Re: [PATCH v3 1/2] platform: x86-android-tablets: lenovo: Add Yoga Book haptics entries

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

On Thu, 11 Jun 2026, Yauhen Kharuzhy wrote:

> Add drv2604l i2c_board_info for drv2604l haptics drivers present in
> Lenovo Yoga Book YB1-X90 and YB1-X91. Set properties required for device
> initialization and self-calibration.
> 
> Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
> ---
>  drivers/platform/x86/x86-android-tablets/lenovo.c | 94 +++++++++++++++++++++++
>  1 file changed, 94 insertions(+)
> 
> diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c
> index 8d825e0b4661..81453217fec5 100644
> --- a/drivers/platform/x86/x86-android-tablets/lenovo.c
> +++ b/drivers/platform/x86/x86-android-tablets/lenovo.c
> @@ -10,6 +10,8 @@
>  
>  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>  
> +#include <linux/cleanup.h>
> +#include <linux/device.h>
>  #include <linux/efi.h>
>  #include <linux/gpio/machine.h>
>  #include <linux/gpio/property.h>
> @@ -114,6 +116,32 @@ static const struct software_node lenovo_yb1_x90_hideep_ts_node = {
>  	.properties = lenovo_yb1_x90_hideep_ts_props,
>  };
>  
> +static const struct property_entry lenovo_yb1_x9x_drv2604l_0_props[] = {
> +	PROPERTY_ENTRY_U32("vib-rated-mv", 1500),
> +	PROPERTY_ENTRY_U32("vib-overdrive-mv", 2100),
> +	PROPERTY_ENTRY_U32("mode", 0), /* LRA */
> +	PROPERTY_ENTRY_U32("library-sel", 0), /* DRV260X_LIB_EMPTY */

Please align the comments. If there's enough space to add one tab to the 
second line, please add that as well so these comments don't mix with the
code.

> +	PROPERTY_ENTRY_GPIO("enable-gpios", &cherryview_gpiochip_nodes[0], 79, GPIO_ACTIVE_HIGH),
> +	{}
> +};
> +
> +static const struct software_node lenovo_yb1_x9x_drv2604l_0_node = {
> +	.properties = lenovo_yb1_x9x_drv2604l_0_props,
> +};
> +
> +static const struct property_entry lenovo_yb1_x9x_drv2604l_1_props[] = {
> +	PROPERTY_ENTRY_U32("vib-rated-mv", 1500),
> +	PROPERTY_ENTRY_U32("vib-overdrive-mv", 2100),
> +	PROPERTY_ENTRY_U32("mode", 0), /* LRA */
> +	PROPERTY_ENTRY_U32("library-sel", 0), /* DRV260X_LIB_EMPTY */

Ditto.

-- 
 i.

> +	PROPERTY_ENTRY_GPIO("enable-gpios", &cherryview_gpiochip_nodes[1], 47, GPIO_ACTIVE_HIGH),
> +	{}
> +};
> +
> +static const struct software_node lenovo_yb1_x9x_drv2604l_1_node = {
> +	.properties = lenovo_yb1_x9x_drv2604l_1_props,
> +};
> +
>  static const struct x86_i2c_client_info lenovo_yb1_x90_i2c_clients[] __initconst = {
>  	{
>  		/* BQ27542 fuel-gauge */
> @@ -159,6 +187,24 @@ static const struct x86_i2c_client_info lenovo_yb1_x90_i2c_clients[] __initconst
>  			.polarity = ACPI_ACTIVE_LOW,
>  			.con_id = "wacom_irq",
>  		},
> +	}, {
> +		/* Keyboard haptics driver */
> +		.board_info = {
> +			.type = "drv2604l",
> +			.addr = 0x5a,
> +			.dev_name = "drv2604l.0",
> +			.swnode = &lenovo_yb1_x9x_drv2604l_0_node,
> +		},
> +		.adapter_path = "\\_SB_.PCI0.I2C1",
> +	}, {
> +		/* Keyboard haptics driver */
> +		.board_info = {
> +			.type = "drv2604l",
> +			.addr = 0x5a,
> +			.dev_name = "drv2604l.1",
> +			.swnode = &lenovo_yb1_x9x_drv2604l_1_node,
> +		},
> +		.adapter_path = "\\_SB_.PCI0.I2C4",
>  	}, {
>  		/* LP8557 Backlight controller */
>  		.board_info = {
> @@ -283,9 +329,57 @@ static const struct x86_i2c_client_info lenovo_yogabook_x91_i2c_clients[] __init
>  	},
>  };
>  
> +#define YB1_X91_DRV2604L_0_DEVICE "i2c-DRV2604:00"
> +#define YB1_X91_DRV2604L_1_DEVICE "i2c-DRV2604:01"
> +
> +static int __init lenovo_yb1_x91_init(struct device *dev)
> +{
> +	int ret = 0;
> +
> +	struct device *drv2604l_0_dev __free(put_device) =
> +		bus_find_device_by_name(&i2c_bus_type, NULL,
> +					YB1_X91_DRV2604L_0_DEVICE);
> +	if (!drv2604l_0_dev) {
> +		pr_err("error: cannot find %s device\n",
> +		       YB1_X91_DRV2604L_0_DEVICE);
> +		return -ENODEV;
> +	}
> +
> +	ret = device_create_managed_software_node(drv2604l_0_dev,
> +						  lenovo_yb1_x9x_drv2604l_0_props,
> +						  NULL);
> +	if (ret) {
> +		pr_err("error: cannot create software node for %s: %d\n",
> +		       YB1_X91_DRV2604L_0_DEVICE, ret);
> +		return ret;
> +	}
> +
> +	struct device *drv2604l_1_dev __free(put_device) =
> +		bus_find_device_by_name(&i2c_bus_type, NULL,
> +					YB1_X91_DRV2604L_1_DEVICE);
> +	if (!drv2604l_1_dev) {
> +		pr_err("error: cannot find %s device\n",
> +		       YB1_X91_DRV2604L_1_DEVICE);
> +		return -ENODEV;
> +	}
> +
> +	ret = device_create_managed_software_node(drv2604l_1_dev,
> +						  lenovo_yb1_x9x_drv2604l_1_props,
> +						  NULL);
> +	if (ret) {
> +		pr_err("error: cannot create software node for %s\n",
> +		       YB1_X91_DRV2604L_1_DEVICE);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
>  const struct x86_dev_info lenovo_yogabook_x91_info __initconst = {
>  	.i2c_client_info = lenovo_yogabook_x91_i2c_clients,
>  	.i2c_client_count = ARRAY_SIZE(lenovo_yogabook_x91_i2c_clients),
> +	.gpiochip_type = X86_GPIOCHIP_CHERRYVIEW,
> +	.init = lenovo_yb1_x91_init,
>  };
>  
>  /* Lenovo Yoga Tablet 2 1050F/L's Android factory image has everything hardcoded */
> 
>