Re: [PATCH v4 3/4] arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards support

[Martin Botka <martin.botka@somainline.org>]

On Sun, Aug 13 2023 at 05:52:10 PM +02:00:00, Jernej Škrabec 
<jernej.skrabec@gmail.com> wrote:
> Hi Martin,
> 
> since this will be obviously delayed to 6.7 cycle due to mfd patch 
> not being
> merged in time, I have few nits below.
> 
> Dne ponedeljek, 07. avgust 2023 ob 16:53:23 CEST je Martin Botka 
> napisal(a):
>>  From: Martin Botka <martin.botka@somainline.org>
>> 
>>  CB1 is Compute Module style board that plugs into Rpi board style 
>> adapter or
>>  Manta 3D printer boards (M4P/M8P).
>> 
>>  The SoM features:
>>    - H616 SoC
>>    - 1GiB of RAM
>>    - AXP313A PMIC
>>    - RTL8189FTV WiFi
>> 
>>  Boards feature:
>>    - 4x USB via USB2 hub (usb1 on SoM).
>>    - SDcard slot for loading images.
>>    - Ethernet port wired to the internal PHY. (100M)
>>    - 2x HDMI 2.0. (Only 1 usable on CB1)
>>    - Power and Status LEDs. (Only Status LED usable on CB1)
>>    - 40 pin GPIO header
>> 
>>  Currently working:
>>    - Booting
>>    - USB
>>    - UART
>>    - MMC
>>    - Status LED
>>    - WiFi (RTL8189FS via out of tree driver)
>> 
>>  I didnt want to duplicate things so the manta DTS can also be used 
>> on BTT
>>  pi4b adapter. CB1 SoM has its own DTSI file in case other boards 
>> shows up
>>  that accept this SoM.
>> 
>>  Signed-off-by: Martin Botka <martin.botka@somainline.org>
>>  Reviewed-by: Andre Przywara <andre.przywara@arm.com>
>>  ---
>>  Changes in V2:
>>      - Fixed whitespace errors
>>      - Move UART into carrier boards and BTT Pi
>>      - Remove usb1-vbus regulator
>>      - Fix ranges and naming of AXP313A rails
>>      - Add comment specifying why broken-cd in mmc0 is needed
>>      - Rename sdio_wifi to wifi
>>      - Specify in commit description that USB-OTG doesnt work
>>  Changes in V3:
>>      - Add missed semicolons
>>      - Move model string from dtsi to board dts
>>      - Add cb1 compatible
>>      - Remove extra empty line
>>  Changed in V4:
>>      - Extend the range of vcc-dram to 1.5V (1.35V max caused issues 
>> with
>>  booting up
>> 
>>   arch/arm64/boot/dts/allwinner/Makefile        |   1 +
>>   .../sun50i-h616-bigtreetech-cb1-manta.dts     |  35 +++++
>>   .../sun50i-h616-bigtreetech-cb1.dtsi          | 140 
>> ++++++++++++++++++
>>   3 files changed, 176 insertions(+)
>>   create mode 100644
>>  arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts 
>> create
>>  mode 100644 
>> arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
>> 
>>  diff --git a/arch/arm64/boot/dts/allwinner/Makefile
>>  b/arch/arm64/boot/dts/allwinner/Makefile index 
>> 6a96494a2e0a..7b386428510b
>>  100644
>>  --- a/arch/arm64/boot/dts/allwinner/Makefile
>>  +++ b/arch/arm64/boot/dts/allwinner/Makefile
>>  @@ -38,5 +38,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
>>   dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
>>   dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
>>   dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
>>  +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
>>   dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
>>   dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
>>  diff --git
>>  
>> a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
>>  
>> b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts 
>> new
>>  file mode 100644
>>  index 000000000000..dbce61b355d6
>>  --- /dev/null
>>  +++ 
>> b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
>>  @@ -0,0 +1,35 @@
>>  +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
>>  +/*
>>  + * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
>>  + */
>>  +
>>  +/dts-v1/;
>>  +
>>  +#include "sun50i-h616-bigtreetech-cb1.dtsi"
>>  +
>>  +/ {
>>  +	model = "BigTreeTech CB1";
>>  +	compatible = "bigtreetech,cb1-manta", "bigtreetech,cb1",
>>  "allwinner,sun50i-h616"; +
>>  +	aliases {
>>  +		serial0 = &uart0;
>>  +	};
>>  +
>>  +	chosen {
>>  +		stdout-path = "serial0:115200n8";
>>  +	};
>>  +};
>>  +
>>  +&ehci1 {
>>  +	status = "okay";
>>  +};
>>  +
>>  +&ohci1 {
>>  +	status = "okay";
>>  +};
>>  +
>>  +&uart0 {
>>  +	pinctrl-names = "default";
>>  +	pinctrl-0 = <&uart0_ph_pins>;
>>  +	status = "okay";
>>  +};
>>  diff --git 
>> a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
>>  b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi 
>> new file
>>  mode 100644
>>  index 000000000000..5e756f217813
>>  --- /dev/null
>>  +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
>>  @@ -0,0 +1,140 @@
>>  +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
>>  +/*
>>  + * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
>>  + */
>>  +
>>  +/dts-v1/;
>>  +
>>  +#include "sun50i-h616.dtsi"
>>  +
>>  +#include <dt-bindings/gpio/gpio.h>
>>  +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>  +#include <dt-bindings/leds/common.h>
>>  +
>>  +/ {
>>  +	aliases {
>>  +		ethernet0 = &rtl8189ftv;
>>  +	};
>>  +
>>  +	leds {
>>  +		compatible = "gpio-leds";
>>  +
>>  +		led-0 {
>>  +			function = LED_FUNCTION_STATUS;
>>  +			color = <LED_COLOR_ID_GREEN>;
>>  +			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5
> */
>>  +		};
>>  +	};
>>  +
>>  +	reg_vcc5v: regulator-vcc5v {
>>  +		/* board wide 5V supply from carrier boards */
>>  +		compatible = "regulator-fixed";
>>  +		regulator-name = "vcc-5v";
>>  +		regulator-min-microvolt = <5000000>;
>>  +		regulator-max-microvolt = <5000000>;
>>  +		regulator-always-on;
>>  +	};
>>  +
>>  +	reg_vcc33_wifi: vcc33-wifi {
>>  +		/* Always on 3.3V regulator for WiFi */
> 
> Please drop the comment. It's pretty obvious from properties.
> 
>>  +		compatible = "regulator-fixed";
>>  +		regulator-name = "vcc33-wifi";
>>  +		regulator-min-microvolt = <3300000>;
>>  +		regulator-max-microvolt = <3300000>;
>>  +		regulator-always-on;
>>  +		vin-supply = <&reg_vcc5v>;
>>  +	};
>>  +
>>  +	reg_vcc_wifi_io: vcc-wifi-io {
>>  +		/* Always on 1.8V/300mA regulator for WiFi */
> 
> Ditto.
> 
> Once fixed, you can add:
> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> 
> Best regards,
> Jernej
Got it for both comments. Will send V5 tomorrow.

Cheers,
Martin
> 
>>  +		compatible = "regulator-fixed";
>>  +		regulator-name = "vcc-wifi-io";
>>  +		regulator-min-microvolt = <1800000>;
>>  +		regulator-max-microvolt = <1800000>;
>>  +		regulator-always-on;
>>  +		vin-supply = <&reg_vcc33_wifi>;
>>  +	};
>>  +
>>  +	wifi_pwrseq: wifi-pwrseq {
>>  +		compatible = "mmc-pwrseq-simple";
>>  +		clocks = <&rtc 1>;
>>  +		clock-names = "ext_clock";
>>  +		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
>>  +		post-power-on-delay-ms = <200>;
>>  +	};
>>  +};
>>  +
>>  +&mmc0 {
>>  +	vmmc-supply = <&reg_dldo1>;
>>  +	/* Card detection pin is not connected */
>>  +	broken-cd;
>>  +	bus-width = <4>;
>>  +	status = "okay";
>>  +};
>>  +
>>  +&mmc1 {
>>  +	vmmc-supply = <&reg_vcc33_wifi>;
>>  +	vqmmc-supply = <&reg_vcc_wifi_io>;
>>  +	mmc-pwrseq = <&wifi_pwrseq>;
>>  +	bus-width = <4>;
>>  +	non-removable;
>>  +	mmc-ddr-1_8v;
>>  +	status = "okay";
>>  +
>>  +	rtl8189ftv: wifi@1 {
>>  +		reg = <1>;
>>  +	};
>>  +};
>>  +
>>  +&r_i2c {
>>  +	status = "okay";
>>  +
>>  +	axp313a: pmic@36 {
>>  +		compatible = "x-powers,axp313a";
>>  +		reg = <0x36>;
>>  +		interrupt-controller;
>>  +		#interrupt-cells = <1>;
>>  +
>>  +		regulators{
>>  +			reg_dcdc1: dcdc1 {
>>  +				regulator-name = "vdd-gpu-sys";
>>  +				regulator-min-microvolt =
> <810000>;
>>  +				regulator-max-microvolt =
> <990000>;
>>  +				regulator-always-on;
>>  +			};
>>  +
>>  +			reg_dcdc2: dcdc2 {
>>  +				regulator-name = "vdd-cpu";
>>  +				regulator-min-microvolt =
> <810000>;
>>  +				regulator-max-microvolt =
> <1100000>;
>>  +				regulator-ramp-delay = <200>;
>>  +				regulator-always-on;
>>  +			};
>>  +
>>  +			reg_dcdc3: dcdc3 {
>>  +				regulator-name = "vcc-dram";
>>  +				regulator-min-microvolt =
> <1350000>;
>>  +				regulator-max-microvolt =
> <1500000>;
>>  +				regulator-always-on;
>>  +			};
>>  +
>>  +			reg_aldo1: aldo1 {
>>  +				regulator-name = "vcc-1v8-pll";
>>  +				regulator-min-microvolt =
> <1800000>;
>>  +				regulator-max-microvolt =
> <1800000>;
>>  +				regulator-always-on;
>>  +			};
>>  +
>>  +			reg_dldo1: dldo1 {
>>  +				regulator-name = "vcc-3v3-io";
>>  +				regulator-min-microvolt =
> <3300000>;
>>  +				regulator-max-microvolt =
> <3300000>;
>>  +				regulator-always-on;
>>  +			};
>>  +		};
>>  +	};
>>  +};
>>  +
>>  +&usbphy {
>>  +	status = "okay";
>>  +};
> 
> 
> 
>