From: "Jarkko Sakkinen" <jarkko@kernel.org>
To: "Stefan Berger" <stefanb@linux.ibm.com>,
<keyrings@vger.kernel.org>, <linux-crypto@vger.kernel.org>,
<herbert@gondor.apana.org.au>, <davem@davemloft.net>
Cc: <linux-kernel@vger.kernel.org>, <saulo.alessandre@tse.jus.br>,
<lukas@wunner.de>, <bbhushan2@marvell.com>
Subject: Re: [PATCH v7 06/13] crypto: ecc - Implement vli_mmod_fast_521 for NIST p521
Date: Thu, 21 Mar 2024 19:18:42 +0200 [thread overview]
Message-ID: <CZZLLJZZ65UD.1KGYIWJ2KJT1X@kernel.org> (raw)
In-Reply-To: <20240320114725.1644921-7-stefanb@linux.ibm.com>
On Wed Mar 20, 2024 at 1:47 PM EET, Stefan Berger wrote:
> Implement vli_mmod_fast_521 following the description for how to calculate
> the modulus for NIST P521 in the NIST publication "Recommendations for
> Discrete Logarithm-Based Cryptography: Elliptic Curve Domain Parameters"
> section G.1.4.
>
> NIST p521 requires 9 64bit digits, so increase the ECC_MAX_DIGITS so that
> the vli digit array provides enough elements to fit the larger integers
> required by this curve.
>
> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
> Tested-by: Lukas Wunner <lukas@wunner.de>
> ---
> crypto/ecc.c | 25 +++++++++++++++++++++++++
> include/crypto/internal/ecc.h | 3 ++-
> 2 files changed, 27 insertions(+), 1 deletion(-)
>
> diff --git a/crypto/ecc.c b/crypto/ecc.c
> index 415a2f4e7291..99d41887c005 100644
> --- a/crypto/ecc.c
> +++ b/crypto/ecc.c
> @@ -902,6 +902,28 @@ static void vli_mmod_fast_384(u64 *result, const u64 *product,
> #undef AND64H
> #undef AND64L
>
> +/*
> + * Computes result = product % curve_prime
> + * from "Recommendations for Discrete Logarithm-Based Cryptography:
> + * Elliptic Curve Domain Parameters" section G.1.4
> + */
> +static void vli_mmod_fast_521(u64 *result, const u64 *product,
> + const u64 *curve_prime, u64 *tmp)
> +{
> + const unsigned int ndigits = ECC_CURVE_NIST_P521_DIGITS;
> + size_t i;
> +
> + /* Initialize result with lowest 521 bits from product */
> + vli_set(result, product, ndigits);
> + result[8] &= 0x1ff;
> +
> + for (i = 0; i < ndigits; i++)
> + tmp[i] = (product[8 + i] >> 9) | (product[9 + i] << 55);
> + tmp[8] &= 0x1ff;
> +
> + vli_mod_add(result, result, tmp, curve_prime, ndigits);
> +}
> +
> /* Computes result = product % curve_prime for different curve_primes.
> *
> * Note that curve_primes are distinguished just by heuristic check and
> @@ -941,6 +963,9 @@ static bool vli_mmod_fast(u64 *result, u64 *product,
> case ECC_CURVE_NIST_P384_DIGITS:
> vli_mmod_fast_384(result, product, curve_prime, tmp);
> break;
> + case ECC_CURVE_NIST_P521_DIGITS:
> + vli_mmod_fast_521(result, product, curve_prime, tmp);
> + break;
> default:
> pr_err_ratelimited("ecc: unsupported digits size!\n");
> return false;
> diff --git a/include/crypto/internal/ecc.h b/include/crypto/internal/ecc.h
> index ab722a8986b7..4e2f5f938e91 100644
> --- a/include/crypto/internal/ecc.h
> +++ b/include/crypto/internal/ecc.h
> @@ -33,7 +33,8 @@
> #define ECC_CURVE_NIST_P192_DIGITS 3
> #define ECC_CURVE_NIST_P256_DIGITS 4
> #define ECC_CURVE_NIST_P384_DIGITS 6
> -#define ECC_MAX_DIGITS (512 / 64) /* due to ecrdsa */
> +#define ECC_CURVE_NIST_P521_DIGITS 9
> +#define ECC_MAX_DIGITS DIV_ROUND_UP(521, 64) /* NIST P521 */
>
> #define ECC_DIGITS_TO_BYTES_SHIFT 3
>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
BR, Jarkko
next prev parent reply other threads:[~2024-03-21 17:18 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-20 11:47 Add support for NIST P521 to ecdsa Stefan Berger
2024-03-20 11:47 ` [PATCH v7 01/13] crypto: ecc - Use ECC_CURVE_NIST_P192/256/384_DIGITS where possible Stefan Berger
2024-03-20 11:47 ` [PATCH v7 02/13] crypto: ecdsa - Convert byte arrays with key coordinates to digits Stefan Berger
2024-03-21 17:07 ` Jarkko Sakkinen
2024-03-20 11:47 ` [PATCH v7 03/13] crypto: ecdsa - Adjust tests on length of key parameters Stefan Berger
2024-03-21 17:11 ` Jarkko Sakkinen
2024-03-20 11:47 ` [PATCH v7 04/13] crypto: ecdsa - Extend res.x mod n calculation for NIST P521 Stefan Berger
2024-03-21 17:15 ` Jarkko Sakkinen
2024-03-20 11:47 ` [PATCH v7 05/13] crypto: ecc - Add nbits field to ecc_curve structure Stefan Berger
2024-03-21 17:17 ` Jarkko Sakkinen
2024-03-21 17:42 ` Stefan Berger
2024-03-21 18:24 ` Jarkko Sakkinen
2024-03-20 11:47 ` [PATCH v7 06/13] crypto: ecc - Implement vli_mmod_fast_521 for NIST p521 Stefan Berger
2024-03-21 17:18 ` Jarkko Sakkinen [this message]
2024-03-20 11:47 ` [PATCH v7 07/13] crypto: ecc - Add special case for NIST P521 in ecc_point_mult Stefan Berger
2024-03-20 11:47 ` [PATCH v7 08/13] crypto: ecc - Add NIST P521 curve parameters Stefan Berger
2024-03-20 11:47 ` [PATCH v7 09/13] crypto: ecdsa - Replace ndigits with nbits where precision is needed Stefan Berger
2024-03-21 17:19 ` Jarkko Sakkinen
2024-03-20 11:47 ` [PATCH v7 10/13] crypto: ecdsa - Rename keylen to bufsize where necessary Stefan Berger
2024-03-21 17:19 ` Jarkko Sakkinen
2024-03-20 11:47 ` [PATCH v7 11/13] crypto: ecdsa - Register NIST P521 and extend test suite Stefan Berger
2024-03-20 11:47 ` [PATCH v7 12/13] crypto: asymmetric_keys - Adjust signature size calculation for NIST P521 Stefan Berger
2024-03-21 17:20 ` Jarkko Sakkinen
2024-03-20 11:47 ` [PATCH v7 13/13] crypto: x509 - Add OID for NIST P521 and extend parser for it Stefan Berger
2024-03-21 17:20 ` Jarkko Sakkinen
2024-03-21 17:42 ` Stefan Berger
2024-03-21 18:25 ` Jarkko Sakkinen
2024-03-20 12:44 ` [PATCH v7 00/13] Add support for NIST P521 to ecdsa Stefan Berger
2024-03-25 19:18 ` Lukas Wunner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CZZLLJZZ65UD.1KGYIWJ2KJT1X@kernel.org \
--to=jarkko@kernel.org \
--cc=bbhushan2@marvell.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=keyrings@vger.kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=saulo.alessandre@tse.jus.br \
--cc=stefanb@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox