From: Paul Blazejowski <diffie@gmail.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: Re: PATCH: 2.6.10 - IT8212 IDE
Date: Wed, 29 Dec 2004 00:26:36 -0500 [thread overview]
Message-ID: <9dda349204122821262f71e375@mail.gmail.com> (raw)
Alan,
This patch works here but the performance is very poor. When i set DMA
and 32bit I/O thru hdparm, performance is comparable to the ITE pseudo
SCSI driver.
I get some errors on dmesg when using hdparm:
IT8212: IDE controller at PCI slot 0000:01:0c.0
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 17 (level, high) -> IRQ 17
IT8212: chipset revision 16
IT8212: 100% native mode on irq 17
ide2: BM-DMA at 0x9800-0x9807, BIOS settings: hde:DMA, hdf:pio
it8212: controller in smart mode.
ide3: BM-DMA at 0x9808-0x980f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: Integrated Technology Express Inc, ATA DISK drive
hde: IT8212 RAID 0 volume(64K stripe).
ide2 at 0x8810-0x8817,0x8c02 on irq 17
Probing IDE interface ide3...
Probing IDE interface ide3...
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hde: max request size: 128KiB
hde: 468883200 sectors (240068 MB), CHS=29186/255/63
hde: cache flushes not supported
hde: hde1
XFS mounting filesystem hde1
Ending clean XFS mount for filesystem: hde1
hde: task_in_intr: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide2: reset: master: error (0x00?)
hdparm
/dev/hde:
Timing cached reads: 2012 MB in 2.00 seconds = 1005.65 MB/sec
Timing buffered disk reads: 6 MB in 3.32 seconds = 1.81 MB/sec
hdparm -c1 -d1 -k1
/dev/hde:
setting 32-bit IO_support flag to 1
setting using_dma to 1 (on)
setting keep_settings to 1 (on)
IO_support = 1 (32-bit)
using_dma = 1 (on)
keepsettings = 1 (on)
/dev/hde:
Timing cached reads: 2028 MB in 2.00 seconds = 1013.14 MB/sec
Timing buffered disk reads: 150 MB in 3.01 seconds = 49.84 MB/sec
Regards,
Paul B.
--
FreeBSD the Power to Serve!
next reply other threads:[~2004-12-29 5:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-29 5:26 Paul Blazejowski [this message]
2004-12-29 14:33 ` PATCH: 2.6.10 - IT8212 IDE Alan Cox
-- strict thread matches above, loose matches on Subject: below --
2004-12-28 15:16 Alan Cox
2004-12-29 5:44 ` Andre Hedrick
2004-12-29 17:29 ` Bartlomiej Zolnierkiewicz
2004-12-29 20:12 ` Alan Cox
2004-12-29 21:32 ` Bartlomiej Zolnierkiewicz
2004-12-29 21:24 ` Alan Cox
2004-12-29 22:38 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9dda349204122821262f71e375@mail.gmail.com \
--to=diffie@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox