messages from 2009-04-30 22:45:18 to 2009-05-01 03:55:46 UTC [more...]
[PATCH 0/3] [GIT PULL] tracing/ringbuffer: updates for tip
2009-05-01 3:55 UTC (14+ messages)
` [PATCH 1/3] ring-buffer: add counters for commit overrun and nmi dropped entries
` [PATCH 2/3] tracing: export stats of ring buffers to userspace
` [PATCH 3/3] ring-buffer: make cpu buffer entries counter atomic
TSC marked unstable on suspend and resume
2009-05-01 3:13 UTC (5+ messages)
Swappiness vs. mmap() and interactive response
2009-05-01 3:09 UTC (11+ messages)
` [PATCH] vmscan: evict use-once pages first
` [PATCH] vmscan: evict use-once pages first (v2)
[RFC] IO Controller
2009-05-01 3:00 UTC (4+ messages)
regression with i915 and acpi video driver
2009-05-01 2:50 UTC
[patch 20/22] vmscan: avoid multiplication overflow in shrink_zone()
2009-05-01 2:49 UTC (2+ messages)
No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
2009-05-01 2:51 UTC (12+ messages)
[PATCH 0/6] kill-the-BKL/reiserfs3: performance improvements, faster than Bkl based scheme
2009-05-01 2:44 UTC (7+ messages)
` [PATCH 1/6] kill-the-BKL/reiserfs: release write lock on fs_changed()
` [PATCH 2/6] kill-the-BKL/reiserfs: release the write lock before rescheduling on do_journal_end()
` [PATCH 3/6] kill-the-BKL/reiserfs: release write lock while rescheduling on prepare_for_delete_or_cut()
` [PATCH 4/6] kill-the-BKL/reiserfs: release the write lock inside get_neighbors()
` [PATCH 5/6] kill-the-BKL/reiserfs: release the write lock inside reiserfs_read_bitmap_block()
` [PATCH 6/6] kill-the-BKL/reiserfs: release the write lock on flush_commit_list()
[PATCH] scsi: ses check name in enclosure_component_register
2009-05-01 2:13 UTC (9+ messages)
` [PATCH] scsi: ses check name in enclosure_component_register -v2
[PATCH] blktrace: swap arg name "from" and "to" of blk_add_trace_remap
2009-05-01 2:13 UTC (5+ messages)
` Subject: [PATCH] from-sector redundant in trace_block_remap
[PATCH 0/8] section name cleanup for powerpc
2009-05-01 1:56 UTC (11+ messages)
` [PATCH 1/8] powerpc: Remove unused __page_aligned macro
` [PATCH 2/8] powerpc: share .data output section definition between 32 and 64 bits
` [PATCH 3/8] powerpc: Use macros for .data.page_aligned section
` [PATCH 4/8] powerpc: use NOSAVE_DATA macro for .data.nosave section
` [PATCH 5/8] powerpc: use new macro for .data.cacheline_aligned section
` [PATCH 6/8] powerpc: use new macros for .data.init_task
` [PATCH 7/8] powerpc: use new macro for .data.read_mostly section
` [PATCH 8/8] powerpc: convert to new generic read_mostly support
[PATCH v2] cpuacct: VIRT_CPU_ACCOUNTING don't prevent percpu cputime count
2009-05-01 1:45 UTC (3+ messages)
Probe Timeouts with 47afbaf5af9454a7a1a64591e20cbfcc27ca67a8
2009-05-01 1:38 UTC
mmotm 2009-04-30-17-55 uploaded
2009-05-01 0:55 UTC
PROBLEM: 2.6.29.2 - AGP doesn't work anymore on my nforce2
2009-05-01 0:59 UTC (2+ messages)
[PATCH] Intel IOMMU Pass Through Support
2009-05-01 0:57 UTC (7+ messages)
Q: selinux_bprm_committed_creds() && signals/do_wait
2009-05-01 0:50 UTC (11+ messages)
` [PATCH] do_wait: do take security_task_wait() into account
` ptrace: selinux_bprm_committed_creds: simplify __wake_up_parent() code and s/parent/real_parent/
[PATCH] - Fix memory corruption in slbq
2009-05-01 0:41 UTC
[BUG] 2.6.30-rc4 hid bluetooth not working
2009-05-01 0:37 UTC
[PATCH 0/5] section name cleanup for ia64
2009-05-01 0:04 UTC (6+ messages)
` [PATCH 1/5] ia64: Use .ref.text, not .text.init for start_ap
` [PATCH 2/5] ia64: use new macro for .data.cacheline_aligned section
` [PATCH 3/5] ia64: use new macros for .data.init_task
` [PATCH 4/5] ia64: use new macro for .data.read_mostly section
` [PATCH 5/5] ia64: convert to new generic read_mostly support
[PATCH 00/11] section name cleanup for x86
2009-05-01 0:01 UTC (12+ messages)
` [PATCH 01/11] x86: Use macros for .bss.page_aligned section
` [PATCH 02/11] x86: Use section .data.page_aligned for the idt_table
` [PATCH 03/11] x86: Use macros for .data.page_aligned
` [PATCH 04/11] x86: convert compressed loader to use __HEAD and HEAD_TEXT macros
` [PATCH 05/11] x86: convert "
` [PATCH 06/11] x86: use NOSAVE_DATA macro for .data.nosave section
` [PATCH 07/11] x86: use new macro for .data.cacheline_aligned section
` [PATCH 08/11] x86: use new macros for .data.init_task
` [PATCH 09/11] x86: fix fragile computation of vsyscall address
` [PATCH 10/11] x86: use new macro for .data.read_mostly section
` [PATCH 11/11] x86: convert to new generic read_mostly support
[PATCH 0/6] section name cleanup for s390
2009-04-30 23:57 UTC (7+ messages)
` [PATCH 1/6] s390: Use macros for .data.page_aligned
` [PATCH 2/6] s390: use NOSAVE_DATA macro for .data.nosave section
` [PATCH 3/6] s390: use new macro for .data.cacheline_aligned section
` [PATCH 4/6] s390: use new macros for .data.init_task
` [PATCH 5/6] s390: use new macro for .data.read_mostly section
` [PATCH 6/6] s390: convert to new generic read_mostly support
[patch 00/88] 2.6.28.10-stable review
2009-05-01 0:07 UTC (4+ messages)
[PATCH] section name cleanup for um
2009-04-30 23:59 UTC (2+ messages)
` [PATCH] um: use new macros for .data.init_task
[PATCH] ftrace: use .sched.text, not .text.sched in recordmcount.pl
2009-05-01 0:06 UTC
[PATCH 0/7] section name cleanup for sh
2009-04-30 23:58 UTC (8+ messages)
` [PATCH 1/7] sh: Use macros for .bss.page_aligned section
` [PATCH 2/7] sh: Use macros for .data.page_aligned section
` [PATCH 3/7] sh: use NOSAVE_DATA macro for .data.nosave section
` [PATCH 4/7] sh: use new macro for .data.cacheline_aligned section
` [PATCH 5/7] sh: use new macros for .data.init_task
` [PATCH 6/7] sh: use new macro for .data.read_mostly section
` [PATCH 7/7] sh: convert to new generic read_mostly support
[PATCH 0/4] section name cleanup for sparc
2009-04-30 23:58 UTC (5+ messages)
` [PATCH 1/4] sparc: use new macro for .data.cacheline_aligned section
` [PATCH 2/4] sparc: use new macros for .data.init_task
` [PATCH 3/4] sparc: use new macro for .data.read_mostly section
` [PATCH 4/4] sparc: convert to new generic read_mostly support
[PATCH 0/3] section name cleanup for xtensa
2009-05-01 0:00 UTC (4+ messages)
` [PATCH 1/3] xtensa: Use macros for .bss.page_aligned section
` [PATCH 2/3] xtensa: use new macro for .data.cacheline_aligned section
` [PATCH 3/3] xtensa: use new macros for .data.init_task
[PATCH 0/5] section name cleanup for parisc
2009-04-30 23:55 UTC (6+ messages)
` [PATCH 1/5] parisc: use NOSAVE_DATA macro for .data.nosave section
` [PATCH 2/5] parisc: use new macro for .data.cacheline_aligned section
` [PATCH 3/5] parisc: use new macros for .data.init_task
` [PATCH 4/5] parisc: use new macro for .data.read_mostly section
` [PATCH 5/5] parisc: convert to new generic read_mostly support
[PATCH 0/6] section name cleanup for mn10300
2009-04-30 23:54 UTC (7+ messages)
` [PATCH 1/6] mn10300: Use macros for .bss.page_aligned section
` [PATCH 2/6] mn10300: Drop unused .data.idt section
` [PATCH 3/6] mn10300: use NOSAVE_DATA macro for .data.nosave section
` [PATCH 4/6] mn10300: use new macro for .data.cacheline_aligned section
` [PATCH 5/6] mn10300: use new macros for .data.init_task
` [PATCH 6/6] mn10300: use new macro for .data.read_mostly section
[PATCH 0/4] section name cleanup for mips
2009-04-30 23:53 UTC (5+ messages)
` [PATCH 1/4] mips: use NOSAVE_DATA macro for .data.nosave section
` [PATCH 2/4] mips: use new macro for .data.cacheline_aligned section
` [PATCH 3/4] mips: use new macros for .data.init_task
` [PATCH 4/4] mips: use .text, not .text.start, for lasat boot loader
[PATCH 0/2] section name cleanup for h8300
2009-04-30 23:46 UTC (3+ messages)
` [PATCH 1/2] h8300: use new macros for .data.init_task
` [PATCH 2/2] h8300: use .head.text for compressed bootloader
[PATCH 0/2] section name cleanup for m68knommu
2009-04-30 23:50 UTC (3+ messages)
` [PATCH 1/2] m68knommu: use new macro for .data.cacheline_aligned section
` [PATCH 2/2] m68knommu: use new macros for .data.init_task
[PATCH 0/2] section name cleanup for m68k
2009-04-30 23:49 UTC (3+ messages)
` [PATCH 1/2] m68k: use new macro for .data.cacheline_aligned section
` [PATCH 2/2] m68k: use new macros for .data.init_task
[PATCH 0/2] section name cleanup for microblaze
2009-04-30 23:51 UTC (3+ messages)
` [PATCH 1/2] microblaze: use new macro for .data.cacheline_aligned section
` [PATCH 2/2] microblaze: use new macros for .data.init_task
[PATCH 0/3] section name cleanup for m32r
2009-04-30 23:48 UTC (4+ messages)
` [PATCH 1/3] m32r: use NOSAVE_DATA macro for .data.nosave section
` [PATCH 2/3] m32r: use new macro for .data.cacheline_aligned section
` [PATCH 3/3] m32r: use new macros for .data.init_task
[PATCH] section name cleanup for cris
2009-04-30 23:44 UTC (2+ messages)
` [PATCH] cris: use new macros for .data.init_task
[PATCH 0/3] section name cleanup for frv
2009-04-30 23:45 UTC (4+ messages)
` [PATCH 1/3] frv: use new macro for .data.cacheline_aligned section
` [PATCH 2/3] frv: use new macros for .data.init_task
` [PATCH 3/3] frv: rename .text.foo sections to .text..foo
[PATCH 0/9] Some work for spi_mpc83xx driver, spi-mmc support for MPC8610HPCD
2009-04-30 23:48 UTC (10+ messages)
` [PATCH 1/9] spi_mpc83xx: Handles other Freescale processors
` [PATCH 2/9] spi_mpc83xx: Quieten down the "Requested speed is too low" message
` [PATCH 3/9] spi_mpc83xx: Add small delay after asserting chip-select line
` [PATCH 4/9] powerpc/86xx: Add MMC SPI support for MPC8610HPCD boards
` [PATCH 5/9] spi_mpc83xx: Fix checkpatch issues
` [PATCH 6/9] spi_mpc83xx: Split mpc83xx_spi_work() into two routines
` [PATCH 7/9] spi_mpc83xx: Remove dead code
` [PATCH 8/9] spi_mpc83xx: Rename spi_83xx.c to spi_8xxx.c
` [PATCH 9/9] spi_mpc8xxx: s/83xx/8xxx/g
[PATCH 0/6] section name cleanup for arm
2009-04-30 23:40 UTC (7+ messages)
` [PATCH 1/6] arm: use _AC(1, UL) when defining PAGE_SIZE
` [PATCH 2/6] arm: convert to use __HEAD and HEAD_TEXT macros
` [PATCH 3/6] arm: use NOSAVE_DATA macro for .data.nosave section
` [PATCH 4/6] arm: use new macro for .data.cacheline_aligned section
` [PATCH 5/6] arm: use new macros for .data.init_task
` [PATCH 6/6] arm: use PERCPU macro in linker script
[PATCH 0/3] section name cleanup for avr32
2009-04-30 23:42 UTC (4+ messages)
` [PATCH 1/3] avr32: Use standard macros for .data.page_aligned section
` [PATCH 2/3] avr32: use new macro for .data.cacheline_aligned section
` [PATCH 3/3] avr32: use new macros for .data.init_task
[PATCH] section name cleanup for blackfin
2009-04-30 23:43 UTC (2+ messages)
` [PATCH] blackfin: use new macro for .data.cacheline_aligned section
[PATCH 0/2] kconfig: updates to streamline_config.pl
2009-04-30 23:36 UTC (3+ messages)
` [PATCH 1/2] kconfig: unset IKCONFIG_PROC and clean up nesting
` [PATCH 2/2] kconfig: test for /boot/config-uname after /proc/config.gz in localconfig
Implementing NVMHCI
2009-04-30 23:36 UTC (5+ messages)
What's in hid.git for 2.6.30
2009-04-30 23:37 UTC (6+ messages)
Slow clock on AMD 740G chipset
2009-04-30 23:17 UTC (8+ messages)
[PATCH 0/4] section name cleanup for alpha
2009-04-30 23:00 UTC (5+ messages)
` [PATCH 1/4] alpha: Use macros for .data.page_aligned
` [PATCH 2/4] alpha: use new macro for .data.cacheline_aligned section
` [PATCH 3/4] alpha: make THREAD_SIZE available to assembly files
` [PATCH 4/4] alpha: use .data.init_task instead of .data.init_thread
[patch] oom: prevent livelock when oom_kill_allocating_task is set
2009-04-30 22:58 UTC (3+ messages)
[PATCH 0/7] kconfig: more featured minimum module configs
2009-04-30 22:55 UTC (9+ messages)
` [PATCH 3/7] kconfig: enable CONFIG_IKCONFIG from streamline_config.pl
` [PATCH 7/7] kconfig: search for a config to base the local(mod|yes)config on
Ricoh R5C822 and QUIRK_FORCE_DMA
2009-04-30 22:45 UTC
[PATCH] fiemap: fix problem with setting FIEMAP_EXTENT_LAST
2009-04-30 22:40 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox