From: Wanlong Gao <wanlong.gao@gmail.com>
To: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: sameo@linux.intel.com, haojian.zhuang@gmail.com,
linux-kernel@vger.kernel.org,
Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Subject: Re: [PATCH 06/13] mfd: pxa-w1: MFD driver for PXA 1wire control + DS1WM chip
Date: Thu, 14 Apr 2011 22:17:55 +0800 [thread overview]
Message-ID: <BANLkTinf6kB_ifDd-D+cLDHV7SAu0P+wfg@mail.gmail.com> (raw)
In-Reply-To: <1302706264-25815-7-git-send-email-haojian.zhuang@marvell.com>
On 4/13/11, Haojian Zhuang <haojian.zhuang@marvell.com> wrote:
> This driver provides registers and IRQ of PXA3xx chips to the ds1wm driver.
>
> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
> ---
> drivers/mfd/Kconfig | 7 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/pxa-w1.c | 150
> ++++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 158 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mfd/pxa-w1.c
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index e2fea58..b6ecf90 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -34,6 +34,13 @@ config MFD_88PM860X
> select individual components like voltage regulators, RTC and
> battery-charger under the corresponding menus.
>
> +config MFD_PXA_DS1WM
> + tristate "Support DS1WM chip on Marvell silicons"
> + select MFD_CORE
> + help
> + This core driver provides register access for PXA_DS1WM.
> + Actual functionality is handled by the ds1wm drivers.
> +
> config MFD_SM501
> tristate "Support for Silicon Motion SM501"
> ---help---
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 419caa9..4f8d1d2 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -4,6 +4,7 @@
>
> 88pm860x-objs := 88pm860x-core.o 88pm860x-i2c.o
> obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
> +obj-$(CONFIG_MFD_PXA_DS1WM) += pxa-w1.o
> obj-$(CONFIG_MFD_SM501) += sm501.o
> obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
>
> diff --git a/drivers/mfd/pxa-w1.c b/drivers/mfd/pxa-w1.c
> new file mode 100644
> index 0000000..98074ff
> --- /dev/null
> +++ b/drivers/mfd/pxa-w1.c
> @@ -0,0 +1,150 @@
> +/*
> + * Core driver for PXA DS1WM chip.
> + *
> + * Copyright (C) 2010 Marvell <jtzhou@marvell.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/gpio.h>
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/ds1wm.h>
> +
> +struct pxa_w1_info {
> + struct clk *clk;
> +};
> +
> +static int ds1wm_enable(struct platform_device *pdev)
> +{
> + struct device *dev = pdev->dev.parent;
> + struct pxa_w1_info *info = dev_get_drvdata(dev);
> +
> + clk_enable(info->clk);
> + dev_dbg(dev, "pxa DS1WM clk (active)\n");
> + return 0;
> +}
> +
> +static int ds1wm_disable(struct platform_device *pdev)
> +{
> + struct device *dev = pdev->dev.parent;
> + struct pxa_w1_info *info = dev_get_drvdata(dev);
> +
> + clk_disable(info->clk);
> + dev_dbg(dev, "pxa DS1WM clk (in-active)\n");
> + return 0;
> +}
> +
> +static struct resource ds1wm_resources[] __devinitdata = {
> + {0, 0, "ds1wm-mem", IORESOURCE_MEM,},
> + {0, 0, "ds1wm-irq", IORESOURCE_IRQ,},
> +};
> +
> +static struct ds1wm_driver_data ds1wm_pdata;
> +
> +static struct mfd_cell ds1wm_cell __devinitdata = {
> + .name = "ds1wm",
> + .enable = ds1wm_enable,
> + .disable = ds1wm_disable,
> + .platform_data = &ds1wm_pdata,
> + .pdata_size = sizeof(ds1wm_pdata),
> + .num_resources = ARRAY_SIZE(ds1wm_resources),
> + .resources = ds1wm_resources,
> +};
> +
> +static int __devinit pxa_w1_probe(struct platform_device *pdev)
> +{
> + struct ds1wm_driver_data *pdata = pdev->dev.platform_data;
> + struct pxa_w1_info *info;
> + struct resource *r;
> + int ret, irq;
> +
> + info = kzalloc(sizeof(struct pxa_w1_info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> + if (r == NULL) {
Prefer to (!r) ?
> + ret = -ENXIO;
> + goto out;
> + }
> + irq = r->start;
> + if (pdata)
> + ds1wm_pdata.active_high = pdata->active_high;
> + if (ds1wm_pdata.active_high)
> + ds1wm_resources[1].flags |= IORESOURCE_IRQ_HIGHEDGE;
> + else
> + ds1wm_resources[1].flags |= IORESOURCE_IRQ_LOWEDGE;
> +
> + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (r == NULL) {
The same ?
> + ret = -ENXIO;
> + goto out;
> + }
> + ds1wm_resources[0].end = resource_size(r) - 1;
> +
> + info->clk = clk_get(&pdev->dev, NULL);
> + if (IS_ERR(info->clk)) {
> + ret = PTR_ERR(info->clk);
> + goto out;
> + }
> + platform_set_drvdata(pdev, info);
> +
> + ds1wm_pdata.clock_rate = clk_get_rate(info->clk);
> + ret = mfd_add_devices(&pdev->dev, pdev->id, &ds1wm_cell, 1, r, irq);
> + if (ret < 0)
> + dev_err(&pdev->dev, "failed to register pxa DS1WM\n");
> +
> + return 0;
> +out:
> + kfree(info);
> + return ret;
> +}
> +
> +static int __devexit pxa_w1_remove(struct platform_device *pdev)
> +{
> + struct pxa_w1_info *info = platform_get_drvdata(pdev);
> +
> + mfd_remove_devices(&pdev->dev);
> + clk_put(info->clk);
> + kfree(info);
> + platform_set_drvdata(pdev, NULL);
> + return 0;
> +}
> +
> +static struct platform_driver pxa_w1_driver = {
> + .driver = {
> + .name = "pxa3xx-w1",
> + .owner = THIS_MODULE,
> + },
> + .probe = pxa_w1_probe,
> + .remove = __devexit_p(pxa_w1_remove),
> +};
> +
> +static int __init pxa_w1_base_init(void)
> +{
> + return platform_driver_register(&pxa_w1_driver);
> +}
> +
> +static void __exit pxa_w1_base_exit(void)
> +{
> + platform_driver_unregister(&pxa_w1_driver);
> +}
> +
> +module_init(pxa_w1_base_init);
> +module_exit(pxa_w1_base_exit);
> +
> +MODULE_AUTHOR("Jett Zhou <jtzhou@marvell.com>");
> +MODULE_DESCRIPTION("one wire driver for PXA");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:pxa-w1");
Best regards ,
Thanks
> --
> 1.5.6.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2011-04-14 14:17 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <2011041301>
2011-04-13 14:50 ` 1. Replace mfd_data with platform_data for 88pm860x since mfd tree is upgraded Haojian Zhuang
2011-04-13 14:50 ` [PATCH 01/13] input: touchscreen: use polling mode in 88pm860x Haojian Zhuang
2011-04-13 14:50 ` [PATCH 02/13] input: touchscreen: move initialization " Haojian Zhuang
2011-04-13 14:50 ` [PATCH 03/13] rtc: add 88pm860x rtc Haojian Zhuang
2011-04-13 14:50 ` [PATCH 04/13] input: set the long press detection in 88pm860x onkey Haojian Zhuang
2011-04-13 14:50 ` [PATCH 05/13] w1: add DS278x slave driver Haojian Zhuang
2011-04-13 14:50 ` [PATCH 06/13] mfd: pxa-w1: MFD driver for PXA 1wire control + DS1WM chip Haojian Zhuang
2011-04-13 14:50 ` [PATCH 07/13] mfd: fix build warning on 88pm860x Haojian Zhuang
2011-04-13 14:50 ` [PATCH 08/13] mfd: use platform_data in max8925 Haojian Zhuang
2011-04-13 14:51 ` [PATCH 09/13] input: get irq from resource in max8925 onkey Haojian Zhuang
2011-04-13 14:51 ` [PATCH 10/13] rtc: avoid to use hardcoding irq number in max8925 Haojian Zhuang
2011-04-13 14:51 ` [PATCH 11/13] power_supply: max8925: use platform_data from cell Haojian Zhuang
2011-04-13 14:51 ` [PATCH 12/13] regulator: check name in initialization of max8925 Haojian Zhuang
2011-04-13 14:51 ` [PATCH 13/13] regulator: max8925: enable i2c sequence for control Haojian Zhuang
2011-04-16 18:02 ` Mark Brown
2011-04-16 18:01 ` [PATCH 12/13] regulator: check name in initialization of max8925 Mark Brown
2011-04-18 13:49 ` Haojian Zhuang
2011-04-13 15:03 ` [PATCH 11/13] power_supply: max8925: use platform_data from cell Anton Vorontsov
2011-04-14 2:26 ` Haojian Zhuang
2011-04-14 2:16 ` Haojian Zhuang
2011-04-15 0:41 ` [PATCH 10/13] rtc: avoid to use hardcoding irq number in max8925 Wanlong Gao
2011-04-15 0:35 ` [PATCH 08/13] mfd: use platform_data " Wanlong Gao
2011-04-14 14:17 ` Wanlong Gao [this message]
2011-04-14 14:21 ` [PATCH 06/13] mfd: pxa-w1: MFD driver for PXA 1wire control + DS1WM chip Haojian Zhuang
2011-04-14 14:29 ` Wanlong Gao
2011-04-14 14:02 ` [PATCH 01/13] input: touchscreen: use polling mode in 88pm860x Wanlong Gao
2011-04-14 14:41 ` Haojian Zhuang
2011-04-14 14:52 ` Wanlong Gao
2011-04-16 12:46 ` Haojian Zhuang
2011-04-16 13:17 ` Wanlong Gao
2011-04-16 14:17 ` Valdis.Kletnieks
2011-04-18 13:12 ` Haojian Zhuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BANLkTinf6kB_ifDd-D+cLDHV7SAu0P+wfg@mail.gmail.com \
--to=wanlong.gao@gmail.com \
--cc=haojian.zhuang@gmail.com \
--cc=haojian.zhuang@marvell.com \
--cc=johnpol@2ka.mipt.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).