public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: jeyr@codeaurora.org
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, gregkh@linuxfoundation.org,
	linux-kernel@vger.kernel.org, fastrpc.upstream@qti.qualcomm.com
Subject: Re: [PATCH 1/5] dt-bindings: misc: convert fastrpc bindings to yaml and add property
Date: Fri, 26 Nov 2021 10:24:10 +0530	[thread overview]
Message-ID: <9fc77d606794bbad7666942691b1c7ee@codeaurora.org> (raw)
In-Reply-To: <be50fe57-e109-370d-621b-66bff479b46e@linaro.org>

On 2021-11-25 20:11, Srinivas Kandagatla wrote:
> Hi Jeya,
> 
> You should retain the original patch ownership while sending the 
> patches.
Sure Srini, will add new property as dependent to yaml conversion patch.
> 
> On 25/11/2021 14:15, Jeya R wrote:
>> Convert Qualcomm FastRPC bindings to yaml format and add a property
>> to set dsp domain as non-secure.
>> 
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> Signed-off-by: Jeya R <jeyr@codeaurora.org>
>> ---
>>   .../devicetree/bindings/misc/qcom,fastrpc.txt      | 78 
>> -----------------
>>   .../devicetree/bindings/misc/qcom,fastrpc.yaml     | 97 
>> ++++++++++++++++++++++
>>   2 files changed, 97 insertions(+), 78 deletions(-)
>>   delete mode 100644 
>> Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
>>   create mode 100644 
>> Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt 
>> b/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
>> deleted file mode 100644
>> index 2a1827a..0000000
>> --- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
>> +++ /dev/null
>> @@ -1,78 +0,0 @@
>> -Qualcomm Technologies, Inc. FastRPC Driver
>> -
>> -The FastRPC implements an IPC (Inter-Processor Communication)
>> -mechanism that allows for clients to transparently make remote method
>> -invocations across DSP and APPS boundaries. This enables developers
>> -to offload tasks to the DSP and free up the application processor for
>> -other tasks.
>> -
>> -- compatible:
>> -	Usage: required
>> -	Value type: <stringlist>
>> -	Definition: must be "qcom,fastrpc"
>> -
>> -- label
>> -	Usage: required
>> -	Value type: <string>
>> -	Definition: should specify the dsp domain name this fastrpc
>> -	corresponds to. must be one of this: "adsp", "mdsp", "sdsp", "cdsp"
>> -
>> -- #address-cells
>> -	Usage: required
>> -	Value type: <u32>
>> -	Definition: Must be 1
>> -
>> -- #size-cells
>> -	Usage: required
>> -	Value type: <u32>
>> -	Definition: Must be 0
>> -
>> -= COMPUTE BANKS
>> -Each subnode of the Fastrpc represents compute context banks 
>> available
>> -on the dsp.
>> -- All Compute context banks MUST contain the following properties:
>> -
>> -- compatible:
>> -	Usage: required
>> -	Value type: <stringlist>
>> -	Definition: must be "qcom,fastrpc-compute-cb"
>> -
>> -- reg
>> -	Usage: required
>> -	Value type: <u32>
>> -	Definition: Context Bank ID.
>> -
>> -- qcom,nsessions:
>> -	Usage: Optional
>> -	Value type: <u32>
>> -	Defination: A value indicating how many sessions can share this
>> -		    context bank. Defaults to 1 when this property
>> -		    is not specified.
>> -
>> -Example:
>> -
>> -adsp-pil {
>> -	compatible = "qcom,msm8996-adsp-pil";
>> -	...
>> -	smd-edge {
>> -		label = "lpass";
>> -		fastrpc {
>> -			compatible = "qcom,fastrpc";
>> -			qcom,smd-channels = "fastrpcsmd-apps-dsp";
>> -			label = "adsp";
>> -			#address-cells = <1>;
>> -			#size-cells = <0>;
>> -
>> -			cb@1 {
>> -				compatible = "qcom,fastrpc-compute-cb";
>> -				reg = <1>;
>> -			};
>> -
>> -			cb@2 {
>> -				compatible = "qcom,fastrpc-compute-cb";
>> -				reg = <2>;
>> -			};
>> -			...
>> -		};
>> -	};
>> -};
>> diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml 
>> b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
>> new file mode 100644
>> index 0000000..c3fe39b2
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
>> @@ -0,0 +1,97 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/misc/qcom,fastrpc.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Qualcomm Technologies, Inc. FastRPC Driver
>> +
>> +maintainers:
>> +  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> +
>> +description: |
>> +  This binding describes Qualcomm FastRPC an IPC (Inter-Processor 
>> Communication)
>> +  mechanism that allows for clients to transparently make remote 
>> method
>> +  invocations across DSP and APPS boundaries. This enables developers
>> +  to offload tasks to the DSP and free up the application processor 
>> for
>> +  other tasks.
>> +
>> +properties:
>> +  compatible:
>> +    const: qcom,fastrpc
>> +
>> +  label:
>> +    enum:
>> +      - adsp
>> +      - mdsp
>> +      - sdsp
>> +      - cdsp
>> +
>> +  qcom,non-secure-domain: true
>> +    # Specify that dsp domain is non-secure.
>> +
> 
> This change was not there in the original patch that I shared, you
> should add this change in a separate patch, as first patch converts to
> yaml and next one adds new bindings.
> 
> This is also not following yaml style bindings.
> Please take some time to look at
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/example-schema.yaml?h=v5.16-rc2
> to add new binding.
> 
> 
> 
> --srini
This will be corrected as a new patch. Thanks.

> 
>> +  "#address-cells":
>> +    const: 1
>> +
>> +  "#size-cells":
>> +    const: 0
>> +
>> +patternProperties:
>> +  "^cb@[0-9a-f]$":
>> +    type: object
>> +    description: |
>> +      Compute context bank
>> +
>> +    properties:
>> +      compatible:
>> +        const: qcom,fastrpc-compute-cb
>> +
>> +      reg:
>> +        maxItems: 1
>> +        description: Context Bank ID
>> +
>> +      qcom,nsessions:
>> +        $ref: /schemas/types.yaml#/definitions/uint32
>> +        description: How many sessions can share this context bank.
>> +                     Defaults to 1 when this property is not 
>> specified.
>> +
>> +    required:
>> +      - compatible
>> +      - reg
>> +
>> +    additionalProperties: false
>> +
>> +required:
>> +  - compatible
>> +  - label
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    adsp-pil {
>> +        compatible = "qqcom,msm8996-adsp-pil";
>> +
>> +        smd-edge {
>> +            label = "lpass";
>> +
>> +            fastrpc {
>> +                compatible = "qcom,fastrpc";
>> +                label = "adsp";
>> +                #address-cells = <1>;
>> +                #size-cells = <0>;
>> +
>> +                cb@1 {
>> +                    compatible = "qcom,fastrpc-compute-cb";
>> +                    reg = <1>;
>> +                };
>> +
>> +                cb@2 {
>> +                    compatible = "qcom,fastrpc-compute-cb";
>> +                    reg = <2>;
>> +                };
>> +            };
>> +        };
>> +    };
>> +
>> +
>> 

  reply	other threads:[~2021-11-26  4:56 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-25 14:15 [PATCH 0/5] Add secure domains support Jeya R
2021-11-25 14:15 ` [PATCH 1/5] dt-bindings: misc: convert fastrpc bindings to yaml and add property Jeya R
2021-11-25 14:41   ` Srinivas Kandagatla
2021-11-26  4:54     ` jeyr [this message]
2021-11-25 14:15 ` [PATCH 2/5] misc: fastrpc: Add secure device node support Jeya R
2021-11-25 14:55   ` Srinivas Kandagatla
2021-11-25 15:45   ` Greg KH
2021-11-25 14:15 ` [PATCH 3/5] misc: fastrpc: Set channel as secure Jeya R
2021-11-25 14:15 ` [PATCH 4/5] misc: fastrpc: reject non-secure node for secure domain Jeya R
2021-11-25 14:15 ` [PATCH 5/5] arm64: dts: qcom: add non-secure domain property to fastrpc nodes Jeya R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9fc77d606794bbad7666942691b1c7ee@codeaurora.org \
    --to=jeyr@codeaurora.org \
    --cc=fastrpc.upstream@qti.qualcomm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox