* [PATCH] ocfs2: heartbeat: replace simple_strtoul with kstrtoul
@ 2024-11-13 8:41 Daniel Yang
2024-11-15 1:01 ` Joseph Qi
0 siblings, 1 reply; 3+ messages in thread
From: Daniel Yang @ 2024-11-13 8:41 UTC (permalink / raw)
To: Mark Fasheh, Joel Becker, Joseph Qi, GitAuthor: Daniel Yang,
open list:ORACLE CLUSTER FILESYSTEM 2 (OCFS2), open list
The function simple_strtoul is deprecated due to ignoring overflows and
also requires clunkier error checking. Replacing with kstrtoul() leads
to safer code and cleaner error checking.
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
---
fs/ocfs2/cluster/heartbeat.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index dff18efbc..4fc1b23f1 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -1537,8 +1537,9 @@ static int o2hb_read_block_input(struct o2hb_region *reg,
unsigned long bytes;
char *p = (char *)page;
- bytes = simple_strtoul(p, &p, 0);
- if (!p || (*p && (*p != '\n')))
+ int ret = kstrtoul(p, 0, &bytes);
+
+ if (ret)
return -EINVAL;
/* Heartbeat and fs min / max block sizes are the same. */
@@ -1627,8 +1628,9 @@ static ssize_t o2hb_region_blocks_store(struct config_item *item,
if (reg->hr_bdev_file)
return -EINVAL;
- tmp = simple_strtoul(p, &p, 0);
- if (!p || (*p && (*p != '\n')))
+ int ret = kstrtoul(p, 0, &tmp);
+
+ if (ret)
return -EINVAL;
if (tmp > O2NM_MAX_NODES || tmp == 0)
@@ -2142,8 +2144,9 @@ static ssize_t o2hb_heartbeat_group_dead_threshold_store(struct config_item *ite
unsigned long tmp;
char *p = (char *)page;
- tmp = simple_strtoul(p, &p, 10);
- if (!p || (*p && (*p != '\n')))
+ int ret = kstrtoul(p, 10, &tmp);
+
+ if (ret)
return -EINVAL;
/* this will validate ranges for us. */
--
2.39.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ocfs2: heartbeat: replace simple_strtoul with kstrtoul
2024-11-13 8:41 [PATCH] ocfs2: heartbeat: replace simple_strtoul with kstrtoul Daniel Yang
@ 2024-11-15 1:01 ` Joseph Qi
2024-11-15 7:53 ` Daniel Yang
0 siblings, 1 reply; 3+ messages in thread
From: Joseph Qi @ 2024-11-15 1:01 UTC (permalink / raw)
To: Daniel Yang, Mark Fasheh, Joel Becker,
open list:ORACLE CLUSTER FILESYSTEM 2 (OCFS2), open list
On 11/13/24 4:41 PM, Daniel Yang wrote:
> The function simple_strtoul is deprecated due to ignoring overflows and
> also requires clunkier error checking. Replacing with kstrtoul() leads
> to safer code and cleaner error checking.
>
> Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
> ---
> fs/ocfs2/cluster/heartbeat.c | 15 +++++++++------
> 1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
> index dff18efbc..4fc1b23f1 100644
> --- a/fs/ocfs2/cluster/heartbeat.c
> +++ b/fs/ocfs2/cluster/heartbeat.c
> @@ -1537,8 +1537,9 @@ static int o2hb_read_block_input(struct o2hb_region *reg,
> unsigned long bytes;
> char *p = (char *)page;
Please define 'ret' here to make code style consistent.
>
> - bytes = simple_strtoul(p, &p, 0);
> - if (!p || (*p && (*p != '\n')))
> + int ret = kstrtoul(p, 0, &bytes);
> +
The above blane line can be eleminated.
> + if (ret)
> return -EINVAL;
>
> /* Heartbeat and fs min / max block sizes are the same. */
> @@ -1627,8 +1628,9 @@ static ssize_t o2hb_region_blocks_store(struct config_item *item,
> if (reg->hr_bdev_file)
> return -EINVAL;
>
> - tmp = simple_strtoul(p, &p, 0);
> - if (!p || (*p && (*p != '\n')))
> + int ret = kstrtoul(p, 0, &tmp);
> +
Ditto.
> + if (ret)
> return -EINVAL;
>
> if (tmp > O2NM_MAX_NODES || tmp == 0)
> @@ -2142,8 +2144,9 @@ static ssize_t o2hb_heartbeat_group_dead_threshold_store(struct config_item *ite
> unsigned long tmp;
> char *p = (char *)page;
>
> - tmp = simple_strtoul(p, &p, 10);
> - if (!p || (*p && (*p != '\n')))
> + int ret = kstrtoul(p, 10, &tmp);
> +
Ditto.
Thanks,
Joseph
> + if (ret)
> return -EINVAL;
>
> /* this will validate ranges for us. */
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ocfs2: heartbeat: replace simple_strtoul with kstrtoul
2024-11-15 1:01 ` Joseph Qi
@ 2024-11-15 7:53 ` Daniel Yang
0 siblings, 0 replies; 3+ messages in thread
From: Daniel Yang @ 2024-11-15 7:53 UTC (permalink / raw)
To: Joseph Qi
Cc: Mark Fasheh, Joel Becker,
open list:ORACLE CLUSTER FILESYSTEM 2 (OCFS2), open list
On Thu, Nov 14, 2024 at 5:01 PM Joseph Qi <joseph.qi@linux.alibaba.com> wrote:
>
>
>
> On 11/13/24 4:41 PM, Daniel Yang wrote:
> > The function simple_strtoul is deprecated due to ignoring overflows and
> > also requires clunkier error checking. Replacing with kstrtoul() leads
> > to safer code and cleaner error checking.
> >
> > Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
> > ---
> > fs/ocfs2/cluster/heartbeat.c | 15 +++++++++------
> > 1 file changed, 9 insertions(+), 6 deletions(-)
> >
> > diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
> > index dff18efbc..4fc1b23f1 100644
> > --- a/fs/ocfs2/cluster/heartbeat.c
> > +++ b/fs/ocfs2/cluster/heartbeat.c
> > @@ -1537,8 +1537,9 @@ static int o2hb_read_block_input(struct o2hb_region *reg,
> > unsigned long bytes;
> > char *p = (char *)page;
>
> Please define 'ret' here to make code style consistent.
> >
> > - bytes = simple_strtoul(p, &p, 0);
> > - if (!p || (*p && (*p != '\n')))
> > + int ret = kstrtoul(p, 0, &bytes);
> > +
>
> The above blane line can be eleminated.
>
> > + if (ret)
> > return -EINVAL;
> >
> > /* Heartbeat and fs min / max block sizes are the same. */
> > @@ -1627,8 +1628,9 @@ static ssize_t o2hb_region_blocks_store(struct config_item *item,
> > if (reg->hr_bdev_file)
> > return -EINVAL;
> >
> > - tmp = simple_strtoul(p, &p, 0);
> > - if (!p || (*p && (*p != '\n')))
> > + int ret = kstrtoul(p, 0, &tmp);
> > +
>
> Ditto.
>
> > + if (ret)
> > return -EINVAL;
> >
> > if (tmp > O2NM_MAX_NODES || tmp == 0)
> > @@ -2142,8 +2144,9 @@ static ssize_t o2hb_heartbeat_group_dead_threshold_store(struct config_item *ite
> > unsigned long tmp;
> > char *p = (char *)page;
> >
> > - tmp = simple_strtoul(p, &p, 10);
> > - if (!p || (*p && (*p != '\n')))
> > + int ret = kstrtoul(p, 10, &tmp);
> > +
>
> Ditto.
>
> Thanks,
> Joseph
> > + if (ret)
> > return -EINVAL;
> >
> > /* this will validate ranges for us. */
>
Ok sounds good. I moved ret to the beginning of each function and
removed the empty line after each ret = kstrtoul() statement. I just
sent a v2 of this patch. Let me know if there's any other issues.
- Daniel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-11-15 7:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-11-13 8:41 [PATCH] ocfs2: heartbeat: replace simple_strtoul with kstrtoul Daniel Yang
2024-11-15 1:01 ` Joseph Qi
2024-11-15 7:53 ` Daniel Yang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox