[PATCH 0/3] usb: typec: tcpm/tcpci_maxim: irq wake and other updates

[PATCH 0/3] usb: typec: tcpm/tcpci_maxim: irq wake and other updates

[André Draszik]

These patches fix a few small issues with the Maxim TCPCi driver.

Most importantly, the driver never calls disable_irq_wake(), and while
looking into that, I noticed a few other possible cleanups.

Please see the individual patches, they're self-explanatory, I believe.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
André Draszik (3):
      usb: typec: tcpm/tcpci_maxim: fix irq wake usage
      usb: typec: tcpm/tcpci_maxim: drop CONFIG_OF
      usb: typec: tcpm/tcpci_maxim: enable PROBE_PREFER_ASYNCHRONOUS

 drivers/usb/typec/tcpm/tcpci_maxim_core.c | 51 +++++++++++++++++++------------
 1 file changed, 32 insertions(+), 19 deletions(-)
---
base-commit: 50c8770a42faf8b1c7abe93e7c114337f580a97d
change-id: 20250707-max77759-irq-wake-1ffda8371c5f

Best regards,
-- 
André Draszik <andre.draszik@linaro.org>

[PATCH 1/3] usb: typec: tcpm/tcpci_maxim: fix irq wake usage

[André Draszik]

This driver calls enable_irq_wake() during probe() unconditionally, and
never issues the required corresponding disable_irq_wake() to disable
hardware interrupt wakeup signals.

Additionally, whether or not a device should wake-up the system is
meant to be a policy decision based on sysfs (.../power/wakeup) in the
first place.

Update the driver to use the standard approach to enable/disable IRQ
wake during the suspend/resume callbacks. This solves both issues
described above.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/usb/typec/tcpm/tcpci_maxim_core.c | 46 ++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
index b5a5ed40faea9cfcceef5550263968148646eb44..ff3604be79da73ca5acff7b5b2434c116ed12ef8 100644
--- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c
+++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
@@ -421,21 +421,6 @@ static irqreturn_t max_tcpci_isr(int irq, void *dev_id)
 	return IRQ_WAKE_THREAD;
 }
 
-static int max_tcpci_init_alert(struct max_tcpci_chip *chip, struct i2c_client *client)
-{
-	int ret;
-
-	ret = devm_request_threaded_irq(chip->dev, client->irq, max_tcpci_isr, max_tcpci_irq,
-					(IRQF_TRIGGER_LOW | IRQF_ONESHOT), dev_name(chip->dev),
-					chip);
-
-	if (ret < 0)
-		return ret;
-
-	enable_irq_wake(client->irq);
-	return 0;
-}
-
 static int max_tcpci_start_toggling(struct tcpci *tcpci, struct tcpci_data *tdata,
 				    enum typec_cc_status cc)
 {
@@ -532,7 +517,9 @@ static int max_tcpci_probe(struct i2c_client *client)
 
 	chip->port = tcpci_get_tcpm_port(chip->tcpci);
 
-	ret = max_tcpci_init_alert(chip, client);
+	ret = devm_request_threaded_irq(&client->dev, client->irq, max_tcpci_isr, max_tcpci_irq,
+					(IRQF_TRIGGER_LOW | IRQF_ONESHOT), dev_name(chip->dev),
+					chip);
 	if (ret < 0)
 		return dev_err_probe(&client->dev, ret,
 				     "IRQ initialization failed\n");
@@ -544,6 +531,32 @@ static int max_tcpci_probe(struct i2c_client *client)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int max_tcpci_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret = 0;
+
+	if (client->irq && device_may_wakeup(dev))
+		ret = disable_irq_wake(client->irq);
+
+	return ret;
+}
+
+static int max_tcpci_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret = 0;
+
+	if (client->irq && device_may_wakeup(dev))
+		ret = enable_irq_wake(client->irq);
+
+	return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(max_tcpci_pm_ops, max_tcpci_suspend, max_tcpci_resume);
+
 static const struct i2c_device_id max_tcpci_id[] = {
 	{ "maxtcpc" },
 	{ }
@@ -562,6 +575,7 @@ static struct i2c_driver max_tcpci_i2c_driver = {
 	.driver = {
 		.name = "maxtcpc",
 		.of_match_table = of_match_ptr(max_tcpci_of_match),
+		.pm = &max_tcpci_pm_ops,
 	},
 	.probe = max_tcpci_probe,
 	.id_table = max_tcpci_id,

-- 
2.50.0.727.gbf7dc18ff4-goog

[PATCH 2/3] usb: typec: tcpm/tcpci_maxim: drop CONFIG_OF

[André Draszik]

The general recommendation is to not use of_match_ptr() or CONFIG_OF
ifdef.

Drop them.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/usb/typec/tcpm/tcpci_maxim_core.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
index ff3604be79da73ca5acff7b5b2434c116ed12ef8..43b0ec2d12ba6d4c1cfccbfd355af3e5d9ce1385 100644
--- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c
+++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
@@ -563,18 +563,16 @@ static const struct i2c_device_id max_tcpci_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, max_tcpci_id);
 
-#ifdef CONFIG_OF
 static const struct of_device_id max_tcpci_of_match[] = {
 	{ .compatible = "maxim,max33359", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, max_tcpci_of_match);
-#endif
 
 static struct i2c_driver max_tcpci_i2c_driver = {
 	.driver = {
 		.name = "maxtcpc",
-		.of_match_table = of_match_ptr(max_tcpci_of_match),
+		.of_match_table = max_tcpci_of_match,
 		.pm = &max_tcpci_pm_ops,
 	},
 	.probe = max_tcpci_probe,

-- 
2.50.0.727.gbf7dc18ff4-goog

[PATCH 3/3] usb: typec: tcpm/tcpci_maxim: enable PROBE_PREFER_ASYNCHRONOUS

[André Draszik]

This driver works fine with asynchronous probe.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/usb/typec/tcpm/tcpci_maxim_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
index 43b0ec2d12ba6d4c1cfccbfd355af3e5d9ce1385..19f63865079658fb2a446dc390262d141b940e9a 100644
--- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c
+++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
@@ -572,6 +572,7 @@ MODULE_DEVICE_TABLE(of, max_tcpci_of_match);
 static struct i2c_driver max_tcpci_i2c_driver = {
 	.driver = {
 		.name = "maxtcpc",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 		.of_match_table = max_tcpci_of_match,
 		.pm = &max_tcpci_pm_ops,
 	},

-- 
2.50.0.727.gbf7dc18ff4-goog

Re: [PATCH 1/3] usb: typec: tcpm/tcpci_maxim: fix irq wake usage

[Badhri Jagan Sridharan]

On Mon, Jul 7, 2025 at 3:50 AM André Draszik <andre.draszik@linaro.org> wrote:
>
> This driver calls enable_irq_wake() during probe() unconditionally, and
> never issues the required corresponding disable_irq_wake() to disable
> hardware interrupt wakeup signals.
>
> Additionally, whether or not a device should wake-up the system is
> meant to be a policy decision based on sysfs (.../power/wakeup) in the
> first place.
>
> Update the driver to use the standard approach to enable/disable IRQ
> wake during the suspend/resume callbacks. This solves both issues
> described above.
>
> Signed-off-by: André Draszik <andre.draszik@linaro.org>

Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>

> ---
>  drivers/usb/typec/tcpm/tcpci_maxim_core.c | 46 ++++++++++++++++++++-----------
>  1 file changed, 30 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> index b5a5ed40faea9cfcceef5550263968148646eb44..ff3604be79da73ca5acff7b5b2434c116ed12ef8 100644
> --- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> +++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> @@ -421,21 +421,6 @@ static irqreturn_t max_tcpci_isr(int irq, void *dev_id)
>         return IRQ_WAKE_THREAD;
>  }
>
> -static int max_tcpci_init_alert(struct max_tcpci_chip *chip, struct i2c_client *client)
> -{
> -       int ret;
> -
> -       ret = devm_request_threaded_irq(chip->dev, client->irq, max_tcpci_isr, max_tcpci_irq,
> -                                       (IRQF_TRIGGER_LOW | IRQF_ONESHOT), dev_name(chip->dev),
> -                                       chip);
> -
> -       if (ret < 0)
> -               return ret;
> -
> -       enable_irq_wake(client->irq);
> -       return 0;
> -}
> -
>  static int max_tcpci_start_toggling(struct tcpci *tcpci, struct tcpci_data *tdata,
>                                     enum typec_cc_status cc)
>  {
> @@ -532,7 +517,9 @@ static int max_tcpci_probe(struct i2c_client *client)
>
>         chip->port = tcpci_get_tcpm_port(chip->tcpci);
>
> -       ret = max_tcpci_init_alert(chip, client);
> +       ret = devm_request_threaded_irq(&client->dev, client->irq, max_tcpci_isr, max_tcpci_irq,
> +                                       (IRQF_TRIGGER_LOW | IRQF_ONESHOT), dev_name(chip->dev),
> +                                       chip);
>         if (ret < 0)
>                 return dev_err_probe(&client->dev, ret,
>                                      "IRQ initialization failed\n");
> @@ -544,6 +531,32 @@ static int max_tcpci_probe(struct i2c_client *client)
>         return 0;
>  }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int max_tcpci_resume(struct device *dev)
> +{
> +       struct i2c_client *client = to_i2c_client(dev);
> +       int ret = 0;
> +
> +       if (client->irq && device_may_wakeup(dev))
> +               ret = disable_irq_wake(client->irq);
> +
> +       return ret;
> +}
> +
> +static int max_tcpci_suspend(struct device *dev)
> +{
> +       struct i2c_client *client = to_i2c_client(dev);
> +       int ret = 0;
> +
> +       if (client->irq && device_may_wakeup(dev))
> +               ret = enable_irq_wake(client->irq);
> +
> +       return ret;
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +static SIMPLE_DEV_PM_OPS(max_tcpci_pm_ops, max_tcpci_suspend, max_tcpci_resume);
> +
>  static const struct i2c_device_id max_tcpci_id[] = {
>         { "maxtcpc" },
>         { }
> @@ -562,6 +575,7 @@ static struct i2c_driver max_tcpci_i2c_driver = {
>         .driver = {
>                 .name = "maxtcpc",
>                 .of_match_table = of_match_ptr(max_tcpci_of_match),
> +               .pm = &max_tcpci_pm_ops,
>         },
>         .probe = max_tcpci_probe,
>         .id_table = max_tcpci_id,
>
> --
> 2.50.0.727.gbf7dc18ff4-goog
>

Re: [PATCH 2/3] usb: typec: tcpm/tcpci_maxim: drop CONFIG_OF

[Badhri Jagan Sridharan]

On Mon, Jul 7, 2025 at 3:50 AM André Draszik <andre.draszik@linaro.org> wrote:
>
> The general recommendation is to not use of_match_ptr() or CONFIG_OF
> ifdef.
>
> Drop them.
>
> Signed-off-by: André Draszik <andre.draszik@linaro.org>

Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>

> ---
>  drivers/usb/typec/tcpm/tcpci_maxim_core.c | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> index ff3604be79da73ca5acff7b5b2434c116ed12ef8..43b0ec2d12ba6d4c1cfccbfd355af3e5d9ce1385 100644
> --- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> +++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> @@ -563,18 +563,16 @@ static const struct i2c_device_id max_tcpci_id[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, max_tcpci_id);
>
> -#ifdef CONFIG_OF
>  static const struct of_device_id max_tcpci_of_match[] = {
>         { .compatible = "maxim,max33359", },
>         {},
>  };
>  MODULE_DEVICE_TABLE(of, max_tcpci_of_match);
> -#endif
>
>  static struct i2c_driver max_tcpci_i2c_driver = {
>         .driver = {
>                 .name = "maxtcpc",
> -               .of_match_table = of_match_ptr(max_tcpci_of_match),
> +               .of_match_table = max_tcpci_of_match,
>                 .pm = &max_tcpci_pm_ops,
>         },
>         .probe = max_tcpci_probe,
>
> --
> 2.50.0.727.gbf7dc18ff4-goog
>

Re: [PATCH 3/3] usb: typec: tcpm/tcpci_maxim: enable PROBE_PREFER_ASYNCHRONOUS

[Badhri Jagan Sridharan]

On Mon, Jul 7, 2025 at 3:50 AM André Draszik <andre.draszik@linaro.org> wrote:
>
> This driver works fine with asynchronous probe.
>
> Signed-off-by: André Draszik <andre.draszik@linaro.org>

Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>

> ---
>  drivers/usb/typec/tcpm/tcpci_maxim_core.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> index 43b0ec2d12ba6d4c1cfccbfd355af3e5d9ce1385..19f63865079658fb2a446dc390262d141b940e9a 100644
> --- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> +++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> @@ -572,6 +572,7 @@ MODULE_DEVICE_TABLE(of, max_tcpci_of_match);
>  static struct i2c_driver max_tcpci_i2c_driver = {
>         .driver = {
>                 .name = "maxtcpc",
> +               .probe_type = PROBE_PREFER_ASYNCHRONOUS,
>                 .of_match_table = max_tcpci_of_match,
>                 .pm = &max_tcpci_pm_ops,
>         },
>
> --
> 2.50.0.727.gbf7dc18ff4-goog
>