[PATCH 7/7] arm64: dts: qcom: sdm660-xiaomi-lavender: Add USB

Dang Huynh
2021-11-07T20:05:32Z

Enable and configure DWC3 and QUSB2 PHY to enable USB
functionality on the Redmi Note 7.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
.../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index d6599881f1ac..b54191f1f152 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -84,6 +84,15 @@ cont_splash_mem: cont-splash-region@9d400000 {
no-map;
};
};
+
+ /*
+ * Until we hook up type-c detection, we
+ * have to stick with this. But it works.
+ */
+ extcon_usb: extcon-usb {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ };
};

&blsp1_uart2 {
@@ -100,6 +109,13 @@ voldown {
};
};

+&qusb2phy {
+ status = "okay";
+
+ vdd-supply = <&vreg_l1b_0p925>;
+ vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
&rpm_requests {
pm660l-regulators {
compatible = "qcom,rpm-pm660l-regulators";
@@ -405,3 +421,12 @@ &sdhc_2 {
&tlmm {
gpio-reserved-ranges = <8 4>;
};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "peripheral";
+ extcon = <&extcon_usb>;
+};
--
2.33.1