From: "Yeounsu Moon" <yyyynoom@gmail.com>
To: "Eric Dumazet" <edumazet@google.com>
Cc: "Andrew Lunn" <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH net] net: natsemi: fix `rx_dropped` double accounting on `netif_rx()` failure
Date: Sat, 13 Sep 2025 00:50:37 +0900 [thread overview]
Message-ID: <DCQXWATX22EF.1AWF6AGWZ639S@gmail.com> (raw)
In-Reply-To: <CANn89iLUTs4oKK30g8AjYhreM2Krwt5sAwzsO=xU--G7myt6WQ@mail.gmail.com>
On Fri Sep 12, 2025 at 11:19 PM KST, Eric Dumazet wrote:
>
> I do not think this Fixes: is correct.
>
> I think core networking got this accounting in netif_rx() in 2010
>
> commit caf586e5f23c (" net: add a core netdev->rx_dropped counter")
>
I hadn't considered that the Fixes: tag can refer to code outside of the
changes being made. Thank you for pointing this out. I also noticed your
earlier work from 2010.
I'll update the Fixes: tag as you suggested.
>> Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
>> ---
>> drivers/net/ethernet/natsemi/ns83820.c | 13 ++++++-------
>> 1 file changed, 6 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c
>> index 56d5464222d9..cdbf82affa7b 100644
>> --- a/drivers/net/ethernet/natsemi/ns83820.c
>> +++ b/drivers/net/ethernet/natsemi/ns83820.c
>> @@ -820,7 +820,7 @@ static void rx_irq(struct net_device *ndev)
>> struct ns83820 *dev = PRIV(ndev);
>> struct rx_info *info = &dev->rx_info;
>> unsigned next_rx;
>> - int rx_rc, len;
>> + int len;
>> u32 cmdsts;
>> __le32 *desc;
>> unsigned long flags;
>> @@ -881,8 +881,10 @@ static void rx_irq(struct net_device *ndev)
>> if (likely(CMDSTS_OK & cmdsts)) {
>> #endif
>> skb_put(skb, len);
>> - if (unlikely(!skb))
>
> I doubt this driver is used.
>
I also honestly doubt that this driver is still in use.
I came across it while analyzing the `netif_rx()` and `rx_dropped` code
paths, and I noticed that there are quite a few unmanaged drivers using
this kind of code. So I started to fix that.
But If patches like this only burden busy maintainers and reviewers,
I'll stop sending them. That said, I do think leaving unmanaged drivers
as they are is also problematic.
As a newcomer sending patches to netdev, I realized that there are quite
a few such drivers. I don't necessarily believe they all must be actively
maintained, but it feels like some action is needed.
> Notice that this test about skb being NULL or not happens after
> skb_put(skb, len)
> which would have crashed anyway if skb was NULL.
>
I think I wrote the commit message incorrectly.
The main point was not about `skb_put()`, but rather about the `if`
statement that checks `skb`.
That said, after your comment I realized that `skb_put()` itself also
looks problematic.
Thank you for the detailed review!
Yeounsu Moon
prev parent reply other threads:[~2025-09-12 15:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-11 5:33 [PATCH net] net: natsemi: fix `rx_dropped` double accounting on `netif_rx()` failure Yeounsu Moon
2025-09-12 13:21 ` Simon Horman
2025-09-12 14:01 ` Yeounsu Moon
2025-09-12 14:19 ` Eric Dumazet
2025-09-12 15:50 ` Yeounsu Moon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DCQXWATX22EF.1AWF6AGWZ639S@gmail.com \
--to=yyyynoom@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox