[PATCH v9 18/37] drivers/cpu: Add generic armv8 cpu driver

[PATCH v9 18/37] drivers/cpu: Add generic armv8 cpu driver

[Patrick Rudolph]

Add a generic driver that binds to armv8 CPU nodes. The generic driver allows
- to enumerate CPUs present in a system, even when no other driver binds it
- generates ACPI SSDT code for each CPU
- Fill the ACPI MADT table (implemented in a follow up patch)

The newly introduced code could also be reused on other CPU drivers that are
compatible with armv8.

TEST: Booted on QEMU sbsa and verify the driver binds to CPU nodes.
      Confirmed with FWTS that all ACPI processor devices are present.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
---
Changelog v4:
- Export armv8_cpu_fill_ssdt to use it in other CPU drivers
Changelog v6:
- Update header order
---
 drivers/cpu/Kconfig     |  6 ++++
 drivers/cpu/Makefile    |  2 ++
 drivers/cpu/armv8_cpu.c | 73 +++++++++++++++++++++++++++++++++++++++++
 drivers/cpu/armv8_cpu.h | 21 ++++++++++++
 4 files changed, 102 insertions(+)
 create mode 100644 drivers/cpu/armv8_cpu.c
 create mode 100644 drivers/cpu/armv8_cpu.h

diff --git a/drivers/cpu/Kconfig b/drivers/cpu/Kconfig
index 5c06cd9f60..9c0df331d7 100644
--- a/drivers/cpu/Kconfig
+++ b/drivers/cpu/Kconfig
@@ -26,6 +26,12 @@ config CPU_RISCV
 	help
 	  Support CPU cores for RISC-V architecture.
 
+config CPU_ARMV8
+	bool "Enable generic ARMv8 CPU driver"
+	depends on CPU && ARM64
+	help
+	  Support CPU cores for armv8 architecture.
+
 config CPU_MICROBLAZE
 	bool "Enable Microblaze CPU driver"
 	depends on CPU && MICROBLAZE
diff --git a/drivers/cpu/Makefile b/drivers/cpu/Makefile
index bc75d9b974..773395693a 100644
--- a/drivers/cpu/Makefile
+++ b/drivers/cpu/Makefile
@@ -6,10 +6,12 @@
 
 obj-$(CONFIG_CPU) += cpu-uclass.o
 
+
 obj-$(CONFIG_ARCH_BMIPS) += bmips_cpu.o
 obj-$(CONFIG_ARCH_IMX8) += imx8_cpu.o
 obj-$(CONFIG_ARCH_AT91) += at91_cpu.o
 obj-$(CONFIG_ARCH_MEDIATEK) += mtk_cpu.o
+obj-$(CONFIG_CPU_ARMV8) += armv8_cpu.o
 obj-$(CONFIG_CPU_IMX) += imx8_cpu.o
 obj-$(CONFIG_CPU_MPC83XX) += mpc83xx_cpu.o
 obj-$(CONFIG_CPU_RISCV) += riscv_cpu.o
diff --git a/drivers/cpu/armv8_cpu.c b/drivers/cpu/armv8_cpu.c
new file mode 100644
index 0000000000..19f072be43
--- /dev/null
+++ b/drivers/cpu/armv8_cpu.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 9elements GmbH
+ */
+#include <cpu.h>
+#include <dm.h>
+#include <acpi/acpigen.h>
+#include <asm/armv8/cpu.h>
+#include <dm/acpi.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <linux/printk.h>
+#include <linux/sizes.h>
+
+static int armv8_cpu_get_desc(const struct udevice *dev, char *buf, int size)
+{
+	int cpuid;
+
+	cpuid = (read_midr() & MIDR_PARTNUM_MASK) >> MIDR_PARTNUM_SHIFT;
+
+	snprintf(buf, size, "CPU MIDR %04x", cpuid);
+
+	return 0;
+}
+
+static int armv8_cpu_get_info(const struct udevice *dev,
+			      struct cpu_info *info)
+{
+	info->cpu_freq = 0;
+	info->features = BIT(CPU_FEAT_L1_CACHE) | BIT(CPU_FEAT_MMU);
+
+	return 0;
+}
+
+static int armv8_cpu_get_count(const struct udevice *dev)
+{
+	return uclass_id_count(UCLASS_CPU);
+}
+
+#ifdef CONFIG_ACPIGEN
+int armv8_cpu_fill_ssdt(const struct udevice *dev, struct acpi_ctx *ctx)
+{
+	uint core_id = dev_seq(dev);
+
+	acpigen_write_processor_device(ctx, core_id);
+
+	return 0;
+}
+
+struct acpi_ops armv8_cpu_acpi_ops = {
+	.fill_ssdt	= armv8_cpu_fill_ssdt,
+};
+#endif
+
+static const struct cpu_ops cpu_ops = {
+	.get_count = armv8_cpu_get_count,
+	.get_desc  = armv8_cpu_get_desc,
+	.get_info  = armv8_cpu_get_info,
+};
+
+static const struct udevice_id cpu_ids[] = {
+	{ .compatible = "arm,armv8" },
+	{}
+};
+
+U_BOOT_DRIVER(arm_cpu) = {
+	.name		= "arm-cpu",
+	.id		= UCLASS_CPU,
+	.of_match	= cpu_ids,
+	.ops		= &cpu_ops,
+	.flags		= DM_FLAG_PRE_RELOC,
+	ACPI_OPS_PTR(&armv8_cpu_acpi_ops)
+};
diff --git a/drivers/cpu/armv8_cpu.h b/drivers/cpu/armv8_cpu.h
new file mode 100644
index 0000000000..2c4b0252cf
--- /dev/null
+++ b/drivers/cpu/armv8_cpu.h
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 9elements GmbH
+ */
+#include <dm/acpi.h>
+#include <dm/device.h>
+
+#ifndef _ARMV8_CPU_H_
+#define _ARMV8_CPU_H_
+
+/**
+ * armv8_cpu_fill_ssdt() - Fill the SSDT
+ * Parses the FDT and writes the SSDT nodes.
+ *
+ * @dev: cpu device to generate ACPI tables for
+ * @ctx: ACPI context pointer
+ * @return:	0 if OK, or a negative error code.
+ */
+int armv8_cpu_fill_ssdt(const struct udevice *dev, struct acpi_ctx *ctx);
+
+#endif
\ No newline at end of file
-- 
2.46.2

[PATCH v9 19/37] arm: gic-v3-its: Rename objects

[Patrick Rudolph]

The code accesses the gic-v3 node, but not the gic-v3-its node,
thus rename the objects to clarify which node it operates on.

The following commit will make use of the gic-v3-its node for real.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 arch/arm/lib/gic-v3-its.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/lib/gic-v3-its.c b/arch/arm/lib/gic-v3-its.c
index 2cc0a32f9d..22fa46a341 100644
--- a/arch/arm/lib/gic-v3-its.c
+++ b/arch/arm/lib/gic-v3-its.c
@@ -35,10 +35,10 @@ static int gic_v3_its_get_gic_addr(struct gic_v3_its_priv *priv)
 	int ret;
 
 	ret = uclass_get_device_by_driver(UCLASS_IRQ,
-					  DM_DRIVER_GET(arm_gic_v3_its), &dev);
+					  DM_DRIVER_GET(arm_gic_v3), &dev);
 	if (ret) {
 		pr_err("%s: failed to get %s irq device\n", __func__,
-		       DM_DRIVER_GET(arm_gic_v3_its)->name);
+		       DM_DRIVER_GET(arm_gic_v3)->name);
 		return ret;
 	}
 
@@ -158,13 +158,13 @@ int gic_lpi_tables_init(u64 base, u32 num_redist)
 	return 0;
 }
 
-static const struct udevice_id gic_v3_its_ids[] = {
+static const struct udevice_id gic_v3_ids[] = {
 	{ .compatible = "arm,gic-v3" },
 	{}
 };
 
-U_BOOT_DRIVER(arm_gic_v3_its) = {
+U_BOOT_DRIVER(arm_gic_v3) = {
 	.name		= "gic-v3",
 	.id		= UCLASS_IRQ,
-	.of_match	= gic_v3_its_ids,
+	.of_match	= gic_v3_ids,
 };
-- 
2.46.2

[PATCH v9 20/37] arm: gic-v3-its: Implement of_xlate

[Patrick Rudolph]

Translate IRQs by implementing of_xlate() as required by
irq_get_by_index() to parse interrupt properties.

Map DT interrupts to ARM GIC interrupts as follows:

- Interrupt numbers ID32-ID1019 are used for SPIs
- ID0-ID15 are used for SGIs
- ID16-ID31 are used for PPIs

TEST: Booted on qemu sbsa-ref that has a GICV3.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
---
Changelog v9:
- Require at least 3 interrupt-cells
- Map SPI interrupts to ID32+
- Map PPI interrupts to ID16+
---
 arch/arm/lib/gic-v3-its.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/lib/gic-v3-its.c b/arch/arm/lib/gic-v3-its.c
index 22fa46a341..58f8bf864f 100644
--- a/arch/arm/lib/gic-v3-its.c
+++ b/arch/arm/lib/gic-v3-its.c
@@ -4,9 +4,11 @@
  */
 #include <cpu_func.h>
 #include <dm.h>
+#include <irq.h>
 #include <asm/gic.h>
 #include <asm/gic-v3.h>
 #include <asm/io.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <linux/bitops.h>
 #include <linux/printk.h>
 #include <linux/sizes.h>
@@ -163,8 +165,30 @@ static const struct udevice_id gic_v3_ids[] = {
 	{}
 };
 
+static int arm_gic_v3_of_xlate(struct irq *irq, struct ofnode_phandle_args *args)
+{
+	if (args->args_count < 3) {
+		log_debug("Invalid args_count: %d\n", args->args_count);
+		return -EINVAL;
+	}
+
+	if (args->args[0] == GIC_SPI)
+		irq->id = args->args[1] + 32;
+	else
+		irq->id = args->args[1] + 16;
+
+	irq->flags = args->args[2];
+
+	return 0;
+}
+
+static const struct irq_ops arm_gic_v3_ops = {
+	.of_xlate		=  arm_gic_v3_of_xlate,
+};
+
 U_BOOT_DRIVER(arm_gic_v3) = {
 	.name		= "gic-v3",
 	.id		= UCLASS_IRQ,
 	.of_match	= gic_v3_ids,
+	.ops		= &arm_gic_v3_ops,
 };
-- 
2.46.2

[PATCH v9 23/37] drivers/arm: Implement acpi_fill_madt

[Patrick Rudolph]

Fill the MADT table in the GIC driver and armv8 CPU driver to
drop SoC specific code. While the GIC only needs devicetree
data, the CPU driver needs additional information stored in
the cpu_plat struct.

While on it update the only board making use of the existing
drivers and writing ACPI MADT in mainboard code.

TEST: Booted on QEMU sbsa-ref using GICV3 driver model generated MADT.
      Booted on QEMU raspb4 using GICV2 driver model generated MADT.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
---
Changelog v4:
- Read everything from the DT
- Export armv8_cpu_fill_madt() to use it in other CPU drivers
- Depend on IRQ
Changelog v6:
- Update header order
---
 arch/arm/lib/gic-v3-its.c | 89 ++++++++++++++++++++++++++++++++++++++-
 drivers/cpu/Kconfig       |  1 +
 drivers/cpu/armv8_cpu.c   | 80 ++++++++++++++++++++++++++++++++++-
 drivers/cpu/armv8_cpu.h   | 10 +++++
 4 files changed, 178 insertions(+), 2 deletions(-)

diff --git a/arch/arm/lib/gic-v3-its.c b/arch/arm/lib/gic-v3-its.c
index 58f8bf864f..51cc239776 100644
--- a/arch/arm/lib/gic-v3-its.c
+++ b/arch/arm/lib/gic-v3-its.c
@@ -5,9 +5,11 @@
 #include <cpu_func.h>
 #include <dm.h>
 #include <irq.h>
+#include <asm/acpi_table.h>
 #include <asm/gic.h>
 #include <asm/gic-v3.h>
 #include <asm/io.h>
+#include <dm/acpi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <linux/bitops.h>
 #include <linux/printk.h>
@@ -28,12 +30,14 @@ static u32 lpi_id_bits;
 struct gic_v3_its_priv {
 	ulong gicd_base;
 	ulong gicr_base;
+	ulong gicr_length;
 };
 
 static int gic_v3_its_get_gic_addr(struct gic_v3_its_priv *priv)
 {
 	struct udevice *dev;
 	fdt_addr_t addr;
+	fdt_size_t size;
 	int ret;
 
 	ret = uclass_get_device_by_driver(UCLASS_IRQ,
@@ -51,12 +55,13 @@ static int gic_v3_its_get_gic_addr(struct gic_v3_its_priv *priv)
 	}
 	priv->gicd_base = addr;
 
-	addr = dev_read_addr_index(dev, 1);
+	addr = dev_read_addr_size_index(dev, 1, &size);
 	if (addr == FDT_ADDR_T_NONE) {
 		pr_err("%s: failed to get GICR address\n", __func__);
 		return -EINVAL;
 	}
 	priv->gicr_base = addr;
+	priv->gicr_length = size;
 
 	return 0;
 }
@@ -160,6 +165,42 @@ int gic_lpi_tables_init(u64 base, u32 num_redist)
 	return 0;
 }
 
+#ifdef CONFIG_ACPIGEN
+/**
+ * acpi_gicv3_fill_madt() - Fill out the body of the MADT
+ *
+ * Write GICD and GICR tables based on collected devicetree data.
+ *
+ * @dev: Device to write ACPI tables for
+ * @ctx: ACPI context to write MADT sub-tables to
+ * Return: 0 if OK
+ */
+static int acpi_gicv3_fill_madt(const struct udevice *dev, struct acpi_ctx *ctx)
+{
+	struct acpi_madt_gicd *gicd;
+	struct acpi_madt_gicr *gicr;
+
+	struct gic_v3_its_priv priv;
+
+	if (gic_v3_its_get_gic_addr(&priv))
+		return -EINVAL;
+
+	gicd = ctx->current;
+	acpi_write_madt_gicd(gicd, dev_seq(dev), priv.gicd_base, 3);
+	acpi_inc(ctx, gicd->length);
+
+	gicr = ctx->current;
+	acpi_write_madt_gicr(gicr, priv.gicr_base, priv.gicr_length);
+	acpi_inc(ctx, gicr->length);
+
+	return 0;
+}
+
+struct acpi_ops gic_v3_acpi_ops = {
+	.fill_madt	= acpi_gicv3_fill_madt,
+};
+#endif
+
 static const struct udevice_id gic_v3_ids[] = {
 	{ .compatible = "arm,gic-v3" },
 	{}
@@ -191,4 +232,50 @@ U_BOOT_DRIVER(arm_gic_v3) = {
 	.id		= UCLASS_IRQ,
 	.of_match	= gic_v3_ids,
 	.ops		= &arm_gic_v3_ops,
+	ACPI_OPS_PTR(&gic_v3_acpi_ops)
+};
+
+#ifdef CONFIG_ACPIGEN
+/**
+ * acpi_gic_its_fill_madt() - Fill out the body of the MADT
+ *
+ * Write ITS tables based on collected devicetree data.
+ *
+ * @dev: Device to write ACPI tables for
+ * @ctx: ACPI context to write MADT sub-tables to
+ * Return: 0 if OK
+ */
+static int acpi_gic_its_fill_madt(const struct udevice *dev, struct acpi_ctx *ctx)
+{
+	struct acpi_madt_its *its;
+	fdt_addr_t addr;
+
+	addr = dev_read_addr_index(dev, 0);
+	if (addr == FDT_ADDR_T_NONE) {
+		pr_err("%s: failed to get GIC ITS address\n", __func__);
+		return -EINVAL;
+	}
+
+	its = ctx->current;
+	acpi_write_madt_its(its, dev_seq(dev), addr);
+	acpi_inc(ctx, its->length);
+
+	return 0;
+}
+
+struct acpi_ops gic_v3_its_acpi_ops = {
+	.fill_madt	= acpi_gic_its_fill_madt,
+};
+#endif
+
+static const struct udevice_id gic_v3_its_ids[] = {
+	{ .compatible = "arm,gic-v3-its" },
+	{}
+};
+
+U_BOOT_DRIVER(arm_gic_v3_its) = {
+	.name		= "gic-v3-its",
+	.id		= UCLASS_IRQ,
+	.of_match	= gic_v3_its_ids,
+	ACPI_OPS_PTR(&gic_v3_its_acpi_ops)
 };
diff --git a/drivers/cpu/Kconfig b/drivers/cpu/Kconfig
index 9c0df331d7..4cc3679c00 100644
--- a/drivers/cpu/Kconfig
+++ b/drivers/cpu/Kconfig
@@ -29,6 +29,7 @@ config CPU_RISCV
 config CPU_ARMV8
 	bool "Enable generic ARMv8 CPU driver"
 	depends on CPU && ARM64
+	select IRQ
 	help
 	  Support CPU cores for armv8 architecture.
 
diff --git a/drivers/cpu/armv8_cpu.c b/drivers/cpu/armv8_cpu.c
index 19f072be43..4eedfe5e2c 100644
--- a/drivers/cpu/armv8_cpu.c
+++ b/drivers/cpu/armv8_cpu.c
@@ -4,10 +4,11 @@
  */
 #include <cpu.h>
 #include <dm.h>
+#include <irq.h>
 #include <acpi/acpigen.h>
 #include <asm/armv8/cpu.h>
-#include <dm/acpi.h>
 #include <asm/io.h>
+#include <dm/acpi.h>
 #include <linux/bitops.h>
 #include <linux/printk.h>
 #include <linux/sizes.h>
@@ -47,8 +48,85 @@ int armv8_cpu_fill_ssdt(const struct udevice *dev, struct acpi_ctx *ctx)
 	return 0;
 }
 
+int armv8_cpu_fill_madt(const struct udevice *dev, struct acpi_ctx *ctx)
+{
+	struct acpi_madt_gicc *gicc;
+	struct cpu_plat *cpu_plat;
+	struct udevice *gic;
+	u64 gicc_gicv = 0;
+	u64 gicc_gich = 0;
+	u64 gicc_gicr_base = 0;
+	u64 gicc_phys_base = 0;
+	u32 gicc_perf_gsiv = 0;
+	u64 gicc_mpidr;
+	u32 gicc_vgic_maint_irq = 0;
+	int addr_index;
+	fdt_addr_t addr;
+	int ret;
+	struct irq req_irq;
+
+	cpu_plat = dev_get_parent_plat(dev);
+	if (!cpu_plat)
+		return 0;
+
+	ret = irq_get_interrupt_parent(dev, &gic);
+	if (ret) {
+		log_err("%s: Failed to find interrupt parent for %s\n",
+			__func__, dev->name);
+		return -ENODEV;
+	}
+
+	addr_index = 1;
+
+	if (device_is_compatible(gic, "arm,gic-v3")) {
+		addr = dev_read_addr_index(gic, addr_index++);
+		if (addr != FDT_ADDR_T_NONE)
+			gicc_gicr_base = addr;
+	}
+
+	addr = dev_read_addr_index(gic, addr_index++);
+	if (addr != FDT_ADDR_T_NONE)
+		gicc_phys_base = addr;
+
+	addr = dev_read_addr_index(gic, addr_index++);
+	if (addr != FDT_ADDR_T_NONE)
+		gicc_gich = addr;
+
+	addr = dev_read_addr_index(gic, addr_index++);
+	if (addr != FDT_ADDR_T_NONE)
+		gicc_gicv = addr;
+
+	ret = irq_get_by_index(gic, 0, &req_irq);
+	if (!ret)
+		gicc_vgic_maint_irq = req_irq.id;
+
+	gicc_mpidr = dev_read_u64_default(dev, "reg", 0);
+	if (!gicc_mpidr)
+		gicc_mpidr = dev_read_u32_default(dev, "reg", 0);
+
+	/*
+	 * gicc_vgic_maint_irq and gicc_gicv are the same for every CPU
+	 */
+	gicc = ctx->current;
+	acpi_write_madt_gicc(gicc,
+			     dev_seq(dev),
+			     gicc_perf_gsiv, /* FIXME: needs a PMU driver */
+			     gicc_phys_base,
+			     gicc_gicv,
+			     gicc_gich,
+			     gicc_vgic_maint_irq,
+			     gicc_gicr_base,
+			     gicc_mpidr,
+			     0); /* FIXME: Not defined in DT */
+
+	acpi_inc(ctx, gicc->length);
+
+	return 0;
+}
+
 struct acpi_ops armv8_cpu_acpi_ops = {
 	.fill_ssdt	= armv8_cpu_fill_ssdt,
+	.fill_madt	= armv8_cpu_fill_madt,
 };
 #endif
 
diff --git a/drivers/cpu/armv8_cpu.h b/drivers/cpu/armv8_cpu.h
index 2c4b0252cf..48c705e98d 100644
--- a/drivers/cpu/armv8_cpu.h
+++ b/drivers/cpu/armv8_cpu.h
@@ -18,4 +18,14 @@
  */
 int armv8_cpu_fill_ssdt(const struct udevice *dev, struct acpi_ctx *ctx);
 
+/**
+ * armv8_cpu_fill_madt() - Fill the MADT
+ * Parses the FDT and writes the MADT subtables.
+ *
+ * @dev: cpu device to generate ACPI tables for
+ * @ctx: ACPI context pointer
+ * @return:	0 if OK, or a negative error code.
+ */
+int armv8_cpu_fill_madt(const struct udevice *dev, struct acpi_ctx *ctx);
+
 #endif
\ No newline at end of file
-- 
2.46.2

[PATCH v9 24/37] common: Enable BLOBLIST_TABLES on arm

[Patrick Rudolph]

Allow to use BLOBLIST_TABLES on arm to store ACPI or other tables.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Cc: Tom Rini <trini@konsulko.com>
---
Changelog v9:
- default to BLOBLIST_ALLOC on arm
- Move default for BLOBLIST_SIZE_RELOC up
---
 common/Kconfig |  2 ++
 lib/Kconfig    | 15 +++++++++------
 2 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/common/Kconfig b/common/Kconfig
index 957de0c5c0..9ceca8a2f5 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1035,6 +1035,7 @@ if BLOBLIST
 
 choice
 	prompt "Bloblist location"
+	default BLOBLIST_ALLOC if ARM
 	help
 	  Select the location of the bloblist, via various means.
 
@@ -1075,6 +1076,7 @@ config BLOBLIST_SIZE
 
 config BLOBLIST_SIZE_RELOC
 	hex "Size of bloblist after relocation"
+	default 0x20000 if (ARM && EFI_LOADER && GENERATE_ACPI_TABLE)
 	default BLOBLIST_SIZE if BLOBLIST_FIXED || BLOBLIST_ALLOC
 	default 0x0 if BLOBLIST_PASSAGE
 	help
diff --git a/lib/Kconfig b/lib/Kconfig
index 1dd4f27159..2e0fc1bc8f 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -984,12 +984,15 @@ menu "System tables"
 
 config BLOBLIST_TABLES
 	bool "Put tables in a bloblist"
-	depends on X86 && BLOBLIST
-	help
-	  Normally tables are placed at address 0xf0000 and can be up to 64KB
-	  long. With this option, tables are instead placed in the bloblist
-	  with a pointer from 0xf0000. The size can then be larger and the
-	  tables can be placed high in memory.
+	depends on BLOBLIST
+	default y if (ARM && EFI_LOADER && GENERATE_ACPI_TABLE)
+	default n
+	help
+	  On x86 normally tables are placed at address 0xf0000 and can be up
+	  to 64KB long. With this option, tables are instead placed in the
+	  bloblist with a pointer from 0xf0000. The size can then be larger
+	  and the tables can be placed high in memory.
+	  On other architectures the tables are always placed in high memory.
 
 config GENERATE_SMBIOS_TABLE
 	bool "Generate an SMBIOS (System Management BIOS) table"
-- 
2.46.2

[PATCH v9 27/37] arm: mach-bcm283x: Bring in some header files from tianocore

[Patrick Rudolph]

From: Simon Glass <sjg@chromium.org>

These header files presumably duplicate things already in the U-Boot
devicetree. For now, bring them in to get the ASL code and ACPI table
code to compile.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Matthias Brugger <mbrugger@suse.com>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
---
 .../mach-bcm283x/include/mach/acpi/bcm2711.h  | 152 ++++++++++++++++++
 .../mach-bcm283x/include/mach/acpi/bcm2836.h  | 127 +++++++++++++++
 .../include/mach/acpi/bcm2836_gpio.h          |  19 +++
 .../include/mach/acpi/bcm2836_gpu.h           |  47 ++++++
 .../include/mach/acpi/bcm2836_pwm.h           |  33 ++++
 .../include/mach/acpi/bcm2836_sdhost.h        |  18 +++
 .../include/mach/acpi/bcm2836_sdio.h          |  21 +++
 drivers/pci/pcie_brcmstb.c                    | 101 ++----------
 8 files changed, 427 insertions(+), 91 deletions(-)
 create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2711.h
 create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836.h
 create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpio.h
 create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpu.h
 create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_pwm.h
 create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdhost.h
 create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdio.h

diff --git a/arch/arm/mach-bcm283x/include/mach/acpi/bcm2711.h b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2711.h
new file mode 100644
index 0000000000..a86875b183
--- /dev/null
+++ b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2711.h
@@ -0,0 +1,152 @@
+/* SPDX-License-Identifier: BSD-2-Clause-Patent */
+/**
+ *
+ *  Copyright (c) 2019, Jeremy Linton
+ *  Copyright (c) 2019, Pete Batard <pete@akeo.ie>.
+ *
+ **/
+
+#ifndef BCM2711_H__
+#define BCM2711_H__
+
+#define BCM2711_SOC_REGISTERS              0xfc000000
+#define BCM2711_SOC_REGISTER_LENGTH        0x02000000
+
+#define BCM2711_ARM_LOCAL_REGISTERS        0xfe000000
+#define BCM2711_ARM_LOCAL_REGISTER_LENGTH  0x02000000
+
+/* arm local addresses */
+#define BCM2711_ARMC_OFFSET                0x0000b000
+#define BCM2711_ARMC_BASE_ADDRESS          (BCM2711_ARM_LOCAL_REGISTERS + BCM2711_ARMC_OFFSET)
+#define BCM2711_ARMC_LENGTH                0x00000400
+
+#define BCM2711_ARM_LOCAL_OFFSET           0x01800000
+#define BCM2711_ARM_LOCAL_BASE_ADDRESS     (BCM2711_ARM_LOCAL_REGISTERS + BCM2711_ARM_LOCAL_OFFSET)
+#define BCM2711_ARM_LOCAL_LENGTH           0x00000080
+
+#define BCM2711_GIC400_OFFSET              0x01840000
+#define BCM2711_GIC400_BASE_ADDRESS        (BCM2711_ARM_LOCAL_REGISTERS + BCM2711_GIC400_OFFSET)
+#define BCM2711_GIC400_LENGTH              0x00008000
+
+/* Generic PCI addresses */
+#define PCIE_TOP_OF_MEM_WIN                0xf8000000
+#define PCIE_CPU_MMIO_WINDOW               0x600000000
+#define PCIE_BRIDGE_MMIO_LEN               0x3ffffff
+
+/* PCI root bridge control registers location */
+#define PCIE_REG_BASE                      0xfd500000
+#define PCIE_REG_LIMIT                     0x9310
+
+/* PCI root bridge control registers */
+#define BRCM_PCIE_CAP_REGS                        0x00ac
+#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1   0x0188
+#define  VENDOR_SPECIFIC_REG1_LITTLE_ENDIAN          0x0
+#define PCIE_RC_CFG_PRIV1_ID_VAL3                 0x043c
+#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY         0x04dc
+#define  LINK_CAPABILITY_ASPM_SUPPORT_MASK         0xc00
+
+#define PCIE_RC_DL_MDIO_ADDR                      0x1100
+#define PCIE_RC_DL_MDIO_WR_DATA                   0x1104
+#define PCIE_RC_DL_MDIO_RD_DATA                   0x1108
+
+#define PCIE_MISC_MISC_CTRL                       0x4008
+#define  MISC_CTRL_SCB_ACCESS_EN_MASK             0x1000
+#define  MISC_CTRL_CFG_READ_UR_MODE_MASK          0x2000
+#define  MISC_CTRL_MAX_BURST_SIZE_MASK            0x300000
+#define  MISC_CTRL_MAX_BURST_SIZE_128             0x0
+#define  MISC_CTRL_SCB0_SIZE_MASK                 0xf8000000
+
+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO          0x400c
+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI          0x4010
+#define PCIE_MEM_WIN0_LO(win)	\
+		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 4)
+
+#define PCIE_MEM_WIN0_HI(win)	\
+		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 4)
+#define PCIE_MISC_RC_BAR1_CONFIG_LO               0x402c
+#define  RC_BAR1_CONFIG_LO_SIZE_MASK                0x1f
+#define PCIE_MISC_RC_BAR2_CONFIG_LO               0x4034
+#define  RC_BAR2_CONFIG_LO_SIZE_MASK                0x1f
+#define PCIE_MISC_RC_BAR2_CONFIG_HI               0x4038
+#define PCIE_MISC_RC_BAR3_CONFIG_LO               0x403c
+#define  RC_BAR3_CONFIG_LO_SIZE_MASK                0x1f
+#define PCIE_MISC_PCIE_STATUS                     0x4068
+#define  STATUS_PCIE_PORT_MASK                      0x80
+#define  STATUS_PCIE_PORT_SHIFT                        7
+#define  STATUS_PCIE_DL_ACTIVE_MASK                 0x20
+#define  STATUS_PCIE_DL_ACTIVE_SHIFT                   5
+#define  STATUS_PCIE_PHYLINKUP_MASK                 0x10
+#define  STATUS_PCIE_PHYLINKUP_SHIFT                   4
+#define PCIE_MISC_REVISION                        0x406c
+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT  0x4070
+#define  MEM_WIN0_BASE_LIMIT_LIMIT_MASK           0xfff00000
+#define  MEM_WIN0_BASE_LIMIT_BASE_MASK            0xfff0
+#define  MEM_WIN0_BASE_LIMIT_BASE_HI_SHIFT        12
+#define PCIE_MEM_WIN0_BASE_LIMIT(win)	\
+	 PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4)
+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI     0x4080
+#define  MEM_WIN0_BASE_HI_BASE_MASK               0xff
+#define PCIE_MEM_WIN0_BASE_HI(win)	\
+	 PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8)
+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI    0x4084
+#define  PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK        0xff
+#define PCIE_MEM_WIN0_LIMIT_HI(win)	\
+	 PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
+
+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG            0x4204
+#define  PCIE_HARD_DEBUG_SERDES_IDDQ_MASK         0x08000000
+
+#define PCIE_INTR2_CPU_STATUS                 0x4300
+#define PCIE_INTR2_CPU_SET                    0x4304
+#define PCIE_INTR2_CPU_CLR                    0x4308
+#define PCIE_INTR2_CPU_MASK_STATUS            0x430c
+#define PCIE_INTR2_CPU_MASK_SET               0x4310
+#define PCIE_INTR2_CPU_MASK_CLR               0x4314
+
+#define PCIE_MSI_INTR2_CLR                    0x4508
+#define PCIE_MSI_INTR2_MASK_SET               0x4510
+
+#define PCIE_RGR1_SW_INIT_1                   0x9210
+#define PCIE_EXT_CFG_INDEX                    0x9000
+/* A small window pointing at the ECAM of the device selected by CFG_INDEX */
+#define PCIE_EXT_CFG_DATA                     0x8000
+
+#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc
+#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK                     0xffffff
+
+#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK                  0x1000
+#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK               0x2000
+#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK                 0x300000
+#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK                      0xf8000000
+#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK                      0x7c00000
+#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK                      0x1f
+#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK                   0x1f
+
+#define PCIE_RGR1_SW_INIT_1_INIT_MASK                           0x2
+#define PCIE_RGR1_SW_INIT_1_PERST_MASK                          0x1
+
+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK         0x08000000
+
+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
+
+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK     0xfff00000
+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK      0xfff0
+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK         0xff
+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK       0xff
+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_MASK_BITS                 0xc
+
+#define PCIE_MISC_REVISION_MAJMIN_MASK                          0xffff
+
+#define BURST_SIZE_128          0
+#define BURST_SIZE_256          1
+#define BURST_SIZE_512          2
+
+#define BCM2711_THERM_SENSOR_OFFSET           0x015d2200
+#define BCM2711_THERM_SENSOR_BASE_ADDRESS     (BCM2711_SOC_REGISTERS + BCM2711_THERM_SENSOR_OFFSET)
+#define BCM2711_THERM_SENSOR_LENGTH           0x00000008
+
+#define BCM2711_GENET_BASE_OFFSET             0x01580000
+#define BCM2711_GENET_BASE_ADDRESS            (BCM2711_SOC_REGISTERS + BCM2711_GENET_BASE_OFFSET)
+#define BCM2711_GENET_LENGTH                  0x10000
+
+#endif /* BCM2711_H__ */
diff --git a/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836.h b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836.h
new file mode 100644
index 0000000000..64cec36a94
--- /dev/null
+++ b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836.h
@@ -0,0 +1,127 @@
+/* SPDX-License-Identifier: BSD-2-Clause-Patent */
+/**
+ *
+ *  Copyright (c) 2019, ARM Limited. All rights reserved.
+ *  Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *  Copyright (c) 2016, Linaro Limited. All rights reserved.
+ *
+ **/
+
+#ifndef __BCM2836_H__
+#define __BCM2836_H__
+
+/*
+ * Both "core" and SoC perpherals (1M each).
+ */
+#define BCM2836_SOC_REGISTERS                 0xfe000000
+#define BCM2836_SOC_REGISTER_LENGTH           0x02000000
+
+/*
+ * Offset between the CPU's view and the VC's view of system memory.
+ */
+#define BCM2836_DMA_DEVICE_OFFSET             0xc0000000
+
+/* watchdog constants */
+#define BCM2836_WDOG_OFFSET                   0x00100000
+#define BCM2836_WDOG_BASE_ADDRESS             (BCM2836_SOC_REGISTERS + BCM2836_WDOG_OFFSET)
+#define BCM2836_WDOG_PASSWORD                 0x5a000000
+#define BCM2836_WDOG_RSTC_OFFSET              0x0000001c
+#define BCM2836_WDOG_WDOG_OFFSET              0x00000024
+#define BCM2836_WDOG_RSTC_WRCFG_MASK          0x00000030
+#define BCM2836_WDOG_RSTC_WRCFG_FULL_RESET    0x00000020
+
+/* clock manager constants */
+#define BCM2836_CM_OFFSET                     0x00101000
+#define BCM2836_CM_BASE                       (BCM2836_SOC_REGISTERS + BCM2836_CM_OFFSET)
+#define BCM2836_CM_GEN_CLOCK_CONTROL          0x0000
+#define BCM2836_CM_GEN_CLOCK_DIVISOR          0x0004
+#define BCM2836_CM_VPU_CLOCK_CONTROL          0x0008
+#define BCM2836_CM_VPU_CLOCK_DIVISOR          0x000c
+#define BCM2836_CM_SYSTEM_CLOCK_CONTROL       0x0010
+#define BCM2836_CM_SYSTEM_CLOCK_DIVISOR       0x0014
+#define BCM2836_CM_H264_CLOCK_CONTROL         0x0028
+#define BCM2836_CM_H264_CLOCK_DIVISOR         0x002c
+#define BCM2836_CM_PWM_CLOCK_CONTROL          0x00a0
+#define BCM2836_CM_PWM_CLOCK_DIVISOR          0x00a4
+#define BCM2836_CM_UART_CLOCK_CONTROL         0x00f0
+#define BCM2836_CM_UART_CLOCK_DIVISOR         0x00f4
+#define BCM2836_CM_SDC_CLOCK_CONTROL          0x01a8
+#define BCM2836_CM_SDC_CLOCK_DIVISOR          0x01ac
+#define BCM2836_CM_ARM_CLOCK_CONTROL          0x01b0
+#define BCM2836_CM_ARM_CLOCK_DIVISOR          0x01b4
+#define BCM2836_CM_EMMC_CLOCK_CONTROL         0x01c0
+#define BCM2836_CM_EMMC_CLOCK_DIVISOR         0x01c4
+
+/* mailbox interface constants */
+#define BCM2836_MBOX_OFFSET                   0x0000b880
+#define BCM2836_MBOX_BASE_ADDRESS             (BCM2836_SOC_REGISTERS + BCM2836_MBOX_OFFSET)
+#define BCM2836_MBOX_LENGTH                   0x00000024
+#define BCM2836_MBOX_READ_OFFSET              0x00000000
+#define BCM2836_MBOX_STATUS_OFFSET            0x00000018
+#define BCM2836_MBOX_CONFIG_OFFSET            0x0000001c
+#define BCM2836_MBOX_WRITE_OFFSET             0x00000020
+
+#define BCM2836_MBOX_STATUS_FULL              0x1f
+#define BCM2836_MBOX_STATUS_EMPTY             0x1e
+
+#define BCM2836_MBOX_NUM_CHANNELS             16
+
+/* interrupt controller constants */
+#define BCM2836_INTC_TIMER_CONTROL_OFFSET     0x00000040
+#define BCM2836_INTC_TIMER_PENDING_OFFSET     0x00000060
+
+/* usb constants */
+#define BCM2836_USB_OFFSET                    0x00980000
+#define BCM2836_USB_BASE_ADDRESS              (BCM2836_SOC_REGISTERS + BCM2836_USB_OFFSET)
+#define BCM2836_USB_LENGTH                    0x00010000
+
+/* serial based protocol constants */
+#define BCM2836_PL011_UART_OFFSET             0x00201000
+#define BCM2836_PL011_UART_BASE_ADDRESS       (BCM2836_SOC_REGISTERS + BCM2836_PL011_UART_OFFSET)
+#define BCM2836_PL011_UART_LENGTH             0x00001000
+
+#define BCM2836_MINI_UART_OFFSET              0x00215000
+#define BCM2836_MINI_UART_BASE_ADDRESS        (BCM2836_SOC_REGISTERS + BCM2836_MINI_UART_OFFSET)
+#define BCM2836_MINI_UART_LENGTH              0x00000070
+
+#define BCM2836_I2C0_OFFSET                   0x00205000
+#define BCM2836_I2C0_BASE_ADDRESS             (BCM2836_SOC_REGISTERS + BCM2836_I2C0_OFFSET)
+#define BCM2836_I2C0_LENGTH                   0x00000020
+
+#define BCM2836_I2C1_OFFSET                   0x00804000
+#define BCM2836_I2C1_BASE_ADDRESS             (BCM2836_SOC_REGISTERS + BCM2836_I2C1_OFFSET)
+#define BCM2836_I2C1_LENGTH                   0x00000020
+
+#define BCM2836_I2C2_OFFSET                   0x00805000
+#define BCM2836_I2C2_BASE_ADDRESS             (BCM2836_SOC_REGISTERS + BCM2836_I2C2_OFFSET)
+#define BCM2836_I2C2_LENGTH                   0x00000020
+
+#define BCM2836_SPI0_OFFSET                   0x00204000
+#define BCM2836_SPI0_BASE_ADDRESS             (BCM2836_SOC_REGISTERS + BCM2836_SPI0_OFFSET)
+#define BCM2836_SPI0_LENGTH                   0x00000020
+
+#define BCM2836_SPI1_OFFSET                   0x00215080
+#define BCM2836_SPI1_LENGTH                   0x00000040
+#define BCM2836_SPI1_BASE_ADDRESS             (BCM2836_SOC_REGISTERS + BCM2836_SPI1_OFFSET)
+
+#define BCM2836_SPI2_OFFSET                   0x002150C0
+#define BCM2836_SPI2_LENGTH                   0x00000040
+#define BCM2836_SPI2_BASE_ADDRESS             (BCM2836_SOC_REGISTERS + BCM2836_SPI2_OFFSET)
+
+#define BCM2836_SYSTEM_TIMER_OFFSET           0x00003000
+#define BCM2836_SYSTEM_TIMER_LENGTH           0x00000020
+#define BCM2836_SYSTEM_TIMER_ADDRESS          (BCM2836_SOC_REGISTERS + BCM2836_SYSTEM_TIMER_OFFSET)
+
+/* dma constants */
+#define BCM2836_DMA0_OFFSET                   0x00007000
+#define BCM2836_DMA0_BASE_ADDRESS             (BCM2836_SOC_REGISTERS + BCM2836_DMA0_OFFSET)
+
+#define BCM2836_DMA15_OFFSET                  0x00E05000
+#define BCM2836_DMA15_BASE_ADDRESS            (BCM2836_SOC_REGISTERS + BCM2836_DMA15_OFFSET)
+
+#define BCM2836_DMA_CTRL_OFFSET               0x00007FE0
+#define BCM2836_DMA_CTRL_BASE_ADDRESS         (BCM2836_SOC_REGISTERS + BCM2836_DMA_CTRL_OFFSET)
+
+#define BCM2836_DMA_CHANNEL_LENGTH            0x00000100
+
+#endif /*__BCM2836_H__ */
diff --git a/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpio.h b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpio.h
new file mode 100644
index 0000000000..c5b858b412
--- /dev/null
+++ b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpio.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: BSD-2-Clause-Patent */
+/**
+ *
+ *  Copyright (c) 2020, Pete Batard <pete@akeo.ie>
+ *  Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *  Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ **/
+
+#include <asm/arch/acpi/bcm2836.h>
+
+#ifndef __BCM2836_GPIO_H__
+#define __BCM2836_GPIO_H__
+
+#define GPIO_OFFSET        0x00200000
+#define GPIO_BASE_ADDRESS  (BCM2836_SOC_REGISTERS + GPIO_OFFSET)
+#define GPIO_LENGTH        0x000000B4
+
+#endif /* __BCM2836_GPIO_H__ */
diff --git a/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpu.h b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpu.h
new file mode 100644
index 0000000000..5857d7581a
--- /dev/null
+++ b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpu.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: BSD-2-Clause-Patent */
+/**
+ *
+ *  Copyright (c) 2020, Pete Batard <pete@akeo.ie>
+ *
+ **/
+
+#include <asm/arch/acpi/bcm2836.h>
+
+#ifndef __BCM2836_GPU_H__
+#define __BCM2836_GPU_H__
+
+/* VideoCore constants */
+
+#define BCM2836_VCHIQ_OFFSET                  0x0000B840
+#define BCM2836_VCHIQ_BASE_ADDRESS            (BCM2836_SOC_REGISTERS + BCM2836_VCHIQ_OFFSET)
+#define BCM2836_VCHIQ_LENGTH                  0x00000010
+
+#define BCM2836_V3D_BUS_OFFSET                0x00C00000
+#define BCM2836_V3D_BUS_BASE_ADDRESS          (BCM2836_SOC_REGISTERS + BCM2836_V3D_BUS_OFFSET)
+#define BCM2836_V3D_BUS_LENGTH                0x00001000
+
+#define BCM2836_HVS_OFFSET                    0x00400000
+#define BCM2836_HVS_BASE_ADDRESS              (BCM2836_SOC_REGISTERS + BCM2836_HVS_OFFSET)
+#define BCM2836_HVS_LENGTH                    0x00006000
+
+#define BCM2836_PV0_OFFSET                    0x00206000
+#define BCM2836_PV0_BASE_ADDRESS              (BCM2836_SOC_REGISTERS + BCM2836_PV0_OFFSET)
+#define BCM2836_PV0_LENGTH                    0x00000100
+
+#define BCM2836_PV1_OFFSET                    0x00207000
+#define BCM2836_PV1_BASE_ADDRESS              (BCM2836_SOC_REGISTERS + BCM2836_PV1_OFFSET)
+#define BCM2836_PV1_LENGTH                    0x00000100
+
+#define BCM2836_PV2_OFFSET                    0x00807000
+#define BCM2836_PV2_BASE_ADDRESS              (BCM2836_SOC_REGISTERS + BCM2836_PV2_OFFSET)
+#define BCM2836_PV2_LENGTH                    0x00000100
+
+#define BCM2836_HDMI0_OFFSET                  0x00902000
+#define BCM2836_HDMI0_BASE_ADDRESS            (BCM2836_SOC_REGISTERS + BCM2836_HDMI0_OFFSET)
+#define BCM2836_HDMI0_LENGTH                  0x00000600
+
+#define BCM2836_HDMI1_OFFSET                  0x00808000
+#define BCM2836_HDMI1_BASE_ADDRESS            (BCM2836_SOC_REGISTERS + BCM2836_HDMI1_OFFSET)
+#define BCM2836_HDMI1_LENGTH                  0x00000100
+
+#endif /* __BCM2836_MISC_H__ */
diff --git a/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_pwm.h b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_pwm.h
new file mode 100644
index 0000000000..78a8486673
--- /dev/null
+++ b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_pwm.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-2-Clause-Patent */
+/**
+ *
+ *  Copyright (c) 2020, Pete Batard <pete@akeo.ie>
+ *
+ **/
+
+#include <asm/arch/acpi/bcm2836.h>
+
+#ifndef __BCM2836_PWM_H__
+#define __BCM2836_PWM_H__
+
+/* PWM controller constants */
+
+#define BCM2836_PWM_DMA_OFFSET                 0x00007B00
+#define BCM2836_PWM_DMA_BASE_ADDRESS           (BCM2836_SOC_REGISTERS + BCM2836_PWM_DMA_OFFSET)
+#define BCM2836_PWM_DMA_LENGTH                 0x00000100
+
+#define BCM2836_PWM_CLK_OFFSET                 0x001010A0
+#define BCM2836_PWM_CLK_BASE_ADDRESS           (BCM2836_SOC_REGISTERS + BCM2836_PWM_CLK_OFFSET)
+#define BCM2836_PWM_CLK_LENGTH                 0x00000008
+
+#define BCM2836_PWM_CTRL_OFFSET                0x0020C000
+#define BCM2836_PWM_CTRL_BASE_ADDRESS          (BCM2836_SOC_REGISTERS + BCM2836_PWM_CTRL_OFFSET)
+#define BCM2836_PWM_CTRL_LENGTH                0x00000028
+
+#define BCM2836_PWM_BUS_BASE_ADDRESS           0x7E20C000
+#define BCM2836_PWM_BUS_LENGTH                 0x00000028
+
+#define BCM2836_PWM_CTRL_UNCACHED_BASE_ADDRESS 0xFF20C000
+#define BCM2836_PWM_CTRL_UNCACHED_LENGTH       0x00000028
+
+#endif /* __BCM2836_PWM_H__ */
diff --git a/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdhost.h b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdhost.h
new file mode 100644
index 0000000000..9b1afe8440
--- /dev/null
+++ b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdhost.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: BSD-2-Clause-Patent */
+/**
+ *
+ *  Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *  Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ **/
+
+#include <asm/arch/acpi/bcm2836.h>
+
+#ifndef __BCM2836_SDHOST_H__
+#define __BCM2836_SDHOST_H__
+
+#define SDHOST_OFFSET               0x00202000
+#define SDHOST_BASE_ADDRESS         (BCM2836_SOC_REGISTERS + SDHOST_OFFSET)
+#define SDHOST_LENGTH               0x00000100
+
+#endif /*__BCM2836_SDHOST_H__ */
diff --git a/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdio.h b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdio.h
new file mode 100644
index 0000000000..48d073d434
--- /dev/null
+++ b/arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdio.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: BSD-2-Clause-Patent */
+/**
+ *
+ *  Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ **/
+
+#include <asm/arch/acpi/bcm2836.h>
+
+#ifndef __BCM2836_SDIO_H__
+#define __BCM2836_SDIO_H__
+
+// MMC/SD/SDIO1 register definitions.
+#define MMCHS1_OFFSET     0x00300000
+#define MMCHS2_OFFSET     0x00340000
+#define MMCHS1_BASE       (BCM2836_SOC_REGISTERS + MMCHS1_OFFSET)
+#define MMCHS2_BASE       (BCM2836_SOC_REGISTERS + MMCHS2_OFFSET)
+#define MMCHS1_LENGTH     0x00000100
+#define MMCHS2_LENGTH     0x00000100
+
+#endif /* __BCM2836_SDIO_H__ */
diff --git a/drivers/pci/pcie_brcmstb.c b/drivers/pci/pcie_brcmstb.c
index f978c64365..f089c48f02 100644
--- a/drivers/pci/pcie_brcmstb.c
+++ b/drivers/pci/pcie_brcmstb.c
@@ -12,6 +12,7 @@
  * Copyright (C) 2020 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
  */
 
+#include <asm/arch/acpi/bcm2711.h>
 #include <errno.h>
 #include <dm.h>
 #include <dm/ofnode.h>
@@ -21,88 +22,6 @@
 #include <linux/log2.h>
 #include <linux/iopoll.h>
 
-/* Offset of the mandatory PCIe capability config registers */
-#define BRCM_PCIE_CAP_REGS				0x00ac
-
-/* The PCIe controller register offsets */
-#define PCIE_RC_CFG_VENDOR_SPECIFIC_REG1		0x0188
-#define  VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK	0xc
-#define  VENDOR_SPECIFIC_REG1_LITTLE_ENDIAN		0x0
-
-#define PCIE_RC_CFG_PRIV1_ID_VAL3			0x043c
-#define  CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK		0xffffff
-
-#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY			0x04dc
-#define  PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK	0xc00
-
-#define PCIE_RC_DL_MDIO_ADDR				0x1100
-#define PCIE_RC_DL_MDIO_WR_DATA				0x1104
-#define PCIE_RC_DL_MDIO_RD_DATA				0x1108
-
-#define PCIE_MISC_MISC_CTRL				0x4008
-#define  MISC_CTRL_SCB_ACCESS_EN_MASK			0x1000
-#define  MISC_CTRL_CFG_READ_UR_MODE_MASK		0x2000
-#define  MISC_CTRL_MAX_BURST_SIZE_MASK			0x300000
-#define  MISC_CTRL_MAX_BURST_SIZE_128			0x0
-#define  MISC_CTRL_SCB0_SIZE_MASK			0xf8000000
-
-#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO		0x400c
-#define PCIE_MEM_WIN0_LO(win)	\
-		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 4)
-
-#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI		0x4010
-#define PCIE_MEM_WIN0_HI(win)	\
-		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 4)
-
-#define PCIE_MISC_RC_BAR1_CONFIG_LO			0x402c
-#define  RC_BAR1_CONFIG_LO_SIZE_MASK			0x1f
-
-#define PCIE_MISC_RC_BAR2_CONFIG_LO			0x4034
-#define  RC_BAR2_CONFIG_LO_SIZE_MASK			0x1f
-#define PCIE_MISC_RC_BAR2_CONFIG_HI			0x4038
-
-#define PCIE_MISC_RC_BAR3_CONFIG_LO			0x403c
-#define  RC_BAR3_CONFIG_LO_SIZE_MASK			0x1f
-
-#define PCIE_MISC_PCIE_STATUS				0x4068
-#define  STATUS_PCIE_PORT_MASK				0x80
-#define  STATUS_PCIE_PORT_SHIFT				7
-#define  STATUS_PCIE_DL_ACTIVE_MASK			0x20
-#define  STATUS_PCIE_DL_ACTIVE_SHIFT			5
-#define  STATUS_PCIE_PHYLINKUP_MASK			0x10
-#define  STATUS_PCIE_PHYLINKUP_SHIFT			4
-
-#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT	0x4070
-#define  MEM_WIN0_BASE_LIMIT_LIMIT_MASK			0xfff00000
-#define  MEM_WIN0_BASE_LIMIT_BASE_MASK			0xfff0
-#define  MEM_WIN0_BASE_LIMIT_BASE_HI_SHIFT		12
-#define PCIE_MEM_WIN0_BASE_LIMIT(win)	\
-	 PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4)
-
-#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI		0x4080
-#define  MEM_WIN0_BASE_HI_BASE_MASK			0xff
-#define PCIE_MEM_WIN0_BASE_HI(win)	\
-	 PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8)
-
-#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI		0x4084
-#define  PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK		0xff
-#define PCIE_MEM_WIN0_LIMIT_HI(win)	\
-	 PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
-
-#define PCIE_MISC_HARD_PCIE_HARD_DEBUG			0x4204
-#define  PCIE_HARD_DEBUG_SERDES_IDDQ_MASK		0x08000000
-
-#define PCIE_MSI_INTR2_CLR				0x4508
-#define PCIE_MSI_INTR2_MASK_SET				0x4510
-
-#define PCIE_EXT_CFG_DATA				0x8000
-
-#define PCIE_EXT_CFG_INDEX				0x9000
-
-#define PCIE_RGR1_SW_INIT_1				0x9210
-#define  RGR1_SW_INIT_1_PERST_MASK			0x1
-#define  RGR1_SW_INIT_1_INIT_MASK			0x2
-
 /* PCIe parameters */
 #define BRCM_NUM_PCIE_OUT_WINS				4
 
@@ -447,7 +366,7 @@ static int brcm_pcie_probe(struct udevice *dev)
 	 * This will need to be changed when support for other SoCs is added.
 	 */
 	setbits_le32(base + PCIE_RGR1_SW_INIT_1,
-		     RGR1_SW_INIT_1_INIT_MASK | RGR1_SW_INIT_1_PERST_MASK);
+		     PCIE_RGR1_SW_INIT_1_INIT_MASK | PCIE_RGR1_SW_INIT_1_PERST_MASK);
 	/*
 	 * The delay is a safety precaution to preclude the reset signal
 	 * from looking like a glitch.
@@ -455,7 +374,7 @@ static int brcm_pcie_probe(struct udevice *dev)
 	udelay(100);
 
 	/* Take the bridge out of reset */
-	clrbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_INIT_MASK);
+	clrbits_le32(base + PCIE_RGR1_SW_INIT_1, PCIE_RGR1_SW_INIT_1_INIT_MASK);
 
 	clrbits_le32(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG,
 		     PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
@@ -508,7 +427,7 @@ static int brcm_pcie_probe(struct udevice *dev)
 
 	/* Unassert the fundamental reset */
 	clrbits_le32(pcie->base + PCIE_RGR1_SW_INIT_1,
-		     RGR1_SW_INIT_1_PERST_MASK);
+		     PCIE_RGR1_SW_INIT_1_PERST_MASK);
 
 	/*
 	 * Wait for 100ms after PERST# deassertion; see PCIe CEM specification
@@ -552,7 +471,7 @@ static int brcm_pcie_probe(struct udevice *dev)
 	 * a PCIe-PCIe bridge (the default setting is to be EP mode).
 	 */
 	clrsetbits_le32(base + PCIE_RC_CFG_PRIV1_ID_VAL3,
-			CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK, 0x060400);
+			PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK, 0x060400);
 
 	if (pcie->ssc) {
 		ret = brcm_pcie_set_ssc(pcie->base);
@@ -570,8 +489,8 @@ static int brcm_pcie_probe(struct udevice *dev)
 	       nlw, ssc_good ? "(SSC)" : "(!SSC)");
 
 	/* PCIe->SCB endian mode for BAR */
-	clrsetbits_le32(base + PCIE_RC_CFG_VENDOR_SPECIFIC_REG1,
-			VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK,
+	clrsetbits_le32(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1,
+			PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK,
 			VENDOR_SPECIFIC_REG1_LITTLE_ENDIAN);
 
 	/*
@@ -584,7 +503,7 @@ static int brcm_pcie_probe(struct udevice *dev)
 	 * let's instead just unadvertise ASPM support.
 	 */
 	clrbits_le32(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY,
-		     PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
+		     LINK_CAPABILITY_ASPM_SUPPORT_MASK);
 
 	return 0;
 }
@@ -595,14 +514,14 @@ static int brcm_pcie_remove(struct udevice *dev)
 	void __iomem *base = pcie->base;
 
 	/* Assert fundamental reset */
-	setbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_PERST_MASK);
+	setbits_le32(base + PCIE_RGR1_SW_INIT_1, PCIE_RGR1_SW_INIT_1_PERST_MASK);
 
 	/* Turn off SerDes */
 	setbits_le32(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG,
 		     PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
 
 	/* Shutdown bridge */
-	setbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_INIT_MASK);
+	setbits_le32(base + PCIE_RGR1_SW_INIT_1, PCIE_RGR1_SW_INIT_1_INIT_MASK);
 
 	return 0;
 }
-- 
2.46.2

[PATCH v9 31/37] armv8: cpu: Enable ACPI parking protocol

[Patrick Rudolph]

Update the generic entry point code to support the ACPI parking protocol.
The ACPI parking protocol can be used when PSCI is not available to bring
up secondary CPU cores.

When enabled secondary CPUs will enter U-Boot proper and spin in their own
4KiB reserved memory page, which also acts as mailbox with the OS to
release the CPU.

TEST: Boots all CPUs on qemu-system-aarch64 -machine raspi4b

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 arch/arm/cpu/armv8/start.S | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
index 7461280261..544a4a5364 100644
--- a/arch/arm/cpu/armv8/start.S
+++ b/arch/arm/cpu/armv8/start.S
@@ -178,6 +178,18 @@ pie_fixup_done:
 	branch_if_master x0, master_cpu
 	b	spin_table_secondary_jump
 	/* never return */
+#elif defined(CONFIG_ACPI_PARKING_PROTOCOL) && !defined(CONFIG_SPL_BUILD)
+	branch_if_master x0, master_cpu
+	/*
+	 * Waits for ACPI parking protocol memory to be allocated and the spin-table
+	 * code to be written. Once ready the secondary CPUs will jump and spin in
+	 * their own 4KiB memory region, which is also used as mailbox, until released
+	 * by the OS.
+	 * The mechanism is similar to the DT enable-method = "spin-table", but works
+	 * with ACPI enabled platforms.
+	 */
+	b	acpi_pp_secondary_jump
+	/* never return */
 #elif defined(CONFIG_ARMV8_MULTIENTRY)
 	branch_if_master x0, master_cpu
 
-- 
2.46.2

[PATCH v9 32/37] arm: Implement read_mpidr on armv7

[Patrick Rudolph]

Implement read_mpidr() on armv7 to make use of it in generic
code that compiles on both armv7 and armv8.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 arch/arm/include/asm/system.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 2237d7d006..9eb30c2ade 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -394,6 +394,15 @@ void switch_to_hypervisor_ret(void);
 #define wfi()
 #endif
 
+static inline unsigned long read_mpidr(void)
+{
+	unsigned long val;
+
+	asm volatile("mrc p15, 0, %0, c0, c0, 5" : "=r" (val));
+
+	return val;
+}
+
 static inline unsigned long get_cpsr(void)
 {
 	unsigned long cpsr;
-- 
2.46.2

[PATCH v9 35/37] bloblist: Fix use of uninitialized variable

[Patrick Rudolph]

Initialize addr to zero which allows to build on the CI
which is more strict.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 common/bloblist.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/common/bloblist.c b/common/bloblist.c
index 2008ab4d25..cf1a3b8b62 100644
--- a/common/bloblist.c
+++ b/common/bloblist.c
@@ -499,7 +499,7 @@ int bloblist_init(void)
 {
 	bool fixed = IS_ENABLED(CONFIG_BLOBLIST_FIXED);
 	int ret = -ENOENT;
-	ulong addr, size;
+	ulong addr = 0, size;
 	/*
 	 * If U-Boot is not in the first phase, an existing bloblist must be
 	 * at a fixed address.
-- 
2.46.2

[PATCH v9 37/37] CI: Enable qemu_sbsa

[Patrick Rudolph]

Add QEMU's SBSA ref board to azure pipelines and gitlab CI to run tests on it.
TEST: Run on Azure pipelines and confirmed that tests succeed.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
Changelog v6:
- Add gitlab CI support
---
 .azure-pipelines.yml |  8 ++++++++
 .gitlab-ci.yml       | 11 +++++++++++
 2 files changed, 19 insertions(+)

diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml
index 93111eb612..2881851ecf 100644
--- a/.azure-pipelines.yml
+++ b/.azure-pipelines.yml
@@ -250,6 +250,11 @@ stages:
               wget -O - https://github.com/riscv-software-src/opensbi/releases/download/v1.3.1/opensbi-1.3.1-rv-bin.tar.xz | tar -C /tmp -xJ;
               export OPENSBI=/tmp/opensbi-1.3.1-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin;
           fi
+          if [[ "\${TEST_PY_BD}" == "qemu-arm-sbsa" ]]; then
+              wget -O /tmp/bl1.bin https://artifacts.codelinaro.org/artifactory/linaro-419-sbsa-ref/latest/tf-a/bl1.bin;
+              wget -O /tmp/fip.bin https://artifacts.codelinaro.org/artifactory/linaro-419-sbsa-ref/latest/tf-a/fip.bin;
+              export BINMAN_INDIRS=/tmp
+          fi
           # the below corresponds to .gitlab-ci.yml "script"
           cd \${WORK_DIR}
           export UBOOT_TRAVIS_BUILD_DIR=/tmp/\${TEST_PY_BD}
@@ -415,6 +420,9 @@ stages:
         qemu_arm64:
           TEST_PY_BD: "qemu_arm64"
           TEST_PY_TEST_SPEC: "not sleep"
+        qemu_arm_sbsa_ref:
+          TEST_PY_BD: "qemu-arm-sbsa"
+          TEST_PY_TEST_SPEC: "not sleep"
         qemu_m68k:
           TEST_PY_BD: "M5208EVBE"
           TEST_PY_ID: "--id qemu"
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 7d621031b8..3f02a492d5 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -39,6 +39,11 @@ stages:
         wget -O - https://github.com/riscv-software-src/opensbi/releases/download/v1.3.1/opensbi-1.3.1-rv-bin.tar.xz | tar -C /tmp -xJ;
         export OPENSBI=/tmp/opensbi-1.3.1-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin;
       fi
+    - if [[ "${TEST_PY_BD}" == "qemu-arm-sbsa" ]]; then
+        wget -O /tmp/bl1.bin https://artifacts.codelinaro.org/artifactory/linaro-419-sbsa-ref/latest/tf-a/bl1.bin;
+        wget -O /tmp/fip.bin https://artifacts.codelinaro.org/artifactory/linaro-419-sbsa-ref/latest/tf-a/fip.bin;
+        export BINMAN_INDIRS=/tmp
+      fi
 
   after_script:
     - cp -v /tmp/${TEST_PY_BD}/*.{html,css,xml} .
@@ -344,6 +349,12 @@ qemu_arm64 test.py:
     TEST_PY_TEST_SPEC: "not sleep"
   <<: *buildman_and_testpy_dfn
 
+qemu_arm_sbsa test.py:
+  variables:
+    TEST_PY_BD: "qemu-arm-sbsa"
+    TEST_PY_TEST_SPEC: "not sleep"
+  <<: *buildman_and_testpy_dfn
+
 qemu_m68k test.py:
   variables:
     TEST_PY_BD: "M5208EVBE"
-- 
2.46.2

Re: [PATCH v9 20/37] arm: gic-v3-its: Implement of_xlate

[Moritz Fischer]

On Tue, Oct 15, 2024 at 11:15 PM Patrick Rudolph
<patrick.rudolph@9elements.com> wrote:
>
> Translate IRQs by implementing of_xlate() as required by
> irq_get_by_index() to parse interrupt properties.
>
> Map DT interrupts to ARM GIC interrupts as follows:
>
> - Interrupt numbers ID32-ID1019 are used for SPIs
> - ID0-ID15 are used for SGIs
> - ID16-ID31 are used for PPIs
>
> TEST: Booted on qemu sbsa-ref that has a GICV3.
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

Reviewed-by: Moritz Fischer <moritzf@google.com>
> ---
> Changelog v9:
> - Require at least 3 interrupt-cells
> - Map SPI interrupts to ID32+
> - Map PPI interrupts to ID16+
> ---
>  arch/arm/lib/gic-v3-its.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/lib/gic-v3-its.c b/arch/arm/lib/gic-v3-its.c
> index 22fa46a341..58f8bf864f 100644
> --- a/arch/arm/lib/gic-v3-its.c
> +++ b/arch/arm/lib/gic-v3-its.c
> @@ -4,9 +4,11 @@
>   */
>  #include <cpu_func.h>
>  #include <dm.h>
> +#include <irq.h>
>  #include <asm/gic.h>
>  #include <asm/gic-v3.h>
>  #include <asm/io.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <linux/bitops.h>
>  #include <linux/printk.h>
>  #include <linux/sizes.h>
> @@ -163,8 +165,30 @@ static const struct udevice_id gic_v3_ids[] = {
>         {}
>  };
>
> +static int arm_gic_v3_of_xlate(struct irq *irq, struct ofnode_phandle_args *args)
> +{
> +       if (args->args_count < 3) {
> +               log_debug("Invalid args_count: %d\n", args->args_count);
> +               return -EINVAL;
> +       }
> +
> +       if (args->args[0] == GIC_SPI)
> +               irq->id = args->args[1] + 32;
> +       else
> +               irq->id = args->args[1] + 16;
> +
> +       irq->flags = args->args[2];
> +
> +       return 0;
> +}
> +
> +static const struct irq_ops arm_gic_v3_ops = {
> +       .of_xlate               =  arm_gic_v3_of_xlate,
> +};
> +
>  U_BOOT_DRIVER(arm_gic_v3) = {
>         .name           = "gic-v3",
>         .id             = UCLASS_IRQ,
>         .of_match       = gic_v3_ids,
> +       .ops            = &arm_gic_v3_ops,
>  };
> --
> 2.46.2
>

Re: [PATCH v9 24/37] common: Enable BLOBLIST_TABLES on arm

[Simon Glass]

Hi Patrick,

On Wed, 16 Oct 2024 at 00:16, Patrick Rudolph
<patrick.rudolph@9elements.com> wrote:
>
> Allow to use BLOBLIST_TABLES on arm to store ACPI or other tables.
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Cc: Tom Rini <trini@konsulko.com>
> ---
> Changelog v9:
> - default to BLOBLIST_ALLOC on arm
> - Move default for BLOBLIST_SIZE_RELOC up
> ---
>  common/Kconfig |  2 ++
>  lib/Kconfig    | 15 +++++++++------
>  2 files changed, 11 insertions(+), 6 deletions(-)
>

This is fine, but please disable it for snow since it needs the FIXED
option for now.

Regards,
Simon

Re: [PATCH v9 24/37] common: Enable BLOBLIST_TABLES on arm

[Patrick Rudolph]

Hi Simon,
On Fri, Oct 18, 2024 at 1:18 AM Simon Glass <sjg@chromium.org> wrote:
>
> Hi Patrick,
>
> On Wed, 16 Oct 2024 at 00:16, Patrick Rudolph
> <patrick.rudolph@9elements.com> wrote:
> >
> > Allow to use BLOBLIST_TABLES on arm to store ACPI or other tables.
> >
> > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > Cc: Tom Rini <trini@konsulko.com>
> > ---
> > Changelog v9:
> > - default to BLOBLIST_ALLOC on arm
> > - Move default for BLOBLIST_SIZE_RELOC up
> > ---
> >  common/Kconfig |  2 ++
> >  lib/Kconfig    | 15 +++++++++------
> >  2 files changed, 11 insertions(+), 6 deletions(-)
> >
>
> This is fine, but please disable it for snow since it needs the FIXED
> option for now.

I cannot follow. What needs the FIXED option and what to disable?
I run this patch on the CI and test_py_sandbox tests are still working.

>
> Regards,
> Simon

Re: [PATCH v9 24/37] common: Enable BLOBLIST_TABLES on arm

[Simon Glass]

Hi Patrick,

On Mon, 21 Oct 2024 at 10:26, Patrick Rudolph
<patrick.rudolph@9elements.com> wrote:
>
> Hi Simon,
> On Fri, Oct 18, 2024 at 1:18 AM Simon Glass <sjg@chromium.org> wrote:
> >
> > Hi Patrick,
> >
> > On Wed, 16 Oct 2024 at 00:16, Patrick Rudolph
> > <patrick.rudolph@9elements.com> wrote:
> > >
> > > Allow to use BLOBLIST_TABLES on arm to store ACPI or other tables.
> > >
> > > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > > Cc: Tom Rini <trini@konsulko.com>
> > > ---
> > > Changelog v9:
> > > - default to BLOBLIST_ALLOC on arm
> > > - Move default for BLOBLIST_SIZE_RELOC up
> > > ---
> > >  common/Kconfig |  2 ++
> > >  lib/Kconfig    | 15 +++++++++------
> > >  2 files changed, 11 insertions(+), 6 deletions(-)
> > >
> >
> > This is fine, but please disable it for snow since it needs the FIXED
> > option for now.
>
> I cannot follow. What needs the FIXED option and what to disable?
> I run this patch on the CI and test_py_sandbox tests are still working.

I mean that snow cannot use BLOBLIST_ALLOC and needs BLOBLIST_FIXED so
if you make ALLOC the default you need to change the default for snow.

My lab is still not running, unfortunately, but I will try to get it
sorted out soon.

Regards,
Simon

Re: [PATCH v9 24/37] common: Enable BLOBLIST_TABLES on arm

[Peter Robinson]

> > > > Allow to use BLOBLIST_TABLES on arm to store ACPI or other tables.
> > > >
> > > > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > > > Cc: Tom Rini <trini@konsulko.com>
> > > > ---
> > > > Changelog v9:
> > > > - default to BLOBLIST_ALLOC on arm
> > > > - Move default for BLOBLIST_SIZE_RELOC up
> > > > ---
> > > >  common/Kconfig |  2 ++
> > > >  lib/Kconfig    | 15 +++++++++------
> > > >  2 files changed, 11 insertions(+), 6 deletions(-)
> > > >
> > >
> > > This is fine, but please disable it for snow since it needs the FIXED
> > > option for now.
> >
> > I cannot follow. What needs the FIXED option and what to disable?
> > I run this patch on the CI and test_py_sandbox tests are still working.
>
> I mean that snow cannot use BLOBLIST_ALLOC and needs BLOBLIST_FIXED so
> if you make ALLOC the default you need to change the default for snow.

Simon by snow do you mean the device (configs/snow_defconfig) snow, I
think Patrick doesn't know you're referring to what I believe to be a
device config.

Re: [PATCH v9 24/37] common: Enable BLOBLIST_TABLES on arm

[Simon Glass]

Hi Peter,

On Mon, 21 Oct 2024 at 19:57, Peter Robinson <pbrobinson@gmail.com> wrote:
>
> > > > > Allow to use BLOBLIST_TABLES on arm to store ACPI or other tables.
> > > > >
> > > > > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > > > > Cc: Tom Rini <trini@konsulko.com>
> > > > > ---
> > > > > Changelog v9:
> > > > > - default to BLOBLIST_ALLOC on arm
> > > > > - Move default for BLOBLIST_SIZE_RELOC up
> > > > > ---
> > > > >  common/Kconfig |  2 ++
> > > > >  lib/Kconfig    | 15 +++++++++------
> > > > >  2 files changed, 11 insertions(+), 6 deletions(-)
> > > > >
> > > >
> > > > This is fine, but please disable it for snow since it needs the FIXED
> > > > option for now.
> > >
> > > I cannot follow. What needs the FIXED option and what to disable?
> > > I run this patch on the CI and test_py_sandbox tests are still working.
> >
> > I mean that snow cannot use BLOBLIST_ALLOC and needs BLOBLIST_FIXED so
> > if you make ALLOC the default you need to change the default for snow.
>
> Simon by snow do you mean the device (configs/snow_defconfig) snow, I
> think Patrick doesn't know you're referring to what I believe to be a
> device config.

Oh OK, yes that is what I mean. If it is too confusing I can send a
fix-up patch after this series is applied.

Regards,
SImon

Re: [PATCH v9 24/37] common: Enable BLOBLIST_TABLES on arm

[Patrick Rudolph]

Hi Simon,
On Tue, Oct 22, 2024 at 2:16 PM Simon Glass <sjg@chromium.org> wrote:
>
> Hi Peter,
>
> On Mon, 21 Oct 2024 at 19:57, Peter Robinson <pbrobinson@gmail.com> wrote:
> >
> > > > > > Allow to use BLOBLIST_TABLES on arm to store ACPI or other tables.
> > > > > >
> > > > > > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > > > > > Cc: Tom Rini <trini@konsulko.com>
> > > > > > ---
> > > > > > Changelog v9:
> > > > > > - default to BLOBLIST_ALLOC on arm
> > > > > > - Move default for BLOBLIST_SIZE_RELOC up
> > > > > > ---
> > > > > >  common/Kconfig |  2 ++
> > > > > >  lib/Kconfig    | 15 +++++++++------
> > > > > >  2 files changed, 11 insertions(+), 6 deletions(-)
> > > > > >
> > > > >
> > > > > This is fine, but please disable it for snow since it needs the FIXED
> > > > > option for now.
> > > >
> > > > I cannot follow. What needs the FIXED option and what to disable?
> > > > I run this patch on the CI and test_py_sandbox tests are still working.
> > >
> > > I mean that snow cannot use BLOBLIST_ALLOC and needs BLOBLIST_FIXED so
> > > if you make ALLOC the default you need to change the default for snow.
> >
> > Simon by snow do you mean the device (configs/snow_defconfig) snow, I
> > think Patrick doesn't know you're referring to what I believe to be a
> > device config.
>
> Oh OK, yes that is what I mean. If it is too confusing I can send a
> fix-up patch after this series is applied.
>
Oh OK, got it.
I wasn't aware that BLOBLIST is already used on some ARM devices.
I'll send an updated version.
Is it possible to migrate those to BLOBLIST_ALLOC? Any reason they
would use a fixed address?

> Regards,
> SImon

Re: [PATCH v9 24/37] common: Enable BLOBLIST_TABLES on arm

[Simon Glass]

Hi Patrick,

On Tue, 22 Oct 2024 at 18:18, Patrick Rudolph
<patrick.rudolph@9elements.com> wrote:
>
> Hi Simon,
> On Tue, Oct 22, 2024 at 2:16 PM Simon Glass <sjg@chromium.org> wrote:
> >
> > Hi Peter,
> >
> > On Mon, 21 Oct 2024 at 19:57, Peter Robinson <pbrobinson@gmail.com> wrote:
> > >
> > > > > > > Allow to use BLOBLIST_TABLES on arm to store ACPI or other tables.
> > > > > > >
> > > > > > > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > > > > > > Cc: Tom Rini <trini@konsulko.com>
> > > > > > > ---
> > > > > > > Changelog v9:
> > > > > > > - default to BLOBLIST_ALLOC on arm
> > > > > > > - Move default for BLOBLIST_SIZE_RELOC up
> > > > > > > ---
> > > > > > >  common/Kconfig |  2 ++
> > > > > > >  lib/Kconfig    | 15 +++++++++------
> > > > > > >  2 files changed, 11 insertions(+), 6 deletions(-)
> > > > > > >
> > > > > >
> > > > > > This is fine, but please disable it for snow since it needs the FIXED
> > > > > > option for now.
> > > > >
> > > > > I cannot follow. What needs the FIXED option and what to disable?
> > > > > I run this patch on the CI and test_py_sandbox tests are still working.
> > > >
> > > > I mean that snow cannot use BLOBLIST_ALLOC and needs BLOBLIST_FIXED so
> > > > if you make ALLOC the default you need to change the default for snow.
> > >
> > > Simon by snow do you mean the device (configs/snow_defconfig) snow, I
> > > think Patrick doesn't know you're referring to what I believe to be a
> > > device config.
> >
> > Oh OK, yes that is what I mean. If it is too confusing I can send a
> > fix-up patch after this series is applied.
> >
> Oh OK, got it.
> I wasn't aware that BLOBLIST is already used on some ARM devices.
> I'll send an updated version.
> Is it possible to migrate those to BLOBLIST_ALLOC? Any reason they
> would use a fixed address?

Not easily, since it puts the table in SRAM. But it would be possible
to migrate snow to use the handle protocol.

Regards,
Simon