
>
> @@ -4901,12 +4902,17 @@
> if (PCI_FUNC(pPciDev->devfn))
> continue;
>
> + if (pci_enable_device(pPciDev))
> + continue;
> +
> + printk("%s: device at %s\n", __FUNCTION__, pci_name(pPciDev));
> /*
> * Allocate memory for Adapter.
> */
> pAdap = (PITE_ADAPTER) kmalloc(sizeof(ITE_ADAPTER), GFP_ATOMIC);
> if (pAdap == NULL) {
> printk("iteraid_detect: pAdap allocate failed.\n");
> + pci_disable_device(pPciDev);
> continue;
> }
> memset(pAdap, 0, sizeof(ITE_ADAPTER));
> @@ -5016,6 +5022,7 @@
> if (pAdap->IDEChannel != NULL) {
> kfree(pAdap->IDEChannel);
> }
> + pci_disable_device(pAdap->pci_dev);
> if (pAdap != NULL) {
> kfree(pAdap);
> }
>
[-- Attachment #2: 2.6.8-rc4-mm1-patchup-dmesg.txt --]
[-- Type: text/plain, Size: 16674 bytes --]
Linux version 2.6.8-rc4-mm1 (root@blaze) (gcc version 3.4.1) #2 Fri Aug 13 03:00:04 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5360
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f6d70
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7640
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Initializing CPU#0
Kernel command line: BOOT_IMAGE=Slackware ro root=801 console=ttyS0,57600n8 console=tty0 rootflags=quota
CPU 0 irqstacks, hard=c0439000 soft=c0438000
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2204.979 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035116k/1048512k available (2304k kernel code, 12744k reserved, 784k data, 180k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4358.14 BogoMIPS (lpj=2179072)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 3200+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 56k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfaee0, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:581c
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Console: switching to colour frame buffer device 128x48
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD300BB-00AUA1, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 58631231 sectors (30019 MB)
native capacity is 58633344 sectors (30020 MB)
hda: 58631231 sectors (30019 MB) w/2048KiB Cache, CHS=58165/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 (level, high) -> IRQ 17
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi0:A:3): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
Vendor: PLEXTOR Model: CD-ROM PX-40TW Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16)
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:6): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
Vendor: IBM Model: DDYS-T36950N Rev: S80D
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:6:0: Tagged Queuing enabled. Depth 32
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 17 (level, high) -> IRQ 17
iteraid_detect: device at 0000:01:0c.0
Found Controller: IT8212 UDMA/ATA133 RAID Controller
iteraid_init: IRQ 17 for device at 0000:01:0c.0
FindDevices: device 0 is IDE
Channel[0] BM-DMA at 0x9800-0x9807
Channel[1] BM-DMA at 0x9808-0x980F
scsi1 : ITE RAIDExpress133
Vendor: ITE Model: IT8212F Rev: 1.45
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
SCSI device sdb: 468883200 512-byte hdwr sectors (240068 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
RAMDISK: Couldn't find valid RAM disk image starting at 0.
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 180k freed
Adding 248968k swap on /dev/sda7. Priority:-1 extents:1
Real Time Clock Driver v1.12
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
XFS mounting filesystem sda5
Ending clean XFS mount for filesystem: sda5
XFS mounting filesystem sda6
Ending clean XFS mount for filesystem: sda6
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.3.19-k2-NAPI
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 16 (level, high) -> IRQ 16
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1226 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[e6084000-e60847ff] Max Packet=[2048]
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49414 usecs
intel8x0: clocking to 47437
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.28.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 20 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci1394: fw-host0: SelfID received outside of bus reset sequence
eth1: no link during initialization.
eth1: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:04.0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 22 (level, high) -> IRQ 22
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 22, pci mem f8bea000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 21 (level, high) -> IRQ 21
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
ieee1394: Host added: ID:BUS[0-00:1023] GUID[8a1cc7ffff0020ed]
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 21, pci mem f8bec000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ip1394: $Rev: 1231 $ Ben Collins <bcollins@debian.org>
ip1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 20 (level, high) -> IRQ 20
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 20, pci mem f8c80000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xb0000000
ohci_hcd 0000:00:02.1: wakeup
usb 2-1: new low speed USB device using address 2
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 2-2: new full speed USB device using address 3
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 3 ports detected
usb 3-1: new full speed USB device using address 2
usb 2-2.1: new low speed USB device using address 4
input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-2.1
input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-2.1
USB Universal Host Controller Interface driver v2.2
nfs warning: mount version older than kernel
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present
eth0: no IPv6 routers present
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.8-rc4-mm1
@ 2004-08-10 18:38 Diffie
0 siblings, 0 replies; 21+ messages in thread
From: Diffie @ 2004-08-10 18:38 UTC (permalink / raw)
To: Andrew Morton; +Cc: LKML
Andrew,
This is a cosmetic change to the IT8212 RAID driver.
when compiling it prints:
CC drivers/scsi/iteraid.o
In file included from drivers/scsi/iteraid.c:260:
drivers/scsi/hosts.h:1:2: warning: #warning "This file is obsolete,
please use <scsi/scsi_host.h> instead"
Patch below:
diffstat output:
iteraid.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
--- drivers/scsi/iteraid.c-orig 2004-08-10 14:30:54.000000000 -0400
+++ drivers/scsi/iteraid.c 2004-08-10 14:31:58.000000000 -0400
@@ -257,7 +257,7 @@
#include <asm/uaccess.h>
#include "scsi.h"
-#include "hosts.h"
+#include <scsi/scsi_host.h>
#include "iteraid.h"
MODULE_LICENSE("GPL");
Cheers,
Paul
--
FreeBSD the Power to Serve!
^ permalink raw reply [flat|nested] 21+ messages in thread* 2.6.8-rc4-mm1
@ 2004-08-10 7:21 Andrew Morton
2004-08-10 16:37 ` 2.6.8-rc4-mm1 Jesse Barnes
2004-08-11 0:12 ` 2.6.8-rc4-mm1 Tom Vier
0 siblings, 2 replies; 21+ messages in thread
From: Andrew Morton @ 2004-08-10 7:21 UTC (permalink / raw)
To: linux-kernel
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc4/2.6.8-rc4-mm1/
- Mainly little fixes. Some recovery from damage due to the recent large
influx of patches.
- I am offline for the rest of the week.
Changes since 2.6.8-rc3-mm2:
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-dma-declare-coherent-memory.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-drm.patch
bk-ieee1394.patch
bk-input.patch
bk-libata.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-pnp.patch
bk-power.patch
bk-scsi.patch
bk-usb.patch
Latest versions of external trees
-fix-acpi_system_write_wakeup_device-prototype.patch
-boolean-typo-in-dvb.patch
Merged
+procfs-taskname-locking.patch
Add locking around task_struct.comm
+nmi-build-fix.patch
Update nmi-trigger-switch-support-for-debuggingupdated.patch for sysctl
changes
+ppc32-remove-hardcoded-offsets-from-ppc-asm.patch
+ppc32-optimize-fix-timer_interrupt-loop.patch
ppc32 updates
+blk_queue_free_tags-fix.patch
+blk_resize_tags-fix.patch
+blk_queue_tags_resize_failure.patch
Tag handling fixes for the block barrier patches
+perfctr-x86-update.patch
+perfctr-ppc32-sysctl-warning-fix.patch
+perfctr-inheritance-locking-fix.patch
perfctr fixes
+dont-pass-mem_map-into-init-functions-x86-fix.patch
+dont-pass-mem_map-into-init-functions-even-more-fixes.patch
More fixes for the extensively-fixed
dont-pass-mem_map-into-init-functions.patch
+add-pci_fixup_enable-pass.patch
Add another pass to the PCI fixup handling
+cciss-congig-dependency-fix.patch
Kconfig fix
+video-mode-handling-linked-list-of-video-modes.patch
+video-mode-handling-linked-list-of-video-modes-build-fix.patch
+video-mode-handling-save-per-display-graphics-display-settings.patch
+video-mode-handling-delete-entries-from-mode-list.patch
+video-mode-handling-reduce-memory-footprint-of-fbdev.patch
Revamp the fbdev video mode handling
+cdrom-mo-drive-open-write-fix.patch
Fix opening modes of MO CDROMs
+x86-pae-swapspace-expansion.patch
Allow more and larger swpadevs on x86 PAE
+executable-hugetlb-pages.patch
permit executable higetlbpages
+knfsd-fix-brokenness-with-fsid=-export-option.patch
kernel NFS server fix
+md-fix-problems-with-checksum-handling-in-md-superblocks.patch
MD fix
+sk98lin-no-procfs-build-fix.patch
+fix-net-hamradio-dmascc-with-gcc-34-fwd.patch
+fix-warnings-in-es7000.patch
+reduce-aacraid-namespace-pollution.patch
Minor fixes
+reduce-bkl-usage-in-do_coredump.patch
Reduce lock_kernel() coverage in the coredump code
+ide-do-spin-up-for-all-platforms.patch
IDE cleanup
+apm_infodisabled-fix.patch
Fix APM disabling code
+267-rc3-mm2-inlining-failures.patch
Build fix
+qlogic-isp2x00-remove-needless-busyloop.patch
Remove a pointless delay in this driver
+high2lowuid-warning-fix.patch
Warning fix
+new-cpu_has_-flags.patch
Add new cpu_has* flags for xstore features
+qla2xxx-allocation-mode-fix.patch
Fix possible deadlock in this scsi driver
+scsi-gdth-kill-define-__devinitdata.patch
data section fix
+get_nodes-mask-miscalculation.patch
NUMA mmepolicy fix
+remove-spaces-from-pci-ide-pci_drivername-field.patch
Sane filenames in /sys
All 529 patches:
procfs-taskname-locking.patch
proc fs task name locking fix
fix-reading-string-module-parameters-in-sysfs.patch
fix reading string module parameters in sysfs
sysfs-backing-store-add-sysfs_dirent-to-sysfs-dentry.patch
sysfs backing store: add sysfs_dirent to sysfs dentry
sysfs-backing-store-use-sysfs_dirent-tree-for-readdir-etc.patch
sysfs backing store: use sysfs_dirent tree for ->readdir etc.
sysfs-backing-store-free-sysfs_dirent-on-file-removal.patch
sysfs backing store: free sysfs_dirent on file removal
sysfs-backing-store-change-sysfs_file_operations.patch
sysfs backing store: change sysfs_file_operations
sysfs-backing-store-stop-pinning-dentries-inodes-for-leaves.patch
sysfs backing store: stop pinning dentries & inodes for leaves
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-dma-declare-coherent-memory.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-drm.patch
bk-ieee1394.patch
bk-input.patch
bk-libata.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-pnp.patch
bk-power.patch
bk-scsi.patch
bk-usb.patch
mm.patch
add -mmN to EXTRAVERSION
bk-netdev-axnet_cs-fix.patch
bk-netdev-axnet_cs-fix
bk-netdev-hp-plus-fix.patch
bk-netdev-hp-plus-fix
mm-swsusp-make-sure-we-do-not-return-to-userspace-where-image-is-on-disk.patch
-mm swsusp: make sure we do not return to userspace where image is on disk
mm-swsusp-copy_page-is-harmfull.patch
-mm swsusp: copy_page is harmfull
sound-control-build-fix.patch
sound/core/control.c build fix
nmi-trigger-switch-support-for-debuggingupdated.patch
NMI trigger switch support for debugging(updated)
nmi-trigger-switch-support-for-debuggingupdated-fix.patch
nmi-trigger-switch-support-for-debuggingupdated-fix
nmi-build-fix.patch
nmi-build-fix
make-i386-die-more-resilient-against-recursive-errors.patch
Make i386 die() more resilient against recursive errors
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks
kgdb-ga.patch fix for i386 single-step into sysenter
fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-ia64-support.patch
IA64 kgdb support
ia64 kgdb repair and cleanup
ia64 kgdb fix
kgdb-ia64-fixes.patch
kgdb: ia64 fixes
make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock
must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix update
mustfix lists
ppc32-remove-hardcoded-offsets-from-ppc-asm.patch
ppc32: remove hardcoded offsets from ppc asm
ppc32-optimize-fix-timer_interrupt-loop.patch
ppc32: optimize/fix timer_interrupt loop
ppc64-reloc_hide.patch
invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes
dev-mem-restriction-patch.patch
/dev/mem restriction patch
get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem
fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card
pid_max-fix.patch
Bug when setting pid_max > 32k
jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
oops-dump-preceding-code.patch
i386 oops output: dump preceding code
lockmeter.patch
lockmeter
ia64 CONFIG_LOCKMETER fix
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
ext3_rsv_cleanup.patch
ext3 block reservation patch set -- ext3 preallocation cleanup
ext3_rsv_base.patch
ext3 block reservation patch set -- ext3 block reservation
ext3 reservations: fix performance regression
ext3 block reservation patch set -- mount and ioctl feature
ext3 block reservation patch set -- dynamically increase reservation window
ext3 reservation ifdef cleanup patch
ext3 reservation max window size check patch
ext3 reservation file ioctl fix
ext3-reservation-default-on.patch
ext3 reservation: default to on
ext3-lazy-discard-reservation-window-patch.patch
ext3 lazy discard reservation window patch
ext3 discard reservation in last iput fix patch
Fix lazy reservation discard
ext3 reservations: bad_inode fix
ext3 reservation discard race fix
really-ptrace-single-step-2.patch
ptrace single-stepping fix
ipr-ppc64-depends.patch
Make ipr.c require ppc
disk-barrier-core.patch
disk barriers: core
disk-barrier-core-tweaks
disk-barrier-ide.patch
disk barriers: IDE
disk-barrier-ide-symbol-expoprt
disk-barrier ide warning fix
barrier-update.patch
barrier update
barrier-flushing-fix.patch
barrier flushing fix
disk-barrier-scsi.patch
disk barriers: scsi
disk-barrier-dm.patch
disk barriers: devicemapper
disk-barrier-md.patch
disk barriers: MD
barrier-md-fix.patch
barriers: md fix
2-2-md-multipathing-fixes.patch
md: fix multipath for readhead requests
reiserfs-v3-barrier-support.patch
reiserfs v3 barrier support
reiserfs-v3-barrier-support-tweak
sync_dirty_buffer-retval.patch
make sync_dirty_buffer() return something useful
ext3-barrier-support.patch
ext3 barrier support
jbd-barrier-fallback-on-failure.patch
jbd: barrier fallback on failure
ide-print-failed-opcode.patch
ide: print failed opcode on IO errors
From: Jens Axboe <axboe@suse.de>
Subject: Re: ide errors in 7-rc1-mm1 and later
add-bh_eopnotsupp-for-testing.patch
add BH_Eopnotsupp for testing async barrier failures
handle-async-barrier-failures.patch
Handle async barrier failures
blk_queue_free_tags-fix.patch
blk_queue_free_tags() fix
blk_resize_tags-fix.patch
blk_resize_tags() fix
blk_queue_tags_resize_failure.patch
handle blk_queue_tags_resize() allocation failures
multipath-readahead-fix-fix.patch
multipath readahead fix fix
tty_io-hangup-locking.patch
tty_io.c hangup locking
perfctr-core.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][1/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: core
CONFIG_PERFCTR=n build fix
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][6/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: misc
perfctr-i386.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][2/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: i386
perfctr #if/#ifdef cleanup
perfctr Dothan support
perfctr x86_tests build fix
perfctr-x86-init-bug.patch
perfctr x86 init bug
perfctr-k8-fix-for-internal-benchmarking-code.patch
perfctr: K8 fix for internal benchmarking code
perfctr-x86-update.patch
perfctr x86 update
perfctr-x86_64.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][3/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: x86_64
perfctr-ppc.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][4/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: PowerPC
perfctr ppc32 update
perfctr update 4/6: PPC32 cleanups
perfctr-ppc32-buglet-fix.patch
perfctr ppc32 buglet fix
perfctr-ppc32-sysctl-warning-fix.patch
perfctr ppc32 sysctl warning fix
perfctr-virtualised-counters.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][5/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: virtualised counters
perfctr update 6/6: misc minor cleanups
perfctr update 3/6: __user annotations
perfctr-cpus_complement-fix
perfctr cpumask cleanup
perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup
perfctr-update-2-6-kconfig-related-updates.patch
perfctr update 2/6: Kconfig-related updates
perfctr-update-5-6-reduce-stack-usage.patch
perfctr update 5/6: reduce stack usage
perfctr-low-level-documentation.patch
perfctr low-level documentation
perfctr-documentation-update.patch
perfctr documentation update
perfctr-inheritance-1-3-driver-updates.patch
perfctr inheritance 1/3: driver updates
perfctr-inheritance-illegal-sleep-bug.patch
perfctr inheritance illegal sleep bug
perfctr-inheritance-2-3-kernel-updates.patch
perfctr inheritance 2/3: kernel updates
perfctr-inheritance-3-3-documentation-updates.patch
perfctr inheritance 3/3: documentation updates
perfctr-inheritance-locking-fix.patch
perfctr inheritance locking fix
ext3-online-resize-patch.patch
ext3: online resizing
ext3-online-resize-warning-fix.patch
ext3-online-resize-warning-fix
sched-timeslice-fix.patch
sched: fix timeslice calculations for HZ=1000.
sched-clean-init-idle.patch
sched: cleanup init_idle()
sched-clean-fork.patch
sched: cleanup, improve sched <=> fork APIs
sched-clean-fork-rename-wake_up_new_process-wake_up_new_task.patch
sched: rename wake_up_new_process -> wake_up_new_task
kernelthread-idle-fix-2.patch
kernel thread idle fix
sched-misc-cleanups-2.patch
sched: misc cleanups #2
sched-unlikely-rt_task.patch
sched: make rt_task unlikely
sched-misc.patch
sched: sched misc changes
sched-misc-fix-rt.patch
sched: fix RT scheduling & interactivity estimator
sched-no-balance-clone.patch
sched: disable balance on clone
sched-remove-balance-clone.patch
sched: remove balance on clone
sched-fork-hotplug-cleanuppatch.patch
sched: fork hotplug hanling cleanup
sched-consolidate-sched-domains.patch
sched: consolidate sched domains
sched-consolidate-sched-domains-ppc64-fix.patch
sched-consolidate-sched-domains ppc64 fix
sched-consolidate-domains-fix.patch
sched: fix for sched-consolidate-domains
sched-consolidate-domains-fix-2.patch
another sched consolidate domains fix
sched-domain-node-span-4.patch
sched: limit cpuspan of node scheduler domains
sched-merge-fix.patch
sched: merge fix
sched-domain-node-span-4-warning-fix.patch
sched-domain-node-span-4-warning-fix
sched-isolated-sched-domains.patch
sched: isolated sched domains
sched-isolated-sched-domains-fix.patch
sched-isolated-sched-domains-fix
create-cpu_sibling_map-for-ppc64.patch
Create cpu_sibling_map for PPC64
create-cpu_sibling_map-for-ppc64-fix.patch
create-cpu_sibling_map-for-ppc64-fix
sched-adjust-p4-per-cpu-gain.patch
sched: adjust p4 per-cpu gain
schedstat-v10.patch
scheduler statistics
sched-init_idle-fork_by_hand-consolidation.patch
sched: consolidate init_idle() and fork_by_hand()
sched-sparc32-fix.patch
sched: sparc32 fixes
sched-sparc32-fix-fix.patch
sun4d fork_idle() fix
schedstat-up-fix.patch
schedstat: UP fix
SMP fix --
for_each_domain() is not defined if not CONFIG_SMP, so show_schedstat
needed a couple of extra ifdefs.
Signed-off-by: Rick Lindsley <ricklind@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
sched-whitespace-cleanups.patch
sched: whitespace cleanups
sched-nonlinear-timeslicespatch.patch
sched: nonlinear timeslices
sched-single-array.patch
sched: disable array switching
memory-backed-inodes-fix.patch
memory-backed inodes fix
ext3_bread-cleanup.patch
ext3_bread() cleanup
flexible-mmap-2.6.7-mm3-A8.patch
i386 virtual memory layout rework
flexible-mmap-bug-fix.patch
flexible-mmap BUG fix
flexible-mmap-updatepatch-267-mm5.patch
flexible-mmap update
sysctl-tunable-for-flexmmap.patch
sysctl tunable for flexmmap
legacy_va_layout-docs.patch
legacy_va_layout docs
flex-mmap-for-s390x.patch
flex mmap for s390(x)
pcmcia-implement-driver-model-support.patch
pcmcia: implement driver model support
pcmcia-update-network-drivers.patch
pcmcia: update network drivers
pcmcia-update-wireless-drivers.patch
pcmcia: update wireless drivers
pcmcia-fix-eject-lockup.patch
pcmcia: fix eject lockup
pcmcia-add-hotplug-support.patch
pcmcia: add *hotplug support
posix-locking-fix-to-posix_same_owner.patch
posix locking: Minimal fix to posix_same_owner()
posix-locking-fix-to-locking-code.patch
posix locking: more locking code fixes
posix-locking-fix-up-nfs4statec.patch
posix locking: Fix up nfs4state.c
posix-locking-fix-up-lockd.patch
posix locking: Fix up lockd to make use of the new interface
posix-locking-fl_owner_t-to-pid-mapping.patch
posix locking: mapping between fl_owner_t and client-side "pid"
dvdrw-support-for-267-bk13.patch
DVD+RW support for 2.6.7-bk13
cdrw-packet-writing-support-for-267-bk13.patch
CDRW packet writing support
packet-remove-warning.patch
packet: remove #warning
packet-door-unlock.patch
packet writing: door unlocking fix
pkt_lock_door() warning fix
dvd-rw-packet-writing-update.patch
Packet writing support for DVD-RW and DVD+RW discs.
fix-race-in-pktcdvd-kernel-thread-handling.patch
Fix race in pktcdvd kernel thread handling
fix-open-close-races-in-pktcdvd.patch
Fix open/close races in pktcdvd
packet-writing-review-fixups.patch
packet writing: review fixups
remove-pkt_dev-from-struct-pktcdvd_device.patch
Remove pkt_dev from struct pktcdvd_device
packet-writing-docco.patch
packet writing documentation
trivial-cdrw-packet-writing-doc-update.patch
Trivial CDRW packet writing doc update
convert-packet-writing-to-seq_file.patch
packet writing: convert to seq_file
control-pktcdvd-with-an-auxiliary-character-device.patch
Control pktcdvd with an auxiliary character device
Subject: Re: 2.6.8-rc2-mm2
control-pktcdvd-with-an-auxiliary-character-device-fix.patch
control-pktcdvd-with-an-auxiliary-character-device-fix
simplified-request-size-handling-in-cdrw-packet-writing.patch
Simplified request size handling in CDRW packet writing
fix-setting-of-maximum-read-speed-in-cdrw-packet-writing.patch
Fix setting of maximum read speed in CDRW packet writing
r8169_napi-help-text-2.patch
R8169_NAPI help text
no-sysgood-for-ptrace-singlestep.patch
Don't use SYSGOOD for ptrace singlestep
err2-6-hashbin_remove_this-locking-fix.patch
err2-6: hashbin_remove_this() locking fix
dm-use-idr.patch
devicemapper: use an IDR tree for tracking minors
ipc-1-3-add-refcount-to-ipc_rcu_alloc.patch
ipc: Add refcount to ipc_rcu_alloc
ipc-2-3-remove-sem_revalidate.patch
ipc: remove sem_revalidate
ipc-3-3-enforce-semvmx-limit-for-undo.patch
ipc: enforce SEMVMX limit for undo
cleanup-of-ipc-msgc.patch
cleanup of ipc/msg.c
sk98lin-procfs-fix.patch
sk98lin procfs fix
cpufreq-driver-for-nforce2-kernel-267.patch
cpufreq driver for nForce2
allow-modular-ide-pnp.patch
allow modular ide-pnp
uml-base-patch.patch
uml: Uml base patch
uml-sched-update.patch
uml-sched-update
rename-uml-console-device.patch
uml: rename console_device
uml-readds-just-for-now-ghashh-for-uml.patch
uml: Readds (just for now) ghash.h for UML
uml-avoid-that-gcc-breaks-uml-with-unit-at-a-time-compilation-mode.patch
uml: Avoid that gcc breaks UML with "unit at a time" compilation mode.
uml-fixes-an-host-fd-leak-caused-by-hostfs.patch
uml: Fixes an host fd leak caused by hostfs.
uml-adds-legacy_pty-config-option.patch
uml: Adds LEGACY_PTY config option
uml-makes-make-help-arch=um-work.patch
uml: Makes "make help ARCH=um" work.
uml-fixes-fixdepc-to-support-arch-um-include-uml-configh.patch
uml: Fixes "fixdep.c" to support arch/um/include/uml-config.h.
uml-kill-useless-warnings.patch
uml: Kill useless warnings
uml-avoids-compile-failure-when-host-misses-tkill.patch
uml: Avoids compile failure when host misses tkill().
uml-reduces-code-in-_user-files-by-moving-it-in-_kern-files-if-already-possible.patch
uml: Reduces code in *_user files, by moving it in _kern files if already possible.
uml-fixes-raw-and-uses-it-in-check_one_sigio-also-fixes-a-silly-panic-eintr-returned-by-call.patch
uml: Fixes raw() and uses it in check_one_sigio; also fixes a silly panic (EINTR returned by call).
uml-folds-hostaudio_userc-into-hostaudio_kernc.patch
uml: Folds hostaudio_user.c into hostaudio_kern.c.
uml-use-ptrace_scemu-the-so-called-sysemu-to-reduce-syscall-cost.patch
uml: Use PTRACE_SCEMU (the so-called SYSEMU) to reduce syscall cost.
uml-adds-the-nosysemu-command-line-parameter-to-disable-sysemu.patch
uml: Adds the "nosysemu" command line parameter to disable SYSEMU
uml-adds-proc-sysemu-to-toggle-sysemu-usage.patch
uml: Adds /proc/sysemu to toggle SYSEMU usage.
uml-fix-for-sysemu-patches.patch
uml: Fix for sysemu patches
uml-handles-correctly-errno-==-eintr-in-lots-of-places.patch
uml: Handles correctly errno == EINTR in lots of places.
uml-adds-some-exports.patch
uml: Adds some exports
uml-avoids-a-panic-for-a-legal-situation.patch
uml: Avoids a panic for a legal situation
uml-removes-dead-code-in-trap_kernc.patch
uml: Removes dead code in trap_kern.c
uml-make-malloc-call-vmalloc-if-needed-needed-for-hostfs-on-26-host.patch
uml: Make malloc() call vmalloc if needed. Needed for hostfs on 2.6 host.
uml-little-kmalloc.patch
uml: little-kmalloc
uml-fix-os_process_pc-and-os_process_parent-for-corner-cases.patch
uml: Fix os_process_pc and os_process_parent for corner cases.
uml-remove-a-group-of-unused-bh-functions.patch
uml: remove a group of unused bh functions
fix-warnings-in-net-irda.patch
sparse: fix warnings in net/irda/*
i810_audio-fix-the-error-path-of-resource-management.patch
i810_audio: Fix the error path of resource management
fix-drivers-isdn-hisax-avm_pcic-build-warning-when.patch
Fix drivers/isdn/hisax/avm_pci.c build warning when !CONFIG_ISAPNP
idr-stale-comment.patch
idr.c: remove stale comment
idr-comments-updates.patch
idr comments updates
schedule-profiling.patch
schedule() profiling
From: Arjan van de Ven <arjanv@redhat.com>
Subject: Re: schedule profileing
add-a-few-might_sleep-checks.patch
Add a few might_sleep() checks
add-a-few-might_sleep-checks-fix.patch
add-a-few-might_sleep-checks fix
even-more-might_sleep-checks.patch
even more might_sleep() checks
tmpfs-atomicity-fix.patch
tmpfs atomicity fix
release_task-may-sleep.patch
permit sleeping in release_task()
crc16-renaming-in-via-velocity-ethernet-driver.patch
CRC16 renaming in VIA Velocity ethernet driver
per_cpu-per_cpu-cpu_gdt_table.patch
percpu: cpu_gdt_table
per_cpu-per_cpu-cpu_gdt_table-fix.patch
per_cpu-per_cpu-cpu_gdt_table-fix
per_cpu-per_cpu-init_tss.patch
percpu: init_tss
per_cpu-per_cpu-cpu_tlbstate.patch
percpu: cpu_tlbstate
gcc35-alps_tdlb7.c.patch
gcc-3.5 fixes
gcc35-always-inline.patch
gcc-3.5 fixes
gcc35-auerswald.c.patch
gcc-3.5 fixes
gcc35-dabusb.c.patch
gcc-3.5 fixes
gcc35-ds.c.patch
gcc-3.5 fixes
gcc35-fixmap.h.patch
gcc-3.5: fixmap.h fix
gcc35-mtrr.h.patch
gcc-3.5 fixes
gcc35-sonypi.patch
gcc-3.5 fixes
gcc35-sp887x.c.patch
gcc-3.5 fixes
gcc35-tda1004x.c.patch
gcc-3.5 fixes
gcc35-transport.h.patch
gcc-3.5 fixes
gcc35-ufs_fs.h.patch
gcc-3.5 fixes
gcc35-videodev.c.patch
gcc-3.5 fixes
gcc35-wavefront_fx.c.patch
gcc-3.5 fixes
dev-zero-vs-hugetlb-mappings.patch
/dev/zero vs hugetlb mappings.
hugetlbfs-private-mappings.patch
hugetlbfs private mappings
net-kconfig-crc16-fix.patch
net/Kconfig crc16 warning fix
preset-loops_per_jiffy-for-faster-booting.patch
preset loops_per_jiffy for faster booting
define-inline-as-__attribute__always_inline-also-for-gcc-=-34.patch
#define inline as __attribute__((always_inline)) also for gcc >= 3.4
gcc-34-and-broken-inlining.patch
clean up __always_inline__ usage
handle-undefined-symbols.patch
Fail if vmlinux contains undefined symbols
sparc32-ignore-undefined-symbols-with-3-or-more-leading-underscores.patch
sparc32: ignore undefined symbols with 3 or more leading underscores
268-rc2-mm1-link-errors.patch
put irq stacks back into bss
split-generic_file_aio_write-into-buffered-and-direct-i-o-parts.patch
split generic_file_aio_write into buffered and direct I/O parts
making-i-dhash_entries-cmdline-work-as-it-use-to.patch
Make i/dhash_entries cmdline work as it use to.
making-i-dhash_entries-cmdline-work-as-it-use-to-fix.patch
making-i-dhash_entries-cmdline-work-as-it-use-to-fix
jbd-recovery-latency-fix.patch
jbd recovery latency fix
truncate_inode_pages-latency-fix.patch
truncate_inode_pages-latency-fix
journal_clean_checkpoint_list-latency-fix.patch
journal_clean_checkpoint_list latency fix
journal_clean_checkpoint_list-latency-fix-fix.patch
journal_clean_checkpoint_list-latency-fix-fix
kjournald-smp-latency-fix.patch
kjournald-smp-latency-fix
unmap_vmas-smp-latency-fix.patch
unmap_vmas-smp-latency-fix
__cleanup_transaction-latency-fix.patch
__cleanup_transaction-latency-fix
prune_dcache-latency-fix.patch
prune_dcache-latency-fix
filemap_sync-latency-fix.patch
filemap_sync-latency-fix
slab-latency-fix.patch
slab-latency-fix
get_user_pages-latency-fix.patch
get_user_pages-latency-fix
send_IPI_mask_bitmask-build-fix.patch
send_IPI_mask_bitmask() build fix
e1000-build-fix.patch
e1000 build fix
e1000-inlining-fix.patch
e1000 inlining fix
pty_write-latency-fix.patch
pty_write-latency-fix
enable-all-events-for-initramfs.patch
Enable all events for initramfs
arch-i386-kernel-smpc-gcc341-inlining-fix.patch
arch/i386/kernel/smp.c gcc341 inlining fix
268-rc2-mm2-warning-on-numa-q.patch
warning on NUMA-Q
was-removal-of-sync-in-panic.patch
remove sync() from panic
move-cache_reap-out-of-timer-context.patch
Move cache_reap out of timer context
move-cache_reap-out-of-timer-context-fix.patch
move-cache_reap-out-of-timer-context-fix
gettimeofday-nanoseconds-patch-makes-it-possible-for-the-posix-timer.patch
gettimeofday nanoseconds patch
x86-64-singlestep-through-sigreturn-system-call-2.patch
Fix x86-64 singlestep through sigreturn system call
create-nodemask_t.patch
Create nodemask_t
some-random-nodemask-fix.patch
nodemask fix
nodemask-build-fix.patch
nodemask build fix
add-ixdp2x01-board-support-to-cs89x0-driver.patch
Add IXDP2x01 board support to CS89x0 driver
remove-dead-prototypes.patch
remove dead prototypes
s390-use-include-asm-generic-dma-mapping-brokenh.patch
s390: Use include/asm-generic/dma-mapping-broken.h
cdrom-get_last_written-fix.patch
Subject: cdrom.c get_last_written fixup
get_random_bytes-returns-the-same-on-every-boot.patch
get_random_bytes() returns the same on every boot
locking-optimization-for-cache_reap.patch
slab: locking optimization for cache_reap
b44-add-47xx-support.patch
b44: add 47xx support
signal-race-fix.patch
signal handling race fix
signal-race-fix-ia64.patch
signal-race-fix: ia64
signal-race-fix-s390.patch
signal-race fixes for s390
signal-race-fix-s390-fix.patch
s390 signal handling fixes
signal-race-fix-x86_64.patch
signal-race-fixes: x86-64 support
signal-race-fix-x86_64-fix.patch
x86_64 signal handling fix
ppc-signal-handling-fixes.patch
ppc signal handling fixes
signal-race-fixes-sparc-sparc64.patch
signal handling race fixes: sparc and sparc64
signal-race-fixes-ppc64.patch
pPC64 signal race fix patch
signal-race-fix-alpha.patch
alpha signal race fixes
process-aggregates.patch
Process Aggregates (PAGG)
process-aggregates-warning-fix.patch
process-aggregates warning fix
process-aggregates-macro-fix.patch
process-aggregates macro fix
allow-x86_64-to-reenable-interrupts-on-contention.patch
Allow x86_64 to reenable interrupts on contention
move-pit-code-to-timer_pit.patch
x86: move PIT code to timer_pit
move-pit-code-to-timer_pit-warning-fix.patch
move-pit-code-to-timer_pit-warning-fix
i2o-build_99.patch
i20 rewrite
i2o-build_99-gcc295-fixes.patch
i2o-build_99-gcc295-fixes
i2o-resync-with-post-266-changes.patch
i2o: resync with post-2.6.6 changes
i2o-resync-with-post-266-changes-2.patch
i2o: more resyncing with post-2.6.6 changes
i2o-devfs-fix.patch
i2o devfs fix
apic-output-reduction.patch
IO-APIC debug message reduction
fix-ide-probe-double-detection.patch
Fix ide probe double detection
fix-smm-failures-on-e750x-systems.patch
fix SMM failures on E750x systems
serial-cs-and-unusable-port-size-ranges.patch
serial-cs and unusable port size ranges
make-shrinker_sem-an-rwsem.patch
make shrinker_sem an rwsem
vlan-support-for-3c59x-3c90x.patch
VLAN support for 3c59x/3c90x
break-out-zone-free-list-initialization.patch
break out zone free list initialization
radeonfb-cleanup-and-little-fixes.patch
radeonfb: cleanup and little fixes
rivafb-i2c-fixes.patch
Rivafb I2C fixes
fbmon-edd-blacklist.patch
fbcom: EDD-based blacklisting
fbcon-differentiate-bits_per_pixel-from-color-depth.patch
fbcon: ifferentiate bits_per_pixel from color depth
fbcon-differentiate-bits_per_pixel-from-color-depth-fixup.patch
fbcon-differentiate-bits_per_pixel-from-color-depth-fixup
fbcon-differentiate-bits_per_pixel-from-color-depth-export.patch
fbcon-differentiate-bits_per_pixel-from-color-depth-export
fbdev-set-color-fields-correctly.patch
fbdev: set color fields correctly
fbdev-attn-maintainers-set-correct-hardware-capabilities.patch
fbdev: ATTN: Maintainers - Set correct hardware capabilities
rivafb-do-not-tap-vga-ports-if-not-x86.patch
rivafb: Do not tap VGA ports if not X86
i810fb-fixes.patch
i810fb fixes
i810fb-fixes-2.patch
i810fb fixes #2
fbdev-find-correct-logo-for-directcolor-24bpp.patch
fbdev: find correct logo for directcolor < 24bpp
rivafb-kill-riva_chip_info-and-riva_chips.patch
rivafb: kill riva_chip_info and riva_chips
drm-optimisation.patch
drm optimisation
net-smc9194c-fix-inline-compile-errors-fwd.patch
net/smc9194.c: fix gcc-3.5 inline compile errors
net-hamachic-remove-bogus-inline-at-function-prototype.patch
net/hamachi.c: gcc-3.5 build fixes
scsi-qla2xxx-fix-inline-compile-errors.patch
qla2xxx gcc-3.5 fixes
net-rrunnerc-fix-inline-compile-error.patch
net/rrunner.c: gcc-3.5 fixes
istallion-remove-inlines.patch
istallion: gcc-3.5 fixes
mxserc-fix-inlines-fwd.patch
mxser.c: gcc-3.5 fixes
radio-maestroc-remove-an-inline-fwd.patch
radio-maestro.c: gcc-3.5 fixes
net-tulip-dmfec-fix-inline-compile-errors-fwd.patch
net/tulip/dmfe.c: gcc-3.5 fixes
fix-inlining-errors-in-drivers-scsi-aic7xxx-aic79xx_osmc.patch
inlining errors in drivers/scsi/aic7xxx/aic79xx_osm.c
fix-inline-related-gcc-34-build-failures-in.patch
fix inline related gcc 3.4 build failures in drivers/net/wan/dscc4.c
igxb_main-gcc-34-build-fix.patch
ixgb_main.c: fix inline compile errors
ext2_readdir-filp-f_pos-fix.patch
ext2_readdir() filp->f_pos fix
do_general_protection-doesnt-disable-irq.patch
do_general_protection doesn't disable irq
proc_pid_cmdline-race-fix.patch
proc_pid_cmdline() race fix
support-for-exar-xr17c158-octal-uart.patch
Support for Exar XR17C158 Octal UART
x86_64-merge-2.patch
New x86-64 merge
x86_64-merge-2-build-fix.patch
x86_64-merge-2 build fix
fix-o=-compilation-on-x86-64.patch
Fix O= compilation on x86-64
ia64-swiotlb-fixes.patch
ia64: Various swiotlb fixes
ia64-swiotlb-fixes-fix.patch
ia64: more swiotlb fixes
altix-system-controller-communication-driver.patch
Altix system controller communication driver
snsc-build-fix.patch
snsc-build-fix
more-altix-system-controller-changes.patch
More Altix system controller changes
move-duplicate-bug-and-warn_on-bits-to-asm-generic.patch
move duplicate BUG and WARN_ON bits to asm-generic
move-duplicate-bug-and-warn_on-bits-to-asm-generic-fix.patch
Fix missing backslash in asm-generic/bug.h
fix-con_buf_size-usage.patch
Fix CON_BUF_SIZE usage
vprintk-support.patch
vprintk support
vprintk-for-ext2-errors.patch
vprintk for ext2 errors
vprintk-for-ext3-errors.patch
vprintk for ext3 errors
prio_tree-kill-vma_prio_tree_init.patch
prio_tree: kill vma_prio_tree_init()
prio_tree-iterator-vma_prio_tree_next-cleanup.patch
prio_tree: iterator + vma_prio_tree_next cleanup
rcu-cpu-offline-cleanup.patch
RCU - cpu-offline-cleanup
rcu-rcu-cpu-offline-fix.patch
RCU - cpu offline fix
rcu-low-latency-rcu.patch
RCU: low latency rcu
rcu-clean-up-code.patch
rcu: clean up code
rcu-fix-spaces-in-rcupdateh.patch
rcu: fix spaces in rcupdate.h
rcu-introduce-call_rcu_bh.patch
rcu: introduce call_rcu_bh()
rcu-use-call_rcu_bh-in-route-cache.patch
rcu: use call_rcu_bh() in route cache
rcu-document-rcu-api.patch
rcu: document RCU api
rcu-abstracted-rcu-dereferencing.patch
rcu: abstracted RCU dereferencing
alpha-print-the-symbol-of-pc-and-ra-during-oops.patch
alpha: print the symbol of pc and ra during Oops
first-next_cpu-returns-values-nr_cpus.patch
first/next_cpu returns values > NR_CPUS
first-next_cpu-returns-values-nr_cpus-fix.patch
first-next_cpu-returns-values-nr_cpus fix
add-support-for-it8212-ide-controllers.patch
Add support for IT8212 IDE controllers
drivers-net-wan-cycx_x25c189-warning-conflicting-types.patch
drivers/net/wan/cycx_x25.c:189: warning: conflicting types for built-in function 'log2'
watchdog-fix-warning-defined-but-not-used.patch
watchdog: fix warning "defined but not used"
i386-hotplug-cpu.patch
i386 Hotplug CPU
token-based-thrashing-control.patch
token based thrashing control
token-based-thrashing-control-remove-debug.patch
token-based-thrashing-control-remove-debug
token-based-load-control-no-swap-build-fix.patch
laod control: fix the build with CONFIG_SWAP=n
writeback-page-range-hint.patch
Writeback page range hint
fix-writeback-page-range-to-use-exact-limits.patch
Fix writeback page range to use exact limits
mpage-writepages-range-limit-fix.patch
mpage writepages range limit fix
filemap_fdatawrite-range-interface.patch
filemap_fdatawrite range interface
concurrent-o_sync-write-support.patch
Concurrent O_SYNC write support
nfsd-force-server-side-tcp-when-nfsv4-enabled.patch
nfsd: force server-side TCP when NFSv4 enabled
nfsd-nfsd-is-missing-a-put_group_info-in-the-auth_null.patch
nfsd: nfsd is missing a put_group_info in the auth_null
nfsd-make-cache_init-initialize-reference-count-to-1.patch
nfsd: make cache_init initialize reference count to 1
nfsd-simplify-auth_domain_lookup.patch
nfsd: simplify auth_domain_lookup
nfsd-fix-ip_map-cache-reference-count-leak.patch
nfsd: fix ip_map cache reference count leak.
nfsd-basic-v4-acl-definitions.patch
nfsd: basic v4 ACL definitions
nfsd-posix-nfsv4-acl-translation-for-nfsd.patch
nfsd: POSIX<->NFSv4 acl translation for nfsd
nfsd-acl-support-for-the-nfsv4-server.patch
nfsd: ACL support for the NFSv4 server
cdrom-event-notification-fixes.patch
cdrom event notification fixes
new-device-driver-to-enable-the-ibm-multiport-serial-adapter.patch
new device driver to enable the IBM Multiport Serial Adapter
iteraid.patch
ITE RAID driver
iteraid-cleanup.patch
iteraid cleanup
kill-udf-registration-unregistration-messages.patch
kill UDF registration/unregistration messages
sparc-remove-undefined-symbol.patch
sparc: remove undefined symbol
nbd-fix-struct-request-race-condition.patch
nbd: fix struct request race condition
consolidate-prof_cpu_mask.patch
consolidate prof_cpu_mask
profile_pc.patch
profile_pc()
profile_pc-fix.patch
profile_pc fix
profile_pc-fix-2.patch
profile_pc fix 2
profile_pc-fix-3.patch
profile_pc fix 3
proc_pc-alpha-fix.patch
proc_pc: alpha fix
From: William Lee Irwin III <wli@holomorphy.com>
Subject: alpha irq needs profile.h for create_prof_cpu_mask()
profile_tick.patch
profile_tick()
profile-tick-fix.patch
profile-tick-fix
early-profiling-oops-fix.patch
fix early oops with profiling
move-profile-operations.patch
move profile operations
prof_pc-proc-fixes.patch
prof_pc: fix build with CONFIG_PROC_FS=n
prof-fix-create_proc_profile.patch
profiling: fix create_proc_profile()
make-private-profile-state-static.patch
make private profile state static
make-prof_buffer-atomic_t.patch
make prof_buffer atomic_t
ipmi-watchdog-patch.patch
IPMI Watchdog handling updates
dio-bio-sizing-fix.patch
direct-io: size the BIOs more accurately
is_err-is-unlikely.patch
mark IS_ERR as unlikely()
is_err-unlikeliness-cleanup.patch
IS_ERR() unlikeliness cleanup
igxb-speedup.patch
igxb-speedup
fix-netpoll-cleanup-on-abort-without-dev.patch
Fix netpoll cleanup on abort without dev
add-missing-watchdog-compatible_ioctls.patch
add missing watchdog COMPATIBLE_IOCTLs
aioc-rename-struct-timeout-to-struct-aio_timeout.patch
aio.c: rename 'struct timeout' to 'struct aio_timeout'
fix-compiling-oldconfig-with-gcc-35.patch
fix compiling oldconfig with gcc-3.5
dont-pass-mem_map-into-init-functions.patch
don't pass mem_map into init functions
dont-pass-mem_map-into-init-functions-ia64-fix.patch
don't pass mem_map into init functions: ia64 fix
dont-pass-mem_map-into-init-functions-arches.patch
don't pass mem_map into init functions: other architectures
dont-pass-mem_map-into-init-functions-ia64-fix-2.patch
dont-pass-mem_map-into-init-functions-ia64-fix-2
dont-pass-mem_map-into-init-functions-x86_64-fix.patch
dont-pass-mem_map-into-init-functions x86_64 fix
dont-pass-mem_map-into-init-functions-x86-fix.patch
dont-pass-mem_map-into-init-functions x86 fix
dont-pass-mem_map-into-init-functions-even-more-fixes.patch
dont-pass-mem_map-into-init-functions more fixes
might-sleep-in-atomic-while-dumping-elf.patch
fix might-sleep-in-atomic while dumping elf
awe_wave-oss-too-much-__exit.patch
awe_wave (OSS): too much __exit
serialize-access-to-ide-devices.patch
serialize access to ide devices
mark-loop_change_fd-as-an-ulong-compat-ioctl.patch
mark LOOP_CHANGE_FD as an ULONG compat ioctl
readahead-simplification.patch
readahead: simplify recent fixes
mlock-as-user-for-268-rc2-mm2.patch
rlimit-based mlocks for unprivileged users
mlock-as-user-fixes.patch
mlock-as-user fixes
increase-mlock-limit-to-32k.patch
increase per-user mlock limit default to 32k
increase-mlock-limit-to-32k-cleanup.patch
increase mlock limit to 32k cleanup
idt77252c-add-missing-pci_enable_device.patch
idt77252.c: add missing pci_enable_device()
ip2mainc-add-missing-pci_enable_device.patch
ip2main.c: add missing pci_enable_device()
tpam_mainc-add-missing-pci_enable_device.patch
tpam_main.c: add missing pci_enable_device()
ibmasm-add-missing-pci_enable_device.patch
ibmasm: add missing pci_enable_device()
hp100c-add-missing-pci_enable_device.patch
hp100.c: add missing pci_enable_device()
ioc3-ethc-add-missing-pci_enable_device.patch
ioc3-eth.c: add missing pci_enable_device()
de4x5c-add-missing-pci_enable_device.patch
de4x5.c: add missing pci_enable_device()
cpqfc-add-missing-pci_enable_device.patch
cpqfc: add missing pci_enable_device()
remove-unconditional-pci-acpi-irq-routing.patch
remove unconditional PCI ACPI IRQ routing
add-pci_fixup_enable-pass.patch
pci: add pci_fixup_enable pass
fix-gcc-35-compile-issue-in-mm-mempolicyc.patch
Fix gcc 3.5 compile issue in mm/mempolicy.c
eata_pio-warning-fix.patch
eata_pio.c warning fix
via-agpc-resume-suspend-support.patch
via-agp.c resume/suspend support
disable-atykb-warning.patch
disable atykb "too many keys pressed" warning
collected-aio-retry-fixes-and-enhancements.patch
AIO: retry infrastructure fixes and enhancements
collected-aio-retry-fixes-and-enhancements-cleanup.patch
collected-aio-retry-fixes-and-enhancements-cleanup
aio-splice-runlist-for-fairness-across-io-contexts.patch
AIO: Splice runlist for fairness across io contexts
aio-workqueue-context-switch-reduction.patch
AIO: workqueue context switch reduction
x86_64-numa-emulation.patch
x86_64: emulate NUMA on non-NUMA hardware
make-max_init_args-25.patch
Make MAX_INIT_ARGS 32
wireless-extension-v17-for-linus.patch
Wireless Extension v17 for Linus
wireless-drivers-update-for-we-17.patch
Wireless drivers update for WE-17
request_region-for-winbond-and-smsc-parport-drivers.patch
request_region for winbond and smsc parport drivers
add-bus-dependencies-to-two-scsi-drivers.patch
Add bus dependencies to two scsi drivers
knfsd-server-permissions-fix.patch
knfsd: fix server permission handling
make-md-no-device-warning-kern_warning.patch
md: make MD no device warning KERN_WARNING
ia64-dma_mapping-fix.patch
ia64: dma_mapping fix
automatically-enable-bigsmp-on-big-hp-machines.patch
Automatically enable bigsmp on big HP machines
rss-ulimit-enforcement.patch
RSS ulimit enforcement
fix-proc-pid-statm-documentation.patch
Fix /proc/pid/statm documentation
cciss-update-fixes-to-32-64-bit-conversions.patch
cciss: fixes to 32/64-bit conversions
cciss-updates-zero-out-buffer-in-passthru-ioctls-for-hp.patch
cciss: zero out buffer in passthru ioctls for HP utilities
cciss-updates-proc-fixes-for-268-rc3.patch
cciss: /proc fixes
cciss-updates-cylinder-calculation-fix-for-268-rc3.patch
cciss: cylinder calculation fix
cciss-updates-id-change-for-v100-controller-for-268-rc3.patch
cciss: id change for V100 controller
cciss-updates-pdev-intr-fix-for-268-rc3.patch
cciss: pdev->intr fix
cciss-update-7-read_ahead-bumped-to-1024.patch
cciss: read_ahead bumped to 1024
cciss-update-8-maintainers-update-for-hp.patch
cciss update 8 maintainers update for HP
cciss-congig-dependency-fix.patch
cciss /proc dependency fix
rmaplock-1-5-pageanon-in-mapping.patch
rmaplock: PageAnon in mapping
rmaplock-2-5-kill-page_map_lock.patch
rmaplock: kill page_map_lock
rmaplock-3-5-slab_destroy_by_rcu.patch
rmaplock: SLAB_DESTROY_BY_RCU
rmaplock-4-5-mm-lock-ordering.patch
rmaplock: mm lock ordering
rmaplock-5-5-swapoff-use-anon_vma.patch
rmaplock: swapoff use anon_vma
x86-bitopsh-commentary-on-instruction-reordering.patch
x86 bitops.h commentary on instruction reordering
clarify-get_task_mm-mmgrab.patch
clarify get_task_mm (mmgrab)
simple-fs-stop-ve-dentries.patch
simple fs stop -ve dentries
8139too-rx-fifo-overflow-recovery.patch
8139too: Rx fifo/overflow recovery
8139too-be-sure-to-progress-durin-rtl8139_rx.patch
8139too: be sure to progress durin rtl8139_rx()
via-velocity-more-inetaddr_notifier-fix.patch
via-velocity: more inetaddr_notifier fix
vm-tune-writeback.patch
vm: writeout watermark tuning
alloc-pages-watermark-fixes.patch
vm: alloc_pages watermark fixes
alloc-pages-priority-tuning.patch
alloc_pages priority tuning
fix-d_path-errors.patch
Correctly handle d_path error returns
emu10k1-maintainer-update.patch
emu10k1 maintainer update
ptr_ok-cleanup.patch
x86: remove hard-coded numbers from ptr_ok()
mpage_readpage-unable-to-handle-bigger-requests.patch
Fix mpage_readpage() for big requests
mpage_readpage-unable-to-handle-bigger-requests-warning-fix.patch
mpage_readpage-unable-to-handle-bigger-requests warning fix
improve-speed-of-freeing-bootmem.patch
improve speed of freeing bootmem
implement-in-kernel-keys-keyring-management.patch
implement in-kernel keys & keyring management
implement-in-kernel-keys-keyring-management-afs-workaround.patch
implement-in-kernel-keys-keyring-management afs workaround
consolidate-clone_idletask-masking.patch
sched: consolidate CLONE_IDLETASK masking
kill-clone_idletask.patch
kill CLONE_IDLETASK
oprofile-xscale-fixes-for-pxa270-xscale2.patch
OProfile/XScale fixes for PXA270/XScale2
remove-magic-1-from-shm-segment-count.patch
remove magic +1 from shm segment count
268-rc3-jffs2-unable-to-read-filesystems.patch
jffs2 unable to read filesystems
via-rhine-suspend-resume-support.patch
via-rhine: suspend/resume support
via-rhine-de-isolate-phy.patch
via-rhine: de-isolate PHY
via-rhine-small-fixes.patch
via-rhine: small fixes
fix-i386-x86_64-idle-routine-selection.patch
fix i386/x86_64 idle routine selection
video-mode-handling-linked-list-of-video-modes.patch
Video Mode Handling - Linked list of video modes
video-mode-handling-linked-list-of-video-modes-build-fix.patch
video-mode-handling-linked-list-of-video-modes-build-fix
video-mode-handling-save-per-display-graphics-display-settings.patch
Video Mode Handling - Save per-display graphics/display settings
video-mode-handling-delete-entries-from-mode-list.patch
Video Mode Handling - Delete entries from mode list
video-mode-handling-reduce-memory-footprint-of-fbdev.patch
Video Mode Handling - Reduce memory footprint of fbdev
cdrom-mo-drive-open-write-fix.patch
cdrom: MO-drive open write fix
x86-pae-swapspace-expansion.patch
x86 PAE swapspace expansion
executable-hugetlb-pages.patch
hugetlb: permit executable mappings
knfsd-fix-brokenness-with-fsid=-export-option.patch
kNFSd: fix brokenness with fsid= export option
md-fix-problems-with-checksum-handling-in-md-superblocks.patch
md: fix problems with checksum handling in MD superblocks.
sk98lin-no-procfs-build-fix.patch
sk98lin/skge.c doesn't compile with PROC_FS=n
fix-net-hamradio-dmascc-with-gcc-34-fwd.patch
fix net/hamradio/dmascc with gcc 3.4
fix-warnings-in-es7000.patch
Fix warnings in es7000
reduce-aacraid-namespace-pollution.patch
reduce aacraid namespace polution
reduce-bkl-usage-in-do_coredump.patch
Reduce bkl usage in do_coredump
ide-do-spin-up-for-all-platforms.patch
IDE: do spin up for all platforms
apm_infodisabled-fix.patch
apm_info.disabled fix
267-rc3-mm2-inlining-failures.patch
fix inlining failures
qlogic-isp2x00-remove-needless-busyloop.patch
QLogic ISP2x00: remove needless busyloop
high2lowuid-warning-fix.patch
hige2lowuid warning fixes
new-cpu_has_-flags.patch
New cpu_has_ flags
qla2xxx-allocation-mode-fix.patch
qla2xxx allocation mode fix
scsi-gdth-kill-define-__devinitdata.patch
SCSI gdth: kill #define __devinitdata
get_nodes-mask-miscalculation.patch
Fix get_nodes() mask miscalculation
remove-spaces-from-pci-ide-pci_drivername-field.patch
Remove spaces from PCI IDE pci_driver.name field
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.8-rc4-mm1
2004-08-10 7:21 2.6.8-rc4-mm1 Andrew Morton
@ 2004-08-10 16:37 ` Jesse Barnes
2004-08-10 21:20 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-11 0:12 ` 2.6.8-rc4-mm1 Tom Vier
1 sibling, 1 reply; 21+ messages in thread
From: Jesse Barnes @ 2004-08-10 16:37 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 380 bytes --]
On Tuesday, August 10, 2004 12:21 am, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc4/2.6
>.8-rc4-mm1/
Needs a build fix for ia64, which is attached. acpi_noirq wasn't defined for
anything but i386, afaict.
Once I fix the build, it hangs in the same way as 2.6.8-rc3-mm2. I assume wli
is still working on fixing that...
Jesse
[-- Attachment #2: ia64-acpi-build-fix.patch --]
[-- Type: text/plain, Size: 702 bytes --]
diff -Napur -X /home/jbarnes/dontdiff linux-2.6.8-rc4.orig/include/asm-ia64/acpi.h linux-2.6.8-rc4/include/asm-ia64/acpi.h
--- linux-2.6.8-rc4.orig/include/asm-ia64/acpi.h 2004-08-10 09:01:34.000000000 -0700
+++ linux-2.6.8-rc4/include/asm-ia64/acpi.h 2004-08-10 09:26:39.000000000 -0700
@@ -89,6 +89,7 @@ ia64_acpi_release_global_lock (unsigned
((Acq) = ia64_acpi_release_global_lock((unsigned int *) GLptr))
#define acpi_disabled 0 /* ACPI always enabled on IA64 */
+#define acpi_noirq 0 /* ACPI always enabled on IA64 */
#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */
static inline void disable_acpi(void) { }
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: 2.6.8-rc4-mm1
2004-08-10 16:37 ` 2.6.8-rc4-mm1 Jesse Barnes
@ 2004-08-10 21:20 ` William Lee Irwin III
2004-08-10 22:39 ` 2.6.8-rc4-mm1 Robert Picco
0 siblings, 1 reply; 21+ messages in thread
From: William Lee Irwin III @ 2004-08-10 21:20 UTC (permalink / raw)
To: Jesse Barnes; +Cc: Andrew Morton, linux-kernel
On Tuesday, August 10, 2004 12:21 am, Andrew Morton wrote:
>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc4/2.6
>>.8-rc4-mm1/
On Tue, Aug 10, 2004 at 09:37:47AM -0700, Jesse Barnes wrote:
> Needs a build fix for ia64, which is attached. acpi_noirq wasn't defined for
> anything but i386, afaict.
> Once I fix the build, it hangs in the same way as 2.6.8-rc3-mm2. I
> assume wli is still working on fixing that...
> Jesse
Yes. Not quite there yet. I have it down to one printk() and "why does
the printk fix anything?"
-- wli
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.8-rc4-mm1
2004-08-10 21:20 ` 2.6.8-rc4-mm1 William Lee Irwin III
@ 2004-08-10 22:39 ` Robert Picco
2004-08-10 22:28 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-10 23:15 ` 2.6.8-rc4-mm1 William Lee Irwin III
0 siblings, 2 replies; 21+ messages in thread
From: Robert Picco @ 2004-08-10 22:39 UTC (permalink / raw)
To: William Lee Irwin III; +Cc: Jesse Barnes, Andrew Morton, linux-kernel
copy_thread expects a switch_stack below pt_regs on the stack. the
switch_stack would have the parent's bspstore value for computing how
much register backing store to copy into child. there isn't a
switch_stack and the resultant bspstore size computed is enormous
(depends on what there is on stack). i suspect printk has changed stack
and the code layout changed too.
diff -ruN -X /home/picco/losl/dontdiff linux-2.6.8-rc3-mm2-orig/arch/ia64/kernel/process.c linux-2.6.8-rc3-mm2/arch/ia64/kernel/process.c
--- linux-2.6.8-rc3-mm2-orig/arch/ia64/kernel/process.c 2004-08-10 17:24:51.000000000 -0400
+++ linux-2.6.8-rc3-mm2/arch/ia64/kernel/process.c 2004-08-10 17:33:51.000000000 -0400
@@ -352,7 +352,7 @@
* For SMP idle threads, fork_by_hand() calls do_fork with
* NULL regs.
*/
- if (!regs)
+ if (clone_flags & CLONE_IDLETASK)
return 0;
#endif
diff -ruN -X /home/picco/losl/dontdiff linux-2.6.8-rc3-mm2-orig/include/linux/sched.h linux-2.6.8-rc3-mm2/include/linux/sched.h
--- linux-2.6.8-rc3-mm2-orig/include/linux/sched.h 2004-08-10 17:25:07.000000000 -0400
+++ linux-2.6.8-rc3-mm2/include/linux/sched.h 2004-08-10 17:31:56.000000000 -0400
@@ -40,6 +40,7 @@
#define CLONE_FS 0x00000200 /* set if fs info shared between processes */
#define CLONE_FILES 0x00000400 /* set if open files shared between processes */
#define CLONE_SIGHAND 0x00000800 /* set if signal handlers and blocked signals shared */
+#define CLONE_IDLETASK 0x00001000 /* set if new pid should be 0 (kernel only)*/
#define CLONE_PTRACE 0x00002000 /* set if we want to let tracing continue on the child too */
#define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */
#define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */
diff -ruN -X /home/picco/losl/dontdiff linux-2.6.8-rc3-mm2-orig/kernel/fork.c linux-2.6.8-rc3-mm2/kernel/fork.c
--- linux-2.6.8-rc3-mm2-orig/kernel/fork.c 2004-08-10 17:25:10.000000000 -0400
+++ linux-2.6.8-rc3-mm2/kernel/fork.c 2004-08-10 17:32:56.000000000 -0400
@@ -1196,7 +1196,7 @@
struct pt_regs regs;
memset(®s, 0, sizeof(struct pt_regs));
- task = copy_process(CLONE_VM, 0, ®s, 0, NULL, NULL, 0);
+ task = copy_process(CLONE_VM|CLONE_IDLETASK, 0, ®s, 0, NULL, NULL, 0);
if (!task)
return ERR_PTR(-ENOMEM);
init_idle(task, cpu);
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.8-rc4-mm1
2004-08-10 22:39 ` 2.6.8-rc4-mm1 Robert Picco
@ 2004-08-10 22:28 ` William Lee Irwin III
2004-08-10 22:30 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-10 23:15 ` 2.6.8-rc4-mm1 William Lee Irwin III
1 sibling, 1 reply; 21+ messages in thread
From: William Lee Irwin III @ 2004-08-10 22:28 UTC (permalink / raw)
To: Robert Picco; +Cc: Jesse Barnes, Andrew Morton, linux-kernel
On Tue, Aug 10, 2004 at 06:39:33PM -0400, Robert Picco wrote:
> copy_thread expects a switch_stack below pt_regs on the stack. the
> switch_stack would have the parent's bspstore value for computing how
> much register backing store to copy into child. there isn't a
> switch_stack and the resultant bspstore size computed is enormous
> (depends on what there is on stack). i suspect printk has changed stack
> and the code layout changed too.
Please, let's do this instead:
Index: mm1-2.6.8-rc4/arch/ia64/kernel/smpboot.c
===================================================================
--- mm1-2.6.8-rc4.orig/arch/ia64/kernel/smpboot.c 2004-08-10 15:21:56.215915699 -0700
+++ mm1-2.6.8-rc4/arch/ia64/kernel/smpboot.c 2004-08-10 15:22:39.504001106 -0700
@@ -367,7 +367,7 @@
{
struct create_idle *c_idle = _c_idle;
- c_idle->idle = fork_idle(c_idle->cpu);
+ c_idle->idle = __fork_idle(c_idle->cpu, NULL);
complete(&c_idle->done);
}
Index: mm1-2.6.8-rc4/include/linux/sched.h
===================================================================
--- mm1-2.6.8-rc4.orig/include/linux/sched.h 2004-08-10 15:21:56.215915699 -0700
+++ mm1-2.6.8-rc4/include/linux/sched.h 2004-08-10 15:26:26.673920198 -0700
@@ -831,7 +831,8 @@
extern int do_execve(char *, char __user * __user *, char __user * __user *, struct pt_regs *);
extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *);
-task_t *fork_idle(int);
+task_t *__fork_idle(int, struct pt_regs *);
+task_t *fork_idle(intcpu);
extern void set_task_comm(struct task_struct *tsk, char *from);
extern void get_task_comm(char *to, struct task_struct *tsk);
Index: mm1-2.6.8-rc4/kernel/fork.c
===================================================================
--- mm1-2.6.8-rc4.orig/kernel/fork.c 2004-08-10 15:21:56.200290699 -0700
+++ mm1-2.6.8-rc4/kernel/fork.c 2004-08-10 15:26:59.940521353 -0700
@@ -1192,11 +1192,15 @@
task_t * __init fork_idle(int cpu)
{
- task_t *task;
struct pt_regs regs;
memset(®s, 0, sizeof(struct pt_regs));
- task = copy_process(CLONE_VM, 0, ®s, 0, NULL, NULL, 0);
+ return __fork_idle(cpu, ®s);
+}
+
+task_t * __init __fork_idle(int cpu, struct pt_regs *regs)
+{
+ task_t *task = copy_process(CLONE_VM, 0, regs, 0, NULL, NULL, 0);
if (!task)
return ERR_PTR(-ENOMEM);
init_idle(task, cpu);
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: 2.6.8-rc4-mm1
2004-08-10 22:28 ` 2.6.8-rc4-mm1 William Lee Irwin III
@ 2004-08-10 22:30 ` William Lee Irwin III
2004-08-10 22:43 ` 2.6.8-rc4-mm1 William Lee Irwin III
0 siblings, 1 reply; 21+ messages in thread
From: William Lee Irwin III @ 2004-08-10 22:30 UTC (permalink / raw)
To: Robert Picco, Jesse Barnes, Andrew Morton, linux-kernel
On Tue, Aug 10, 2004 at 03:28:40PM -0700, William Lee Irwin III wrote:
> Please, let's do this instead:
Index: mm1-2.6.8-rc4/arch/ia64/kernel/smpboot.c
===================================================================
--- mm1-2.6.8-rc4.orig/arch/ia64/kernel/smpboot.c 2004-08-10 15:21:56.215915699 -0700
+++ mm1-2.6.8-rc4/arch/ia64/kernel/smpboot.c 2004-08-10 15:22:39.504001106 -0700
@@ -367,7 +367,7 @@
{
struct create_idle *c_idle = _c_idle;
- c_idle->idle = fork_idle(c_idle->cpu);
+ c_idle->idle = __fork_idle(c_idle->cpu, NULL);
complete(&c_idle->done);
}
Index: mm1-2.6.8-rc4/include/linux/sched.h
===================================================================
--- mm1-2.6.8-rc4.orig/include/linux/sched.h 2004-08-10 15:21:56.215915699 -0700
+++ mm1-2.6.8-rc4/include/linux/sched.h 2004-08-10 15:29:30.376066386 -0700
@@ -831,6 +831,7 @@
extern int do_execve(char *, char __user * __user *, char __user * __user *, struct pt_regs *);
extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *);
+task_t *__fork_idle(int, struct pt_regs *);
task_t *fork_idle(int);
extern void set_task_comm(struct task_struct *tsk, char *from);
Index: mm1-2.6.8-rc4/kernel/fork.c
===================================================================
--- mm1-2.6.8-rc4.orig/kernel/fork.c 2004-08-10 15:21:56.200290699 -0700
+++ mm1-2.6.8-rc4/kernel/fork.c 2004-08-10 15:26:59.940521353 -0700
@@ -1192,11 +1192,15 @@
task_t * __init fork_idle(int cpu)
{
- task_t *task;
struct pt_regs regs;
memset(®s, 0, sizeof(struct pt_regs));
- task = copy_process(CLONE_VM, 0, ®s, 0, NULL, NULL, 0);
+ return __fork_idle(cpu, ®s);
+}
+
+task_t * __init __fork_idle(int cpu, struct pt_regs *regs)
+{
+ task_t *task = copy_process(CLONE_VM, 0, regs, 0, NULL, NULL, 0);
if (!task)
return ERR_PTR(-ENOMEM);
init_idle(task, cpu);
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: 2.6.8-rc4-mm1
2004-08-10 22:30 ` 2.6.8-rc4-mm1 William Lee Irwin III
@ 2004-08-10 22:43 ` William Lee Irwin III
2004-08-10 22:45 ` 2.6.8-rc4-mm1 William Lee Irwin III
0 siblings, 1 reply; 21+ messages in thread
From: William Lee Irwin III @ 2004-08-10 22:43 UTC (permalink / raw)
To: Robert Picco, Jesse Barnes, Andrew Morton, linux-kernel
On Tue, Aug 10, 2004 at 03:28:40PM -0700, William Lee Irwin III wrote:
>> Please, let's do this instead:
On Tue, Aug 10, 2004 at 03:30:06PM -0700, William Lee Irwin III wrote:
> +task_t * __init __fork_idle(int cpu, struct pt_regs *regs)
> +{
> + task_t *task = copy_process(CLONE_VM, 0, regs, 0, NULL, NULL, 0);
> if (!task)
> return ERR_PTR(-ENOMEM);
> init_idle(task, cpu);
This still doesn't eliminate the branch in ia64's copy_thread().
The best solution possible would be to redo the whole affair as an
ia64-specific cleanup pass, and to find some initial setting of regs
that works for all architectures (it seems memset(®s, 0, ...) doesn't).
-- wli
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: 2.6.8-rc4-mm1
2004-08-10 22:43 ` 2.6.8-rc4-mm1 William Lee Irwin III
@ 2004-08-10 22:45 ` William Lee Irwin III
2004-08-10 23:03 ` 2.6.8-rc4-mm1 William Lee Irwin III
0 siblings, 1 reply; 21+ messages in thread
From: William Lee Irwin III @ 2004-08-10 22:45 UTC (permalink / raw)
To: Robert Picco, Jesse Barnes, Andrew Morton, linux-kernel
On Tue, Aug 10, 2004 at 03:30:06PM -0700, William Lee Irwin III wrote:
>> +task_t * __init __fork_idle(int cpu, struct pt_regs *regs)
>> +{
>> + task_t *task = copy_process(CLONE_VM, 0, regs, 0, NULL, NULL, 0);
>> if (!task)
>> return ERR_PTR(-ENOMEM);
>> init_idle(task, cpu);
On Tue, Aug 10, 2004 at 03:43:08PM -0700, William Lee Irwin III wrote:
> This still doesn't eliminate the branch in ia64's copy_thread().
> The best solution possible would be to redo the whole affair as an
> ia64-specific cleanup pass, and to find some initial setting of regs
> that works for all architectures (it seems memset(®s, 0, ...) doesn't).
"whole affair" == NULL check in copy_thread(). Except this is a nop, so
I think we're just looking for something that survives copy_thread().
-- wli
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: 2.6.8-rc4-mm1
2004-08-10 22:45 ` 2.6.8-rc4-mm1 William Lee Irwin III
@ 2004-08-10 23:03 ` William Lee Irwin III
2004-08-10 23:38 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-11 2:01 ` 2.6.8-rc4-mm1 Jesse Barnes
0 siblings, 2 replies; 21+ messages in thread
From: William Lee Irwin III @ 2004-08-10 23:03 UTC (permalink / raw)
To: Robert Picco, Jesse Barnes, Andrew Morton, linux-kernel
On Tue, Aug 10, 2004 at 03:43:08PM -0700, William Lee Irwin III wrote:
>> This still doesn't eliminate the branch in ia64's copy_thread().
>> The best solution possible would be to redo the whole affair as an
>> ia64-specific cleanup pass, and to find some initial setting of regs
>> that works for all architectures (it seems memset(®s, 0, ...) doesn't).
On Tue, Aug 10, 2004 at 03:45:32PM -0700, William Lee Irwin III wrote:
> "whole affair" == NULL check in copy_thread(). Except this is a nop, so
> I think we're just looking for something that survives copy_thread().
I have an even better fix:
Index: mm1-2.6.8-rc4/arch/ia64/kernel/smpboot.c
===================================================================
--- mm1-2.6.8-rc4.orig/arch/ia64/kernel/smpboot.c 2004-08-10 15:32:08.000000000 -0700
+++ mm1-2.6.8-rc4/arch/ia64/kernel/smpboot.c 2004-08-10 15:55:28.902437225 -0700
@@ -356,6 +356,11 @@
return cpu_idle();
}
+struct pt_regs * __init idle_regs(struct pt_regs *regs)
+{
+ return NULL;
+}
+
struct create_idle {
struct task_struct *idle;
struct completion done;
Index: mm1-2.6.8-rc4/kernel/fork.c
===================================================================
--- mm1-2.6.8-rc4.orig/kernel/fork.c 2004-08-10 15:32:08.000000000 -0700
+++ mm1-2.6.8-rc4/kernel/fork.c 2004-08-10 16:01:24.383878183 -0700
@@ -1190,13 +1190,18 @@
goto fork_out;
}
+struct pt_regs * __init __attribute__((weak)) idle_regs(struct pt_regs *regs)
+{
+ memset(regs, 0, sizeof(struct pt_regs));
+ return regs;
+}
+
task_t * __init fork_idle(int cpu)
{
task_t *task;
struct pt_regs regs;
- memset(®s, 0, sizeof(struct pt_regs));
- task = copy_process(CLONE_VM, 0, ®s, 0, NULL, NULL, 0);
+ task = copy_process(CLONE_VM, 0, idle_regs(®s), 0, NULL, NULL, 0);
if (!task)
return ERR_PTR(-ENOMEM);
init_idle(task, cpu);
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: 2.6.8-rc4-mm1
2004-08-10 23:03 ` 2.6.8-rc4-mm1 William Lee Irwin III
@ 2004-08-10 23:38 ` William Lee Irwin III
2004-08-11 2:01 ` 2.6.8-rc4-mm1 Jesse Barnes
1 sibling, 0 replies; 21+ messages in thread
From: William Lee Irwin III @ 2004-08-10 23:38 UTC (permalink / raw)
To: Robert Picco, Jesse Barnes, Andrew Morton, linux-kernel
On Tue, Aug 10, 2004 at 03:45:32PM -0700, William Lee Irwin III wrote:
>> "whole affair" == NULL check in copy_thread(). Except this is a nop, so
>> I think we're just looking for something that survives copy_thread().
On Tue, Aug 10, 2004 at 04:03:57PM -0700, William Lee Irwin III wrote:
> I have an even better fix:
> +struct pt_regs * __init idle_regs(struct pt_regs *regs)
> +{
> + return NULL;
> +}
Okay, this boots and runs here. I suspect if a non-NULL value of
pt_regs can be found that properly initializes things so copy_thread()
doesn't die and/or set up something that crashes on the AP, it can be
plugged in here transparently, the NULL check in copy_thread() removed,
and no core changes will be needed.
If you can advise on how to set up the switch_stack/bspstore/etc. to
this effect so it can be done right away, I'd be much obliged.
-- wli
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: 2.6.8-rc4-mm1
2004-08-10 23:03 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-10 23:38 ` 2.6.8-rc4-mm1 William Lee Irwin III
@ 2004-08-11 2:01 ` Jesse Barnes
1 sibling, 0 replies; 21+ messages in thread
From: Jesse Barnes @ 2004-08-11 2:01 UTC (permalink / raw)
To: William Lee Irwin III; +Cc: Robert Picco, Andrew Morton, linux-kernel
On Tuesday, August 10, 2004 4:03 pm, William Lee Irwin III wrote:
> I have an even better fix:
Confirmed that this works on my machine too. Kudos Bob & Bill!
Thanks,
Jesse
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.8-rc4-mm1
2004-08-10 22:39 ` 2.6.8-rc4-mm1 Robert Picco
2004-08-10 22:28 ` 2.6.8-rc4-mm1 William Lee Irwin III
@ 2004-08-10 23:15 ` William Lee Irwin III
1 sibling, 0 replies; 21+ messages in thread
From: William Lee Irwin III @ 2004-08-10 23:15 UTC (permalink / raw)
To: Robert Picco; +Cc: Jesse Barnes, Andrew Morton, linux-kernel
On Tue, Aug 10, 2004 at 06:39:33PM -0400, Robert Picco wrote:
> copy_thread expects a switch_stack below pt_regs on the stack. the
> switch_stack would have the parent's bspstore value for computing how
> much register backing store to copy into child. there isn't a
> switch_stack and the resultant bspstore size computed is enormous
> (depends on what there is on stack). i suspect printk has changed stack
> and the code layout changed too.
[...]
> * For SMP idle threads, fork_by_hand() calls do_fork with
> * NULL regs.
> */
> - if (!regs)
> + if (clone_flags & CLONE_IDLETASK)
> return 0;
> #endif
It may not be immediately obvious, but since all the checks for
CLONE_IDLETASK were ripped out in patches prior to this, respecting
CLONE_IDLETASK anywhere means that userspace can create idle threads(!).
So the alternative fixes I've been posting are very necessary.
-- wli
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.8-rc4-mm1
2004-08-10 7:21 2.6.8-rc4-mm1 Andrew Morton
2004-08-10 16:37 ` 2.6.8-rc4-mm1 Jesse Barnes
@ 2004-08-11 0:12 ` Tom Vier
1 sibling, 0 replies; 21+ messages in thread
From: Tom Vier @ 2004-08-11 0:12 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
drivers/i2c/busses/i2c-keywest.c: In function `__check_probe':
drivers/i2c/busses/i2c-keywest.c:94: error: `probe' undeclared (first use in this function)
drivers/i2c/busses/i2c-keywest.c:94: error: (Each undeclared identifier is reported only once
drivers/i2c/busses/i2c-keywest.c:94: error: for each function it appears in.)
drivers/i2c/busses/i2c-keywest.c: At top level:
drivers/i2c/busses/i2c-keywest.c:94: error: `probe' undeclared here (not in a function)
drivers/i2c/busses/i2c-keywest.c:94: error: initializer element is not constant
drivers/i2c/busses/i2c-keywest.c:94: error: (near initialization for `__param_probe.arg')
drivers/i2c/busses/i2c-keywest.c:96: error: `probe' used prior to declaration
make[3]: *** [drivers/i2c/busses/i2c-keywest.o] Error 1
make[2]: *** [drivers/i2c/busses] Error 2
make[1]: *** [drivers/i2c] Error 2
make: *** [drivers] Error 2
--
Tom Vier <tmv@comcast.net>
DSA Key ID 0x15741ECE
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2004-08-13 8:16 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-08-11 3:33 2.6.8-rc4-mm1 Diffie
2004-08-11 15:36 ` 2.6.8-rc4-mm1 Randy.Dunlap
2004-08-11 22:57 ` 2.6.8-rc4-mm1 Bjorn Helgaas
2004-08-12 5:48 ` 2.6.8-rc4-mm1 Paul Blazejowski
-- strict thread matches above, loose matches on Subject: below --
2004-08-12 18:49 2.6.8-rc4-mm1 Paul Blazejowski
2004-08-12 23:21 ` 2.6.8-rc4-mm1 Bjorn Helgaas
2004-08-13 8:15 ` 2.6.8-rc4-mm1 Paul Blazejowski
2004-08-10 18:38 2.6.8-rc4-mm1 Diffie
2004-08-10 7:21 2.6.8-rc4-mm1 Andrew Morton
2004-08-10 16:37 ` 2.6.8-rc4-mm1 Jesse Barnes
2004-08-10 21:20 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-10 22:39 ` 2.6.8-rc4-mm1 Robert Picco
2004-08-10 22:28 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-10 22:30 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-10 22:43 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-10 22:45 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-10 23:03 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-10 23:38 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-11 2:01 ` 2.6.8-rc4-mm1 Jesse Barnes
2004-08-10 23:15 ` 2.6.8-rc4-mm1 William Lee Irwin III
2004-08-11 0:12 ` 2.6.8-rc4-mm1 Tom Vier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox