From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Andreas Noever <andreas.noever@gmail.com>,
Michael Jamet <michael.jamet@intel.com>,
Yehezkel Bernat <yehezkel.bernat@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Mario Limonciello <Mario.Limonciello@dell.com>,
Radion Mirchevsky <radion.mirchevsky@intel.com>
Subject: Re: [PATCH 18/18] thunderbolt: Add support for Intel Titan Ridge
Date: Wed, 14 Feb 2018 16:23:44 +0200 [thread overview]
Message-ID: <CAHp75VcwWDTFnBcLotrABvWhT7a=-Z-vue8nB6hko1BaSqKQPQ@mail.gmail.com> (raw)
In-Reply-To: <20180213170018.9780-19-mika.westerberg@linux.intel.com>
On Tue, Feb 13, 2018 at 7:00 PM, Mika Westerberg
<mika.westerberg@linux.intel.com> wrote:
> Intel Titan Ridge is the next Thunderbolt 3 controller. The ICM firmware
> message format in Titan Ridge differs from Falcon Ridge and Alpine Ridge
> somewhat because it is using route strings addressing devices. In
> addition to that the DMA port of 4-channel (two port) controller is in
> different port number than the previous controllers. There are some
> other minor differences as well.
>
> This patch add support for Intel Titan Ridge and the new ICM firmware
> message format.
> static int dma_find_port(struct tb_switch *sw)
> {
> + static const int ports[] = { 7, 5, 3 };
Is it anything special in ordering? Otherwise I would keep it the same
as in comment below.
> + int i;
>
> /*
> + * The DMA (NHI) port is either 3, 5 or 7 depending on the
> + * controller. Try all of them.
> */
> + for (i = 0; i < ARRAY_SIZE(ports); i++) {
> + u32 type;
> + int ret;
> +
> + ret = dma_port_read(sw->tb->ctl, &type, tb_route(sw), ports[i],
> + 2, 1, DMA_PORT_TIMEOUT);
> + if (!ret && (type & 0xffffff) == TB_TYPE_NHI)
> + return ports[i];
> + }
> +static inline u64 get_parent_route(u64 route)
> +{
> + int depth = tb_route_length(route);
> + return depth ? route & ~((u64)0xff << (depth - 1) * TB_ROUTE_SHIFT) : 0;
0xffULL ?
> +}
> + const struct icm_tr_event_device_connected *pkg =
> + (const struct icm_tr_event_device_connected *)hdr;
> + const struct icm_tr_event_device_disconnected *pkg =
> + (const struct icm_tr_event_device_disconnected *)hdr;
> + const struct icm_tr_event_xdomain_connected *pkg =
> + (const struct icm_tr_event_xdomain_connected *)hdr;
> + const struct icm_tr_event_xdomain_disconnected *pkg =
> + (const struct icm_tr_event_xdomain_disconnected *)hdr;
> #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_USBONLY_NHI 0x15dc
> #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_USBONLY_NHI 0x15dd
> #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_USBONLY_NHI 0x15de
> +#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_NHI 0x15e8
> +#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_BRIDGE 0x15e7
> +#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_NHI 0x15eb
> +#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_BRIDGE 0x15ea
> +#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE 0x15ef
Can we keep it sorted?
> +#define ICM_TR_INFO_SLEVEL_MASK 0x7
GENMASK() ?
> +#define ICM_TR_INFO_BOOT_ACL_SHIFT 7
> +#define ICM_TR_INFO_BOOT_ACL_MASK GENMASK(12, 7)
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2018-02-14 14:23 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-13 17:00 [PATCH 00/18] thunderbolt: Add support for Intel Titan Ridge Mika Westerberg
2018-02-13 17:00 ` [PATCH 01/18] thunderbolt: Resume control channel after hibernation image is created Mika Westerberg
2018-02-13 17:00 ` [PATCH 02/18] thunderbolt: Serialize PCIe tunnel creation with PCI rescan Mika Westerberg
2018-02-13 17:00 ` [PATCH 03/18] thunderbolt: Handle connecting device in place of host properly Mika Westerberg
2018-02-13 17:00 ` [PATCH 04/18] thunderbolt: Do not overwrite error code when domain adding fails Mika Westerberg
2018-02-13 17:00 ` [PATCH 05/18] thunderbolt: Wait a bit longer for root switch config space Mika Westerberg
2018-02-13 17:00 ` [PATCH 06/18] thunderbolt: Wait a bit longer for ICM to authenticate the active NVM Mika Westerberg
2018-02-13 17:21 ` Mario.Limonciello
2018-02-14 10:03 ` Mika Westerberg
2018-02-13 17:00 ` [PATCH 07/18] thunderbolt: Handle rejected Thunderbolt devices Mika Westerberg
2018-02-22 23:17 ` [07/18] " Jeremy McNicoll
2018-02-26 10:20 ` Mika Westerberg
2018-02-26 13:38 ` Mika Westerberg
2018-02-26 19:28 ` Jeremy McNicoll
2018-02-26 19:46 ` Mika Westerberg
2018-02-26 20:15 ` Jeremy McNicoll
2018-02-27 9:26 ` Mika Westerberg
2018-02-27 22:27 ` Jeremy McNicoll
2018-02-13 17:00 ` [PATCH 08/18] thunderbolt: Factor common ICM add and update operations out Mika Westerberg
2018-02-13 17:00 ` [PATCH 09/18] thunderbolt: Correct function name in kernel-doc comment Mika Westerberg
2018-02-13 17:00 ` [PATCH 10/18] thunderbolt: Add tb_switch_get() Mika Westerberg
2018-02-13 17:00 ` [PATCH 11/18] thunderbolt: Add tb_switch_find_by_route() Mika Westerberg
2018-02-13 17:00 ` [PATCH 12/18] thunderbolt: Add tb_xdomain_find_by_route() Mika Westerberg
2018-02-13 17:51 ` Andy Shevchenko
2018-02-14 10:25 ` Mika Westerberg
2018-02-13 17:00 ` [PATCH 13/18] thunderbolt: Add constant for approval timeout Mika Westerberg
2018-02-13 17:00 ` [PATCH 14/18] thunderbolt: Move driver ready handling to struct icm Mika Westerberg
2018-02-13 17:00 ` [PATCH 15/18] thunderbolt: Add 'boot' attribute for devices Mika Westerberg
2018-02-13 17:00 ` [PATCH 16/18] thunderbolt: Add support for preboot ACL Mika Westerberg
2018-02-13 18:19 ` Andy Shevchenko
2018-02-14 10:22 ` Mika Westerberg
2018-02-13 17:00 ` [PATCH 17/18] thunderbolt: Introduce USB only (SL4) security level Mika Westerberg
2018-02-14 0:29 ` Randy Dunlap
2018-02-14 10:09 ` Mika Westerberg
2018-02-13 17:00 ` [PATCH 18/18] thunderbolt: Add support for Intel Titan Ridge Mika Westerberg
2018-02-14 14:23 ` Andy Shevchenko [this message]
2018-02-14 14:28 ` Mika Westerberg
2018-02-14 14:29 ` Andy Shevchenko
2018-02-14 15:52 ` Mika Westerberg
2018-02-14 13:58 ` [PATCH 00/18] " Andy Shevchenko
2018-02-14 16:43 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAHp75VcwWDTFnBcLotrABvWhT7a=-Z-vue8nB6hko1BaSqKQPQ@mail.gmail.com' \
--to=andy.shevchenko@gmail.com \
--cc=Mario.Limonciello@dell.com \
--cc=andreas.noever@gmail.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.jamet@intel.com \
--cc=mika.westerberg@linux.intel.com \
--cc=radion.mirchevsky@intel.com \
--cc=yehezkel.bernat@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).