From: Mikko Perttunen <mperttunen@nvidia.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thierry Reding <thierry.reding@kernel.org>,
Jonathan Hunter <jonathanh@nvidia.com>,
Svyatoslav Ryhel <clamor95@gmail.com>,
Svyatoslav Ryhel <clamor95@gmail.com>
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 07/10] ARM: tegra: tf701t: Fix BCM43341 WiFi/BT chip configuration
Date: Tue, 28 Jul 2026 21:13:05 +0900 [thread overview]
Message-ID: <AHCWpU8lS5mcA3Do5U45Xw@nvidia.com> (raw)
In-Reply-To: <20260721101059.451699-8-clamor95@gmail.com>
On Tuesday, July 21, 2026 7:10 PM Svyatoslav Ryhel wrote:
> Drop reset GPIO from bluetooth part. Add lpo clock to both WiFi and
> bluetooth nodes. Add 'brcm,bcm43340-fmac' as primary compatible and
> 'brcm,bcm4329-fmac' remains as fallback.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts
> index 3de5c84d5f009..b71a02b3fd86f 100644
> --- a/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts
> +++ b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts
> @@ -1300,8 +1300,9 @@ bluetooth {
> compatible = "brcm,bcm4334-bt";
> max-speed = <4000000>;
>
> - clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
> - clock-names = "txco";
> + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>,
> + <&palmas_clk32k>;
> + clock-names = "txco", "lpo";
>
> interrupt-parent = <&gpio>;
> interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
> @@ -1309,7 +1310,6 @@ bluetooth {
>
> device-wakeup-gpios = <&gpio TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>;
> shutdown-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
> - reset-gpios = <&gpio TEGRA_GPIO(Q, 6) GPIO_ACTIVE_LOW>;
I'd appreciate a note in the commit message on why this is dropped.
>
> vbat-supply = <&vdd_3v3_com>;
> vddio-supply = <&vdd_1v8_vio>;
> @@ -1450,7 +1450,7 @@ palmas_gpio: gpio {
> #gpio-cells = <2>;
> };
>
> - palmas_clk32kg@0 {
> + palmas_clk32k: palmas_clk32kg@0 {
> compatible = "ti,palmas-clk32kg";
> #clock-cells = <0>;
> };
> @@ -2382,9 +2382,12 @@ mmc@78000000 {
> vqmmc-supply = <&vdd_1v8_vio>;
>
> wifi@1 {
> - compatible = "brcm,bcm4329-fmac";
> + compatible = "brcm,bcm43340-fmac", "brcm,bcm4329-fmac";
> reg = <1>;
>
> + clocks = <&palmas_clk32k>;
> + clock-names = "lpo";
> +
> interrupt-parent = <&gpio>;
> interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "host-wake";
> --
> 2.53.0
>
>
next prev parent reply other threads:[~2026-07-28 12:13 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-21 10:10 [PATCH v2 00/10] ARM: tegra: tf701t: Add new features Svyatoslav Ryhel
2026-07-21 10:10 ` [PATCH v2 01/10] ARM: tegra: tf701t: Configure CPU DFLL clock node Svyatoslav Ryhel
2026-07-21 10:10 ` [PATCH v2 02/10] ARM: tegra: tf701t: Add core-supply to PMC node Svyatoslav Ryhel
2026-07-21 10:10 ` [PATCH v2 03/10] ARM: tegra: tf701t: Add MC and EMC timing nodes Svyatoslav Ryhel
2026-07-21 10:10 ` [PATCH v2 04/10] ARM: tegra: tf701t: Remove pin_ prefix from PMIC pinmux Svyatoslav Ryhel
2026-07-21 10:10 ` [PATCH v2 05/10] ARM: tegra: tf701t: Add thermal zones for nct1008 sensor Svyatoslav Ryhel
2026-07-21 10:10 ` [PATCH v2 06/10] ARM: tegra: tf701t: Tune MMC devices Svyatoslav Ryhel
2026-07-28 12:09 ` Mikko Perttunen
2026-07-28 14:17 ` Svyatoslav Ryhel
2026-07-21 10:10 ` [PATCH v2 07/10] ARM: tegra: tf701t: Fix BCM43341 WiFi/BT chip configuration Svyatoslav Ryhel
2026-07-28 12:13 ` Mikko Perttunen [this message]
2026-07-28 14:08 ` Svyatoslav Ryhel
2026-07-21 10:10 ` [PATCH v2 08/10] ARM: tegra: tf701t: Complete power sensor node Svyatoslav Ryhel
2026-07-21 10:10 ` [PATCH v2 09/10] ARM: tegra: tf701t: Configure UART-B line used for GPS Svyatoslav Ryhel
2026-07-21 10:10 ` [PATCH v2 10/10] ARM: tegra: tf701t: Add chosen node Svyatoslav Ryhel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AHCWpU8lS5mcA3Do5U45Xw@nvidia.com \
--to=mperttunen@nvidia.com \
--cc=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh@kernel.org \
--cc=thierry.reding@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox