[PATCH v10 01/10] dt-bindings: serial: Added secondary clock for RZ/T2H RSCI

[PATCH v10 01/10] dt-bindings: serial: Added secondary clock for RZ/T2H RSCI

[Thierry Bultel]

At boot, the default clock is the PCLKM core clock (synchronous
clock, which is enabled by the bootloader).
For different baudrates, the asynchronous clock input must be used.
Clock selection is made by an internal register of RCSI.

Add the optional "sck", external clock input.

Also remove the unneeded serial0 alias from the dts example.

Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v9->v10:
 - mention sck in description
 - no maxItems on clock-names
 - fixed the #include dependency in dts example
Changes v8->v9:
 - typo in description
 - named clocks 'operational' and 'bus', and added optional 'sck' clock
 - uses value of 2nd core clock in example to break the dependency on cpg patch
---
 .../bindings/serial/renesas,rsci.yaml           | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
index ea879db5f485..1bf255407df0 100644
--- a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
@@ -35,10 +35,15 @@ properties:
       - const: tei
 
   clocks:
-    maxItems: 1
+    minItems: 2
+    maxItems: 3
 
   clock-names:
-    const: fck # UART functional clock
+    minItems: 2
+    items:
+      - const: operation
+      - const: bus
+      - const: sck # optional external clock input
 
   power-domains:
     maxItems: 1
@@ -60,10 +65,6 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/renesas-cpg-mssr.h>
 
-    aliases {
-        serial0 = &sci0;
-    };
-
     sci0: serial@80005000 {
         compatible = "renesas,r9a09g077-rsci";
         reg = <0x80005000 0x400>;
@@ -72,7 +73,7 @@ examples:
                      <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
                      <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
         interrupt-names = "eri", "rxi", "txi", "tei";
-        clocks = <&cpg CPG_MOD 108>;
-        clock-names = "fck";
+        clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE 13>;
+        clock-names = "operation", "bus";
         power-domains = <&cpg>;
     };
-- 
2.43.0

[PATCH v10 02/10] dt-bindings: clock: Add cpg for the Renesas RZ/T2H SoC

[Thierry Bultel]

Document RZ/T2H (a.k.a r9a09g077) cpg-mssr (Clock Pulse Generator) binding.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v9->v10:
  - Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Changes v8->v9:
  - keep clock names in generic section because T2H is a subset
  - removed R9A09G077_CLK_BSC, to only keep R9A09G077_CLK_CKIO
  - removed R9A09G077_MSTP* macros and module clocks definitions
Changes v7->v8:
  - extra parenthesis
  - added loco
  - renesas-cpg-mssr.h: removed unused clocks, added a macro for mstp
Changes v6->v7:
  - Add description for reg property
Changes v5->v6:
  - Set clock minItem constraint
  - Moved additionalProperties after 'allOf' section
Changes v4->v5:
  - Set reg minItems and maxItems defaults at top level
Changes v3->v4:
  - Handle maxItems and clocks names properly in schema. 
---
 .../bindings/clock/renesas,cpg-mssr.yaml      | 46 ++++++++++++++-----
 .../clock/renesas,r9a09g077-cpg-mssr.h        | 27 +++++++++++
 2 files changed, 62 insertions(+), 11 deletions(-)
 create mode 100644 include/dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h

diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
index 77ce3615c65a..708ab6bd7d44 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -52,9 +52,15 @@ properties:
       - renesas,r8a779f0-cpg-mssr # R-Car S4-8
       - renesas,r8a779g0-cpg-mssr # R-Car V4H
       - renesas,r8a779h0-cpg-mssr # R-Car V4M
+      - renesas,r9a09g077-cpg-mssr # RZ/T2H
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: base address of register block 0
+      - description: base address of register block 1
+    description: base addresses of clock controller. Some controllers
+      (like r9a09g077) use two blocks instead of a single one.
 
   clocks:
     minItems: 1
@@ -92,16 +98,6 @@ properties:
       the datasheet.
     const: 1
 
-if:
-  not:
-    properties:
-      compatible:
-        items:
-          enum:
-            - renesas,r7s9210-cpg-mssr
-then:
-  required:
-    - '#reset-cells'
 
 required:
   - compatible
@@ -111,6 +107,34 @@ required:
   - '#clock-cells'
   - '#power-domain-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g077-cpg-mssr
+    then:
+      properties:
+        reg:
+          minItems: 2
+        clock-names:
+          items:
+            - const: extal
+    else:
+      properties:
+        reg:
+          maxItems: 1
+  - if:
+      not:
+        properties:
+          compatible:
+            items:
+              enum:
+                - renesas,r7s9210-cpg-mssr
+    then:
+      required:
+        - '#reset-cells'
+
 additionalProperties: false
 
 examples:
diff --git a/include/dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h b/include/dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h
new file mode 100644
index 000000000000..1b22fe88dec7
--- /dev/null
+++ b/include/dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_RENESAS_R9A09G077_CPG_H__
+#define __DT_BINDINGS_CLOCK_RENESAS_R9A09G077_CPG_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* R9A09G077 CPG Core Clocks */
+#define R9A09G077_CLK_CA55C0		0
+#define R9A09G077_CLK_CA55C1		1
+#define R9A09G077_CLK_CA55C2		2
+#define R9A09G077_CLK_CA55C3		3
+#define R9A09G077_CLK_CA55S		4
+#define R9A09G077_CLK_CR52_CPU0		5
+#define R9A09G077_CLK_CR52_CPU1		6
+#define R9A09G077_CLK_CKIO		7
+#define R9A09G077_CLK_PCLKAH		8
+#define R9A09G077_CLK_PCLKAM		9
+#define R9A09G077_CLK_PCLKAL		10
+#define R9A09G077_CLK_PCLKGPTL		11
+#define R9A09G077_CLK_PCLKH		12
+#define R9A09G077_CLK_PCLKM		13
+
+#endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G077_CPG_H__ */
-- 
2.43.0

[PATCH v10 03/10] soc: renesas: Add RZ/T2H (R9A09G077) config option

[Thierry Bultel]

Add a configuration option for the RZ/T2H SoC.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v10->v11: none
Changes v8->v9: none
Changes v7->v8: none
Changes v6->v7: none
Changes v5->v6: none
Changes v4->v5: none
Changes v3->v4:
  - Sets ARCH_R9A09G077 to Y by default.
---
 drivers/soc/renesas/Kconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index fbc3b69d21a7..7f4b4088a14e 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -408,6 +408,12 @@ config ARCH_R9A09G057
 	help
 	  This enables support for the Renesas RZ/V2H(P) SoC variants.
 
+config ARCH_R9A09G077
+	bool "ARM64 Platform support for RZ/T2H"
+	default y if ARCH_RENESAS
+	help
+	  This enables support for the Renesas RZ/T2H SoC variants.
+
 endif # ARM64
 
 if RISCV
-- 
2.43.0

[PATCH v10 04/10] clk: renesas: Pass sub struct of cpg_mssr_priv to cpg_clk_register

[Thierry Bultel]

In a subsequent patch, the registration callback will need more parameters
from cpg_mssr_priv (like another base address with clock controllers
with double register block, and also, notifiers and rmw_lock).
Instead of adding more parameters, move the needed parameters to a public
sub-struct.
Instead moving clks to this structure, which would have implied to add
an allocation (and cleanup) for it, keep the way the allocation is done
and just have a copy of the pointer in the public structure.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v9->v10: none
Changes v8->v9: rebase on linux-next
Changes v7->v8:
 - moved struct cpg_mssr_pub pub to the beginning of struct cpg_mssr_priv
 - make *core & *info fit on the same line
 - order of doc tags
Changes v6->v7: none
Changes v5->v6: none
Changes v4->v5: none
Changes v3->v4: none
---
 drivers/clk/renesas/r7s9210-cpg-mssr.c  |  7 +-
 drivers/clk/renesas/r8a77970-cpg-mssr.c |  8 +-
 drivers/clk/renesas/rcar-gen2-cpg.c     |  5 +-
 drivers/clk/renesas/rcar-gen2-cpg.h     |  3 +-
 drivers/clk/renesas/rcar-gen3-cpg.c     |  6 +-
 drivers/clk/renesas/rcar-gen3-cpg.h     |  3 +-
 drivers/clk/renesas/rcar-gen4-cpg.c     |  6 +-
 drivers/clk/renesas/rcar-gen4-cpg.h     |  3 +-
 drivers/clk/renesas/renesas-cpg-mssr.c  | 98 ++++++++++++-------------
 drivers/clk/renesas/renesas-cpg-mssr.h  | 20 ++++-
 10 files changed, 88 insertions(+), 71 deletions(-)

diff --git a/drivers/clk/renesas/r7s9210-cpg-mssr.c b/drivers/clk/renesas/r7s9210-cpg-mssr.c
index e1812867a6da..a8ed87c11ba1 100644
--- a/drivers/clk/renesas/r7s9210-cpg-mssr.c
+++ b/drivers/clk/renesas/r7s9210-cpg-mssr.c
@@ -159,12 +159,13 @@ static void __init r7s9210_update_clk_table(struct clk *extal_clk,
 
 static struct clk * __init rza2_cpg_clk_register(struct device *dev,
 	const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
-	struct clk **clks, void __iomem *base,
-	struct raw_notifier_head *notifiers)
+	struct cpg_mssr_pub *pub)
 {
-	struct clk *parent;
+	void __iomem *base = pub->base0;
+	struct clk **clks = pub->clks;
 	unsigned int mult = 1;
 	unsigned int div = 1;
+	struct clk *parent;
 
 	parent = clks[core->parent];
 	if (IS_ERR(parent))
diff --git a/drivers/clk/renesas/r8a77970-cpg-mssr.c b/drivers/clk/renesas/r8a77970-cpg-mssr.c
index 3cec0f501b94..e2bda2c10730 100644
--- a/drivers/clk/renesas/r8a77970-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77970-cpg-mssr.c
@@ -219,10 +219,11 @@ static int __init r8a77970_cpg_mssr_init(struct device *dev)
 
 static struct clk * __init r8a77970_cpg_clk_register(struct device *dev,
 	const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
-	struct clk **clks, void __iomem *base,
-	struct raw_notifier_head *notifiers)
+	struct cpg_mssr_pub *pub)
 {
 	const struct clk_div_table *table;
+	void __iomem *base = pub->base0;
+	struct clk **clks = pub->clks;
 	const struct clk *parent;
 	unsigned int shift;
 
@@ -236,8 +237,7 @@ static struct clk * __init r8a77970_cpg_clk_register(struct device *dev,
 		shift = 4;
 		break;
 	default:
-		return rcar_gen3_cpg_clk_register(dev, core, info, clks, base,
-						  notifiers);
+		return rcar_gen3_cpg_clk_register(dev, core, info, pub);
 	}
 
 	parent = clks[core->parent];
diff --git a/drivers/clk/renesas/rcar-gen2-cpg.c b/drivers/clk/renesas/rcar-gen2-cpg.c
index 4c3764972bad..ab34bb8c3e07 100644
--- a/drivers/clk/renesas/rcar-gen2-cpg.c
+++ b/drivers/clk/renesas/rcar-gen2-cpg.c
@@ -274,10 +274,11 @@ static const struct soc_device_attribute cpg_quirks_match[] __initconst = {
 
 struct clk * __init rcar_gen2_cpg_clk_register(struct device *dev,
 	const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
-	struct clk **clks, void __iomem *base,
-	struct raw_notifier_head *notifiers)
+	struct cpg_mssr_pub *pub)
 {
 	const struct clk_div_table *table = NULL;
+	void __iomem *base = pub->base0;
+	struct clk **clks = pub->clks;
 	const struct clk *parent;
 	const char *parent_name;
 	unsigned int mult = 1;
diff --git a/drivers/clk/renesas/rcar-gen2-cpg.h b/drivers/clk/renesas/rcar-gen2-cpg.h
index bdcd4a38d48d..3d4b127fdeaf 100644
--- a/drivers/clk/renesas/rcar-gen2-cpg.h
+++ b/drivers/clk/renesas/rcar-gen2-cpg.h
@@ -32,8 +32,7 @@ struct rcar_gen2_cpg_pll_config {
 
 struct clk *rcar_gen2_cpg_clk_register(struct device *dev,
 	const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
-	struct clk **clks, void __iomem *base,
-	struct raw_notifier_head *notifiers);
+	struct cpg_mssr_pub *pub);
 int rcar_gen2_cpg_init(const struct rcar_gen2_cpg_pll_config *config,
 		       unsigned int pll0_div, u32 mode);
 
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index 027100e84ee4..10ae20489df9 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -345,9 +345,11 @@ static const struct soc_device_attribute cpg_quirks_match[] __initconst = {
 
 struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 	const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
-	struct clk **clks, void __iomem *base,
-	struct raw_notifier_head *notifiers)
+	struct cpg_mssr_pub *pub)
 {
+	struct raw_notifier_head *notifiers = &pub->notifiers;
+	void __iomem *base = pub->base0;
+	struct clk **clks = pub->clks;
 	const struct clk *parent;
 	unsigned int mult = 1;
 	unsigned int div = 1;
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.h b/drivers/clk/renesas/rcar-gen3-cpg.h
index bfdc649bdf12..d15a5d1df71c 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.h
+++ b/drivers/clk/renesas/rcar-gen3-cpg.h
@@ -81,8 +81,7 @@ struct rcar_gen3_cpg_pll_config {
 
 struct clk *rcar_gen3_cpg_clk_register(struct device *dev,
 	const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
-	struct clk **clks, void __iomem *base,
-	struct raw_notifier_head *notifiers);
+	struct cpg_mssr_pub *pub);
 int rcar_gen3_cpg_init(const struct rcar_gen3_cpg_pll_config *config,
 		       unsigned int clk_extalr, u32 mode);
 
diff --git a/drivers/clk/renesas/rcar-gen4-cpg.c b/drivers/clk/renesas/rcar-gen4-cpg.c
index 31aa790fd003..fb9a876aaba5 100644
--- a/drivers/clk/renesas/rcar-gen4-cpg.c
+++ b/drivers/clk/renesas/rcar-gen4-cpg.c
@@ -418,9 +418,11 @@ static const struct clk_div_table cpg_rpcsrc_div_table[] = {
 
 struct clk * __init rcar_gen4_cpg_clk_register(struct device *dev,
 	const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
-	struct clk **clks, void __iomem *base,
-	struct raw_notifier_head *notifiers)
+	struct cpg_mssr_pub *pub)
 {
+	struct raw_notifier_head *notifiers = &pub->notifiers;
+	void __iomem *base = pub->base0;
+	struct clk **clks = pub->clks;
 	const struct clk *parent;
 	unsigned int mult = 1;
 	unsigned int div = 1;
diff --git a/drivers/clk/renesas/rcar-gen4-cpg.h b/drivers/clk/renesas/rcar-gen4-cpg.h
index 717fd148464f..6c8280b37c37 100644
--- a/drivers/clk/renesas/rcar-gen4-cpg.h
+++ b/drivers/clk/renesas/rcar-gen4-cpg.h
@@ -78,8 +78,7 @@ struct rcar_gen4_cpg_pll_config {
 
 struct clk *rcar_gen4_cpg_clk_register(struct device *dev,
 	const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
-	struct clk **clks, void __iomem *base,
-	struct raw_notifier_head *notifiers);
+	struct cpg_mssr_pub *pub);
 int rcar_gen4_cpg_init(const struct rcar_gen4_cpg_pll_config *config,
 		       unsigned int clk_extalr, u32 mode);
 
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index 71431970d6e6..f102a1dd9694 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -126,16 +126,14 @@ static const u16 srstclr_for_gen4[] = {
  * struct cpg_mssr_priv - Clock Pulse Generator / Module Standby
  *                        and Software Reset Private Data
  *
+ * @pub: Data passed to clock registration callback
  * @rcdev: Optional reset controller entity
  * @dev: CPG/MSSR device
- * @base: CPG/MSSR register block base address
  * @reg_layout: CPG/MSSR register layout
- * @rmw_lock: protects RMW register accesses
  * @np: Device node in DT for this CPG/MSSR module
  * @num_core_clks: Number of Core Clocks in clks[]
  * @num_mod_clks: Number of Module Clocks in clks[]
  * @last_dt_core_clk: ID of the last Core Clock exported to DT
- * @notifiers: Notifier chain to save/restore clock state for system resume
  * @status_regs: Pointer to status registers array
  * @control_regs: Pointer to control registers array
  * @reset_regs: Pointer to reset registers array
@@ -147,20 +145,18 @@ static const u16 srstclr_for_gen4[] = {
  * @clks: Array containing all Core and Module Clocks
  */
 struct cpg_mssr_priv {
+	struct cpg_mssr_pub pub;
 #ifdef CONFIG_RESET_CONTROLLER
 	struct reset_controller_dev rcdev;
 #endif
 	struct device *dev;
-	void __iomem *base;
 	enum clk_reg_layout reg_layout;
-	spinlock_t rmw_lock;
 	struct device_node *np;
 
 	unsigned int num_core_clks;
 	unsigned int num_mod_clks;
 	unsigned int last_dt_core_clk;
 
-	struct raw_notifier_head notifiers;
 	const u16 *status_regs;
 	const u16 *control_regs;
 	const u16 *reset_regs;
@@ -206,38 +202,39 @@ static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
 
 	dev_dbg(dev, "MSTP %u%02u/%pC %s\n", reg, bit, hw->clk,
 		str_on_off(enable));
-	spin_lock_irqsave(&priv->rmw_lock, flags);
+	spin_lock_irqsave(&priv->pub.rmw_lock, flags);
 
 	if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A) {
-		value = readb(priv->base + priv->control_regs[reg]);
+		value = readb(priv->pub.base0 + priv->control_regs[reg]);
 		if (enable)
 			value &= ~bitmask;
 		else
 			value |= bitmask;
-		writeb(value, priv->base + priv->control_regs[reg]);
+		writeb(value, priv->pub.base0 + priv->control_regs[reg]);
 
 		/* dummy read to ensure write has completed */
-		readb(priv->base + priv->control_regs[reg]);
-		barrier_data(priv->base + priv->control_regs[reg]);
+		readb(priv->pub.base0 + priv->control_regs[reg]);
+		barrier_data(priv->pub.base0 + priv->control_regs[reg]);
+
 	} else {
-		value = readl(priv->base + priv->control_regs[reg]);
+		value = readl(priv->pub.base0 + priv->control_regs[reg]);
 		if (enable)
 			value &= ~bitmask;
 		else
 			value |= bitmask;
-		writel(value, priv->base + priv->control_regs[reg]);
+		writel(value, priv->pub.base0 + priv->control_regs[reg]);
 	}
 
-	spin_unlock_irqrestore(&priv->rmw_lock, flags);
+	spin_unlock_irqrestore(&priv->pub.rmw_lock, flags);
 
 	if (!enable || priv->reg_layout == CLK_REG_LAYOUT_RZ_A)
 		return 0;
 
-	error = readl_poll_timeout_atomic(priv->base + priv->status_regs[reg],
+	error = readl_poll_timeout_atomic(priv->pub.base0 + priv->status_regs[reg],
 					  value, !(value & bitmask), 0, 10);
 	if (error)
 		dev_err(dev, "Failed to enable SMSTP %p[%d]\n",
-			priv->base + priv->control_regs[reg], bit);
+			priv->pub.base0 + priv->control_regs[reg], bit);
 
 	return error;
 }
@@ -256,12 +253,13 @@ static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
 {
 	struct mstp_clock *clock = to_mstp_clock(hw);
 	struct cpg_mssr_priv *priv = clock->priv;
+	unsigned int reg = clock->index / 32;
 	u32 value;
 
 	if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A)
-		value = readb(priv->base + priv->control_regs[clock->index / 32]);
+		value = readb(priv->pub.base0 + priv->control_regs[reg]);
 	else
-		value = readl(priv->base + priv->status_regs[clock->index / 32]);
+		value = readl(priv->pub.base0 + priv->status_regs[reg]);
 
 	return !(value & BIT(clock->index % 32));
 }
@@ -348,7 +346,7 @@ static void __init cpg_mssr_register_core_clk(const struct cpg_core_clk *core,
 	case CLK_TYPE_DIV6P1:
 	case CLK_TYPE_DIV6_RO:
 		WARN_DEBUG(core->parent >= priv->num_core_clks);
-		parent = priv->clks[core->parent];
+		parent = priv->pub.clks[core->parent];
 		if (IS_ERR(parent)) {
 			clk = parent;
 			goto fail;
@@ -358,12 +356,12 @@ static void __init cpg_mssr_register_core_clk(const struct cpg_core_clk *core,
 
 		if (core->type == CLK_TYPE_DIV6_RO)
 			/* Multiply with the DIV6 register value */
-			div *= (readl(priv->base + core->offset) & 0x3f) + 1;
+			div *= (readl(priv->pub.base0 + core->offset) & 0x3f) + 1;
 
 		if (core->type == CLK_TYPE_DIV6P1) {
 			clk = cpg_div6_register(core->name, 1, &parent_name,
-						priv->base + core->offset,
-						&priv->notifiers);
+						priv->pub.base0 + core->offset,
+						&priv->pub.notifiers);
 		} else {
 			clk = clk_register_fixed_factor(NULL, core->name,
 							parent_name, 0,
@@ -379,8 +377,7 @@ static void __init cpg_mssr_register_core_clk(const struct cpg_core_clk *core,
 	default:
 		if (info->cpg_clk_register)
 			clk = info->cpg_clk_register(dev, core, info,
-						     priv->clks, priv->base,
-						     &priv->notifiers);
+						     &priv->pub);
 		else
 			dev_err(dev, "%s has unsupported core clock type %u\n",
 				core->name, core->type);
@@ -391,7 +388,7 @@ static void __init cpg_mssr_register_core_clk(const struct cpg_core_clk *core,
 		goto fail;
 
 	dev_dbg(dev, "Core clock %pC at %lu Hz\n", clk, clk_get_rate(clk));
-	priv->clks[id] = clk;
+	priv->pub.clks[id] = clk;
 	return;
 
 fail:
@@ -414,14 +411,14 @@ static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod,
 	WARN_DEBUG(id < priv->num_core_clks);
 	WARN_DEBUG(id >= priv->num_core_clks + priv->num_mod_clks);
 	WARN_DEBUG(mod->parent >= priv->num_core_clks + priv->num_mod_clks);
-	WARN_DEBUG(PTR_ERR(priv->clks[id]) != -ENOENT);
+	WARN_DEBUG(PTR_ERR(priv->pub.clks[id]) != -ENOENT);
 
 	if (!mod->name) {
 		/* Skip NULLified clock */
 		return;
 	}
 
-	parent = priv->clks[mod->parent];
+	parent = priv->pub.clks[mod->parent];
 	if (IS_ERR(parent)) {
 		clk = parent;
 		goto fail;
@@ -623,13 +620,13 @@ static int cpg_mssr_reset(struct reset_controller_dev *rcdev,
 	dev_dbg(priv->dev, "reset %u%02u\n", reg, bit);
 
 	/* Reset module */
-	writel(bitmask, priv->base + priv->reset_regs[reg]);
+	writel(bitmask, priv->pub.base0 + priv->reset_regs[reg]);
 
 	/* Wait for at least one cycle of the RCLK clock (@ ca. 32 kHz) */
 	udelay(35);
 
 	/* Release module from reset state */
-	writel(bitmask, priv->base + priv->reset_clear_regs[reg]);
+	writel(bitmask, priv->pub.base0 + priv->reset_clear_regs[reg]);
 
 	return 0;
 }
@@ -643,7 +640,7 @@ static int cpg_mssr_assert(struct reset_controller_dev *rcdev, unsigned long id)
 
 	dev_dbg(priv->dev, "assert %u%02u\n", reg, bit);
 
-	writel(bitmask, priv->base + priv->reset_regs[reg]);
+	writel(bitmask, priv->pub.base0 + priv->reset_regs[reg]);
 	return 0;
 }
 
@@ -657,7 +654,7 @@ static int cpg_mssr_deassert(struct reset_controller_dev *rcdev,
 
 	dev_dbg(priv->dev, "deassert %u%02u\n", reg, bit);
 
-	writel(bitmask, priv->base + priv->reset_clear_regs[reg]);
+	writel(bitmask, priv->pub.base0 + priv->reset_clear_regs[reg]);
 	return 0;
 }
 
@@ -669,7 +666,7 @@ static int cpg_mssr_status(struct reset_controller_dev *rcdev,
 	unsigned int bit = id % 32;
 	u32 bitmask = BIT(bit);
 
-	return !!(readl(priv->base + priv->reset_regs[reg]) & bitmask);
+	return !!(readl(priv->pub.base0 + priv->reset_regs[reg]) & bitmask);
 }
 
 static const struct reset_control_ops cpg_mssr_reset_ops = {
@@ -895,12 +892,12 @@ static int cpg_mssr_suspend_noirq(struct device *dev)
 		if (priv->smstpcr_saved[reg].mask)
 			priv->smstpcr_saved[reg].val =
 				priv->reg_layout == CLK_REG_LAYOUT_RZ_A ?
-				readb(priv->base + priv->control_regs[reg]) :
-				readl(priv->base + priv->control_regs[reg]);
+				readb(priv->pub.base0 + priv->control_regs[reg]) :
+				readl(priv->pub.base0 + priv->control_regs[reg]);
 	}
 
 	/* Save core clocks */
-	raw_notifier_call_chain(&priv->notifiers, PM_EVENT_SUSPEND, NULL);
+	raw_notifier_call_chain(&priv->pub.notifiers, PM_EVENT_SUSPEND, NULL);
 
 	return 0;
 }
@@ -917,7 +914,7 @@ static int cpg_mssr_resume_noirq(struct device *dev)
 		return 0;
 
 	/* Restore core clocks */
-	raw_notifier_call_chain(&priv->notifiers, PM_EVENT_RESUME, NULL);
+	raw_notifier_call_chain(&priv->pub.notifiers, PM_EVENT_RESUME, NULL);
 
 	/* Restore module clocks */
 	for (reg = 0; reg < ARRAY_SIZE(priv->smstpcr_saved); reg++) {
@@ -926,29 +923,29 @@ static int cpg_mssr_resume_noirq(struct device *dev)
 			continue;
 
 		if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A)
-			oldval = readb(priv->base + priv->control_regs[reg]);
+			oldval = readb(priv->pub.base0 + priv->control_regs[reg]);
 		else
-			oldval = readl(priv->base + priv->control_regs[reg]);
+			oldval = readl(priv->pub.base0 + priv->control_regs[reg]);
 		newval = oldval & ~mask;
 		newval |= priv->smstpcr_saved[reg].val & mask;
 		if (newval == oldval)
 			continue;
 
 		if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A) {
-			writeb(newval, priv->base + priv->control_regs[reg]);
+			writeb(newval, priv->pub.base0 + priv->control_regs[reg]);
 			/* dummy read to ensure write has completed */
-			readb(priv->base + priv->control_regs[reg]);
-			barrier_data(priv->base + priv->control_regs[reg]);
+			readb(priv->pub.base0 + priv->control_regs[reg]);
+			barrier_data(priv->pub.base0 + priv->control_regs[reg]);
 			continue;
 		} else
-			writel(newval, priv->base + priv->control_regs[reg]);
+			writel(newval, priv->pub.base0 + priv->control_regs[reg]);
 
 		/* Wait until enabled clocks are really enabled */
 		mask &= ~priv->smstpcr_saved[reg].val;
 		if (!mask)
 			continue;
 
-		error = readl_poll_timeout_atomic(priv->base + priv->status_regs[reg],
+		error = readl_poll_timeout_atomic(priv->pub.base0 + priv->status_regs[reg],
 						oldval, !(oldval & mask), 0, 10);
 		if (error)
 			dev_warn(dev, "Failed to enable SMSTP%u[0x%x]\n", reg,
@@ -1058,12 +1055,13 @@ static int __init cpg_mssr_common_init(struct device *dev,
 	if (!priv)
 		return -ENOMEM;
 
+	priv->pub.clks = priv->clks;
 	priv->np = np;
 	priv->dev = dev;
-	spin_lock_init(&priv->rmw_lock);
+	spin_lock_init(&priv->pub.rmw_lock);
 
-	priv->base = of_iomap(np, 0);
-	if (!priv->base) {
+	priv->pub.base0 = of_iomap(np, 0);
+	if (!priv->pub.base0) {
 		error = -ENOMEM;
 		goto out_err;
 	}
@@ -1071,7 +1069,7 @@ static int __init cpg_mssr_common_init(struct device *dev,
 	priv->num_core_clks = info->num_total_core_clks;
 	priv->num_mod_clks = info->num_hw_mod_clks;
 	priv->last_dt_core_clk = info->last_dt_core_clk;
-	RAW_INIT_NOTIFIER_HEAD(&priv->notifiers);
+	RAW_INIT_NOTIFIER_HEAD(&priv->pub.notifiers);
 	priv->reg_layout = info->reg_layout;
 	if (priv->reg_layout == CLK_REG_LAYOUT_RCAR_GEN2_AND_GEN3) {
 		priv->status_regs = mstpsr;
@@ -1091,7 +1089,7 @@ static int __init cpg_mssr_common_init(struct device *dev,
 	}
 
 	for (i = 0; i < nclks; i++)
-		priv->clks[i] = ERR_PTR(-ENOENT);
+		priv->pub.clks[i] = ERR_PTR(-ENOENT);
 
 	error = cpg_mssr_reserved_init(priv, info);
 	if (error)
@@ -1108,8 +1106,8 @@ static int __init cpg_mssr_common_init(struct device *dev,
 reserve_err:
 	cpg_mssr_reserved_exit(priv);
 out_err:
-	if (priv->base)
-		iounmap(priv->base);
+	if (priv->pub.base0)
+		iounmap(priv->pub.base0);
 	kfree(priv);
 
 	return error;
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.h b/drivers/clk/renesas/renesas-cpg-mssr.h
index a1d6e0cbcff9..7ce3cc9a64c1 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.h
+++ b/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -8,6 +8,8 @@
 #ifndef __CLK_RENESAS_CPG_MSSR_H__
 #define __CLK_RENESAS_CPG_MSSR_H__
 
+#include <linux/notifier.h>
+
     /*
      * Definitions of CPG Core Clocks
      *
@@ -29,6 +31,21 @@ struct cpg_core_clk {
 	unsigned int offset;
 };
 
+/**
+ * struct cpg_mssr_pub - data shared with device-specific clk registration code
+ *
+ * @base0: CPG/MSSR register block base0 address
+ * @notifiers: Notifier chain to save/restore clock state for system resume
+ * @rmw_lock: protects RMW register accesses
+ * @clks: pointer to clocks
+ */
+struct cpg_mssr_pub {
+	void __iomem *base0;
+	struct raw_notifier_head notifiers;
+	spinlock_t rmw_lock;
+	struct clk **clks;
+};
+
 enum clk_types {
 	/* Generic */
 	CLK_TYPE_IN,		/* External Clock Input */
@@ -153,8 +170,7 @@ struct cpg_mssr_info {
 	struct clk *(*cpg_clk_register)(struct device *dev,
 					const struct cpg_core_clk *core,
 					const struct cpg_mssr_info *info,
-					struct clk **clks, void __iomem *base,
-					struct raw_notifier_head *notifiers);
+					struct cpg_mssr_pub *pub);
 };
 
 extern const struct cpg_mssr_info r7s9210_cpg_mssr_info;
-- 
2.43.0

[PATCH v10 05/10] clk: renesas: Add support for R9A09G077 SoC

[Thierry Bultel]

RZ/T2H has 2 register blocks at different addresses.

The clock tree has configurable dividers and mux selectors.
Add these new clock types, new register layout type, and
registration code for mux and div in registration callback.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v9->v10:
 - Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Changes v8->v9:
 - Renamed r9a09g077-cpg-mssr.c to r9a09g077-cpg.c
 - Makefile: keep alphabetical order
 - Fixed DIVSCI0ASYNC
 - Removed unused CLK_MAIN
 - Simplified the clock tree, removing CLK_SEL_PLL0, CLK_SEL_PLL1 & CLK_SEL_PLL4
 - Renamed loco to .loco
 - Fixed the register bits in dtable_24_25_30_32, re-ordered the table
 - DEF_DIV & DEF_MUX: set flag to zero always (might change in a future commit)
 - Do not set CLK_DIVIDER_HIWORD_MASK
 - Uses '8' as value of removed R9A09G077_PCLK_SCI0 definition
 - Fixed addr calculation with RZT2H_REG_OFFSET in r9a09g077_cpg_clk_register
 - struct cpg_core_clk: moved union in specific section
 - Renamed cpg_read_rzt2h_mstp to cpg_rzt2h_mstp_read
 - Renamed cpg_write_rzt2h_mstp to cpg_rzt2h_mstp_write
Changes v7->v8:
 - Makefile: keep ordered list
 - r9a09g077-cpg-mssr.c: use high bit instead of sel_base,
   same macro for DIV and MUX
 - removed unused clocks
 - CLK_LOCO is internal with a DEF_RATE definition
 - added CLK_PLL4D1 & CLK_SCI0ASYNC
 - added per-CA55 clocks
 - added missing error check in r9a09g077_cpg_mux_clk_register
 - fixed num_hw_mod_clks to 14
 - added missing 2 holes in mstpcr_for_rzt2h
 - renamed cpg_read_rzt2h_mstp_from_offset to cpg_read_rzt2h_mstp,
   directly reads at calculated address
 - added cpg_write_rzt2h_mstp and call in cpg_mstp_clock_endisable
 - do not register reset controller in case of CLK_REG_LAYOUT_RZ_T2H
 - moved CLK_DIV & CLK_MUX definitions to RZT2H specifics
Changes v6->v7: none
Changes v5->v6: none
Changes v4->v5: none
Changes v3->v4:
   - Add missing #include <bitfield.h> (reported by bot)
   - Add missing __iomem address space in cpg_rzt2h_addr_from_offset and
     return type (reported by bot)
   - fixed clocks: inverted 'mult' and 'div' parameters when using 
     the DEF_FIXED macro
---
 drivers/clk/renesas/Kconfig            |   5 +
 drivers/clk/renesas/Makefile           |   1 +
 drivers/clk/renesas/r9a09g077-cpg.c    | 243 +++++++++++++++++++++++++
 drivers/clk/renesas/renesas-cpg-mssr.c |  89 ++++++++-
 drivers/clk/renesas/renesas-cpg-mssr.h |  12 ++
 5 files changed, 348 insertions(+), 2 deletions(-)
 create mode 100644 drivers/clk/renesas/r9a09g077-cpg.c

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 50c20119d12a..45f9ae5b6ef1 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -43,6 +43,7 @@ config CLK_RENESAS
 	select CLK_R9A09G047 if ARCH_R9A09G047
 	select CLK_R9A09G056 if ARCH_R9A09G056
 	select CLK_R9A09G057 if ARCH_R9A09G057
+	select CLK_R9A09G077 if ARCH_R9A09G077
 	select CLK_SH73A0 if ARCH_SH73A0
 
 if CLK_RENESAS
@@ -208,6 +209,10 @@ config CLK_R9A09G057
        bool "RZ/V2H(P) clock support" if COMPILE_TEST
        select CLK_RZV2H
 
+config CLK_R9A09G077
+	bool "RZ/T2H clock support" if COMPILE_TEST
+	select CLK_RENESAS_CPG_MSSR
+
 config CLK_SH73A0
 	bool "SH-Mobile AG5 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index f9075bca6e95..d8d894a15d24 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_CLK_R9A09G011)		+= r9a09g011-cpg.o
 obj-$(CONFIG_CLK_R9A09G047)		+= r9a09g047-cpg.o
 obj-$(CONFIG_CLK_R9A09G056)		+= r9a09g056-cpg.o
 obj-$(CONFIG_CLK_R9A09G057)		+= r9a09g057-cpg.o
+obj-$(CONFIG_CLK_R9A09G077)		+= r9a09g077-cpg.o
 obj-$(CONFIG_CLK_SH73A0)		+= clk-sh73a0.o
 
 # Family
diff --git a/drivers/clk/renesas/r9a09g077-cpg.c b/drivers/clk/renesas/r9a09g077-cpg.c
new file mode 100644
index 000000000000..ba084514127a
--- /dev/null
+++ b/drivers/clk/renesas/r9a09g077-cpg.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * r9a09g077 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ *
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h>
+#include "renesas-cpg-mssr.h"
+
+#define RZT2H_REG_BLOCK_SHIFT	11
+#define RZT2H_REG_OFFSET_MASK	GENMASK(10, 0)
+#define RZT2H_REG_CONF(block, offset)	(((block) << RZT2H_REG_BLOCK_SHIFT) | \
+					((offset) & RZT2H_REG_OFFSET_MASK))
+
+#define RZT2H_REG_BLOCK(x)		((x) >> RZT2H_REG_BLOCK_SHIFT)
+#define RZT2H_REG_OFFSET(x)		((x) & RZT2H_REG_OFFSET_MASK)
+
+#define SCKCR		RZT2H_REG_CONF(0, 0x00)
+#define SCKCR2		RZT2H_REG_CONF(1, 0x04)
+#define SCKCR3		RZT2H_REG_CONF(0, 0x08)
+
+#define OFFSET_MASK	GENMASK(31, 20)
+#define SHIFT_MASK	GENMASK(19, 12)
+#define WIDTH_MASK	GENMASK(11, 8)
+
+#define CONF_PACK(offset, shift, width)  \
+	(FIELD_PREP_CONST(OFFSET_MASK, (offset)) | \
+	FIELD_PREP_CONST(SHIFT_MASK, (shift)) | \
+	FIELD_PREP_CONST(WIDTH_MASK, (width)))
+
+#define GET_SHIFT(val)         FIELD_GET(SHIFT_MASK, val)
+#define GET_WIDTH(val)         FIELD_GET(WIDTH_MASK, val)
+#define GET_REG_OFFSET(val)    FIELD_GET(OFFSET_MASK, val)
+
+#define DIVCA55C0	CONF_PACK(SCKCR2, 8, 1)
+#define DIVCA55C1	CONF_PACK(SCKCR2, 9, 1)
+#define DIVCA55C2	CONF_PACK(SCKCR2, 10, 1)
+#define DIVCA55C3	CONF_PACK(SCKCR2, 11, 1)
+#define DIVCA55S	CONF_PACK(SCKCR2, 12, 1)
+
+#define DIVSCI0ASYNC	CONF_PACK(SCKCR3, 6, 2)
+
+#define SEL_PLL		CONF_PACK(SCKCR, 22, 1)
+
+
+enum rzt2h_clk_types {
+	CLK_TYPE_RZT2H_DIV = CLK_TYPE_CUSTOM,	/* Clock with divider */
+	CLK_TYPE_RZT2H_MUX,			/* Clock with clock source selector */
+};
+
+#define DEF_DIV(_name, _id, _parent, _conf, _dtable) \
+	DEF_TYPE(_name, _id, CLK_TYPE_RZT2H_DIV, .conf = _conf, \
+		 .parent = _parent, .dtable = _dtable, .flag = 0)
+#define DEF_MUX(_name, _id, _conf, _parent_names, _num_parents, \
+		_mux_flags) \
+	DEF_TYPE(_name, _id, CLK_TYPE_RZT2H_MUX, .conf = _conf, \
+		 .parent_names = _parent_names, .num_parents = _num_parents, \
+		 .flag = 0, .mux_flags = _mux_flags)
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R9A09G077_CLK_PCLKM,
+
+	/* External Input Clocks */
+	CLK_EXTAL,
+
+	/* Internal Core Clocks */
+	CLK_LOCO,
+	CLK_PLL0,
+	CLK_PLL1,
+	CLK_PLL4,
+	CLK_SEL_CLK_PLL0,
+	CLK_SEL_CLK_PLL1,
+	CLK_SEL_CLK_PLL4,
+	CLK_PLL4D1,
+	CLK_SCI0ASYNC,
+
+	/* Module Clocks */
+	MOD_CLK_BASE,
+};
+
+static const struct clk_div_table dtable_1_2[] = {
+	{0, 2},
+	{1, 1},
+	{0, 0},
+};
+
+static const struct clk_div_table dtable_24_25_30_32[] = {
+	{0, 32},
+	{1, 30},
+	{2, 25},
+	{3, 24},
+	{0, 0},
+};
+
+/* Mux clock tables */
+
+static const char * const sel_clk_pll0[] = { ".loco", ".pll0" };
+static const char * const sel_clk_pll1[] = { ".loco", ".pll1" };
+static const char * const sel_clk_pll4[] = { ".loco", ".pll4" };
+
+static const struct cpg_core_clk r9a09g077_core_clks[] __initconst = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal", CLK_EXTAL),
+
+	/* Internal Core Clocks */
+	DEF_RATE(".loco", CLK_LOCO, 1000 * 1000),
+	DEF_FIXED(".pll0", CLK_PLL0, CLK_EXTAL, 1, 48),
+	DEF_FIXED(".pll1", CLK_PLL1, CLK_EXTAL, 1, 40),
+	DEF_FIXED(".pll4", CLK_PLL4, CLK_EXTAL, 1, 96),
+
+	DEF_MUX(".sel_clk_pll0", CLK_SEL_CLK_PLL0, SEL_PLL,
+		sel_clk_pll0, ARRAY_SIZE(sel_clk_pll0), CLK_MUX_READ_ONLY),
+	DEF_MUX(".sel_clk_pll1", CLK_SEL_CLK_PLL1, SEL_PLL,
+		sel_clk_pll1, ARRAY_SIZE(sel_clk_pll1), CLK_MUX_READ_ONLY),
+	DEF_MUX(".sel_clk_pll4", CLK_SEL_CLK_PLL4, SEL_PLL,
+		sel_clk_pll4, ARRAY_SIZE(sel_clk_pll4), CLK_MUX_READ_ONLY),
+
+	DEF_FIXED(".pll4d1", CLK_PLL4D1, CLK_SEL_CLK_PLL4, 1, 1),
+	DEF_DIV(".sci0async", CLK_SCI0ASYNC, CLK_PLL4D1, DIVSCI0ASYNC,
+		dtable_24_25_30_32),
+
+	/* Core output clk */
+	DEF_DIV("CA55C0", R9A09G077_CLK_CA55C0, CLK_SEL_CLK_PLL0, DIVCA55C0,
+		dtable_1_2),
+	DEF_DIV("CA55C1", R9A09G077_CLK_CA55C1, CLK_SEL_CLK_PLL0, DIVCA55C1,
+		dtable_1_2),
+	DEF_DIV("CA55C2", R9A09G077_CLK_CA55C2, CLK_SEL_CLK_PLL0, DIVCA55C2,
+		dtable_1_2),
+	DEF_DIV("CA55C3", R9A09G077_CLK_CA55C3, CLK_SEL_CLK_PLL0, DIVCA55C3,
+		dtable_1_2),
+	DEF_DIV("CA55S", R9A09G077_CLK_CA55S, CLK_SEL_CLK_PLL0, DIVCA55S,
+		dtable_1_2),
+	DEF_FIXED("PCLKGPTL", R9A09G077_CLK_PCLKGPTL, CLK_SEL_CLK_PLL1, 2, 1),
+	DEF_FIXED("PCLKM", R9A09G077_CLK_PCLKM, CLK_SEL_CLK_PLL1, 8, 1),
+};
+
+static const struct mssr_mod_clk r9a09g077_mod_clks[] __initconst = {
+	DEF_MOD("sci0fck", 8, CLK_SCI0ASYNC),
+};
+
+static struct clk * __init
+r9a09g077_cpg_div_clk_register(struct device *dev,
+			       const struct cpg_core_clk *core,
+			       void __iomem *addr, struct cpg_mssr_pub *pub)
+{
+	const struct clk *parent;
+	const char *parent_name;
+	struct clk_hw *clk_hw;
+
+	parent = pub->clks[core->parent];
+
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	parent_name = __clk_get_name(parent);
+
+	if (core->dtable)
+		clk_hw = clk_hw_register_divider_table(dev, core->name,
+						       parent_name, 0,
+						       addr,
+						       GET_SHIFT(core->conf),
+						       GET_WIDTH(core->conf),
+						       core->flag,
+						       core->dtable,
+						       &pub->rmw_lock);
+	else
+		clk_hw = clk_hw_register_divider(dev, core->name,
+						 parent_name, 0,
+						 addr,
+						 GET_SHIFT(core->conf),
+						 GET_WIDTH(core->conf),
+						 core->flag, &pub->rmw_lock);
+
+	if (IS_ERR(clk_hw))
+		return ERR_CAST(clk_hw);
+
+	return clk_hw->clk;
+
+}
+
+static struct clk * __init
+r9a09g077_cpg_mux_clk_register(struct device *dev,
+			       const struct cpg_core_clk *core,
+			       void __iomem *addr, struct cpg_mssr_pub *pub)
+{
+	struct clk_hw *clk_hw;
+
+	clk_hw = devm_clk_hw_register_mux(dev, core->name,
+					  core->parent_names, core->num_parents,
+					  core->flag,
+					  addr,
+					  GET_SHIFT(core->conf),
+					  GET_WIDTH(core->conf),
+					  core->mux_flags, &pub->rmw_lock);
+	if (IS_ERR(clk_hw))
+		return ERR_CAST(clk_hw);
+
+	return clk_hw->clk;
+}
+
+static struct clk * __init
+r9a09g077_cpg_clk_register(struct device *dev, const struct cpg_core_clk *core,
+			   const struct cpg_mssr_info *info,
+			   struct cpg_mssr_pub *pub)
+{
+	u32 offset = GET_REG_OFFSET(core->conf);
+	void __iomem *base = RZT2H_REG_BLOCK(offset) ? pub->base1 : pub->base0;
+	void __iomem *addr = base + RZT2H_REG_OFFSET(offset);
+
+	switch (core->type) {
+	case CLK_TYPE_RZT2H_DIV:
+		return r9a09g077_cpg_div_clk_register(dev, core, addr, pub);
+	case CLK_TYPE_RZT2H_MUX:
+		return r9a09g077_cpg_mux_clk_register(dev, core, addr, pub);
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+}
+
+const struct cpg_mssr_info r9a09g077_cpg_mssr_info = {
+	/* Core Clocks */
+	.core_clks = r9a09g077_core_clks,
+	.num_core_clks = ARRAY_SIZE(r9a09g077_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Module Clocks */
+	.mod_clks = r9a09g077_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r9a09g077_mod_clks),
+	.num_hw_mod_clks = 14 * 32,
+
+	.reg_layout = CLK_REG_LAYOUT_RZ_T2H,
+	.cpg_clk_register = r9a09g077_cpg_clk_register,
+};
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index f102a1dd9694..4a5ac9eef9cc 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -80,6 +80,37 @@ static const u16 mstpcr_for_gen4[] = {
 	0x2D60, 0x2D64, 0x2D68, 0x2D6C, 0x2D70, 0x2D74,
 };
 
+/*
+ * Module Stop Control Register (RZ/T2H)
+ * RZ/T2H has 2 registers blocks,
+ * Bit 12 is used to differentiate them
+ */
+
+#define RZT2H_MSTPCR_BLOCK_SHIFT	12
+#define RZT2H_MSTPCR_OFFSET_MASK	GENMASK(11, 0)
+#define RZT2H_MSTPCR(block, offset)	(((block) << RZT2H_MSTPCR_BLOCK_SHIFT) | \
+					((offset) & RZT2H_MSTPCR_OFFSET_MASK))
+
+#define RZT2H_MSTPCR_BLOCK(x)		((x) >> RZT2H_MSTPCR_BLOCK_SHIFT)
+#define RZT2H_MSTPCR_OFFSET(x)		((x) & RZT2H_MSTPCR_OFFSET_MASK)
+
+static const u16 mstpcr_for_rzt2h[] = {
+	RZT2H_MSTPCR(0, 0x300), /* MSTPCRA */
+	RZT2H_MSTPCR(0, 0x304), /* MSTPCRB */
+	RZT2H_MSTPCR(0, 0x308), /* MSTPCRC */
+	RZT2H_MSTPCR(0, 0x30c),	/* MSTPCRD */
+	RZT2H_MSTPCR(0, 0x310), /* MSTPCRE */
+	0,
+	RZT2H_MSTPCR(1, 0x318), /* MSTPCRG */
+	0,
+	RZT2H_MSTPCR(1, 0x320), /* MSTPCRI */
+	RZT2H_MSTPCR(0, 0x324), /* MSTPCRJ */
+	RZT2H_MSTPCR(0, 0x328), /* MSTPCRK */
+	RZT2H_MSTPCR(0, 0x32c), /* MSTPCRL */
+	RZT2H_MSTPCR(0, 0x330), /* MSTPCRM */
+	RZT2H_MSTPCR(1, 0x334), /* MSTPCRN */
+};
+
 /*
  * Standby Control Register offsets (RZ/A)
  * Base address is FRQCR register
@@ -188,6 +219,26 @@ struct mstp_clock {
 
 #define to_mstp_clock(_hw) container_of(_hw, struct mstp_clock, hw)
 
+static u32 cpg_rzt2h_mstp_read(struct clk_hw *hw, u16 offset)
+{
+	struct mstp_clock *clock = to_mstp_clock(hw);
+	struct cpg_mssr_priv *priv = clock->priv;
+	void __iomem *base =
+		RZT2H_MSTPCR_BLOCK(offset) ? priv->pub.base1 : priv->pub.base0;
+
+	return readl(base + RZT2H_MSTPCR_OFFSET(offset));
+}
+
+static void cpg_rzt2h_mstp_write(struct clk_hw *hw, u16 offset, u32 value)
+{
+	struct mstp_clock *clock = to_mstp_clock(hw);
+	struct cpg_mssr_priv *priv = clock->priv;
+	void __iomem *base =
+		RZT2H_MSTPCR_BLOCK(offset) ? priv->pub.base1 : priv->pub.base0;
+
+	writel(value, base + RZT2H_MSTPCR_OFFSET(offset));
+}
+
 static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
 {
 	struct mstp_clock *clock = to_mstp_clock(hw);
@@ -216,6 +267,18 @@ static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
 		readb(priv->pub.base0 + priv->control_regs[reg]);
 		barrier_data(priv->pub.base0 + priv->control_regs[reg]);
 
+	} else if (priv->reg_layout == CLK_REG_LAYOUT_RZ_T2H) {
+		value = cpg_rzt2h_mstp_read(hw,
+					    priv->control_regs[reg]);
+
+		if (enable)
+			value &= ~bitmask;
+		else
+			value |= bitmask;
+
+		cpg_rzt2h_mstp_write(hw,
+				     priv->control_regs[reg],
+				     value);
 	} else {
 		value = readl(priv->pub.base0 + priv->control_regs[reg]);
 		if (enable)
@@ -227,7 +290,8 @@ static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
 
 	spin_unlock_irqrestore(&priv->pub.rmw_lock, flags);
 
-	if (!enable || priv->reg_layout == CLK_REG_LAYOUT_RZ_A)
+	if (!enable || priv->reg_layout == CLK_REG_LAYOUT_RZ_A ||
+	    priv->reg_layout == CLK_REG_LAYOUT_RZ_T2H)
 		return 0;
 
 	error = readl_poll_timeout_atomic(priv->pub.base0 + priv->status_regs[reg],
@@ -258,6 +322,9 @@ static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
 
 	if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A)
 		value = readb(priv->pub.base0 + priv->control_regs[reg]);
+	else if (priv->reg_layout == CLK_REG_LAYOUT_RZ_T2H)
+		value = cpg_rzt2h_mstp_read(hw,
+					    priv->control_regs[reg]);
 	else
 		value = readl(priv->pub.base0 + priv->status_regs[reg]);
 
@@ -868,6 +935,12 @@ static const struct of_device_id cpg_mssr_match[] = {
 		.compatible = "renesas,r8a779h0-cpg-mssr",
 		.data = &r8a779h0_cpg_mssr_info,
 	},
+#endif
+#ifdef CONFIG_CLK_R9A09G077
+	{
+		.compatible = "renesas,r9a09g077-cpg-mssr",
+		.data = &r9a09g077_cpg_mssr_info,
+	},
 #endif
 	{ /* sentinel */ }
 };
@@ -1065,6 +1138,13 @@ static int __init cpg_mssr_common_init(struct device *dev,
 		error = -ENOMEM;
 		goto out_err;
 	}
+	if (info->reg_layout == CLK_REG_LAYOUT_RZ_T2H) {
+		priv->pub.base1 = of_iomap(np, 1);
+		if (!priv->pub.base1) {
+			error = -ENOMEM;
+			goto out_err;
+		}
+	}
 
 	priv->num_core_clks = info->num_total_core_clks;
 	priv->num_mod_clks = info->num_hw_mod_clks;
@@ -1078,6 +1158,8 @@ static int __init cpg_mssr_common_init(struct device *dev,
 		priv->reset_clear_regs = srstclr;
 	} else if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A) {
 		priv->control_regs = stbcr;
+	} else if (priv->reg_layout == CLK_REG_LAYOUT_RZ_T2H) {
+		priv->control_regs = mstpcr_for_rzt2h;
 	} else if (priv->reg_layout == CLK_REG_LAYOUT_RCAR_GEN4) {
 		priv->status_regs = mstpsr_for_gen4;
 		priv->control_regs = mstpcr_for_gen4;
@@ -1108,6 +1190,8 @@ static int __init cpg_mssr_common_init(struct device *dev,
 out_err:
 	if (priv->pub.base0)
 		iounmap(priv->pub.base0);
+	if (priv->pub.base1)
+		iounmap(priv->pub.base1);
 	kfree(priv);
 
 	return error;
@@ -1172,7 +1256,8 @@ static int __init cpg_mssr_probe(struct platform_device *pdev)
 		goto reserve_exit;
 
 	/* Reset Controller not supported for Standby Control SoCs */
-	if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A)
+	if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A ||
+	    priv->reg_layout == CLK_REG_LAYOUT_RZ_T2H)
 		goto reserve_exit;
 
 	error = cpg_mssr_reset_controller_register(priv);
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.h b/drivers/clk/renesas/renesas-cpg-mssr.h
index 7ce3cc9a64c1..ad11ab5f0069 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.h
+++ b/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -29,18 +29,28 @@ struct cpg_core_clk {
 	unsigned int div;
 	unsigned int mult;
 	unsigned int offset;
+	union {
+		const char * const *parent_names;
+		const struct clk_div_table *dtable;
+	};
+	u32 conf;
+	u16 flag;
+	u8 mux_flags;
+	u8 num_parents;
 };
 
 /**
  * struct cpg_mssr_pub - data shared with device-specific clk registration code
  *
  * @base0: CPG/MSSR register block base0 address
+ * @base1: CPG/MSSR register block base1 address
  * @notifiers: Notifier chain to save/restore clock state for system resume
  * @rmw_lock: protects RMW register accesses
  * @clks: pointer to clocks
  */
 struct cpg_mssr_pub {
 	void __iomem *base0;
+	void __iomem *base1;
 	struct raw_notifier_head notifiers;
 	spinlock_t rmw_lock;
 	struct clk **clks;
@@ -106,6 +116,7 @@ enum clk_reg_layout {
 	CLK_REG_LAYOUT_RCAR_GEN2_AND_GEN3 = 0,
 	CLK_REG_LAYOUT_RZ_A,
 	CLK_REG_LAYOUT_RCAR_GEN4,
+	CLK_REG_LAYOUT_RZ_T2H,
 };
 
     /**
@@ -197,6 +208,7 @@ extern const struct cpg_mssr_info r8a779a0_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a779f0_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a779g0_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a779h0_cpg_mssr_info;
+extern const struct cpg_mssr_info r9a09g077_cpg_mssr_info;
 
 void __init cpg_mssr_early_init(struct device_node *np,
 				const struct cpg_mssr_info *info);
-- 
2.43.0

[PATCH v10 06/10] serial: sh-sci: Use private port ID

[Thierry Bultel]

New port types cannot be added in serial_core.h, which is shared with
userspace.
In order to support new port types, the coming new ones will have
BIT(7) set in the id value, and in this case, uartport->type is
set to PORT_GENERIC.
This commit therefore changes all the places where the port type is
read, by not relying on uartport->type but on the private
value stored in struct sci_port.

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v9->v10:
 - Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
 - Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Changes v8->v9:
 - Shrunk length od type & regtype
 - Uses BIT(7) in id value
 - Set sci_ports[0].type & sci_ports[0].regtype in scix_early_console_setup
 drivers/tty/serial/sh-sci-common.h |   3 +
 drivers/tty/serial/sh-sci.c        | 159 ++++++++++++++++-------------
 2 files changed, 92 insertions(+), 70 deletions(-)

diff --git a/drivers/tty/serial/sh-sci-common.h b/drivers/tty/serial/sh-sci-common.h
index bd9d9cfac1c8..fcddf66780c9 100644
--- a/drivers/tty/serial/sh-sci-common.h
+++ b/drivers/tty/serial/sh-sci-common.h
@@ -142,6 +142,9 @@ struct sci_port {
 	int				rx_fifo_timeout;
 	u16				hscif_tot;
 
+	u8				type;
+	u8				regtype;
+
 	const struct sci_port_ops *ops;
 
 	bool has_rtscts;
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index ff1986dc6af3..be719c0db64a 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -75,6 +75,8 @@
 
 #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
 
+#define SCI_PUBLIC_PORT_ID(port) (((port) & BIT(7)) ? PORT_GENERIC : (port))
+
 static struct sci_port sci_ports[SCI_NPORTS];
 static unsigned long sci_ports_in_use;
 static struct uart_driver sci_uart_driver;
@@ -580,7 +582,7 @@ static void sci_start_tx(struct uart_port *port)
 	unsigned short ctrl;
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+	if (s->type == PORT_SCIFA || s->type == PORT_SCIFB) {
 		u16 new, scr = sci_serial_in(port, SCSCR);
 		if (s->chan_tx)
 			new = scr | SCSCR_TDRQE;
@@ -592,7 +594,7 @@ static void sci_start_tx(struct uart_port *port)
 
 	if (s->chan_tx && !kfifo_is_empty(&port->state->port.xmit_fifo) &&
 	    dma_submit_error(s->cookie_tx)) {
-		if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
+		if (s->regtype == SCIx_RZ_SCIFA_REGTYPE)
 			/* Switch irq from SCIF to DMA */
 			disable_irq_nosync(s->irqs[SCIx_TXI_IRQ]);
 
@@ -601,8 +603,8 @@ static void sci_start_tx(struct uart_port *port)
 	}
 #endif
 
-	if (!s->chan_tx || s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE ||
-	    port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+	if (!s->chan_tx || s->regtype == SCIx_RZ_SCIFA_REGTYPE ||
+	    s->type == PORT_SCIFA || s->type == PORT_SCIFB) {
 		/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
 		ctrl = sci_serial_in(port, SCSCR);
 
@@ -611,7 +613,7 @@ static void sci_start_tx(struct uart_port *port)
 		 * (transmit interrupt enable) or in the same instruction to start
 		 * the transmit process.
 		 */
-		if (port->type == PORT_SCI)
+		if (s->type == PORT_SCI)
 			ctrl |= SCSCR_TE;
 
 		sci_serial_out(port, SCSCR, ctrl | SCSCR_TIE);
@@ -620,12 +622,13 @@ static void sci_start_tx(struct uart_port *port)
 
 static void sci_stop_tx(struct uart_port *port)
 {
+	struct sci_port *s = to_sci_port(port);
 	unsigned short ctrl;
 
 	/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
 	ctrl = sci_serial_in(port, SCSCR);
 
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+	if (s->type == PORT_SCIFA || s->type == PORT_SCIFB)
 		ctrl &= ~SCSCR_TDRQE;
 
 	ctrl &= ~SCSCR_TIE;
@@ -633,21 +636,22 @@ static void sci_stop_tx(struct uart_port *port)
 	sci_serial_out(port, SCSCR, ctrl);
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
-	if (to_sci_port(port)->chan_tx &&
-	    !dma_submit_error(to_sci_port(port)->cookie_tx)) {
-		dmaengine_terminate_async(to_sci_port(port)->chan_tx);
-		to_sci_port(port)->cookie_tx = -EINVAL;
+	if (s->chan_tx &&
+	    !dma_submit_error(s->cookie_tx)) {
+		dmaengine_terminate_async(s->chan_tx);
+		s->cookie_tx = -EINVAL;
 	}
 #endif
 }
 
 static void sci_start_rx(struct uart_port *port)
 {
+	struct sci_port *s = to_sci_port(port);
 	unsigned short ctrl;
 
 	ctrl = sci_serial_in(port, SCSCR) | port_rx_irq_mask(port);
 
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+	if (s->type == PORT_SCIFA || s->type == PORT_SCIFB)
 		ctrl &= ~SCSCR_RDRQE;
 
 	sci_serial_out(port, SCSCR, ctrl);
@@ -655,11 +659,12 @@ static void sci_start_rx(struct uart_port *port)
 
 static void sci_stop_rx(struct uart_port *port)
 {
+	struct sci_port *s = to_sci_port(port);
 	unsigned short ctrl;
 
 	ctrl = sci_serial_in(port, SCSCR);
 
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+	if (s->type == PORT_SCIFA || s->type == PORT_SCIFB)
 		ctrl &= ~SCSCR_RDRQE;
 
 	ctrl &= ~port_rx_irq_mask(port);
@@ -669,10 +674,12 @@ static void sci_stop_rx(struct uart_port *port)
 
 static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask)
 {
-	if (port->type == PORT_SCI) {
+	struct sci_port *s = to_sci_port(port);
+
+	if (s->type == PORT_SCI) {
 		/* Just store the mask */
 		sci_serial_out(port, SCxSR, mask);
-	} else if (to_sci_port(port)->params->overrun_mask == SCIFA_ORER) {
+	} else if (s->params->overrun_mask == SCIFA_ORER) {
 		/* SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 */
 		/* Only clear the status bits we want to clear */
 		sci_serial_out(port, SCxSR, sci_serial_in(port, SCxSR) & mask);
@@ -742,13 +749,13 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag)
 		return;
 	}
 
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+	if (s->type == PORT_SCIFA || s->type == PORT_SCIFB) {
 		u16 data = sci_serial_in(port, SCPDR);
 		u16 ctrl = sci_serial_in(port, SCPCR);
 
 		/* Enable RXD and TXD pin functions */
 		ctrl &= ~(SCPCR_RXDC | SCPCR_TXDC);
-		if (to_sci_port(port)->has_rtscts) {
+		if (s->has_rtscts) {
 			/* RTS# is output, active low, unless autorts */
 			if (!(port->mctrl & TIOCM_RTS)) {
 				ctrl |= SCPCR_RTSC;
@@ -765,7 +772,7 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag)
 		}
 		sci_serial_out(port, SCPDR, data);
 		sci_serial_out(port, SCPCR, ctrl);
-	} else if (sci_getreg(port, SCSPTR)->size && s->cfg->regtype != SCIx_RZV2H_SCIF_REGTYPE) {
+	} else if (sci_getreg(port, SCSPTR)->size && s->regtype != SCIx_RZV2H_SCIF_REGTYPE) {
 		u16 status = sci_serial_in(port, SCSPTR);
 
 		/* RTS# is always output; and active low, unless autorts */
@@ -852,7 +859,7 @@ static void sci_transmit_chars(struct uart_port *port)
 			c = port->x_char;
 			port->x_char = 0;
 		} else if (stopped || !kfifo_get(&tport->xmit_fifo, &c)) {
-			if (port->type == PORT_SCI &&
+			if (s->type == PORT_SCI &&
 				   kfifo_is_empty(&tport->xmit_fifo)) {
 				ctrl = sci_serial_in(port, SCSCR);
 				ctrl &= ~SCSCR_TE;
@@ -873,7 +880,7 @@ static void sci_transmit_chars(struct uart_port *port)
 	if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 	if (kfifo_is_empty(&tport->xmit_fifo)) {
-		if (port->type == PORT_SCI) {
+		if (s->type == PORT_SCI) {
 			ctrl = sci_serial_in(port, SCSCR);
 			ctrl &= ~SCSCR_TIE;
 			ctrl |= SCSCR_TEIE;
@@ -904,7 +911,7 @@ static void sci_receive_chars(struct uart_port *port)
 		if (count == 0)
 			break;
 
-		if (port->type == PORT_SCI) {
+		if (s->type == PORT_SCI) {
 			char c = sci_serial_in(port, SCxRDR);
 			if (uart_handle_sysrq_char(port, c))
 				count = 0;
@@ -914,8 +921,8 @@ static void sci_receive_chars(struct uart_port *port)
 			for (i = 0; i < count; i++) {
 				char c;
 
-				if (port->type == PORT_SCIF ||
-				    port->type == PORT_HSCIF) {
+				if (s->type == PORT_SCIF ||
+				    s->type == PORT_HSCIF) {
 					status = sci_serial_in(port, SCxSR);
 					c = sci_serial_in(port, SCxRDR);
 				} else {
@@ -1052,6 +1059,7 @@ static int sci_handle_breaks(struct uart_port *port)
 
 static int scif_set_rtrg(struct uart_port *port, int rx_trig)
 {
+	struct sci_port *s = to_sci_port(port);
 	unsigned int bits;
 
 	if (rx_trig >= port->fifosize)
@@ -1065,7 +1073,7 @@ static int scif_set_rtrg(struct uart_port *port, int rx_trig)
 		return rx_trig;
 	}
 
-	switch (port->type) {
+	switch (s->type) {
 	case PORT_SCIF:
 		if (rx_trig < 4) {
 			bits = 0;
@@ -1150,7 +1158,7 @@ static ssize_t rx_fifo_trigger_store(struct device *dev,
 		return ret;
 
 	sci->rx_trigger = sci->ops->set_rtrg(port, r);
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+	if (sci->type == PORT_SCIFA || sci->type == PORT_SCIFB)
 		sci->ops->set_rtrg(port, 1);
 
 	return count;
@@ -1166,7 +1174,7 @@ static ssize_t rx_fifo_timeout_show(struct device *dev,
 	struct sci_port *sci = to_sci_port(port);
 	int v;
 
-	if (port->type == PORT_HSCIF)
+	if (sci->type == PORT_HSCIF)
 		v = sci->hscif_tot >> HSSCR_TOT_SHIFT;
 	else
 		v = sci->rx_fifo_timeout;
@@ -1188,7 +1196,7 @@ static ssize_t rx_fifo_timeout_store(struct device *dev,
 	if (ret)
 		return ret;
 
-	if (port->type == PORT_HSCIF) {
+	if (sci->type == PORT_HSCIF) {
 		if (r < 0 || r > 3)
 			return -EINVAL;
 		sci->hscif_tot = r << HSSCR_TOT_SHIFT;
@@ -1229,11 +1237,11 @@ static void sci_dma_tx_complete(void *arg)
 		schedule_work(&s->work_tx);
 	} else {
 		s->cookie_tx = -EINVAL;
-		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
-		    s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
+		if (s->type == PORT_SCIFA || s->type == PORT_SCIFB ||
+		    s->regtype == SCIx_RZ_SCIFA_REGTYPE) {
 			u16 ctrl = sci_serial_in(port, SCSCR);
 			sci_serial_out(port, SCSCR, ctrl & ~SCSCR_TIE);
-			if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
+			if (s->regtype == SCIx_RZ_SCIFA_REGTYPE) {
 				/* Switch irq from DMA to SCIF */
 				dmaengine_pause(s->chan_tx_saved);
 				enable_irq(s->irqs[SCIx_TXI_IRQ]);
@@ -1315,10 +1323,10 @@ static void sci_dma_rx_reenable_irq(struct sci_port *s)
 
 	/* Direct new serial port interrupts back to CPU */
 	scr = sci_serial_in(port, SCSCR);
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
-	    s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
+	if (s->type == PORT_SCIFA || s->type == PORT_SCIFB ||
+	    s->regtype == SCIx_RZ_SCIFA_REGTYPE) {
 		enable_irq(s->irqs[SCIx_RXI_IRQ]);
-		if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
+		if (s->regtype == SCIx_RZ_SCIFA_REGTYPE)
 			s->ops->set_rtrg(port, s->rx_trigger);
 		else
 			scr &= ~SCSCR_RDRQE;
@@ -1558,8 +1566,8 @@ static enum hrtimer_restart sci_dma_rx_timer_fn(struct hrtimer *t)
 			tty_flip_buffer_push(&port->state->port);
 	}
 
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
-	    s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
+	if (s->type == PORT_SCIFA || s->type == PORT_SCIFB ||
+	    s->regtype == SCIx_RZ_SCIFA_REGTYPE)
 		sci_dma_rx_submit(s, true);
 
 	sci_dma_rx_reenable_irq(s);
@@ -1682,8 +1690,8 @@ static void sci_request_dma(struct uart_port *port)
 
 		s->chan_rx_saved = s->chan_rx = chan;
 
-		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
-		    s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
+		if (s->type == PORT_SCIFA || s->type == PORT_SCIFB ||
+		    s->regtype == SCIx_RZ_SCIFA_REGTYPE)
 			sci_dma_rx_submit(s, false);
 	}
 }
@@ -1753,10 +1761,10 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 		u16 ssr = sci_serial_in(port, SCxSR);
 
 		/* Disable future Rx interrupts */
-		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
-		    s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
+		if (s->type == PORT_SCIFA || s->type == PORT_SCIFB ||
+		    s->regtype == SCIx_RZ_SCIFA_REGTYPE) {
 			disable_irq_nosync(s->irqs[SCIx_RXI_IRQ]);
-			if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
+			if (s->regtype == SCIx_RZ_SCIFA_REGTYPE) {
 				s->ops->set_rtrg(port, 1);
 				scr |= SCSCR_RIE;
 			} else {
@@ -1820,7 +1828,7 @@ static irqreturn_t sci_tx_end_interrupt(int irq, void *ptr)
 	unsigned long flags;
 	u32 ctrl;
 
-	if (port->type != PORT_SCI)
+	if (s->type != PORT_SCI)
 		return sci_tx_interrupt(irq, ptr);
 
 	uart_port_lock_irqsave(port, &flags);
@@ -1867,7 +1875,7 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr)
 	}
 
 	/* Handle errors */
-	if (port->type == PORT_SCI) {
+	if (s->type == PORT_SCI) {
 		if (sci_handle_errors(port)) {
 			/* discard character in rx buffer */
 			sci_serial_in(port, SCxSR);
@@ -2091,7 +2099,9 @@ static unsigned int sci_tx_empty(struct uart_port *port)
 
 static void sci_set_rts(struct uart_port *port, bool state)
 {
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+	struct sci_port *s = to_sci_port(port);
+
+	if (s->type == PORT_SCIFA || s->type == PORT_SCIFB) {
 		u16 data = sci_serial_in(port, SCPDR);
 
 		/* Active low */
@@ -2118,7 +2128,9 @@ static void sci_set_rts(struct uart_port *port, bool state)
 
 static bool sci_get_cts(struct uart_port *port)
 {
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+	struct sci_port *s = to_sci_port(port);
+
+	if (s->type == PORT_SCIFA || s->type == PORT_SCIFB) {
 		/* Active low */
 		return !(sci_serial_in(port, SCPDR) & SCPDR_CTSD);
 	} else if (sci_getreg(port, SCSPTR)->size) {
@@ -2164,21 +2176,21 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 	if (!(mctrl & TIOCM_RTS)) {
 		/* Disable Auto RTS */
-		if (s->cfg->regtype != SCIx_RZV2H_SCIF_REGTYPE)
+		if (s->regtype != SCIx_RZV2H_SCIF_REGTYPE)
 			sci_serial_out(port, SCFCR,
 				       sci_serial_in(port, SCFCR) & ~SCFCR_MCE);
 
 		/* Clear RTS */
 		sci_set_rts(port, 0);
 	} else if (s->autorts) {
-		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+		if (s->type == PORT_SCIFA || s->type == PORT_SCIFB) {
 			/* Enable RTS# pin function */
 			sci_serial_out(port, SCPCR,
 				sci_serial_in(port, SCPCR) & ~SCPCR_RTSC);
 		}
 
 		/* Enable Auto RTS */
-		if (s->cfg->regtype != SCIx_RZV2H_SCIF_REGTYPE)
+		if (s->regtype != SCIx_RZV2H_SCIF_REGTYPE)
 			sci_serial_out(port, SCFCR,
 				       sci_serial_in(port, SCFCR) | SCFCR_MCE);
 	} else {
@@ -2315,7 +2327,7 @@ static int sci_sck_calc(struct sci_port *s, unsigned int bps,
 	int err, min_err = INT_MAX;
 	unsigned int sr;
 
-	if (s->port.type != PORT_HSCIF)
+	if (s->type != PORT_HSCIF)
 		freq *= 2;
 
 	for_each_sr(sr, s) {
@@ -2342,7 +2354,7 @@ static int sci_brg_calc(struct sci_port *s, unsigned int bps,
 	int err, min_err = INT_MAX;
 	unsigned int sr, dl;
 
-	if (s->port.type != PORT_HSCIF)
+	if (s->type != PORT_HSCIF)
 		freq *= 2;
 
 	for_each_sr(sr, s) {
@@ -2375,7 +2387,7 @@ static int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
 	unsigned int sr, br, prediv, scrate, c;
 	int err, min_err = INT_MAX;
 
-	if (s->port.type != PORT_HSCIF)
+	if (s->type != PORT_HSCIF)
 		freq *= 2;
 
 	/*
@@ -2460,8 +2472,8 @@ static void sci_reset(struct uart_port *port)
 			s->ops->set_rtrg(port, 1);
 			timer_setup(&s->rx_fifo_timer, rx_fifo_timer_fn, 0);
 		} else {
-			if (port->type == PORT_SCIFA ||
-			    port->type == PORT_SCIFB)
+			if (s->type == PORT_SCIFA ||
+			    s->type == PORT_SCIFB)
 				s->ops->set_rtrg(port, 1);
 			else
 				s->ops->set_rtrg(port, s->rx_trigger);
@@ -2521,8 +2533,8 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	 */
 
 	/* Optional Undivided External Clock */
-	if (s->clk_rates[SCI_SCK] && port->type != PORT_SCIFA &&
-	    port->type != PORT_SCIFB) {
+	if (s->clk_rates[SCI_SCK] && s->type != PORT_SCIFA &&
+	    s->type != PORT_SCIFB) {
 		err = sci_sck_calc(s, baud, &srr1);
 		if (abs(err) < abs(min_err)) {
 			best_clk = SCI_SCK;
@@ -2607,7 +2619,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 		sci_serial_out(port, SEMR, 0);
 
 	if (best_clk >= 0) {
-		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+		if (s->type == PORT_SCIFA || s->type == PORT_SCIFB)
 			switch (srr + 1) {
 			case 5:  smr_val |= SCSMR_SRC_5;  break;
 			case 7:  smr_val |= SCSMR_SRC_7;  break;
@@ -2692,12 +2704,12 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * (transmit interrupt enable) or in the same instruction to
 	 * start the transmitting process. So skip setting TE here for SCI.
 	 */
-	if (port->type != PORT_SCI)
+	if (s->type != PORT_SCI)
 		scr_val |= SCSCR_TE;
 	scr_val |= SCSCR_RE | (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0));
 	sci_serial_out(port, SCSCR, scr_val | s->hscif_tot);
 	if ((srr + 1 == 5) &&
-	    (port->type == PORT_SCIFA || port->type == PORT_SCIFB)) {
+	    (s->type == PORT_SCIFA || s->type == PORT_SCIFB)) {
 		/*
 		 * In asynchronous mode, when the sampling rate is 1/5, first
 		 * received data may become invalid on some SCIFA and SCIFB.
@@ -2741,7 +2753,9 @@ void sci_pm(struct uart_port *port, unsigned int state,
 
 static const char *sci_type(struct uart_port *port)
 {
-	switch (port->type) {
+	struct sci_port *s = to_sci_port(port);
+
+	switch (s->type) {
 	case PORT_IRDA:
 		return "irda";
 	case PORT_SCI:
@@ -2825,8 +2839,7 @@ void sci_config_port(struct uart_port *port, int flags)
 {
 	if (flags & UART_CONFIG_TYPE) {
 		struct sci_port *sport = to_sci_port(port);
-
-		port->type = sport->cfg->type;
+		port->type = SCI_PUBLIC_PORT_ID(sport->type);
 		sci_request_port(port);
 	}
 }
@@ -2964,7 +2977,7 @@ static int sci_init_clocks(struct sci_port *sci_port, struct device *dev)
 	struct clk *clk;
 	unsigned int i;
 
-	if (sci_port->cfg->type == PORT_HSCIF)
+	if (sci_port->type == PORT_HSCIF)
 		clk_names[SCI_SCK] = "hsck";
 
 	for (i = 0; i < SCI_NUM_CLKS; i++) {
@@ -3050,6 +3063,9 @@ static int sci_init_single(struct platform_device *dev,
 
 	sci_port->cfg	= p;
 
+	sci_port->type	= p->type;
+	sci_port->regtype = p->regtype;
+
 	port->iotype	= UPIO_MEM;
 	port->line	= index;
 	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SH_SCI_CONSOLE);
@@ -3128,11 +3144,11 @@ static int sci_init_single(struct platform_device *dev,
 			return ret;
 	}
 
-	port->type		= p->type;
+	port->type		= SCI_PUBLIC_PORT_ID(p->type);
 	port->flags		= UPF_FIXED_PORT | UPF_BOOT_AUTOCONF | p->flags;
 	port->fifosize		= sci_port->params->fifosize;
 
-	if (port->type == PORT_SCI && !dev->dev.of_node) {
+	if (p->type == PORT_SCI && !dev->dev.of_node) {
 		if (sci_port->reg_size >= 0x20)
 			port->regshift = 2;
 		else
@@ -3322,13 +3338,13 @@ static struct uart_driver sci_uart_driver = {
 
 static void sci_remove(struct platform_device *dev)
 {
-	struct sci_port *port = platform_get_drvdata(dev);
-	unsigned int type = port->port.type;	/* uart_remove_... clears it */
+	struct sci_port *s = platform_get_drvdata(dev);
+	unsigned int type = s->type;	/* uart_remove_... clears it */
 
-	sci_ports_in_use &= ~BIT(port->port.line);
-	uart_remove_one_port(&sci_uart_driver, &port->port);
+	sci_ports_in_use &= ~BIT(s->port.line);
+	uart_remove_one_port(&sci_uart_driver, &s->port);
 
-	if (port->port.fifosize > 1)
+	if (s->port.fifosize > 1)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_trigger);
 	if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_timeout);
@@ -3682,8 +3698,8 @@ static int sci_probe(struct platform_device *dev)
 		if (ret)
 			return ret;
 	}
-	if (sp->port.type == PORT_SCIFA || sp->port.type == PORT_SCIFB ||
-	    sp->port.type == PORT_HSCIF) {
+	if (sp->type == PORT_SCIFA || sp->type == PORT_SCIFB ||
+	    sp->type == PORT_HSCIF) {
 		ret = device_create_file(&dev->dev, &dev_attr_rx_fifo_timeout);
 		if (ret) {
 			if (sp->port.fifosize > 1) {
@@ -3799,8 +3815,11 @@ int __init scix_early_console_setup(struct earlycon_device *device,
 	if (!device->port.membase)
 		return -ENODEV;
 
-	device->port.type = data->type;
+	device->port.type = SCI_PUBLIC_PORT_ID(data->type);
+
 	sci_ports[0].port = device->port;
+	sci_ports[0].type = data->type;
+	sci_ports[0].regtype = data->regtype;
 
 	port_cfg.type = data->type;
 	port_cfg.regtype = data->regtype;
-- 
2.43.0

[PATCH v10 07/10] serial: sh-sci: Add support for RZ/T2H SCI

[Thierry Bultel]

Define a new RSCI port type, and the RSCI 32 bits registers set.
The RZ/T2H SCI has a a fifo, and a quite different set of registers
from the original SH SCI ones.
DMA is not supported yet.

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v9->v10:
  - removed unneed #ifdef in rsci.h
  - use same error message in sci_init_clocks
Changes v8->v9:
  - Fixed some code formatting
  - Renamed rzt2_sci_uart_ops to rsci_uart_ops
  - Renamed of_sci_r9a09g077_data to of_sci_rsci_data
  - Added EXPORT_SYMBOL for public functions
  - Added MODULE_LICENSE & MODULE_DESCRIPTION
  - Fixed RSCI clock names
  - Fixed SCI_PORT_RSCI using BIT(7)
Changes v7->v8:
  - s/rzsci/rsci/g
  - declared SCI_PORT_RSCI as private port ID
  - look for secondary clock
  - report error when rsci clocks are not found
Changes v6->v7:
  - Renamed compatible string to r9a09g077-rsci
Changes v5->v6:
  - Rename SERIAL_RZ_SCI_T2 to CONFIG_SERIAL_RSCI
  - Rename rz-sci-t2.{c,h} to rsci.{c,h}
  - Rename port type to PORT_RSCI
  - Rename sci_r9a09g077_data to of_sci_r9a09g077_data for consistency
Changes v4->v5:
  - Rename SERIAL_RZ_SCI to SERIAL_RZ_SCI_T2
  - Rename rzsci.{c,h} to rz-sci-t2.{c,h}
  - Rename port type to PORT_RZ_SCI_T2
  - Set sci_shutdown ops pointer (needed by systemd for having a console)
Changes v3->v4:
  - Added missing #include <bitfield.h>
  - Fix christmas tree code style in rzsci_transmit_chars.
---
 drivers/tty/serial/Kconfig         |   7 +
 drivers/tty/serial/Makefile        |   1 +
 drivers/tty/serial/rsci.c          | 468 +++++++++++++++++++++++++++++
 drivers/tty/serial/rsci.h          |  10 +
 drivers/tty/serial/sh-sci-common.h |   5 +
 drivers/tty/serial/sh-sci.c        |  53 +++-
 6 files changed, 534 insertions(+), 10 deletions(-)
 create mode 100644 drivers/tty/serial/rsci.c
 create mode 100644 drivers/tty/serial/rsci.h

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 79a8186d3361..44427415a80d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -675,6 +675,13 @@ config SERIAL_SH_SCI_DMA
 	depends on SERIAL_SH_SCI && DMA_ENGINE
 	default ARCH_RENESAS
 
+config SERIAL_RSCI
+	tristate "Support for Renesas RZ/T2H SCI variant"
+	depends on SERIAL_SH_SCI
+	help
+	  Support for the RZ/T2H SCI variant with fifo.
+	  Say Y if you want to be able to use the RZ/T2H SCI serial port.
+
 config SERIAL_HS_LPC32XX
 	tristate "LPC32XX high speed serial port support"
 	depends on ARCH_LPC32XX || COMPILE_TEST
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index d58d9f719889..a2ccbc508ec5 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_SERIAL_QCOM_GENI)		+= qcom_geni_serial.o
 obj-$(CONFIG_SERIAL_QE)			+= ucc_uart.o
 obj-$(CONFIG_SERIAL_RDA)		+= rda-uart.o
 obj-$(CONFIG_SERIAL_RP2)		+= rp2.o
+obj-$(CONFIG_SERIAL_RSCI)		+= rsci.o
 obj-$(CONFIG_SERIAL_SA1100)		+= sa1100.o
 obj-$(CONFIG_SERIAL_SAMSUNG)		+= samsung_tty.o
 obj-$(CONFIG_SERIAL_SB1250_DUART)	+= sb1250-duart.o
diff --git a/drivers/tty/serial/rsci.c b/drivers/tty/serial/rsci.c
new file mode 100644
index 000000000000..4410f9eca7b9
--- /dev/null
+++ b/drivers/tty/serial/rsci.c
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/serial_core.h>
+#include <linux/serial_sci.h>
+#include <linux/tty_flip.h>
+#include "rsci.h"
+
+/* RSCI registers */
+#define RDR	0x00
+#define TDR	0x04
+#define CCR0	0x08
+#define CCR1	0x0C
+#define CCR2	0x10
+#define CCR3	0x14
+#define CCR4	0x18
+#define FCR	0x24
+#define DCR	0x30
+#define CSR	0x48
+#define FRSR	0x50
+#define FTSR	0x54
+#define CFCLR	0x68
+#define FFCLR	0x70
+
+/* RDR (Receive Data Register) */
+#define RDR_FFER		BIT(12) /* FIFO Framing Error */
+#define RDR_FPER		BIT(11) /* FIFO Parity Error */
+#define RDR_RDAT_MSK		GENMASK(8, 0)
+
+/* TDR (Transmit Data Register) */
+#define TDR_MPBT		BIT(9)	/* Multiprocessor Transfer */
+#define TDR_TDAT_9BIT_LSHIFT	0
+#define TDR_TDAT_9BIT_VAL	0x1FF
+#define TDR_TDAT_9BIT_MSK	(TDR_TDAT_9BIT_VAL << TDR_TDAT_9BIT_LSHIFT)
+
+/* CCR0 (Common Control Register 0) */
+#define CCR0_SSE		BIT(24)	/* SSn# Pin Function Enable */
+#define CCR0_TEIE		BIT(21)	/* Transmit End Interrupt Enable */
+#define CCR0_TIE		BIT(20)	/* Transmit Interrupt Enable */
+#define CCR0_RIE		BIT(16)	/* Receive Interrupt Enable */
+#define CCR0_IDSEL		BIT(10)	/* ID Frame Select */
+#define CCR0_DCME		BIT(9)	/* Data Compare Match Enable */
+#define CCR0_MPIE		BIT(8)	/* Multiprocessor Interrupt Enable */
+#define CCR0_TE			BIT(4)	/* Transmit Enable */
+#define CCR0_RE			BIT(0)	/* Receive Enable */
+
+/* CCR1 (Common Control Register 1) */
+#define CCR1_NFEN		BIT(28)	/* Digital Noise Filter Function */
+#define CCR1_SHARPS		BIT(20)	/* Half -duplex Communication Select */
+#define CCR1_SPLP		BIT(16)	/* Loopback Control */
+#define CCR1_RINV		BIT(13)	/* RxD invert */
+#define CCR1_TINV		BIT(12)	/* TxD invert */
+#define CCR1_PM			BIT(9)	/* Parity Mode */
+#define CCR1_PE			BIT(8)	/* Parity Enable */
+#define CCR1_SPB2IO		BIT(5)	/* Serial Port Break I/O */
+#define CCR1_SPB2DT		BIT(4)	/* Serial Port Break Data Select */
+#define CCR1_CTSPEN		BIT(1)	/* CTS External Pin Enable */
+#define CCR1_CTSE		BIT(0)	/* CTS Enable */
+
+/* FCR (FIFO Control Register) */
+#define FCR_RFRST		BIT(23)	/* Receive FIFO Data Register Reset */
+#define FCR_TFRST		BIT(15)	/* Transmit FIFO Data Register Reset */
+#define FCR_DRES		BIT(0)	/* Incoming Data Ready Error Select */
+#define FCR_RTRG4_0		GENMASK(20, 16)
+#define FCR_TTRG		GENMASK(12, 8)
+
+/* CSR (Common Status Register) */
+#define CSR_RDRF		BIT(31)	/* Receive Data Full */
+#define CSR_TEND		BIT(30)	/* Transmit End Flag */
+#define CSR_TDRE		BIT(29)	/* Transmit Data Empty */
+#define CSR_FER			BIT(28)	/* Framing Error */
+#define CSR_PER			BIT(27)	/* Parity Error */
+#define CSR_MFF			BIT(26)	/* Mode Fault Error */
+#define CSR_ORER		BIT(24)	/* Overrun Error */
+#define CSR_DFER		BIT(18)	/* Data Compare Match Framing Error */
+#define CSR_DPER		BIT(17)	/* Data Compare Match Parity Error */
+#define CSR_DCMF		BIT(16)	/* Data Compare Match */
+#define CSR_RXDMON		BIT(15)	/* Serial Input Data Monitor */
+#define CSR_ERS			BIT(4)	/* Error Signal Status */
+
+#define SCxSR_ERRORS(port)	(to_sci_port(port)->params->error_mask)
+#define SCxSR_ERROR_CLEAR(port)	(to_sci_port(port)->params->error_clear)
+
+#define RSCI_DEFAULT_ERROR_MASK	(CSR_PER | CSR_FER)
+
+#define RSCI_RDxF_CLEAR		(CFCLR_RDRFC)
+#define RSCI_ERROR_CLEAR	(CFCLR_PERC | CFCLR_FERC)
+#define RSCI_TDxE_CLEAR		(CFCLR_TDREC)
+#define RSCI_BREAK_CLEAR	(CFCLR_PERC | CFCLR_FERC | CFCLR_ORERC)
+
+/* FRSR (FIFO Receive Status Register) */
+#define FRSR_R5_0		GENMASK(13, 8)	/* Receive FIFO Data Count */
+#define FRSR_DR			BIT(0)	/* Receive Data Ready */
+
+/* CFCLR (Common Flag CLear Register) */
+#define CFCLR_RDRFC		BIT(31)	/* RDRF Clear */
+#define CFCLR_TDREC		BIT(29)	/* TDRE Clear */
+#define CFCLR_FERC		BIT(28)	/* FER Clear */
+#define CFCLR_PERC		BIT(27)	/* PER Clear */
+#define CFCLR_MFFC		BIT(26)	/* MFF Clear */
+#define CFCLR_ORERC		BIT(24)	/* ORER Clear */
+#define CFCLR_DFERC		BIT(18)	/* DFER Clear */
+#define CFCLR_DPERC		BIT(17)	/* DPER Clear */
+#define CFCLR_DCMFC		BIT(16)	/* DCMF Clear */
+#define CFCLR_ERSC		BIT(4)	/* ERS Clear */
+#define CFCLR_CLRFLAG		(CFCLR_RDRFC | CFCLR_FERC | CFCLR_PERC | \
+				 CFCLR_MFFC | CFCLR_ORERC | CFCLR_DFERC | \
+				 CFCLR_DPERC | CFCLR_DCMFC | CFCLR_ERSC)
+
+/* FFCLR (FIFO Flag CLear Register) */
+#define FFCLR_DRC		BIT(0)	/* DR Clear */
+
+#define DCR_DEPOL		BIT(0)
+
+static u32 rsci_serial_in(struct uart_port *p, int offset)
+{
+	return readl(p->membase + offset);
+}
+
+static void rsci_serial_out(struct uart_port *p, int offset, int value)
+{
+	writel(value, p->membase + offset);
+}
+
+static void rsci_clear_DRxC(struct uart_port *port)
+{
+	rsci_serial_out(port, CFCLR, CFCLR_RDRFC);
+	rsci_serial_out(port, FFCLR, FFCLR_DRC);
+}
+
+static void rsci_clear_SCxSR(struct uart_port *port, unsigned int mask)
+{
+	rsci_serial_out(port, CFCLR, mask);
+}
+
+static void rsci_start_rx(struct uart_port *port)
+{
+	unsigned int ctrl;
+
+	ctrl = rsci_serial_in(port, CCR0);
+	ctrl |= CCR0_RIE;
+	rsci_serial_out(port, CCR0, ctrl);
+}
+
+static void rsci_set_termios(struct uart_port *port, struct ktermios *termios,
+			      const struct ktermios *old)
+{
+	struct sci_port *s = to_sci_port(port);
+	unsigned long flags;
+
+	sci_port_enable(s);
+	uart_port_lock_irqsave(port, &flags);
+
+	/* For now, only RX enabling is supported */
+	if (termios->c_cflag & CREAD)
+		rsci_start_rx(port);
+
+	uart_port_unlock_irqrestore(port, flags);
+	sci_port_disable(s);
+}
+
+static int rsci_txfill(struct uart_port *port)
+{
+	return rsci_serial_in(port, FTSR);
+}
+
+static int rsci_rxfill(struct uart_port *port)
+{
+	u32 val = rsci_serial_in(port, FRSR);
+
+	return FIELD_GET(FRSR_R5_0, val);
+}
+
+static unsigned int rsci_tx_empty(struct uart_port *port)
+{
+	unsigned int status = rsci_serial_in(port, CSR);
+	unsigned int in_tx_fifo = rsci_txfill(port);
+
+	return (status & CSR_TEND) && !in_tx_fifo ? TIOCSER_TEMT : 0;
+}
+
+static void rsci_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* Not supported yet */
+}
+
+static unsigned int rsci_get_mctrl(struct uart_port *port)
+{
+	/* Not supported yet */
+	return 0;
+}
+
+static void rsci_clear_CFC(struct uart_port *port, unsigned int mask)
+{
+	rsci_serial_out(port, CFCLR, mask);
+}
+
+static void rsci_start_tx(struct uart_port *port)
+{
+	struct sci_port *sp = to_sci_port(port);
+	u32 ctrl;
+
+	if (sp->chan_tx)
+		return;
+
+	/*
+	 * TE (Transmit Enable) must be set after setting TIE
+	 * (Transmit Interrupt Enable) or in the same instruction
+	 * to start the transmit process.
+	 */
+	ctrl = rsci_serial_in(port, CCR0);
+	ctrl |= CCR0_TIE | CCR0_TE;
+	rsci_serial_out(port, CCR0, ctrl);
+}
+
+static void rsci_stop_tx(struct uart_port *port)
+{
+	u32 ctrl;
+
+	ctrl = rsci_serial_in(port, CCR0);
+	ctrl &= ~CCR0_TIE;
+	rsci_serial_out(port, CCR0, ctrl);
+}
+
+static void rsci_stop_rx(struct uart_port *port)
+{
+	u32 ctrl;
+
+	ctrl = rsci_serial_in(port, CCR0);
+	ctrl &= ~CCR0_RIE;
+	rsci_serial_out(port, CCR0, ctrl);
+}
+
+static int rsci_txroom(struct uart_port *port)
+{
+	return port->fifosize - rsci_txfill(port);
+}
+
+static void rsci_transmit_chars(struct uart_port *port)
+{
+	unsigned int stopped = uart_tx_stopped(port);
+	struct tty_port *tport = &port->state->port;
+	u32 status, ctrl;
+	int count;
+
+	status = rsci_serial_in(port, CSR);
+	if (!(status & CSR_TDRE)) {
+		ctrl = rsci_serial_in(port, CCR0);
+		if (kfifo_is_empty(&tport->xmit_fifo))
+			ctrl &= ~CCR0_TIE;
+		else
+			ctrl |= CCR0_TIE;
+		rsci_serial_out(port, CCR0, ctrl);
+		return;
+	}
+
+	count = rsci_txroom(port);
+
+	do {
+		unsigned char c;
+
+		if (port->x_char) {
+			c = port->x_char;
+			port->x_char = 0;
+		} else if (stopped || !kfifo_get(&tport->xmit_fifo, &c)) {
+			break;
+		}
+
+		rsci_clear_CFC(port, CFCLR_TDREC);
+		rsci_serial_out(port, TDR, c);
+
+		port->icount.tx++;
+	} while (--count > 0);
+
+	if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (kfifo_is_empty(&tport->xmit_fifo)) {
+		ctrl = rsci_serial_in(port, CCR0);
+		ctrl &= ~CCR0_TIE;
+		ctrl |= CCR0_TEIE;
+		rsci_serial_out(port, CCR0, ctrl);
+	}
+}
+
+static void rsci_receive_chars(struct uart_port *port)
+{
+	struct tty_port *tport = &port->state->port;
+	u32 rdat, status, frsr_status = 0;
+	int i, count, copied = 0;
+	unsigned char flag;
+
+	status = rsci_serial_in(port, CSR);
+	frsr_status = rsci_serial_in(port, FRSR);
+
+	if (!(status & CSR_RDRF) && !(frsr_status & FRSR_DR))
+		return;
+
+	while (1) {
+		/* Don't copy more bytes than there is room for in the buffer */
+		count = tty_buffer_request_room(tport, rsci_rxfill(port));
+
+		/* If for any reason we can't copy more data, we're done! */
+		if (count == 0)
+			break;
+
+		for (i = 0; i < count; i++) {
+			char c;
+
+			rdat = rsci_serial_in(port, RDR);
+			/* 9-bits data is not supported yet */
+			c = rdat & RDR_RDAT_MSK;
+
+			if (uart_handle_sysrq_char(port, c)) {
+				count--;
+				i--;
+				continue;
+			}
+
+			/* Store data and status.
+			 * Non FIFO mode is not supported
+			 */
+			if (rdat & RDR_FFER) {
+				flag = TTY_FRAME;
+				port->icount.frame++;
+			} else if (rdat & RDR_FPER) {
+				flag = TTY_PARITY;
+				port->icount.parity++;
+			} else {
+				flag = TTY_NORMAL;
+			}
+
+			tty_insert_flip_char(tport, c, flag);
+		}
+
+		rsci_serial_in(port, CSR); /* dummy read */
+		rsci_clear_DRxC(port);
+
+		copied += count;
+		port->icount.rx += count;
+	}
+
+	if (copied) {
+		/* Tell the rest of the system the news. New characters! */
+		tty_flip_buffer_push(tport);
+	} else {
+		/* TTY buffers full; read from RX reg to prevent lockup */
+		rsci_serial_in(port, RDR);
+		rsci_serial_in(port, CSR); /* dummy read */
+		rsci_clear_DRxC(port);
+	}
+}
+
+static void rsci_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	u32 status;
+	int ret;
+
+	ret = readl_relaxed_poll_timeout_atomic(port->membase + CSR, status,
+						(status & CSR_TDRE), 100,
+						USEC_PER_SEC);
+	if (ret != 0) {
+		dev_err(port->dev,
+			"Error while sending data in UART TX : %d\n", ret);
+		goto done;
+	}
+	rsci_serial_out(port, TDR, c);
+done:
+	rsci_clear_SCxSR(port, CFCLR_TDREC);
+}
+
+static void rsci_prepare_console_write(struct uart_port *port, u32 ctrl)
+{
+	struct sci_port *s = to_sci_port(port);
+	u32 ctrl_temp =
+		s->params->param_bits->rxtx_enable | CCR0_TIE |
+		s->hscif_tot;
+	rsci_serial_out(port, CCR0, ctrl_temp);
+}
+
+static const char *rsci_type(struct uart_port *port)
+{
+	return "rsci";
+}
+
+static size_t rsci_suspend_regs_size(void)
+{
+	return 0;
+}
+
+static const struct sci_common_regs rsci_common_regs = {
+	.status = CSR,
+	.control = CCR0,
+};
+
+static const struct sci_port_params_bits rsci_port_param_bits = {
+	.rxtx_enable = CCR0_RE | CCR0_TE,
+	.te_clear = CCR0_TE | CCR0_TEIE,
+	.poll_sent_bits = CSR_TDRE | CSR_TEND,
+};
+
+static const struct sci_port_params rsci_port_params = {
+	.fifosize = 16,
+	.overrun_reg = CSR,
+	.overrun_mask = CSR_ORER,
+	.sampling_rate_mask = SCI_SR(32),
+	.error_mask = RSCI_DEFAULT_ERROR_MASK,
+	.error_clear = RSCI_ERROR_CLEAR,
+	.param_bits = &rsci_port_param_bits,
+	.common_regs = &rsci_common_regs,
+};
+
+static const struct uart_ops rsci_uart_ops = {
+	.tx_empty	= rsci_tx_empty,
+	.set_mctrl	= rsci_set_mctrl,
+	.get_mctrl	= rsci_get_mctrl,
+	.start_tx	= rsci_start_tx,
+	.stop_tx	= rsci_stop_tx,
+	.stop_rx	= rsci_stop_rx,
+	.startup	= sci_startup,
+	.shutdown	= sci_shutdown,
+	.set_termios	= rsci_set_termios,
+	.pm		= sci_pm,
+	.type		= rsci_type,
+	.release_port	= sci_release_port,
+	.request_port	= sci_request_port,
+	.config_port	= sci_config_port,
+	.verify_port	= sci_verify_port,
+};
+
+static const struct sci_port_ops rsci_port_ops = {
+	.read_reg		= rsci_serial_in,
+	.write_reg		= rsci_serial_out,
+	.clear_SCxSR		= rsci_clear_SCxSR,
+	.transmit_chars		= rsci_transmit_chars,
+	.receive_chars		= rsci_receive_chars,
+	.poll_put_char		= rsci_poll_put_char,
+	.prepare_console_write	= rsci_prepare_console_write,
+	.suspend_regs_size	= rsci_suspend_regs_size,
+};
+
+struct sci_of_data of_sci_rsci_data = {
+	.type = SCI_PORT_RSCI,
+	.ops = &rsci_port_ops,
+	.uart_ops = &rsci_uart_ops,
+	.params = &rsci_port_params,
+};
+
+#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
+
+static int __init rsci_early_console_setup(struct earlycon_device *device,
+					       const char *opt)
+{
+	return scix_early_console_setup(device, &of_sci_rsci_data);
+}
+
+OF_EARLYCON_DECLARE(rsci, "renesas,r9a09g077-rsci", rsci_early_console_setup);
+
+#endif /* CONFIG_SERIAL_SH_SCI_EARLYCON */
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("RSCI serial driver");
diff --git a/drivers/tty/serial/rsci.h b/drivers/tty/serial/rsci.h
new file mode 100644
index 000000000000..2af3f28b465a
--- /dev/null
+++ b/drivers/tty/serial/rsci.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __RSCI_H__
+#define __RSCI_H__
+
+#include "sh-sci-common.h"
+
+extern struct sci_of_data of_sci_rsci_data;
+
+#endif /* __RSCI_H__ */
diff --git a/drivers/tty/serial/sh-sci-common.h b/drivers/tty/serial/sh-sci-common.h
index fcddf66780c9..e3c028df14f1 100644
--- a/drivers/tty/serial/sh-sci-common.h
+++ b/drivers/tty/serial/sh-sci-common.h
@@ -5,6 +5,11 @@
 
 #include <linux/serial_core.h>
 
+/* Private port IDs */
+enum SCI_PORT_TYPE {
+	SCI_PORT_RSCI = BIT(7) | 0,
+};
+
 enum SCI_CLKS {
 	SCI_FCK,		/* Functional Clock */
 	SCI_SCK,		/* Optional External Clock */
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index be719c0db64a..ec226b63e943 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -54,6 +54,7 @@
 #include <asm/platform_early.h>
 #endif
 
+#include "rsci.h"
 #include "serial_mctrl_gpio.h"
 #include "sh-sci.h"
 #include "sh-sci-common.h"
@@ -550,6 +551,7 @@ void sci_port_enable(struct sci_port *sci_port)
 	}
 	sci_port->port.uartclk = sci_port->clk_rates[SCI_FCK];
 }
+EXPORT_SYMBOL(sci_port_enable);
 
 void sci_port_disable(struct sci_port *sci_port)
 {
@@ -563,6 +565,7 @@ void sci_port_disable(struct sci_port *sci_port)
 
 	pm_runtime_put_sync(sci_port->port.dev);
 }
+EXPORT_SYMBOL(sci_port_disable);
 
 static inline unsigned long port_rx_irq_mask(struct uart_port *port)
 {
@@ -1828,7 +1831,7 @@ static irqreturn_t sci_tx_end_interrupt(int irq, void *ptr)
 	unsigned long flags;
 	u32 ctrl;
 
-	if (s->type != PORT_SCI)
+	if (s->type != PORT_SCI && s->type != SCI_PORT_RSCI)
 		return sci_tx_interrupt(irq, ptr);
 
 	uart_port_lock_irqsave(port, &flags);
@@ -2289,6 +2292,7 @@ int sci_startup(struct uart_port *port)
 
 	return 0;
 }
+EXPORT_SYMBOL(sci_startup);
 
 void sci_shutdown(struct uart_port *port)
 {
@@ -2319,6 +2323,7 @@ void sci_shutdown(struct uart_port *port)
 	sci_free_irq(s);
 	sci_free_dma(port);
 }
+EXPORT_SYMBOL(sci_shutdown);
 
 static int sci_sck_calc(struct sci_port *s, unsigned int bps,
 			unsigned int *srr)
@@ -2750,6 +2755,7 @@ void sci_pm(struct uart_port *port, unsigned int state,
 		break;
 	}
 }
+EXPORT_SYMBOL(sci_pm);
 
 static const char *sci_type(struct uart_port *port)
 {
@@ -2812,6 +2818,7 @@ void sci_release_port(struct uart_port *port)
 
 	release_mem_region(port->mapbase, sport->reg_size);
 }
+EXPORT_SYMBOL(sci_release_port);
 
 int sci_request_port(struct uart_port *port)
 {
@@ -2834,6 +2841,7 @@ int sci_request_port(struct uart_port *port)
 
 	return 0;
 }
+EXPORT_SYMBOL(sci_request_port);
 
 void sci_config_port(struct uart_port *port, int flags)
 {
@@ -2843,6 +2851,7 @@ void sci_config_port(struct uart_port *port, int flags)
 		sci_request_port(port);
 	}
 }
+EXPORT_SYMBOL(sci_config_port);
 
 int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
@@ -2852,6 +2861,7 @@ int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 
 	return 0;
 }
+EXPORT_SYMBOL(sci_verify_port);
 
 static void sci_prepare_console_write(struct uart_port *port, u32 ctrl)
 {
@@ -2977,14 +2987,27 @@ static int sci_init_clocks(struct sci_port *sci_port, struct device *dev)
 	struct clk *clk;
 	unsigned int i;
 
-	if (sci_port->type == PORT_HSCIF)
+	if (sci_port->type == PORT_HSCIF) {
 		clk_names[SCI_SCK] = "hsck";
+	} else if (sci_port->type == SCI_PORT_RSCI) {
+		clk_names[SCI_FCK] = "operation";
+		clk_names[SCI_BRG_INT] = "bus";
+	}
 
 	for (i = 0; i < SCI_NUM_CLKS; i++) {
-		clk = devm_clk_get_optional(dev, clk_names[i]);
+		const char *name = clk_names[i];
+
+		clk = devm_clk_get_optional(dev, name);
 		if (IS_ERR(clk))
 			return PTR_ERR(clk);
 
+		if (!clk && sci_port->type == SCI_PORT_RSCI &&
+		    (i == SCI_FCK || i == SCI_BRG_INT)) {
+			return dev_err_probe(dev, -ENODEV,
+					     "failed to get %s\n",
+					     name);
+		}
+
 		if (!clk && i == SCI_FCK) {
 			/*
 			 * Not all SH platforms declare a clock lookup entry
@@ -2995,13 +3018,13 @@ static int sci_init_clocks(struct sci_port *sci_port, struct device *dev)
 			if (IS_ERR(clk))
 				return dev_err_probe(dev, PTR_ERR(clk),
 						     "failed to get %s\n",
-						     clk_names[i]);
+						     name);
 		}
 
 		if (!clk)
-			dev_dbg(dev, "failed to get %s\n", clk_names[i]);
+			dev_dbg(dev, "failed to get %s\n", name);
 		else
-			dev_dbg(dev, "clk %s is %pC rate %lu\n", clk_names[i],
+			dev_dbg(dev, "clk %s is %pC rate %lu\n", name,
 				clk, clk_get_rate(clk));
 		sci_port->clks[i] = clk;
 	}
@@ -3085,10 +3108,10 @@ static int sci_init_single(struct platform_device *dev,
 	}
 
 	/*
-	 * The fourth interrupt on SCI port is transmit end interrupt, so
+	 * The fourth interrupt on SCI and RSCI port is transmit end interrupt, so
 	 * shuffle the interrupts.
 	 */
-	if (p->type == PORT_SCI)
+	if (p->type == PORT_SCI || p->type == SCI_PORT_RSCI)
 		swap(sci_port->irqs[SCIx_BRI_IRQ], sci_port->irqs[SCIx_TEI_IRQ]);
 
 	/* The SCI generates several interrupts. They can be muxed together or
@@ -3122,6 +3145,9 @@ static int sci_init_single(struct platform_device *dev,
 		else
 			sci_port->rx_trigger = 8;
 		break;
+	case SCI_PORT_RSCI:
+		sci_port->rx_trigger = 15;
+		break;
 	default:
 		sci_port->rx_trigger = 1;
 		break;
@@ -3346,7 +3372,8 @@ static void sci_remove(struct platform_device *dev)
 
 	if (s->port.fifosize > 1)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_trigger);
-	if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF)
+	if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF ||
+	    type == SCI_PORT_RSCI)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_timeout);
 }
 
@@ -3440,6 +3467,12 @@ static const struct of_device_id of_sci_match[] __maybe_unused = {
 		.compatible = "renesas,scif-r9a09g057",
 		.data = &of_sci_scif_rzv2h,
 	},
+#ifdef CONFIG_SERIAL_RSCI
+	{
+		.compatible = "renesas,r9a09g077-rsci",
+		.data = &of_sci_rsci_data,
+	},
+#endif	/* CONFIG_SERIAL_RSCI */
 	/* Family-specific types */
 	{
 		.compatible = "renesas,rcar-gen1-scif",
@@ -3699,7 +3732,7 @@ static int sci_probe(struct platform_device *dev)
 			return ret;
 	}
 	if (sp->type == PORT_SCIFA || sp->type == PORT_SCIFB ||
-	    sp->type == PORT_HSCIF) {
+	    sp->type == PORT_HSCIF || sp->type == SCI_PORT_RSCI) {
 		ret = device_create_file(&dev->dev, &dev_attr_rx_fifo_timeout);
 		if (ret) {
 			if (sp->port.fifosize > 1) {
-- 
2.43.0

[PATCH v10 08/10] arm64: dts: renesas: Add initial support for renesas RZ/T2H SoC

[Thierry Bultel]

Add the initial dtsi for the RZ/T2H Soc:

- gic
- armv8-timer
- cpg clock
- sci0 uart

also add arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi, that keeps
all 4 CPUs enabled, for consistency with later support of -m24
and -m04 SoC revisions, that only have 2 and 1 Cortex-A55, respectively,
and that will use /delete-node/ to disable the missing CPUs.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v9->v10: none
Changes v8->v9:
  - Fixed RCSI clock names
  - No longer uses removed R9A09G077_PCLK_SCI0 definition
Changes v7->v8:
  - removed loco clock
  - added sci0 secondary clock
Changes v6->v7:
  - Renamed compatible string to r9a09g077-rsci
Changes v5->v6: none
Changes v4->v5: none
Changes v3->v4: none
---
 arch/arm64/boot/dts/renesas/r9a09g077.dtsi    | 122 ++++++++++++++++++
 arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi |  13 ++
 2 files changed, 135 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a09g077.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r9a09g077.dtsi b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi
new file mode 100644
index 000000000000..48b889da9095
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r9a09g077";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		l3_ca55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-level = <3>;
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&l3_ca55>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&l3_ca55>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			device_type = "cpu";
+			next-level-cache = <&l3_ca55>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			device_type = "cpu";
+			next-level-cache = <&l3_ca55>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sci0: serial@80005000 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x80005000 0 0x400>;
+			interrupts = <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@80280000 {
+			compatible = "renesas,r9a09g077-cpg-mssr";
+			reg = <0 0x80280000 0 0x1000>,
+			      <0 0x81280000 0 0x9000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		gic: interrupt-controller@83000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x83000000 0 0x40000>,
+			      <0x0 0x83040000 0 0x160000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi b/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi
new file mode 100644
index 000000000000..6f4a11b39d12
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H 4-core SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g077.dtsi"
+
+/ {
+	compatible = "renesas,r9a09g077m44", "renesas,r9a09g077";
+};
-- 
2.43.0

[PATCH v10 09/10] arm64: dts: renesas: Add initial support for renesas RZ/T2H eval board

[Thierry Bultel]

Add the initial device tree for the RZ/T2H evaluation board.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v9->v10: none
Changes v8->v9:
  - Makefile: keep the alphabetical order
Changes v7->v8:
  - removed loco clock
  - fixed checkpatch warning
Changes v6->v7:
  - lands in arm64 directory instead of arm
Changes v5->v6: rebased on next-20250331
Changes v4->v5: none
Changes v3->v4: none
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 .../dts/renesas/r9a09g077m44-rzt2h-evk.dts    | 31 +++++++++++++++++++
 2 files changed, 33 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index b24dddee3827..c6b4a868f387 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -161,5 +161,7 @@ dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk.dtb
 dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk.dtb
 dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h48-kakip.dtb
 
+dtb-$(CONFIG_ARCH_R9A09G077) += r9a09g077m44-rzt2h-evk.dtb
+
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo
diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
new file mode 100644
index 000000000000..bbacdca1959e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H Development EVK board
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include "r9a09g077m44.dtsi"
+
+/ {
+	model = "Renesas Development EVK based on r9a09g077m44";
+	compatible = "renesas,rzt2h-evk", "renesas,r9a09g077m44", "renesas,r9a09g077";
+
+	aliases {
+		serial0 = &sci0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&extal_clk {
+	clock-frequency = <25000000>;
+};
+
+&sci0 {
+	status = "okay";
+};
-- 
2.43.0

[PATCH v10 10/10] arm64: defconfig: Enable Renesas RZ/T2H serial SCI

[Thierry Bultel]

Selects RZ/T2H (aka r9a09g077) SCI (serial) specific code.

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v9->v10: none
Changes v8->v9: none
Changes v7->v8: none
Changes v6->v7: none
Changes v5->v6:
   - Renamed CONFIG_SERIAL_RZ_SCI_T2 to CONFIG_SERIAL_RSCI
Changes v4->v5:
   - Renamed CONFIG_SERIAL_RZ_SCI to CONFIG_SERIAL_RZ_SCI_T2
Changes v3->v4:
   - Remove CONFIG_ARCH_R9A09G077=y
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 04619fe7e22a..bd2aeb7c13a7 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -495,6 +495,7 @@ CONFIG_SERIAL_TEGRA_TCU=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_RSCI=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_QCOM_GENI=y
-- 
2.43.0

Re: [PATCH v10 01/10] dt-bindings: serial: Added secondary clock for RZ/T2H RSCI

[Geert Uytterhoeven]

On Fri, 23 May 2025 at 16:24, Thierry Bultel
<thierry.bultel.yh@bp.renesas.com> wrote:
> At boot, the default clock is the PCLKM core clock (synchronous
> clock, which is enabled by the bootloader).
> For different baudrates, the asynchronous clock input must be used.
> Clock selection is made by an internal register of RCSI.
>
> Add the optional "sck", external clock input.
>
> Also remove the unneeded serial0 alias from the dts example.
>
> Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
> ---
> Changes v9->v10:
>  - mention sck in description
>  - no maxItems on clock-names
>  - fixed the #include dependency in dts example

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v10 07/10] serial: sh-sci: Add support for RZ/T2H SCI

[Geert Uytterhoeven]

On Fri, 23 May 2025 at 16:24, Thierry Bultel
<thierry.bultel.yh@bp.renesas.com> wrote:
> Define a new RSCI port type, and the RSCI 32 bits registers set.
> The RZ/T2H SCI has a a fifo, and a quite different set of registers
> from the original SH SCI ones.
> DMA is not supported yet.
>
> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
> ---
> Changes v9->v10:
>   - removed unneed #ifdef in rsci.h
>   - use same error message in sci_init_clocks

LGTM, so
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v10 01/10] dt-bindings: serial: Added secondary clock for RZ/T2H RSCI

[Rob Herring]

On Fri, May 23, 2025 at 04:24:05PM +0200, Thierry Bultel wrote:
> At boot, the default clock is the PCLKM core clock (synchronous
> clock, which is enabled by the bootloader).
> For different baudrates, the asynchronous clock input must be used.
> Clock selection is made by an internal register of RCSI.
> 
> Add the optional "sck", external clock input.
> 
> Also remove the unneeded serial0 alias from the dts example.
> 
> Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
> ---
> Changes v9->v10:
>  - mention sck in description
>  - no maxItems on clock-names
>  - fixed the #include dependency in dts example
> Changes v8->v9:
>  - typo in description
>  - named clocks 'operational' and 'bus', and added optional 'sck' clock
>  - uses value of 2nd core clock in example to break the dependency on cpg patch
> ---
>  .../bindings/serial/renesas,rsci.yaml           | 17 +++++++++--------
>  1 file changed, 9 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
> index ea879db5f485..1bf255407df0 100644
> --- a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
> +++ b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
> @@ -35,10 +35,15 @@ properties:
>        - const: tei
>  
>    clocks:
> -    maxItems: 1
> +    minItems: 2
> +    maxItems: 3
>  
>    clock-names:
> -    const: fck # UART functional clock
> +    minItems: 2
> +    items:
> +      - const: operation
> +      - const: bus
> +      - const: sck # optional external clock input

You can't just change the clock names. What happens to users of 'fck'?

And you can't make additional entries required. What happens to users 
with only 1 clock defined?

Rob

Re: [PATCH v10 01/10] dt-bindings: serial: Added secondary clock for RZ/T2H RSCI

[Geert Uytterhoeven]

Hi Rob,

On Thu, 5 Jun 2025 at 16:39, Rob Herring <robh@kernel.org> wrote:
> On Fri, May 23, 2025 at 04:24:05PM +0200, Thierry Bultel wrote:
> > At boot, the default clock is the PCLKM core clock (synchronous
> > clock, which is enabled by the bootloader).
> > For different baudrates, the asynchronous clock input must be used.
> > Clock selection is made by an internal register of RCSI.
> >
> > Add the optional "sck", external clock input.
> >
> > Also remove the unneeded serial0 alias from the dts example.
> >
> > Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
> > ---
> > Changes v9->v10:
> >  - mention sck in description
> >  - no maxItems on clock-names
> >  - fixed the #include dependency in dts example
> > Changes v8->v9:
> >  - typo in description
> >  - named clocks 'operational' and 'bus', and added optional 'sck' clock
> >  - uses value of 2nd core clock in example to break the dependency on cpg patch
> > ---
> >  .../bindings/serial/renesas,rsci.yaml           | 17 +++++++++--------
> >  1 file changed, 9 insertions(+), 8 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
> > index ea879db5f485..1bf255407df0 100644
> > --- a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
> > +++ b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
> > @@ -35,10 +35,15 @@ properties:
> >        - const: tei
> >
> >    clocks:
> > -    maxItems: 1
> > +    minItems: 2
> > +    maxItems: 3
> >
> >    clock-names:
> > -    const: fck # UART functional clock
> > +    minItems: 2
> > +    items:
> > +      - const: operation
> > +      - const: bus
> > +      - const: sck # optional external clock input
>
> You can't just change the clock names. What happens to users of 'fck'?
>
> And you can't make additional entries required. What happens to users
> with only 1 clock defined?

There are no users of the bindings yet, and the RSCI driver updates haven't
reached linux-next yet.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds