From: "Luca Weiss" <luca.weiss@fairphone.com>
To: "Jordan Crouse" <jorcrous@amazon.com>, <linux-media@vger.kernel.org>
Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Robert Foss" <rfoss@kernel.org>,
"Todor Tomov" <todor.too@gmail.com>,
<linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v1 1/2] media: camss: Increase the maximum frame size
Date: Fri, 06 Dec 2024 15:51:33 +0100 [thread overview]
Message-ID: <D64PAIXELZ6A.37ZSFBIRPE6MT@fairphone.com> (raw)
In-Reply-To: <20240802152435.35796-2-jorcrous@amazon.com>
On Fri Aug 2, 2024 at 5:24 PM CEST, Jordan Crouse wrote:
> Commit 35493d653a2d
> ("media: camss: add support for vidioc_enum_framesizes ioctl") added a
> maximum frame width and height but the values selected seemed to have
> been arbitrary. In reality the cam hardware doesn't seem to have a maximum
> size restriction so double up the maximum reported width and height to
> allow for larger frames.
>
> Also increase the maximum size checks at each point in the pipeline so
> the increased sizes are allowed all the way down to the sensor.
Hi Jordan,
Looks like this hasn't landed yet, do you plan on resending this?
Just wanted to try a 8192x6144 format but csid limiting the size to 8191
is a bit in the way.
Regards
Luca
>
> Signed-off-by: Jordan Crouse <jorcrous@amazon.com>
> ---
>
> drivers/media/platform/qcom/camss/camss-csid.c | 8 ++++----
> drivers/media/platform/qcom/camss/camss-csiphy.c | 4 ++--
> drivers/media/platform/qcom/camss/camss-ispif.c | 4 ++--
> drivers/media/platform/qcom/camss/camss-vfe.c | 4 ++--
> drivers/media/platform/qcom/camss/camss-video.c | 6 +++---
> 5 files changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
> index 858db5d4ca75..886c42c82612 100644
> --- a/drivers/media/platform/qcom/camss/camss-csid.c
> +++ b/drivers/media/platform/qcom/camss/camss-csid.c
> @@ -752,8 +752,8 @@ static void csid_try_format(struct csid_device *csid,
> if (i >= csid->res->formats->nformats)
> fmt->code = MEDIA_BUS_FMT_UYVY8_1X16;
>
> - fmt->width = clamp_t(u32, fmt->width, 1, 8191);
> - fmt->height = clamp_t(u32, fmt->height, 1, 8191);
> + fmt->width = clamp_t(u32, fmt->width, 1, 16383);
> + fmt->height = clamp_t(u32, fmt->height, 1, 16383);
>
> fmt->field = V4L2_FIELD_NONE;
> fmt->colorspace = V4L2_COLORSPACE_SRGB;
> @@ -781,8 +781,8 @@ static void csid_try_format(struct csid_device *csid,
> if (i >= csid->res->formats->nformats)
> fmt->code = MEDIA_BUS_FMT_UYVY8_1X16;
>
> - fmt->width = clamp_t(u32, fmt->width, 1, 8191);
> - fmt->height = clamp_t(u32, fmt->height, 1, 8191);
> + fmt->width = clamp_t(u32, fmt->width, 1, 16383);
> + fmt->height = clamp_t(u32, fmt->height, 1, 16383);
>
> fmt->field = V4L2_FIELD_NONE;
> }
> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
> index 2f7361dfd461..43c35ad6ac84 100644
> --- a/drivers/media/platform/qcom/camss/camss-csiphy.c
> +++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
> @@ -368,8 +368,8 @@ static void csiphy_try_format(struct csiphy_device *csiphy,
> if (i >= csiphy->res->formats->nformats)
> fmt->code = MEDIA_BUS_FMT_UYVY8_1X16;
>
> - fmt->width = clamp_t(u32, fmt->width, 1, 8191);
> - fmt->height = clamp_t(u32, fmt->height, 1, 8191);
> + fmt->width = clamp_t(u32, fmt->width, 1, 16383);
> + fmt->height = clamp_t(u32, fmt->height, 1, 16383);
>
> fmt->field = V4L2_FIELD_NONE;
> fmt->colorspace = V4L2_COLORSPACE_SRGB;
> diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
> index a12dcc7ff438..01e2ded8da0b 100644
> --- a/drivers/media/platform/qcom/camss/camss-ispif.c
> +++ b/drivers/media/platform/qcom/camss/camss-ispif.c
> @@ -912,8 +912,8 @@ static void ispif_try_format(struct ispif_line *line,
> if (i >= line->nformats)
> fmt->code = MEDIA_BUS_FMT_UYVY8_1X16;
>
> - fmt->width = clamp_t(u32, fmt->width, 1, 8191);
> - fmt->height = clamp_t(u32, fmt->height, 1, 8191);
> + fmt->width = clamp_t(u32, fmt->width, 1, 16383);
> + fmt->height = clamp_t(u32, fmt->height, 1, 16383);
>
> fmt->field = V4L2_FIELD_NONE;
> fmt->colorspace = V4L2_COLORSPACE_SRGB;
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
> index 83c5a36d071f..826c0fb31785 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe.c
> @@ -1049,8 +1049,8 @@ static void vfe_try_format(struct vfe_line *line,
> if (i >= line->nformats)
> fmt->code = MEDIA_BUS_FMT_UYVY8_1X16;
>
> - fmt->width = clamp_t(u32, fmt->width, 1, 8191);
> - fmt->height = clamp_t(u32, fmt->height, 1, 8191);
> + fmt->width = clamp_t(u32, fmt->width, 1, 16383);
> + fmt->height = clamp_t(u32, fmt->height, 1, 16383);
>
> fmt->field = V4L2_FIELD_NONE;
> fmt->colorspace = V4L2_COLORSPACE_SRGB;
> diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
> index cd72feca618c..5fee3733da8e 100644
> --- a/drivers/media/platform/qcom/camss/camss-video.c
> +++ b/drivers/media/platform/qcom/camss/camss-video.c
> @@ -19,10 +19,10 @@
> #include "camss.h"
>
> #define CAMSS_FRAME_MIN_WIDTH 1
> -#define CAMSS_FRAME_MAX_WIDTH 8191
> +#define CAMSS_FRAME_MAX_WIDTH 16833
> #define CAMSS_FRAME_MIN_HEIGHT 1
> -#define CAMSS_FRAME_MAX_HEIGHT_RDI 8191
> -#define CAMSS_FRAME_MAX_HEIGHT_PIX 4096
> +#define CAMSS_FRAME_MAX_HEIGHT_RDI 16833
> +#define CAMSS_FRAME_MAX_HEIGHT_PIX 8192
>
> /* -----------------------------------------------------------------------------
> * Helper functions
next prev parent reply other threads:[~2024-12-06 14:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-02 15:24 [PATCH v1 0/2] media: camss: Fixups for large capture frames Jordan Crouse
2024-08-02 15:24 ` [PATCH v1 1/2] media: camss: Increase the maximum frame size Jordan Crouse
2024-08-06 23:09 ` Bryan O'Donoghue
2024-08-07 8:16 ` Bryan O'Donoghue
2024-12-06 14:51 ` Luca Weiss [this message]
2025-04-07 15:59 ` Bryan O'Donoghue
2024-08-02 15:24 ` [PATCH v1 2/2] media: camss: Avoid overwriting vfe clock rates for 8250 Jordan Crouse
2024-08-02 22:20 ` Bryan O'Donoghue
2024-08-06 22:38 ` Jordan Crouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=D64PAIXELZ6A.37ZSFBIRPE6MT@fairphone.com \
--to=luca.weiss@fairphone.com \
--cc=bryan.odonoghue@linaro.org \
--cc=jorcrous@amazon.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rfoss@kernel.org \
--cc=todor.too@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox