Re: [PATCH v3 4/6] soc: fsl: qe: Add support of IRQ in QE GPIO

[Bartosz Golaszewski <brgl@bgdev.pl>]

On Mon, Aug 25, 2025 at 8:53 AM Christophe Leroy
<christophe.leroy@csgroup.eu> wrote:
>
> In the QE, a few GPIOs are IRQ capable. Similarly to
> commit 726bd223105c ("powerpc/8xx: Adding support of IRQ in MPC8xx
> GPIO"), add IRQ support to QE GPIO.
>
> Add property 'fsl,qe-gpio-irq-mask' similar to
> 'fsl,cpm1-gpio-irq-mask' that define which of the GPIOs have IRQs.
>
> Here is an exemple for port B of mpc8323 which has IRQs for
> GPIOs PB7, PB9, PB25 and PB27.
>
>         qe_pio_b: gpio-controller@1418 {
>                 compatible = "fsl,mpc8323-qe-pario-bank";
>                 reg = <0x1418 0x18>;
>                 interrupts = <4 5 6 7>;
>                 interrupt-parent = <&qepic>;
>                 gpio-controller;
>                 #gpio-cells = <2>;
>                 fsl,qe-gpio-irq-mask = <0x01400050>;
>         };
>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
>  drivers/soc/fsl/qe/gpio.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>
> diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
> index a338469cebe4..91d469403126 100644
> --- a/drivers/soc/fsl/qe/gpio.c
> +++ b/drivers/soc/fsl/qe/gpio.c
> @@ -13,6 +13,7 @@
>  #include <linux/err.h>
>  #include <linux/io.h>
>  #include <linux/of.h>
> +#include <linux/of_irq.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/gpio/driver.h>
>  #include <linux/slab.h>
> @@ -32,6 +33,8 @@ struct qe_gpio_chip {
>
>         /* saved_regs used to restore dedicated functions */
>         struct qe_pio_regs saved_regs;
> +
> +       int irq[32];
>  };
>
>  static void qe_gpio_save_regs(struct qe_gpio_chip *qe_gc)
> @@ -135,6 +138,13 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
>         return 0;
>  }
>
> +static int qe_gpio_to_irq(struct gpio_chip *gc, unsigned int gpio)
> +{
> +       struct qe_gpio_chip *qe_gc = gpiochip_get_data(gc);
> +
> +       return qe_gc->irq[gpio] ? : -ENXIO;
> +}
> +
>  struct qe_pin {
>         /*
>          * The qe_gpio_chip name is unfortunate, we should change that to
> @@ -295,6 +305,7 @@ static int qe_gpio_probe(struct platform_device *ofdev)
>         struct device_node *np = dev->of_node;
>         struct qe_gpio_chip *qe_gc;
>         struct gpio_chip *gc;
> +       u32 mask;
>
>         qe_gc = devm_kzalloc(dev, sizeof(*qe_gc), GFP_KERNEL);
>         if (!qe_gc)
> @@ -302,6 +313,14 @@ static int qe_gpio_probe(struct platform_device *ofdev)
>
>         spin_lock_init(&qe_gc->lock);
>
> +       if (!of_property_read_u32(np, "fsl,qe-gpio-irq-mask", &mask)) {

Please use device_property_read_u32 and stop including of.h if
possible (it seems it is upon visual inspection).

Bart

> +               int i, j;
> +
> +               for (i = 0, j = 0; i < ARRAY_SIZE(qe_gc->irq); i++)
> +                       if (mask & (1 << (31 - i)))
> +                               qe_gc->irq[i] = irq_of_parse_and_map(np, j++);
> +       }
> +
>         gc = &qe_gc->gc;
>
>         gc->base = -1;
> @@ -311,6 +330,7 @@ static int qe_gpio_probe(struct platform_device *ofdev)
>         gc->get = qe_gpio_get;
>         gc->set = qe_gpio_set;
>         gc->set_multiple = qe_gpio_set_multiple;
> +       gc->to_irq = qe_gpio_to_irq;
>         gc->parent = dev;
>         gc->owner = THIS_MODULE;
>
> --
> 2.49.0
>