Re: [PATCH 1/3] tpm: Disable TCG_TPM2_HMAC by default

["Jarkko Sakkinen" <jarkko@kernel.org>]

On Mon May 27, 2024 at 5:51 PM EEST, Jarkko Sakkinen wrote:
> On Thu May 23, 2024 at 10:59 AM EEST, Vitor Soares wrote:
> > On Wed, 2024-05-22 at 19:11 +0300, Jarkko Sakkinen wrote:
> > > On Wed May 22, 2024 at 5:58 PM EEST, Vitor Soares wrote:
> > > > I did run with ftrace, but need some more time to go through it.
> > > > 
> > > > Here the step I did:
> > > > kernel config:
> > > >   CONFIG_FUNCTION_TRACER
> > > >   CONFIG_FUNCTION_GRAPH_TRACER
> > > > 
> > > > ftrace:
> > > >   # set filters
> > > >   echo tpm* > set_ftrace_filter
> > > > 
> > > >   # set tracer
> > > >   echo function_graph > current_tracer
> > > > 
> > > >   # take the sample
> > > >   echo 1 > tracing_on; time modprobe tpm_tis_spi; echo 0 > tracing_on
> > > > 
> > > > regards,
> > > > Vitor Soares
> > > 
> > > I'm now compiling distro kernel (OpenSUSE) for NUC7 with v6.10 contents.
> > > 
> > > After I have that setup, I'll develop a perf test either with perf or
> > > bpftrace. I'll come back with the possible CONFIG_* that should be in
> > > place in your kernel. Might take up until next week as I have some
> > > conference stuff to prepare but I try to have stuff ready early next
> > > week.
> > > 
> > > No need to rush with this as long as possible patches go to rc2 or rc3.
> > > Let's do a proper analysis instead.
> > > 
> > > In the meantime you could check if you get perf and/or bpftrace to 
> > > your image that use to boot up your device. Preferably both but
> > > please inform about this.
> > > 
> >
> > I already have perf running, for the bpftrace I might not be able to help.
>
> The interesting function to look at with/without hmac is probably
> tpm2_get_random().
>
> I attached a patch that removes hmac shenigans out of tpm2_get_random()
> for the sake of proper comparative testing.

Other thing that we need to measure is to split the cost into
two parts:

1. Handshake, i.e. setting up and shutdowning a session.
2. Transaction, payload TPM command.

This could be done by setting up couple of kprobes_events:

  payload_event: tpm2_get_random() etc.
  hmac_event: tpm2_start_auth_session(), tpm2_end_auth_session() etc.

And just summing up the time for a boot to get a cost for hmac.

I'd use bootconfig for this:

https://www.kernel.org/doc/html/v6.9/trace/boottime-trace.html

So I've made up plans how measure the incident but not sure when I
have time to pro-actively work on a benchmark (thus sharing details).

So I think with just proper bootconfig wtih no other tools uses this
can be measured.

BR, Jarkko