Re: [PATCH 5/7] dt-bindings: pinctrl: add compatible for Allwinner A523/T527

[Chen-Yu Tsai <wens@csie.org>]

On Mon, Nov 11, 2024 at 8:58 AM Andre Przywara <andre.przywara@arm.com> wrote:
>
> The A523 contains a pin controller similar to previous SoCs, although
> using 10 GPIO banks (PortB-PortK), all of them being IRQ capable.
> This introduces a new style of binding, where the pinmux values for each
> pin group is stored in the new "allwinner,pinmux" property in the DT
> node, instead of requiring every driver to store a mapping between the
> function names and the required pinmux.
>
> Add the new name to the list of compatible strings, and required it to
> have 10 interrupts described. Also add the new pinmux property.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml  | 23 +++++++++++++++++--
>  1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> index 4502405703145..6fc18e92e1e94 100644
> --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> @@ -56,6 +56,8 @@ properties:
>        - allwinner,sun50i-h6-r-pinctrl
>        - allwinner,sun50i-h616-pinctrl
>        - allwinner,sun50i-h616-r-pinctrl
> +      - allwinner,sun55i-a523-pinctrl
> +      - allwinner,sun55i-a523-r-pinctrl
>        - allwinner,suniv-f1c100s-pinctrl
>        - nextthing,gr8-pinctrl
>
> @@ -64,7 +66,7 @@ properties:
>
>    interrupts:
>      minItems: 1
> -    maxItems: 8
> +    maxItems: 10
>      description:
>        One interrupt per external interrupt bank supported on the
>        controller, sorted by bank number ascending order.
> @@ -119,13 +121,17 @@ patternProperties:
>          $ref: /schemas/types.yaml#/definitions/uint32
>          enum: [10, 20, 30, 40]
>
> +      allwinner,pinmux:
> +        $ref: /schemas/types.yaml#/definitions/uint32-array
> +        description: pinmux selector for each pin
> +

Why not just the standard "pinmux" property, as given in
Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml

>      required:
>        - pins
>        - function

This section should be made to apply only to the existing
compatibles? Maybe we could just split the files and have
a clean slate for sun55i?

ChenYu

>      additionalProperties: false
>
> -  "^vcc-p[a-ilm]-supply$":
> +  "^vcc-p[a-klm]-supply$":
>      description:
>        Power supplies for pin banks.
>
> @@ -156,6 +162,17 @@ allOf:
>          - interrupts
>          - interrupt-controller
>
> +  - if:
> +      properties:
> +        compatible:
> +          enum:
> +            - allwinner,sun55i-a523-pinctrl
> +
> +    then:
> +      properties:
> +        interrupts:
> +          minItems: 10
> +
>    - if:
>        properties:
>          compatible:
> @@ -166,6 +183,7 @@ allOf:
>        properties:
>          interrupts:
>            minItems: 8
> +          maxItems: 8
>
>    - if:
>        properties:
> @@ -244,6 +262,7 @@ allOf:
>              - allwinner,sun8i-v3s-pinctrl
>              - allwinner,sun9i-a80-r-pinctrl
>              - allwinner,sun50i-h6-r-pinctrl
> +            - allwinner,sun55i-a523-r-pinctrl
>
>      then:
>        properties:
> --
> 2.46.2
>