Re: [PATCH 2/2] iio: si7005: add support for Hoperf th02

[Matt Ranostay <mranostay@gmail.com>]

On Tue, Jan 26, 2016 at 12:21 PM, Cristina Moraru
<cristina.moraru09@gmail.com> wrote:
> This patch adds support for Hoperf th02 humidity and
> temperature sensor as it uses same register definitions
> as si7005
>
> th02 Datasheet: http://www.anglia-live.com/netalogue/pdfs/hrf/datasheets/TH02_V1.1.pdf
>
> Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
> ---
>  drivers/iio/humidity/Kconfig  | 3 ++-
>  drivers/iio/humidity/si7005.c | 1 +
>  2 files changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
> index c1f3a21..866dda1 100644
> --- a/drivers/iio/humidity/Kconfig
> +++ b/drivers/iio/humidity/Kconfig
> @@ -43,7 +43,8 @@ config SI7005
>           humidity and temperature sensor.
>
>           To compile this driver as a module, choose M here: the module
> -         will be called si7005.
> +         will be called si7005. This driver also
> +         supports Hoperf TH02 Humidity and Temperature Sensor.

This probably shouldn't be changing the Kconfig description. Since if
every driver added a line for each device/variant it supported
everything would get quite wordy.

>
>  config SI7020
>         tristate "Si7013/20/21 Relative Humidity and Temperature Sensors"
> diff --git a/drivers/iio/humidity/si7005.c b/drivers/iio/humidity/si7005.c
> index 91972cc..98a022f 100644
> --- a/drivers/iio/humidity/si7005.c
> +++ b/drivers/iio/humidity/si7005.c
> @@ -170,6 +170,7 @@ static int si7005_probe(struct i2c_client *client,
>
>  static const struct i2c_device_id si7005_id[] = {
>         { "si7005", 0 },
> +       { "th02", 0 },
>         { }
>  };
>  MODULE_DEVICE_TABLE(i2c, si7005_id);
> --
> 1.9.1
>