[PATCH v9 00/15] Apply drm_bridge_connector and panel_bridge helper for the Analogix DP driver

[PATCH v9 00/15] Apply drm_bridge_connector and panel_bridge helper for the Analogix DP driver

[Damon Ding]

Picked from:
https://lore.kernel.org/all/20251217093321.3108939-1-damon.ding@rock-chips.com/

PATCH 1 is to add a new parameter to store the point of next bridge.
PATCH 2 is to make legacy bridge driver more universal.
PATCH 3-8 are preparations for apply drm_bridge_connector helper.
PATCH 9 is to apply the drm_bridge_connector helper.
PATCH 10-12 are to move the panel/bridge parsing to the Analogix side.
PATCH 13 is to attach the next bridge on Analogix side uniformly.
PATCH 14-15 are to apply the panel_bridge helper.

The following reviewed commits, which to make codes more concise, are
rebased to the front of this patch series:

https://lore.kernel.org/all/20251110085823.1197472-1-damon.ding@rock-chips.com/
https://lore.kernel.org/all/20251111022103.1350183-1-damon.ding@rock-chips.com/

Damon Ding (15):
  drm/bridge: analogix_dp: Add &analogix_dp_plat_data.next_bridge
  drm/bridge: Move legacy bridge driver out of imx directory for
    multi-platform use
  drm/exynos: exynos_dp: Remove &exynos_dp_device.ptn_bridge
  drm/exynos: exynos_dp: Remove unused &exynos_dp_device.connector
  drm/exynos: exynos_dp: Apply of-display-mode-bridge to parse the
    display-timings node
  drm/bridge: analogix_dp: Remove redundant
    &analogix_dp_plat_data.skip_connector
  drm/bridge: analogix_dp: Move the color format check to
    .atomic_check() for Rockchip platforms
  drm/bridge: analogix_dp: Remove unused
    &analogix_dp_plat_data.get_modes()
  drm/bridge: analogix_dp: Apply drm_bridge_connector helper
  drm/bridge: analogix_dp: Add new API analogix_dp_finish_probe()
  drm/rockchip: analogix_dp: Apply analogix_dp_finish_probe()
  drm/exynos: exynos_dp: Apply analogix_dp_finish_probe()
  drm/bridge: analogix_dp: Attach the next bridge in
    analogix_dp_bridge_attach()
  drm/bridge: analogix_dp: Remove bridge disabing and panel unpreparing
    in analogix_dp_unbind()
  drm/bridge: analogix_dp: Apply panel_bridge helper

 drivers/gpu/drm/bridge/Kconfig                |  10 +
 drivers/gpu/drm/bridge/Makefile               |   1 +
 drivers/gpu/drm/bridge/analogix/Kconfig       |   1 +
 .../drm/bridge/analogix/analogix_dp_core.c    | 238 +++++++++---------
 .../drm/bridge/analogix/analogix_dp_core.h    |   1 -
 drivers/gpu/drm/bridge/imx/Kconfig            |  10 -
 drivers/gpu/drm/bridge/imx/Makefile           |   1 -
 .../gpu/drm/bridge/imx/imx-legacy-bridge.c    |  91 -------
 .../gpu/drm/bridge/of-display-mode-bridge.c   |  93 +++++++
 drivers/gpu/drm/exynos/Kconfig                |   2 +
 drivers/gpu/drm/exynos/exynos_dp.c            | 110 ++------
 drivers/gpu/drm/imx/ipuv3/Kconfig             |   4 +-
 drivers/gpu/drm/imx/ipuv3/imx-ldb.c           |   6 +-
 drivers/gpu/drm/imx/ipuv3/parallel-display.c  |   5 +-
 drivers/gpu/drm/rockchip/Kconfig              |   1 +
 .../gpu/drm/rockchip/analogix_dp-rockchip.c   |  67 +----
 include/drm/bridge/analogix_dp.h              |   8 +-
 include/drm/bridge/imx.h                      |  17 --
 include/drm/bridge/of-display-mode-bridge.h   |  17 ++
 19 files changed, 297 insertions(+), 386 deletions(-)
 delete mode 100644 drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c
 create mode 100644 drivers/gpu/drm/bridge/of-display-mode-bridge.c
 delete mode 100644 include/drm/bridge/imx.h
 create mode 100644 include/drm/bridge/of-display-mode-bridge.h

---

Changes in v2:
- Update Exynos DP driver synchronously.
- Move the panel/bridge parsing to the Analogix side.

Changes in v3:
- Rebase for the existing devm_drm_bridge_alloc() applying commit.
- Fix the typographical error of panel/bridge check in exynos_dp_bind().
- Squash all commits related to skip_connector deletion in both Exynos and
  Analogix code into one.
- Apply panel_bridge helper to make the codes more concise.
- Fix the handing of bridge in analogix_dp_bridge_get_modes().
- Remove unnecessary parameter struct drm_connector* for callback
  &analogix_dp_plat_data.attach().
- In order to decouple the connector driver and the bridge driver, move
  the bridge connector initilization to the Rockchip and Exynos sides.

Changes in v4:
- Rebase for the applied &drm_bridge_funcs.detect() modification commit.
- Rename analogix_dp_find_panel_or_bridge() to analogix_dp_finish_probe().
- Drop the drmm_encoder_init() modification commit.
- Rename the &analogix_dp_plat_data.bridge to
  &analogix_dp_plat_data.next_bridge.

Changes in v5:
- Add legacy bridge to parse the display-timings node under the dp node
  for Exynos side.
- Move color format check to &drm_connector_helper_funcs.atomic_check()
  in order to get rid of &analogix_dp_plat_data.get_modes().
- Remove unused callback &analogix_dp_plat_data.get_modes().
- Distinguish the &drm_bridge->ops of Analogix bridge based on whether
  the downstream device is a panel, a bridge or neither.
- Select DRM_DISPLAY_DP_AUX_BUS for DRM_ANALOGIX_DP, and remove it for
  ROCKCHIP_ANALOGIX_DP.
- Apply rockchip_dp_attach() to support the next bridge attachment for
  the Rockchip side.
- Move next_bridge attachment from Analogix side to Rockchip/Exynos sides.

Changes in v6:
- Move legacy bridge driver out of imx directory for multi-platform use.
- Apply DRM legacy bridge to parse display timings intead of implementing
  the same codes only for Exynos DP.
- Ensure last bridge determines EDID/modes detection capabilities in DRM
  bridge_connector driver.
- Remove unnecessary drm_bridge_get_modes() in
  analogix_dp_bridge_get_modes().
- Simplify analogix_dp_bridge_edid_read().
- If the next is a bridge, set DRM_BRIDGE_OP_DETECT and return
  connector_status_connected in analogix_dp_bridge_detect().
- Set flag DRM_BRIDGE_ATTACH_NO_CONNECTOR for bridge attachment while
  binding. Meanwhile, make DRM_BRIDGE_ATTACH_NO_CONNECTOR unsuppported
  in analogix_dp_bridge_attach().
- Move the next bridge attachment to the Analogix side rather than
  scattered on Rockchip and Exynos sides.
- Remove the unnecessary analogix_dp_bridge_get_modes().
- Squash [PATCH v5 15/17] into [PATCH v5 17/17].
- Fix the &drm_bridge->ops to DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT.

Changes in v7:
- As Luca suggested, simplify the code and related comment for bridge_connector
  modifications. Additionally, move the commit related to bridge_connector to
  the top of this patch series.
- Rename legacy-bridge driver to of-display-mode-bridge driver.
- Remove unnecessary API drm_bridge_is_legacy() and apply a temporary flag
  &exynos_dp_device.has_of_bridge instead, which will be removed finally.
- Remove exynos_dp_legacy_bridge_init() and inline API
  devm_drm_of_display_mode_bridge().

Changes in v8:
- Adapt the related modifications to the newest bridge_connector driver.

Changes in v9:
- Fix the Kconfig help text for CONFIG_DRM_OF_DISPLAY_MODE_BRIDGE.
- Add Tested-by tag from Heiko.

-- 
2.34.1

[PATCH v9 01/15] drm/bridge: analogix_dp: Add &analogix_dp_plat_data.next_bridge

[Damon Ding]

In order to move the panel/bridge parsing and attachmenet to the
Analogix side, add component struct drm_bridge *next_bridge to
platform data struct analogix_dp_plat_data.

The movement makes sense because the panel/bridge should logically
be positioned behind the Analogix bridge in the display pipeline.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

---

Changes in v4:
- Rename the &analogix_dp_plat_data.bridge to
  &analogix_dp_plat_data.next_bridge

Changes in v9:
- Add Reviewed-by and Tested-by tags.
---
 include/drm/bridge/analogix_dp.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index cf17646c1310..582357c20640 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -27,6 +27,7 @@ static inline bool is_rockchip(enum analogix_dp_devtype type)
 struct analogix_dp_plat_data {
 	enum analogix_dp_devtype dev_type;
 	struct drm_panel *panel;
+	struct drm_bridge *next_bridge;
 	struct drm_encoder *encoder;
 	struct drm_connector *connector;
 	bool skip_connector;
-- 
2.34.1

[PATCH v9 02/15] drm/bridge: Move legacy bridge driver out of imx directory for multi-platform use

[Damon Ding]

As suggested by Dmitry, the DRM legacy bridge driver can be pulled
out of imx/ subdir for multi-platform use. The driver is also renamed
to make it more generic and suitable for platforms other than i.MX.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

---

Changes in v7:
- Rename legacy-bridge to of-display-mode-bridge.
- Remove unnecessary API drm_bridge_is_legacy().

Changes in v9
- Fix the Kconfig help text.
- Add Tested-by tag.
---
 drivers/gpu/drm/bridge/Kconfig                | 10 ++
 drivers/gpu/drm/bridge/Makefile               |  1 +
 drivers/gpu/drm/bridge/imx/Kconfig            | 10 --
 drivers/gpu/drm/bridge/imx/Makefile           |  1 -
 .../gpu/drm/bridge/imx/imx-legacy-bridge.c    | 91 ------------------
 .../gpu/drm/bridge/of-display-mode-bridge.c   | 93 +++++++++++++++++++
 drivers/gpu/drm/imx/ipuv3/Kconfig             |  4 +-
 drivers/gpu/drm/imx/ipuv3/imx-ldb.c           |  6 +-
 drivers/gpu/drm/imx/ipuv3/parallel-display.c  |  5 +-
 include/drm/bridge/imx.h                      | 17 ----
 include/drm/bridge/of-display-mode-bridge.h   | 17 ++++
 11 files changed, 129 insertions(+), 126 deletions(-)
 delete mode 100644 drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c
 create mode 100644 drivers/gpu/drm/bridge/of-display-mode-bridge.c
 delete mode 100644 include/drm/bridge/imx.h
 create mode 100644 include/drm/bridge/of-display-mode-bridge.h

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 39385deafc68..6563d367cad8 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -251,6 +251,16 @@ config DRM_NXP_PTN3460
 	help
 	  NXP PTN3460 eDP-LVDS bridge chip driver.
 
+config DRM_OF_DISPLAY_MODE_BRIDGE
+	tristate
+	depends on DRM_BRIDGE && OF
+	help
+	  This is a DRM bridge implementation that uses of_get_drm_display_mode
+	  to acquire display mode.
+
+	  It exists for compatibility with legacy display mode parsing, in order
+	  to conform to the panel-bridge framework.
+
 config DRM_PARADE_PS8622
 	tristate "Parade eDP/LVDS bridge"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 909c21cc3acd..c54018a014d3 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
 obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
 obj-$(CONFIG_DRM_MICROCHIP_LVDS_SERIALIZER) += microchip-lvds.o
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
+obj-$(CONFIG_DRM_OF_DISPLAY_MODE_BRIDGE) += of-display-mode-bridge.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
 obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
 obj-$(CONFIG_DRM_SAMSUNG_DSIM) += samsung-dsim.o
diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
index b9028a5e5a06..8877b9789868 100644
--- a/drivers/gpu/drm/bridge/imx/Kconfig
+++ b/drivers/gpu/drm/bridge/imx/Kconfig
@@ -3,16 +3,6 @@ if ARCH_MXC || COMPILE_TEST
 config DRM_IMX_LDB_HELPER
 	tristate
 
-config DRM_IMX_LEGACY_BRIDGE
-	tristate
-	depends on DRM_IMX
-	help
-	  This is a DRM bridge implementation for the DRM i.MX IPUv3 driver,
-	  that uses of_get_drm_display_mode to acquire display mode.
-
-	  Newer designs should not use this bridge and should use proper panel
-	  driver instead.
-
 config DRM_IMX8MP_DW_HDMI_BRIDGE
 	tristate "Freescale i.MX8MP HDMI-TX bridge support"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/imx/Makefile b/drivers/gpu/drm/bridge/imx/Makefile
index 8d01fda25451..69d9f9abbe36 100644
--- a/drivers/gpu/drm/bridge/imx/Makefile
+++ b/drivers/gpu/drm/bridge/imx/Makefile
@@ -1,5 +1,4 @@
 obj-$(CONFIG_DRM_IMX_LDB_HELPER) += imx-ldb-helper.o
-obj-$(CONFIG_DRM_IMX_LEGACY_BRIDGE) += imx-legacy-bridge.o
 obj-$(CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE) += imx8mp-hdmi-tx.o
 obj-$(CONFIG_DRM_IMX8MP_HDMI_PAI) += imx8mp-hdmi-pai.o
 obj-$(CONFIG_DRM_IMX8MP_HDMI_PVI) += imx8mp-hdmi-pvi.o
diff --git a/drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c b/drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c
deleted file mode 100644
index 0e31d5000e7c..000000000000
--- a/drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Freescale i.MX drm driver
- *
- * bridge driver for legacy DT bindings, utilizing display-timings node
- */
-
-#include <linux/export.h>
-
-#include <drm/drm_bridge.h>
-#include <drm/drm_modes.h>
-#include <drm/drm_probe_helper.h>
-#include <drm/bridge/imx.h>
-
-#include <video/of_display_timing.h>
-#include <video/of_videomode.h>
-
-struct imx_legacy_bridge {
-	struct drm_bridge base;
-
-	struct drm_display_mode mode;
-	u32 bus_flags;
-};
-
-#define to_imx_legacy_bridge(bridge)	container_of(bridge, struct imx_legacy_bridge, base)
-
-static int imx_legacy_bridge_attach(struct drm_bridge *bridge,
-				    struct drm_encoder *encoder,
-				    enum drm_bridge_attach_flags flags)
-{
-	if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
-		return -EINVAL;
-
-	return 0;
-}
-
-static int imx_legacy_bridge_get_modes(struct drm_bridge *bridge,
-				       struct drm_connector *connector)
-{
-	struct imx_legacy_bridge *imx_bridge = to_imx_legacy_bridge(bridge);
-	int ret;
-
-	ret = drm_connector_helper_get_modes_fixed(connector, &imx_bridge->mode);
-	if (ret)
-		return ret;
-
-	connector->display_info.bus_flags = imx_bridge->bus_flags;
-
-	return 0;
-}
-
-struct drm_bridge_funcs imx_legacy_bridge_funcs = {
-	.attach = imx_legacy_bridge_attach,
-	.get_modes = imx_legacy_bridge_get_modes,
-};
-
-struct drm_bridge *devm_imx_drm_legacy_bridge(struct device *dev,
-					      struct device_node *np,
-					      int type)
-{
-	struct imx_legacy_bridge *imx_bridge;
-	int ret;
-
-	imx_bridge = devm_drm_bridge_alloc(dev, struct imx_legacy_bridge,
-					   base, &imx_legacy_bridge_funcs);
-	if (IS_ERR(imx_bridge))
-		return ERR_CAST(imx_bridge);
-
-	ret = of_get_drm_display_mode(np,
-				      &imx_bridge->mode,
-				      &imx_bridge->bus_flags,
-				      OF_USE_NATIVE_MODE);
-	if (ret)
-		return ERR_PTR(ret);
-
-	imx_bridge->mode.type |= DRM_MODE_TYPE_DRIVER;
-
-	imx_bridge->base.of_node = np;
-	imx_bridge->base.ops = DRM_BRIDGE_OP_MODES;
-	imx_bridge->base.type = type;
-
-	ret = devm_drm_bridge_add(dev, &imx_bridge->base);
-	if (ret)
-		return ERR_PTR(ret);
-
-	return &imx_bridge->base;
-}
-EXPORT_SYMBOL_GPL(devm_imx_drm_legacy_bridge);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Freescale i.MX DRM bridge driver for legacy DT bindings");
diff --git a/drivers/gpu/drm/bridge/of-display-mode-bridge.c b/drivers/gpu/drm/bridge/of-display-mode-bridge.c
new file mode 100644
index 000000000000..cb15713f3a79
--- /dev/null
+++ b/drivers/gpu/drm/bridge/of-display-mode-bridge.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Sascha Hauer, Pengutronix
+ *
+ * bridge driver for legacy DT bindings, utilizing display-timings node
+ *
+ * Author: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
+ */
+
+#include <linux/export.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/bridge/of-display-mode-bridge.h>
+
+#include <video/of_display_timing.h>
+#include <video/of_videomode.h>
+
+struct of_display_mode_bridge {
+	struct drm_bridge base;
+
+	struct drm_display_mode mode;
+	u32 bus_flags;
+};
+
+#define to_of_display_mode_bridge(bridge) container_of(bridge, struct of_display_mode_bridge, base)
+
+static int of_display_mode_bridge_attach(struct drm_bridge *bridge,
+					 struct drm_encoder *encoder,
+					 enum drm_bridge_attach_flags flags)
+{
+	if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int of_display_mode_bridge_get_modes(struct drm_bridge *bridge,
+					    struct drm_connector *connector)
+{
+	struct of_display_mode_bridge *of_bridge = to_of_display_mode_bridge(bridge);
+	int ret;
+
+	ret = drm_connector_helper_get_modes_fixed(connector, &of_bridge->mode);
+	if (ret)
+		return ret;
+
+	connector->display_info.bus_flags = of_bridge->bus_flags;
+
+	return 0;
+}
+
+struct drm_bridge_funcs of_display_mode_bridge_funcs = {
+	.attach = of_display_mode_bridge_attach,
+	.get_modes = of_display_mode_bridge_get_modes,
+};
+
+struct drm_bridge *devm_drm_of_display_mode_bridge(struct device *dev,
+						   struct device_node *np,
+						   int type)
+{
+	struct of_display_mode_bridge *of_bridge;
+	int ret;
+
+	of_bridge = devm_drm_bridge_alloc(dev, struct of_display_mode_bridge,
+					  base, &of_display_mode_bridge_funcs);
+	if (IS_ERR(of_bridge))
+		return ERR_CAST(of_bridge);
+
+	ret = of_get_drm_display_mode(np,
+				      &of_bridge->mode,
+				      &of_bridge->bus_flags,
+				      OF_USE_NATIVE_MODE);
+	if (ret)
+		return ERR_PTR(ret);
+
+	of_bridge->mode.type |= DRM_MODE_TYPE_DRIVER;
+
+	of_bridge->base.of_node = np;
+	of_bridge->base.ops = DRM_BRIDGE_OP_MODES;
+	of_bridge->base.type = type;
+
+	ret = devm_drm_bridge_add(dev, &of_bridge->base);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &of_bridge->base;
+}
+EXPORT_SYMBOL_GPL(devm_drm_of_display_mode_bridge);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DRM bridge driver for legacy DT bindings");
diff --git a/drivers/gpu/drm/imx/ipuv3/Kconfig b/drivers/gpu/drm/imx/ipuv3/Kconfig
index acaf25089001..e98f8d35efaa 100644
--- a/drivers/gpu/drm/imx/ipuv3/Kconfig
+++ b/drivers/gpu/drm/imx/ipuv3/Kconfig
@@ -15,7 +15,7 @@ config DRM_IMX_PARALLEL_DISPLAY
 	depends on DRM_IMX
 	select DRM_BRIDGE
 	select DRM_BRIDGE_CONNECTOR
-	select DRM_IMX_LEGACY_BRIDGE
+	select DRM_OF_DISPLAY_MODE_BRIDGE
 	select DRM_PANEL_BRIDGE
 	select VIDEOMODE_HELPERS
 
@@ -36,7 +36,7 @@ config DRM_IMX_LDB
 	select DRM_BRIDGE
 	select DRM_BRIDGE_CONNECTOR
 	select DRM_PANEL_BRIDGE
-	select DRM_IMX_LEGACY_BRIDGE
+	select DRM_OF_DISPLAY_MODE_BRIDGE
 	help
 	  Choose this to enable the internal LVDS Display Bridge (LDB)
 	  found on i.MX53 and i.MX6 processors.
diff --git a/drivers/gpu/drm/imx/ipuv3/imx-ldb.c b/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
index 626d410d9150..730caf883e83 100644
--- a/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
+++ b/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
@@ -28,7 +28,7 @@
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_simple_kms_helper.h>
-#include <drm/bridge/imx.h>
+#include <drm/bridge/of-display-mode-bridge.h>
 
 #include "imx-drm.h"
 
@@ -605,8 +605,8 @@ static int imx_ldb_probe(struct platform_device *pdev)
 		 * checking the bus_format property.
 		 */
 		if (!channel->bridge) {
-			channel->bridge = devm_imx_drm_legacy_bridge(dev, child,
-								     DRM_MODE_CONNECTOR_LVDS);
+			channel->bridge = devm_drm_of_display_mode_bridge(dev, child,
+									  DRM_MODE_CONNECTOR_LVDS);
 			if (IS_ERR(channel->bridge)) {
 				ret = PTR_ERR(channel->bridge);
 				goto free_child;
diff --git a/drivers/gpu/drm/imx/ipuv3/parallel-display.c b/drivers/gpu/drm/imx/ipuv3/parallel-display.c
index 6fbf505d2801..1109cb1badcb 100644
--- a/drivers/gpu/drm/imx/ipuv3/parallel-display.c
+++ b/drivers/gpu/drm/imx/ipuv3/parallel-display.c
@@ -19,7 +19,7 @@
 #include <drm/drm_of.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_simple_kms_helper.h>
-#include <drm/bridge/imx.h>
+#include <drm/bridge/of-display-mode-bridge.h>
 
 #include "imx-drm.h"
 
@@ -233,7 +233,8 @@ static int imx_pd_probe(struct platform_device *pdev)
 	/* port@1 is the output port */
 	imxpd->next_bridge = devm_drm_of_get_bridge(dev, np, 1, 0);
 	if (imxpd->next_bridge == ERR_PTR(-ENODEV))
-		imxpd->next_bridge = devm_imx_drm_legacy_bridge(dev, np, DRM_MODE_CONNECTOR_DPI);
+		imxpd->next_bridge = devm_drm_of_display_mode_bridge(dev, np,
+								     DRM_MODE_CONNECTOR_DPI);
 	if (IS_ERR(imxpd->next_bridge)) {
 		ret = PTR_ERR(imxpd->next_bridge);
 		return ret;
diff --git a/include/drm/bridge/imx.h b/include/drm/bridge/imx.h
deleted file mode 100644
index b93f719fe0e7..000000000000
--- a/include/drm/bridge/imx.h
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Sascha Hauer, Pengutronix
- */
-
-#ifndef DRM_IMX_BRIDGE_H
-#define DRM_IMX_BRIDGE_H
-
-struct device;
-struct device_node;
-struct drm_bridge;
-
-struct drm_bridge *devm_imx_drm_legacy_bridge(struct device *dev,
-					      struct device_node *np,
-					      int type);
-
-#endif
diff --git a/include/drm/bridge/of-display-mode-bridge.h b/include/drm/bridge/of-display-mode-bridge.h
new file mode 100644
index 000000000000..89fcfedf68d8
--- /dev/null
+++ b/include/drm/bridge/of-display-mode-bridge.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Sascha Hauer, Pengutronix
+ */
+
+#ifndef DRM_OF_DISPLAY_MODE_BRIDGE_H
+#define DRM_OF_DISPLAY_MODE_BRIDGE_H
+
+struct device;
+struct device_node;
+struct drm_bridge;
+
+struct drm_bridge *devm_drm_of_display_mode_bridge(struct device *dev,
+						   struct device_node *np,
+						   int type);
+
+#endif
-- 
2.34.1

[PATCH v9 03/15] drm/exynos: exynos_dp: Remove &exynos_dp_device.ptn_bridge

[Damon Ding]

Use &analogix_dp_plat_data.bridge instead of &exynos_dp_device.ptn_bridge
directly.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

------

Changes in v3:
- Fix the typographical error for &dp->plat_data.bridge.

Changes in v4:
- Rename the &analogix_dp_plat_data.bridge to
  &analogix_dp_plat_data.next_bridge.

Changes in v9:
- Add Reviewed-by and Tested-by tags.
---
 drivers/gpu/drm/exynos/exynos_dp.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 5bcf41e0bd04..f469ac5b3c2a 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -36,7 +36,6 @@
 struct exynos_dp_device {
 	struct drm_encoder         encoder;
 	struct drm_connector       *connector;
-	struct drm_bridge          *ptn_bridge;
 	struct drm_device          *drm_dev;
 	struct device              *dev;
 
@@ -106,8 +105,8 @@ static int exynos_dp_bridge_attach(struct analogix_dp_plat_data *plat_data,
 	dp->connector = connector;
 
 	/* Pre-empt DP connector creation if there's a bridge */
-	if (dp->ptn_bridge) {
-		ret = drm_bridge_attach(&dp->encoder, dp->ptn_bridge, bridge,
+	if (plat_data->next_bridge) {
+		ret = drm_bridge_attach(&dp->encoder, plat_data->next_bridge, bridge,
 					0);
 		if (ret)
 			return ret;
@@ -155,7 +154,7 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 
 	dp->drm_dev = drm_dev;
 
-	if (!dp->plat_data.panel && !dp->ptn_bridge) {
+	if (!dp->plat_data.panel && !dp->plat_data.next_bridge) {
 		ret = exynos_dp_dt_parse_panel(dp);
 		if (ret)
 			return ret;
@@ -232,6 +231,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	/* The remote port can be either a panel or a bridge */
 	dp->plat_data.panel = panel;
+	dp->plat_data.next_bridge = bridge;
 	dp->plat_data.dev_type = EXYNOS_DP;
 	dp->plat_data.power_on = exynos_dp_poweron;
 	dp->plat_data.power_off = exynos_dp_poweroff;
@@ -239,8 +239,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	dp->plat_data.get_modes = exynos_dp_get_modes;
 	dp->plat_data.skip_connector = !!bridge;
 
-	dp->ptn_bridge = bridge;
-
 out:
 	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
 	if (IS_ERR(dp->adp))
-- 
2.34.1

[PATCH v9 04/15] drm/exynos: exynos_dp: Remove unused &exynos_dp_device.connector

[Damon Ding]

The &exynos_dp_device.connector is assigned in exynos_dp_bridge_attach()
but never used. It should make sense to remove it.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

---

Changes in v5:
- Fix the 'drm/bridge' to 'drm/exynos' in commit message.

Changes in v9:
- Add Reviewed-by and Tested-by tags.
---
 drivers/gpu/drm/exynos/exynos_dp.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index f469ac5b3c2a..e20513164032 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -35,7 +35,6 @@
 
 struct exynos_dp_device {
 	struct drm_encoder         encoder;
-	struct drm_connector       *connector;
 	struct drm_device          *drm_dev;
 	struct device              *dev;
 
@@ -102,8 +101,6 @@ static int exynos_dp_bridge_attach(struct analogix_dp_plat_data *plat_data,
 	struct exynos_dp_device *dp = to_dp(plat_data);
 	int ret;
 
-	dp->connector = connector;
-
 	/* Pre-empt DP connector creation if there's a bridge */
 	if (plat_data->next_bridge) {
 		ret = drm_bridge_attach(&dp->encoder, plat_data->next_bridge, bridge,
-- 
2.34.1

[PATCH v9 05/15] drm/exynos: exynos_dp: Apply of-display-mode-bridge to parse the display-timings node

[Damon Ding]

If there is neither a panel nor a bridge, the display timing can be
parsed from the display-timings node under the dp node.

In order to get rid of &analogix_dp_plat_data.get_modes() and make
the codes more consistent, apply DRM of-display-mode-bridge to parse
display timings.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

------

Changes in v6:
- Apply DRM legacy bridge to parse display timings instead of
  implementing the same codes only for Exynos DP.

Changes in v7:
- Use temporary flag &exynos_dp_device.has_of_bridge, which will be
  removed in the following patch, instead of applying API
  drm_bridge_is_legacy().
- Remove exynos_dp_legacy_bridge_init() and inline API
  devm_drm_of_display_mode_bridge().

Changes in v9:
- Add Tested-by tag.
---
 drivers/gpu/drm/exynos/Kconfig     |  1 +
 drivers/gpu/drm/exynos/exynos_dp.c | 66 ++++++++----------------------
 2 files changed, 17 insertions(+), 50 deletions(-)

diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 0d13828e7d9e..380d9a8ce259 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -72,6 +72,7 @@ config DRM_EXYNOS_DP
 	select DRM_ANALOGIX_DP
 	select DRM_DISPLAY_DP_HELPER
 	default DRM_EXYNOS
+	select DRM_OF_DISPLAY_MODE_BRIDGE
 	select DRM_PANEL
 	help
 	  This enables support for DP device.
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index e20513164032..ac16138a22fe 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -19,6 +19,7 @@
 #include <video/videomode.h>
 
 #include <drm/bridge/analogix_dp.h>
+#include <drm/bridge/of-display-mode-bridge.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
 #include <drm/drm_crtc.h>
@@ -38,9 +39,10 @@ struct exynos_dp_device {
 	struct drm_device          *drm_dev;
 	struct device              *dev;
 
-	struct videomode           vm;
 	struct analogix_dp_device *adp;
 	struct analogix_dp_plat_data plat_data;
+
+	bool has_of_bridge;
 };
 
 static int exynos_dp_crtc_clock_enable(struct analogix_dp_plat_data *plat_data,
@@ -67,44 +69,20 @@ static int exynos_dp_poweroff(struct analogix_dp_plat_data *plat_data)
 	return exynos_dp_crtc_clock_enable(plat_data, false);
 }
 
-static int exynos_dp_get_modes(struct analogix_dp_plat_data *plat_data,
-			       struct drm_connector *connector)
-{
-	struct exynos_dp_device *dp = to_dp(plat_data);
-	struct drm_display_mode *mode;
-
-	if (dp->plat_data.panel)
-		return 0;
-
-	mode = drm_mode_create(connector->dev);
-	if (!mode) {
-		DRM_DEV_ERROR(dp->dev,
-			      "failed to create a new display mode.\n");
-		return 0;
-	}
-
-	drm_display_mode_from_videomode(&dp->vm, mode);
-	connector->display_info.width_mm = mode->width_mm;
-	connector->display_info.height_mm = mode->height_mm;
-
-	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
-	drm_mode_set_name(mode);
-	drm_mode_probed_add(connector, mode);
-
-	return 1;
-}
-
 static int exynos_dp_bridge_attach(struct analogix_dp_plat_data *plat_data,
 				   struct drm_bridge *bridge,
 				   struct drm_connector *connector)
 {
 	struct exynos_dp_device *dp = to_dp(plat_data);
+	enum drm_bridge_attach_flags flags = 0;
 	int ret;
 
 	/* Pre-empt DP connector creation if there's a bridge */
 	if (plat_data->next_bridge) {
-		ret = drm_bridge_attach(&dp->encoder, plat_data->next_bridge, bridge,
-					0);
+		if (dp->has_of_bridge)
+			flags = DRM_BRIDGE_ATTACH_NO_CONNECTOR;
+
+		ret = drm_bridge_attach(&dp->encoder, plat_data->next_bridge, bridge, flags);
 		if (ret)
 			return ret;
 	}
@@ -129,19 +107,6 @@ static const struct drm_encoder_helper_funcs exynos_dp_encoder_helper_funcs = {
 	.disable = exynos_dp_nop,
 };
 
-static int exynos_dp_dt_parse_panel(struct exynos_dp_device *dp)
-{
-	int ret;
-
-	ret = of_get_videomode(dp->dev->of_node, &dp->vm, OF_USE_NATIVE_MODE);
-	if (ret) {
-		DRM_DEV_ERROR(dp->dev,
-			      "failed: of_get_videomode() : %d\n", ret);
-		return ret;
-	}
-	return 0;
-}
-
 static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 {
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
@@ -151,12 +116,6 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 
 	dp->drm_dev = drm_dev;
 
-	if (!dp->plat_data.panel && !dp->plat_data.next_bridge) {
-		ret = exynos_dp_dt_parse_panel(dp);
-		if (ret)
-			return ret;
-	}
-
 	drm_simple_encoder_init(drm_dev, encoder, DRM_MODE_ENCODER_TMDS);
 
 	drm_encoder_helper_add(encoder, &exynos_dp_encoder_helper_funcs);
@@ -223,6 +182,14 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	}
 
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, &bridge);
+	if (ret == -ENODEV) {
+		dp->plat_data.next_bridge = devm_drm_of_display_mode_bridge(dp->dev,
+									dp->dev->of_node,
+									DRM_MODE_CONNECTOR_eDP);
+		ret = IS_ERR(dp->plat_data.next_bridge) ? PTR_ERR(dp->plat_data.next_bridge) : 0;
+		if (!ret)
+			dp->has_of_bridge = true;
+	}
 	if (ret)
 		return ret;
 
@@ -233,7 +200,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	dp->plat_data.power_on = exynos_dp_poweron;
 	dp->plat_data.power_off = exynos_dp_poweroff;
 	dp->plat_data.attach = exynos_dp_bridge_attach;
-	dp->plat_data.get_modes = exynos_dp_get_modes;
 	dp->plat_data.skip_connector = !!bridge;
 
 out:
-- 
2.34.1

[PATCH v9 06/15] drm/bridge: analogix_dp: Remove redundant &analogix_dp_plat_data.skip_connector

[Damon Ding]

The &analogix_dp_plat_data.skip_connector related check can be replaced
by &analogix_dp_plat_data.bridge.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

------

Changes in v3:
- Squash the Exynos side commit and the Analogix side commit together.

Changes in v4:
- Rename the &analogix_dp_plat_data.bridge to
  &analogix_dp_plat_data.next_bridge.

Changes in v9:
- Add Tested-by tag.
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 2 +-
 drivers/gpu/drm/exynos/exynos_dp.c                 | 1 -
 include/drm/bridge/analogix_dp.h                   | 1 -
 3 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 3caa47d31649..4606ecc3f480 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -959,7 +959,7 @@ static int analogix_dp_bridge_attach(struct drm_bridge *bridge,
 		return -EINVAL;
 	}
 
-	if (!dp->plat_data->skip_connector) {
+	if (!dp->plat_data->next_bridge) {
 		connector = &dp->connector;
 		connector->polled = DRM_CONNECTOR_POLL_HPD;
 
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index ac16138a22fe..1eeb0b15f99a 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -200,7 +200,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	dp->plat_data.power_on = exynos_dp_poweron;
 	dp->plat_data.power_off = exynos_dp_poweroff;
 	dp->plat_data.attach = exynos_dp_bridge_attach;
-	dp->plat_data.skip_connector = !!bridge;
 
 out:
 	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 582357c20640..f06da105d8f2 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -30,7 +30,6 @@ struct analogix_dp_plat_data {
 	struct drm_bridge *next_bridge;
 	struct drm_encoder *encoder;
 	struct drm_connector *connector;
-	bool skip_connector;
 
 	int (*power_on)(struct analogix_dp_plat_data *);
 	int (*power_off)(struct analogix_dp_plat_data *);
-- 
2.34.1

[PATCH v9 07/15] drm/bridge: analogix_dp: Move the color format check to .atomic_check() for Rockchip platforms

[Damon Ding]

For Rockchip platforms, the YUV color formats are currently unsupported.
This compatibility check was previously implemented in
&analogix_dp_plat_data.get_modes().

Moving color format check to &drm_connector_helper_funcs.atomic_check()
would get rid of &analogix_dp_plat_data.get_modes() and be more
reasonable than before.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

---

Changes in v9:
- Add Tested-by tag.
---
 .../gpu/drm/bridge/analogix/analogix_dp_core.c | 11 +++++++++++
 .../gpu/drm/rockchip/analogix_dp-rockchip.c    | 18 ------------------
 2 files changed, 11 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 4606ecc3f480..5bf41b364aba 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -894,8 +894,19 @@ static int analogix_dp_atomic_check(struct drm_connector *connector,
 				    struct drm_atomic_state *state)
 {
 	struct analogix_dp_device *dp = to_dp(connector);
+	struct drm_display_info *di = &connector->display_info;
 	struct drm_connector_state *conn_state;
 	struct drm_crtc_state *crtc_state;
+	u32 mask = DRM_COLOR_FORMAT_YCBCR444 | DRM_COLOR_FORMAT_YCBCR422;
+
+	if (is_rockchip(dp->plat_data->dev_type)) {
+		if ((di->color_formats & mask)) {
+			DRM_DEBUG_KMS("Swapping display color format from YUV to RGB\n");
+			di->color_formats &= ~mask;
+			di->color_formats |= DRM_COLOR_FORMAT_RGB444;
+			di->bpc = 8;
+		}
+	}
 
 	conn_state = drm_atomic_get_new_connector_state(state, connector);
 	if (WARN_ON(!conn_state))
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index fdab71d51e2a..70fe5ae69e2e 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -166,23 +166,6 @@ static int rockchip_dp_powerdown(struct analogix_dp_plat_data *plat_data)
 	return 0;
 }
 
-static int rockchip_dp_get_modes(struct analogix_dp_plat_data *plat_data,
-				 struct drm_connector *connector)
-{
-	struct drm_display_info *di = &connector->display_info;
-	/* VOP couldn't output YUV video format for eDP rightly */
-	u32 mask = DRM_COLOR_FORMAT_YCBCR444 | DRM_COLOR_FORMAT_YCBCR422;
-
-	if ((di->color_formats & mask)) {
-		DRM_DEBUG_KMS("Swapping display color format from YUV to RGB\n");
-		di->color_formats &= ~mask;
-		di->color_formats |= DRM_COLOR_FORMAT_RGB444;
-		di->bpc = 8;
-	}
-
-	return 0;
-}
-
 static bool
 rockchip_dp_drm_encoder_mode_fixup(struct drm_encoder *encoder,
 				   const struct drm_display_mode *mode,
@@ -481,7 +464,6 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 	dp->plat_data.dev_type = dp->data->chip_type;
 	dp->plat_data.power_on = rockchip_dp_poweron;
 	dp->plat_data.power_off = rockchip_dp_powerdown;
-	dp->plat_data.get_modes = rockchip_dp_get_modes;
 
 	ret = rockchip_dp_of_probe(dp);
 	if (ret < 0)
-- 
2.34.1

[PATCH v9 08/15] drm/bridge: analogix_dp: Remove unused &analogix_dp_plat_data.get_modes()

[Damon Ding]

The callback &analogix_dp_plat_data.get_modes() is not implemented
by either Rockchip side or Exynos side.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

---

Changes in v9:
- Add Tested-by tag.
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 3 ---
 include/drm/bridge/analogix_dp.h                   | 2 --
 2 files changed, 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 5bf41b364aba..b0bc96693fdb 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -875,9 +875,6 @@ static int analogix_dp_get_modes(struct drm_connector *connector)
 		}
 	}
 
-	if (dp->plat_data->get_modes)
-		num_modes += dp->plat_data->get_modes(dp->plat_data, connector);
-
 	return num_modes;
 }
 
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index f06da105d8f2..3301392eda5f 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -35,8 +35,6 @@ struct analogix_dp_plat_data {
 	int (*power_off)(struct analogix_dp_plat_data *);
 	int (*attach)(struct analogix_dp_plat_data *, struct drm_bridge *,
 		      struct drm_connector *);
-	int (*get_modes)(struct analogix_dp_plat_data *,
-			 struct drm_connector *);
 };
 
 int analogix_dp_resume(struct analogix_dp_device *dp);
-- 
2.34.1

[PATCH v9 09/15] drm/bridge: analogix_dp: Apply drm_bridge_connector helper

[Damon Ding]

Apply drm_bridge_connector helper for Analogix DP driver.

The following changes have been made:
- Apply drm_bridge_connector helper to get rid of &drm_connector_funcs
  and &drm_connector_helper_funcs.
- Remove unnecessary parameter struct drm_connector* for callback
  &analogix_dp_plat_data.attach.
- Remove &analogix_dp_device.connector.
- Convert analogix_dp_atomic_check()/analogix_dp_detect() to
  &drm_bridge_funcs.atomic_check()/&drm_bridge_funcs.detect().
- Split analogix_dp_get_modes() into &drm_bridge_funcs.get_modes() and
  &drm_bridge_funcs.edid_read().
- Set flag DRM_BRIDGE_ATTACH_NO_CONNECTOR for bridge attachment while
  binding. Meanwhile, make DRM_BRIDGE_ATTACH_NO_CONNECTOR unsuppported
  in analogix_dp_bridge_attach().
- Set &drm_bridge.ops according to different cases.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

------

Changes in v2:
- For &drm_bridge.ops, remove DRM_BRIDGE_OP_HPD and add
  DRM_BRIDGE_OP_EDID.
- Add analogix_dp_bridge_edid_read().
- Move &analogix_dp_plat_data.skip_connector deletion to the previous
  patches.

Changes in v3:
- Rebase with the new devm_drm_bridge_alloc() related commit
  48f05c3b4b70 ("drm/bridge: analogix_dp: Use devm_drm_bridge_alloc()
  API").
- Expand the commit message.
- Call drm_bridge_get_modes() in analogix_dp_bridge_get_modes() if the
  bridge is available.
- Remove unnecessary parameter struct drm_connector* for callback
  &analogix_dp_plat_data.attach.
- In order to decouple the connector driver and the bridge driver, move
  the bridge connector initilization to the Rockchip and Exynos sides.

Changes in v4:
- Expand analogix_dp_bridge_detect() parameters to &drm_bridge and
  &drm_connector.
- Rename the &analogix_dp_plat_data.bridge to
  &analogix_dp_plat_data.next_bridge.

Changes in v5:
- Set the flag fo drm_bridge_attach() to DRM_BRIDGE_ATTACH_NO_CONNECTOR
  for next bridge attachment of Exynos side.
- Distinguish the &drm_bridge->ops of Analogix bridge based on whether
  the downstream device is a panel, a bridge or neither.
- Remove the calls to &analogix_dp_plat_data.get_modes().

Changes in v6:
- Select DRM_BRIDGE_CONNECTOR for both Rockchip and Exynos sides.
- Remove unnecessary drm_bridge_get_modes() in
  analogix_dp_bridge_get_modes().
- Simplify analogix_dp_bridge_edid_read().
- If the next is a bridge, set DRM_BRIDGE_OP_DETECT and return
  connector_status_connected in analogix_dp_bridge_detect().
- Set flag DRM_BRIDGE_ATTACH_NO_CONNECTOR for bridge attachment while
  binding. Meanwhile, make DRM_BRIDGE_ATTACH_NO_CONNECTOR unsuppported
  in analogix_dp_bridge_attach().
- Simplify the check of bridge capabilities.

Changes in v7:
- Remove temporary flag &exynos_dp_device.has_of_bridge.

Change in v9
- Add Tested-by tag.
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 148 ++++++++----------
 .../drm/bridge/analogix/analogix_dp_core.h    |   1 -
 drivers/gpu/drm/exynos/Kconfig                |   1 +
 drivers/gpu/drm/exynos/exynos_dp.c            |  29 ++--
 drivers/gpu/drm/rockchip/Kconfig              |   1 +
 .../gpu/drm/rockchip/analogix_dp-rockchip.c   |  11 +-
 include/drm/bridge/analogix_dp.h              |   3 +-
 7 files changed, 90 insertions(+), 104 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index b0bc96693fdb..81c6e81dd352 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -856,44 +856,32 @@ static int analogix_dp_disable_psr(struct analogix_dp_device *dp)
 	return analogix_dp_send_psr_spd(dp, &psr_vsc, true);
 }
 
-static int analogix_dp_get_modes(struct drm_connector *connector)
+static int analogix_dp_bridge_get_modes(struct drm_bridge *bridge, struct drm_connector *connector)
 {
-	struct analogix_dp_device *dp = to_dp(connector);
-	const struct drm_edid *drm_edid;
+	struct analogix_dp_device *dp = to_dp(bridge);
 	int num_modes = 0;
 
-	if (dp->plat_data->panel) {
+	if (dp->plat_data->panel)
 		num_modes += drm_panel_get_modes(dp->plat_data->panel, connector);
-	} else {
-		drm_edid = drm_edid_read_ddc(connector, &dp->aux.ddc);
-
-		drm_edid_connector_update(&dp->connector, drm_edid);
-
-		if (drm_edid) {
-			num_modes += drm_edid_connector_add_modes(&dp->connector);
-			drm_edid_free(drm_edid);
-		}
-	}
 
 	return num_modes;
 }
 
-static struct drm_encoder *
-analogix_dp_best_encoder(struct drm_connector *connector)
+static const struct drm_edid *analogix_dp_bridge_edid_read(struct drm_bridge *bridge,
+							   struct drm_connector *connector)
 {
-	struct analogix_dp_device *dp = to_dp(connector);
+	struct analogix_dp_device *dp = to_dp(bridge);
 
-	return dp->encoder;
+	return drm_edid_read_ddc(connector, &dp->aux.ddc);
 }
 
-
-static int analogix_dp_atomic_check(struct drm_connector *connector,
-				    struct drm_atomic_state *state)
+static int analogix_dp_bridge_atomic_check(struct drm_bridge *bridge,
+					   struct drm_bridge_state *bridge_state,
+					   struct drm_crtc_state *crtc_state,
+					   struct drm_connector_state *conn_state)
 {
-	struct analogix_dp_device *dp = to_dp(connector);
-	struct drm_display_info *di = &connector->display_info;
-	struct drm_connector_state *conn_state;
-	struct drm_crtc_state *crtc_state;
+	struct analogix_dp_device *dp = to_dp(bridge);
+	struct drm_display_info *di = &conn_state->connector->display_info;
 	u32 mask = DRM_COLOR_FORMAT_YCBCR444 | DRM_COLOR_FORMAT_YCBCR422;
 
 	if (is_rockchip(dp->plat_data->dev_type)) {
@@ -905,38 +893,21 @@ static int analogix_dp_atomic_check(struct drm_connector *connector,
 		}
 	}
 
-	conn_state = drm_atomic_get_new_connector_state(state, connector);
-	if (WARN_ON(!conn_state))
-		return -ENODEV;
-
 	conn_state->self_refresh_aware = true;
 
-	if (!conn_state->crtc)
-		return 0;
-
-	crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc);
-	if (!crtc_state)
-		return 0;
-
 	if (crtc_state->self_refresh_active && !dp->psr_supported)
 		return -EINVAL;
 
 	return 0;
 }
 
-static const struct drm_connector_helper_funcs analogix_dp_connector_helper_funcs = {
-	.get_modes = analogix_dp_get_modes,
-	.best_encoder = analogix_dp_best_encoder,
-	.atomic_check = analogix_dp_atomic_check,
-};
-
 static enum drm_connector_status
-analogix_dp_detect(struct drm_connector *connector, bool force)
+analogix_dp_bridge_detect(struct drm_bridge *bridge, struct drm_connector *connector)
 {
-	struct analogix_dp_device *dp = to_dp(connector);
+	struct analogix_dp_device *dp = to_dp(bridge);
 	enum drm_connector_status status = connector_status_disconnected;
 
-	if (dp->plat_data->panel)
+	if (dp->plat_data->panel || dp->plat_data->next_bridge)
 		return connector_status_connected;
 
 	if (!analogix_dp_detect_hpd(dp))
@@ -945,53 +916,20 @@ analogix_dp_detect(struct drm_connector *connector, bool force)
 	return status;
 }
 
-static const struct drm_connector_funcs analogix_dp_connector_funcs = {
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.detect = analogix_dp_detect,
-	.destroy = drm_connector_cleanup,
-	.reset = drm_atomic_helper_connector_reset,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
 static int analogix_dp_bridge_attach(struct drm_bridge *bridge,
 				     struct drm_encoder *encoder,
 				     enum drm_bridge_attach_flags flags)
 {
 	struct analogix_dp_device *dp = to_dp(bridge);
-	struct drm_connector *connector = NULL;
 	int ret = 0;
 
-	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
-		DRM_ERROR("Fix bridge driver to make connector optional!");
+	if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
+		DRM_ERROR("Unsupported connector creation\n");
 		return -EINVAL;
 	}
 
-	if (!dp->plat_data->next_bridge) {
-		connector = &dp->connector;
-		connector->polled = DRM_CONNECTOR_POLL_HPD;
-
-		ret = drm_connector_init(dp->drm_dev, connector,
-					 &analogix_dp_connector_funcs,
-					 DRM_MODE_CONNECTOR_eDP);
-		if (ret) {
-			DRM_ERROR("Failed to initialize connector with drm\n");
-			return ret;
-		}
-
-		drm_connector_helper_add(connector,
-					 &analogix_dp_connector_helper_funcs);
-		drm_connector_attach_encoder(connector, encoder);
-	}
-
-	/*
-	 * NOTE: the connector registration is implemented in analogix
-	 * platform driver, that to say connector would be exist after
-	 * plat_data->attch return, that's why we record the connector
-	 * point after plat attached.
-	 */
 	if (dp->plat_data->attach) {
-		ret = dp->plat_data->attach(dp->plat_data, bridge, connector);
+		ret = dp->plat_data->attach(dp->plat_data, bridge);
 		if (ret) {
 			DRM_ERROR("Failed at platform attach func\n");
 			return ret;
@@ -1095,14 +1033,21 @@ static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
 }
 
 static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
+					struct drm_atomic_state *state,
 					const struct drm_display_mode *mode)
 {
 	struct analogix_dp_device *dp = to_dp(bridge);
-	struct drm_display_info *display_info = &dp->connector.display_info;
 	struct video_info *video = &dp->video_info;
 	struct device_node *dp_node = dp->dev->of_node;
+	struct drm_connector *connector;
+	struct drm_display_info *display_info;
 	int vic;
 
+	connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
+	if (!connector)
+		return;
+	display_info = &connector->display_info;
+
 	/* Input video interlaces & hsync pol & vsync pol */
 	video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
 	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
@@ -1186,7 +1131,7 @@ static void analogix_dp_bridge_atomic_enable(struct drm_bridge *bridge,
 	new_crtc_state = drm_atomic_get_new_crtc_state(old_state, crtc);
 	if (!new_crtc_state)
 		return;
-	analogix_dp_bridge_mode_set(bridge, &new_crtc_state->adjusted_mode);
+	analogix_dp_bridge_mode_set(bridge, old_state, &new_crtc_state->adjusted_mode);
 
 	old_crtc_state = drm_atomic_get_old_crtc_state(old_state, crtc);
 	/* Not a full enable, just disable PSR and continue */
@@ -1302,7 +1247,11 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
 	.atomic_enable = analogix_dp_bridge_atomic_enable,
 	.atomic_disable = analogix_dp_bridge_atomic_disable,
 	.atomic_post_disable = analogix_dp_bridge_atomic_post_disable,
+	.atomic_check = analogix_dp_bridge_atomic_check,
 	.attach = analogix_dp_bridge_attach,
+	.get_modes = analogix_dp_bridge_get_modes,
+	.edid_read = analogix_dp_bridge_edid_read,
+	.detect = analogix_dp_bridge_detect,
 };
 
 static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
@@ -1532,6 +1481,7 @@ EXPORT_SYMBOL_GPL(analogix_dp_resume);
 
 int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
 {
+	struct drm_bridge *bridge = &dp->bridge;
 	int ret;
 
 	dp->drm_dev = drm_dev;
@@ -1545,7 +1495,18 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
 		return ret;
 	}
 
-	ret = drm_bridge_attach(dp->encoder, &dp->bridge, NULL, 0);
+	if (dp->plat_data->panel)
+		bridge->ops = DRM_BRIDGE_OP_MODES | DRM_BRIDGE_OP_DETECT;
+	else
+		bridge->ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
+
+	bridge->of_node = dp->dev->of_node;
+	bridge->type = DRM_MODE_CONNECTOR_eDP;
+	ret = devm_drm_bridge_add(dp->dev, &dp->bridge);
+	if (ret)
+		goto err_unregister_aux;
+
+	ret = drm_bridge_attach(dp->encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret) {
 		DRM_ERROR("failed to create bridge (%d)\n", ret);
 		goto err_unregister_aux;
@@ -1563,7 +1524,6 @@ EXPORT_SYMBOL_GPL(analogix_dp_bind);
 void analogix_dp_unbind(struct analogix_dp_device *dp)
 {
 	analogix_dp_bridge_disable(&dp->bridge);
-	dp->connector.funcs->destroy(&dp->connector);
 
 	drm_panel_unprepare(dp->plat_data->panel);
 
@@ -1573,7 +1533,8 @@ EXPORT_SYMBOL_GPL(analogix_dp_unbind);
 
 int analogix_dp_start_crc(struct drm_connector *connector)
 {
-	struct analogix_dp_device *dp = to_dp(connector);
+	struct analogix_dp_device *dp;
+	struct drm_bridge *bridge;
 
 	if (!connector->state->crtc) {
 		DRM_ERROR("Connector %s doesn't currently have a CRTC.\n",
@@ -1581,13 +1542,26 @@ int analogix_dp_start_crc(struct drm_connector *connector)
 		return -EINVAL;
 	}
 
+	bridge = drm_bridge_chain_get_first_bridge(connector->encoder);
+	if (bridge->type != DRM_MODE_CONNECTOR_eDP)
+		return -EINVAL;
+
+	dp = to_dp(bridge);
+
 	return drm_dp_start_crc(&dp->aux, connector->state->crtc);
 }
 EXPORT_SYMBOL_GPL(analogix_dp_start_crc);
 
 int analogix_dp_stop_crc(struct drm_connector *connector)
 {
-	struct analogix_dp_device *dp = to_dp(connector);
+	struct analogix_dp_device *dp;
+	struct drm_bridge *bridge;
+
+	bridge = drm_bridge_chain_get_first_bridge(connector->encoder);
+	if (bridge->type != DRM_MODE_CONNECTOR_eDP)
+		return -EINVAL;
+
+	dp = to_dp(bridge);
 
 	return drm_dp_stop_crc(&dp->aux);
 }
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 91b215c6a0cf..17347448c6b0 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -154,7 +154,6 @@ struct analogix_dp_device {
 	struct drm_encoder	*encoder;
 	struct device		*dev;
 	struct drm_device	*drm_dev;
-	struct drm_connector	connector;
 	struct drm_bridge	bridge;
 	struct drm_dp_aux	aux;
 	struct clk		*clock;
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 380d9a8ce259..38bf070866f6 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -70,6 +70,7 @@ config DRM_EXYNOS_DP
 	bool "Exynos specific extensions for Analogix DP driver"
 	depends on DRM_EXYNOS_FIMD || DRM_EXYNOS7_DECON
 	select DRM_ANALOGIX_DP
+	select DRM_BRIDGE_CONNECTOR
 	select DRM_DISPLAY_DP_HELPER
 	default DRM_EXYNOS
 	select DRM_OF_DISPLAY_MODE_BRIDGE
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 1eeb0b15f99a..478eaa6f3175 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -22,6 +22,7 @@
 #include <drm/bridge/of-display-mode-bridge.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
@@ -41,8 +42,6 @@ struct exynos_dp_device {
 
 	struct analogix_dp_device *adp;
 	struct analogix_dp_plat_data plat_data;
-
-	bool has_of_bridge;
 };
 
 static int exynos_dp_crtc_clock_enable(struct analogix_dp_plat_data *plat_data,
@@ -70,19 +69,15 @@ static int exynos_dp_poweroff(struct analogix_dp_plat_data *plat_data)
 }
 
 static int exynos_dp_bridge_attach(struct analogix_dp_plat_data *plat_data,
-				   struct drm_bridge *bridge,
-				   struct drm_connector *connector)
+				   struct drm_bridge *bridge)
 {
 	struct exynos_dp_device *dp = to_dp(plat_data);
-	enum drm_bridge_attach_flags flags = 0;
 	int ret;
 
 	/* Pre-empt DP connector creation if there's a bridge */
 	if (plat_data->next_bridge) {
-		if (dp->has_of_bridge)
-			flags = DRM_BRIDGE_ATTACH_NO_CONNECTOR;
-
-		ret = drm_bridge_attach(&dp->encoder, plat_data->next_bridge, bridge, flags);
+		ret = drm_bridge_attach(&dp->encoder, plat_data->next_bridge, bridge,
+					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 		if (ret)
 			return ret;
 	}
@@ -112,6 +107,7 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &dp->encoder;
 	struct drm_device *drm_dev = data;
+	struct drm_connector *connector;
 	int ret;
 
 	dp->drm_dev = drm_dev;
@@ -127,10 +123,19 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 	dp->plat_data.encoder = encoder;
 
 	ret = analogix_dp_bind(dp->adp, dp->drm_dev);
-	if (ret)
+	if (ret) {
 		dp->encoder.funcs->destroy(&dp->encoder);
+		return ret;
+	}
+
+	connector = drm_bridge_connector_init(dp->drm_dev, dp->plat_data.encoder);
+	if (IS_ERR(connector)) {
+		ret = PTR_ERR(connector);
+		dev_err(dp->dev, "Failed to initialize bridge_connector\n");
+		return ret;
+	}
 
-	return ret;
+	return drm_connector_attach_encoder(connector, dp->plat_data.encoder);
 }
 
 static void exynos_dp_unbind(struct device *dev, struct device *master,
@@ -187,8 +192,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 									dp->dev->of_node,
 									DRM_MODE_CONNECTOR_eDP);
 		ret = IS_ERR(dp->plat_data.next_bridge) ? PTR_ERR(dp->plat_data.next_bridge) : 0;
-		if (!ret)
-			dp->has_of_bridge = true;
 	}
 	if (ret)
 		return ret;
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 1479b8c4ed40..e7f49fe845ea 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -46,6 +46,7 @@ config ROCKCHIP_VOP2
 config ROCKCHIP_ANALOGIX_DP
 	bool "Rockchip specific extensions for Analogix DP driver"
 	depends on ROCKCHIP_VOP
+	select DRM_BRIDGE_CONNECTOR
 	select DRM_DISPLAY_HELPER
 	select DRM_DISPLAY_DP_HELPER
 	help
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 70fe5ae69e2e..7fa17ba26c46 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -25,6 +25,7 @@
 #include <drm/display/drm_dp_helper.h>
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/bridge/analogix_dp.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
@@ -369,6 +370,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 {
 	struct rockchip_dp_device *dp = dev_get_drvdata(dev);
 	struct drm_device *drm_dev = data;
+	struct drm_connector *connector;
 	int ret;
 
 	dp->drm_dev = drm_dev;
@@ -388,7 +390,14 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 	if (ret)
 		goto err_cleanup_encoder;
 
-	return 0;
+	connector = drm_bridge_connector_init(dp->drm_dev, dp->plat_data.encoder);
+	if (IS_ERR(connector)) {
+		ret = PTR_ERR(connector);
+		dev_err(dp->dev, "Failed to initialize bridge_connector\n");
+		goto err_cleanup_encoder;
+	}
+
+	return drm_connector_attach_encoder(connector, dp->plat_data.encoder);
 err_cleanup_encoder:
 	dp->encoder.encoder.funcs->destroy(&dp->encoder.encoder);
 	return ret;
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 3301392eda5f..3428ffff24c5 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -33,8 +33,7 @@ struct analogix_dp_plat_data {
 
 	int (*power_on)(struct analogix_dp_plat_data *);
 	int (*power_off)(struct analogix_dp_plat_data *);
-	int (*attach)(struct analogix_dp_plat_data *, struct drm_bridge *,
-		      struct drm_connector *);
+	int (*attach)(struct analogix_dp_plat_data *, struct drm_bridge *);
 };
 
 int analogix_dp_resume(struct analogix_dp_device *dp);
-- 
2.34.1

[PATCH v9 10/15] drm/bridge: analogix_dp: Add new API analogix_dp_finish_probe()

[Damon Ding]

Since the panel/bridge should logically be positioned behind the
Analogix bridge in the display pipeline, it makes sense to handle
the panel/bridge parsing on the Analogix side. Therefore, we add
a new API analogix_dp_finish_probe(), which combines the panel/bridge
parsing with component addition, to do it.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

---

Changes in v4:
- Rename the &analogix_dp_plat_data.bridge to
  &analogix_dp_plat_data.next_bridge.
- Remame API analogix_dp_find_panel_or_bridge() to
  analogix_dp_finish_probe().

Changes in v5:
- Select DRM_DISPLAY_DP_AUX_BUS for DRM_ANALOGIX_DP.

Changes in v9:
- Add Tested-by tag.
---
 drivers/gpu/drm/bridge/analogix/Kconfig       |  1 +
 .../drm/bridge/analogix/analogix_dp_core.c    | 48 +++++++++++++++++++
 include/drm/bridge/analogix_dp.h              |  2 +
 3 files changed, 51 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
index 4846b2e9be7c..964122b5bd39 100644
--- a/drivers/gpu/drm/bridge/analogix/Kconfig
+++ b/drivers/gpu/drm/bridge/analogix/Kconfig
@@ -29,6 +29,7 @@ config DRM_ANALOGIX_ANX78XX
 config DRM_ANALOGIX_DP
 	tristate
 	depends on DRM
+	select DRM_DISPLAY_DP_AUX_BUS
 
 config DRM_ANALOGIX_ANX7625
 	tristate "Analogix Anx7625 MIPI to DP interface support"
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 81c6e81dd352..933f1843777f 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -20,12 +20,14 @@
 #include <linux/platform_device.h>
 
 #include <drm/bridge/analogix_dp.h>
+#include <drm/display/drm_dp_aux_bus.h>
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_device.h>
 #include <drm/drm_edid.h>
+#include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
@@ -1581,6 +1583,52 @@ struct drm_dp_aux *analogix_dp_get_aux(struct analogix_dp_device *dp)
 }
 EXPORT_SYMBOL_GPL(analogix_dp_get_aux);
 
+static int analogix_dp_aux_done_probing(struct drm_dp_aux *aux)
+{
+	struct analogix_dp_device *dp = to_dp(aux);
+	struct analogix_dp_plat_data *plat_data = dp->plat_data;
+	int port = plat_data->dev_type == EXYNOS_DP ? 0 : 1;
+	int ret;
+
+	/*
+	 * If drm_of_find_panel_or_bridge() returns -ENODEV, there may be no valid panel
+	 * or bridge nodes. The driver should go on for the driver-free bridge or the DP
+	 * mode applications.
+	 */
+	ret = drm_of_find_panel_or_bridge(dp->dev->of_node, port, 0,
+					  &plat_data->panel, &plat_data->next_bridge);
+	if (ret && ret != -ENODEV)
+		return ret;
+
+	return component_add(dp->dev, plat_data->ops);
+}
+
+int analogix_dp_finish_probe(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	ret = devm_of_dp_aux_populate_bus(&dp->aux, analogix_dp_aux_done_probing);
+	if (ret) {
+		/*
+		 * If devm_of_dp_aux_populate_bus() returns -ENODEV, the done_probing() will
+		 * not be called because there are no EP devices. Then the callback function
+		 * analogix_dp_aux_done_probing() will be called directly in order to support
+		 * the other valid DT configurations.
+		 *
+		 * NOTE: The devm_of_dp_aux_populate_bus() is allowed to return -EPROBE_DEFER.
+		 */
+		if (ret != -ENODEV) {
+			dev_err(dp->dev, "failed to populate aux bus\n");
+			return ret;
+		}
+
+		return analogix_dp_aux_done_probing(&dp->aux);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_finish_probe);
+
 MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
 MODULE_DESCRIPTION("Analogix DP Core Driver");
 MODULE_LICENSE("GPL v2");
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 3428ffff24c5..bae969dec63a 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -30,6 +30,7 @@ struct analogix_dp_plat_data {
 	struct drm_bridge *next_bridge;
 	struct drm_encoder *encoder;
 	struct drm_connector *connector;
+	const struct component_ops *ops;
 
 	int (*power_on)(struct analogix_dp_plat_data *);
 	int (*power_off)(struct analogix_dp_plat_data *);
@@ -49,5 +50,6 @@ int analogix_dp_stop_crc(struct drm_connector *connector);
 
 struct analogix_dp_plat_data *analogix_dp_aux_to_plat_data(struct drm_dp_aux *aux);
 struct drm_dp_aux *analogix_dp_get_aux(struct analogix_dp_device *dp);
+int analogix_dp_finish_probe(struct analogix_dp_device *dp);
 
 #endif /* _ANALOGIX_DP_H_ */
-- 
2.34.1

[PATCH v9 11/15] drm/rockchip: analogix_dp: Apply analogix_dp_finish_probe()

[Damon Ding]

Apply analogix_dp_finish_probe() in order to move the panel/bridge
parsing from Rockchip side to the Analogix side.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

---

Changes in v4:
- Rename analogix_dp_find_panel_or_bridge() to
  analogix_dp_finish_probe().

Changes in v5:
- Remove DRM_DISPLAY_DP_AUX_BUS for ROCKCHIP_ANALOGIX_DP

Changes in v9:
- Add Tested-by tag.
---
 .../gpu/drm/rockchip/analogix_dp-rockchip.c   | 38 +------------------
 1 file changed, 2 insertions(+), 36 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 7fa17ba26c46..832e9766bef0 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -21,14 +21,12 @@
 #include <video/of_videomode.h>
 #include <video/videomode.h>
 
-#include <drm/display/drm_dp_aux_bus.h>
 #include <drm/display/drm_dp_helper.h>
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge_connector.h>
 #include <drm/bridge/analogix_dp.h>
 #include <drm/drm_of.h>
-#include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_simple_kms_helper.h>
@@ -417,24 +415,6 @@ static const struct component_ops rockchip_dp_component_ops = {
 	.unbind = rockchip_dp_unbind,
 };
 
-static int rockchip_dp_link_panel(struct drm_dp_aux *aux)
-{
-	struct analogix_dp_plat_data *plat_data = analogix_dp_aux_to_plat_data(aux);
-	struct rockchip_dp_device *dp = pdata_encoder_to_dp(plat_data);
-	int ret;
-
-	/*
-	 * If drm_of_find_panel_or_bridge() returns -ENODEV, there may be no valid panel
-	 * or bridge nodes. The driver should go on for the driver-free bridge or the DP
-	 * mode applications.
-	 */
-	ret = drm_of_find_panel_or_bridge(dp->dev->of_node, 1, 0, &plat_data->panel, NULL);
-	if (ret && ret != -ENODEV)
-		return ret;
-
-	return component_add(dp->dev, &rockchip_dp_component_ops);
-}
-
 static int rockchip_dp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -473,6 +453,7 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 	dp->plat_data.dev_type = dp->data->chip_type;
 	dp->plat_data.power_on = rockchip_dp_poweron;
 	dp->plat_data.power_off = rockchip_dp_powerdown;
+	dp->plat_data.ops = &rockchip_dp_component_ops;
 
 	ret = rockchip_dp_of_probe(dp);
 	if (ret < 0)
@@ -484,22 +465,7 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 	if (IS_ERR(dp->adp))
 		return PTR_ERR(dp->adp);
 
-	ret = devm_of_dp_aux_populate_bus(analogix_dp_get_aux(dp->adp), rockchip_dp_link_panel);
-	if (ret) {
-		/*
-		 * If devm_of_dp_aux_populate_bus() returns -ENODEV, the done_probing() will not
-		 * be called because there are no EP devices. Then the rockchip_dp_link_panel()
-		 * will be called directly in order to support the other valid DT configurations.
-		 *
-		 * NOTE: The devm_of_dp_aux_populate_bus() is allowed to return -EPROBE_DEFER.
-		 */
-		if (ret != -ENODEV)
-			return dev_err_probe(dp->dev, ret, "failed to populate aux bus\n");
-
-		return rockchip_dp_link_panel(analogix_dp_get_aux(dp->adp));
-	}
-
-	return 0;
+	return analogix_dp_finish_probe(dp->adp);
 }
 
 static void rockchip_dp_remove(struct platform_device *pdev)
-- 
2.34.1

[PATCH v9 12/15] drm/exynos: exynos_dp: Apply analogix_dp_finish_probe()

[Damon Ding]

Apply analogix_dp_finish_probe() in order to move the panel/bridge
parsing from Exynos side to the Analogix side.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

---

Changes in v4:
- Rename analogix_dp_find_panel_or_bridge() to
  analogix_dp_finish_probe().

Changes in v7:
- Remove exynos_dp_legacy_bridge_init() and inline API
  devm_drm_of_display_mode_bridge().
- If the panel or the next_bridge is parsed from DT, use ptr validity
  to check whether to call component_add() directly at the end of
  probing.

-Changes in v9:
- Add Tested-by tag.
---
 drivers/gpu/drm/exynos/exynos_dp.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 478eaa6f3175..6126820aad3b 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -157,9 +157,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np;
 	struct exynos_dp_device *dp;
-	struct drm_panel *panel;
-	struct drm_bridge *bridge;
-	int ret;
 
 	dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
 			  GFP_KERNEL);
@@ -186,30 +183,30 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, &bridge);
-	if (ret == -ENODEV) {
+	if (of_get_display_timings(dev->of_node)) {
 		dp->plat_data.next_bridge = devm_drm_of_display_mode_bridge(dp->dev,
 									dp->dev->of_node,
 									DRM_MODE_CONNECTOR_eDP);
-		ret = IS_ERR(dp->plat_data.next_bridge) ? PTR_ERR(dp->plat_data.next_bridge) : 0;
+		if (IS_ERR(dp->plat_data.next_bridge))
+			return PTR_ERR(dp->plat_data.next_bridge);
 	}
-	if (ret)
-		return ret;
 
 	/* The remote port can be either a panel or a bridge */
-	dp->plat_data.panel = panel;
-	dp->plat_data.next_bridge = bridge;
 	dp->plat_data.dev_type = EXYNOS_DP;
 	dp->plat_data.power_on = exynos_dp_poweron;
 	dp->plat_data.power_off = exynos_dp_poweroff;
 	dp->plat_data.attach = exynos_dp_bridge_attach;
+	dp->plat_data.ops = &exynos_dp_ops;
 
 out:
 	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
 	if (IS_ERR(dp->adp))
 		return PTR_ERR(dp->adp);
 
-	return component_add(&pdev->dev, &exynos_dp_ops);
+	if (dp->plat_data.panel || dp->plat_data.next_bridge)
+		return component_add(&pdev->dev, &exynos_dp_ops);
+	else
+		return analogix_dp_finish_probe(dp->adp);
 }
 
 static void exynos_dp_remove(struct platform_device *pdev)
-- 
2.34.1

[PATCH v9 13/15] drm/bridge: analogix_dp: Attach the next bridge in analogix_dp_bridge_attach()

[Damon Ding]

Uniformly, move the next bridge attachment to the Analogix side
rather than scattered on Rockchip and Exynos sides. It can also
help get rid of the callback &analogix_dp_plat_data.attach() and
make codes more concise.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

------

Changes in v6:
- Move the next bridge attachment to the Analogix side rather than
  scattered on Rockchip and Exynos sides.

Changes in v9:
- Add Tested-by tag.
---
 .../gpu/drm/bridge/analogix/analogix_dp_core.c |  7 ++++---
 drivers/gpu/drm/exynos/exynos_dp.c             | 18 ------------------
 include/drm/bridge/analogix_dp.h               |  1 -
 3 files changed, 4 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 933f1843777f..a6c5601e16ff 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -930,10 +930,11 @@ static int analogix_dp_bridge_attach(struct drm_bridge *bridge,
 		return -EINVAL;
 	}
 
-	if (dp->plat_data->attach) {
-		ret = dp->plat_data->attach(dp->plat_data, bridge);
+	if (dp->plat_data->next_bridge) {
+		ret = drm_bridge_attach(dp->encoder, dp->plat_data->next_bridge, bridge,
+					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 		if (ret) {
-			DRM_ERROR("Failed at platform attach func\n");
+			dev_err(dp->dev, "failed to attach following panel or bridge (%d)\n", ret);
 			return ret;
 		}
 	}
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 6126820aad3b..6884ea6d04eb 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -68,23 +68,6 @@ static int exynos_dp_poweroff(struct analogix_dp_plat_data *plat_data)
 	return exynos_dp_crtc_clock_enable(plat_data, false);
 }
 
-static int exynos_dp_bridge_attach(struct analogix_dp_plat_data *plat_data,
-				   struct drm_bridge *bridge)
-{
-	struct exynos_dp_device *dp = to_dp(plat_data);
-	int ret;
-
-	/* Pre-empt DP connector creation if there's a bridge */
-	if (plat_data->next_bridge) {
-		ret = drm_bridge_attach(&dp->encoder, plat_data->next_bridge, bridge,
-					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
 static void exynos_dp_mode_set(struct drm_encoder *encoder,
 			       struct drm_display_mode *mode,
 			       struct drm_display_mode *adjusted_mode)
@@ -195,7 +178,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	dp->plat_data.dev_type = EXYNOS_DP;
 	dp->plat_data.power_on = exynos_dp_poweron;
 	dp->plat_data.power_off = exynos_dp_poweroff;
-	dp->plat_data.attach = exynos_dp_bridge_attach;
 	dp->plat_data.ops = &exynos_dp_ops;
 
 out:
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index bae969dec63a..854af692229b 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -34,7 +34,6 @@ struct analogix_dp_plat_data {
 
 	int (*power_on)(struct analogix_dp_plat_data *);
 	int (*power_off)(struct analogix_dp_plat_data *);
-	int (*attach)(struct analogix_dp_plat_data *, struct drm_bridge *);
 };
 
 int analogix_dp_resume(struct analogix_dp_device *dp);
-- 
2.34.1

[PATCH v9 14/15] drm/bridge: analogix_dp: Remove bridge disabing and panel unpreparing in analogix_dp_unbind()

[Damon Ding]

The analogix_dp_unbind() should be balanced with analogix_dp_bind().
There are no bridge enabling and panel preparing in analogix_dp_bind(),
so it should be reasonable to remove the bridge disabing and panel
unpreparing in analogix_dp_unbind().

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

-----

Changes in v9:
- Add Tested-by tag.
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index a6c5601e16ff..7e3e9d4f4ea2 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1526,10 +1526,6 @@ EXPORT_SYMBOL_GPL(analogix_dp_bind);
 
 void analogix_dp_unbind(struct analogix_dp_device *dp)
 {
-	analogix_dp_bridge_disable(&dp->bridge);
-
-	drm_panel_unprepare(dp->plat_data->panel);
-
 	drm_dp_aux_unregister(&dp->aux);
 }
 EXPORT_SYMBOL_GPL(analogix_dp_unbind);
-- 
2.34.1

[PATCH v9 15/15] drm/bridge: analogix_dp: Apply panel_bridge helper

[Damon Ding]

In order to unify the handling of the panel and bridge, apply
panel_bridge helpers for Analogix DP driver. With this patch, the
bridge support will also become available.

The following changes have ben made:
- Apply plane_bridge helper to wrap the panel as the bridge.
- Remove the explicit panel APIs calls, which can be replaced with
  the automic bridge APIs calls wrapped by the panel.
- Remove the unnecessary analogix_dp_bridge_get_modes().

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

---

Changes in v4:
- Rename the &analogix_dp_plat_data.bridge to
  &analogix_dp_plat_data.next_bridge.

Changes in v5:
- Move panel_bridge addition a little forward.
- Move next_bridge attachment from Analogix side to Rockchip/Exynos
  side.

Changes in v6
- Remove the unnecessary analogix_dp_bridge_get_modes().
- Not to set DRM_BRIDGE_OP_MODES if the next is a panel.
- Squash [PATCH v5 15/17]drm/bridge: analogix_dp: Remove panel
  disabling and enabling in analogix_dp_set_bridge() into this
  commit.
- Fix the &drm_bridge->ops to DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT.

Changes in v9:
- Add Tested-by tag.
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 41 +++++--------------
 1 file changed, 11 insertions(+), 30 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 7e3e9d4f4ea2..d2ea93e1c9a3 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -749,9 +749,6 @@ static int analogix_dp_commit(struct analogix_dp_device *dp)
 {
 	int ret;
 
-	/* Keep the panel disabled while we configure video */
-	drm_panel_disable(dp->plat_data->panel);
-
 	ret = analogix_dp_train_link(dp);
 	if (ret) {
 		dev_err(dp->dev, "unable to do link train, ret=%d\n", ret);
@@ -771,9 +768,6 @@ static int analogix_dp_commit(struct analogix_dp_device *dp)
 		return ret;
 	}
 
-	/* Safe to enable the panel now */
-	drm_panel_enable(dp->plat_data->panel);
-
 	/* Check whether panel supports fast training */
 	ret = analogix_dp_fast_link_train_detection(dp);
 	if (ret)
@@ -858,17 +852,6 @@ static int analogix_dp_disable_psr(struct analogix_dp_device *dp)
 	return analogix_dp_send_psr_spd(dp, &psr_vsc, true);
 }
 
-static int analogix_dp_bridge_get_modes(struct drm_bridge *bridge, struct drm_connector *connector)
-{
-	struct analogix_dp_device *dp = to_dp(bridge);
-	int num_modes = 0;
-
-	if (dp->plat_data->panel)
-		num_modes += drm_panel_get_modes(dp->plat_data->panel, connector);
-
-	return num_modes;
-}
-
 static const struct drm_edid *analogix_dp_bridge_edid_read(struct drm_bridge *bridge,
 							   struct drm_connector *connector)
 {
@@ -909,7 +892,7 @@ analogix_dp_bridge_detect(struct drm_bridge *bridge, struct drm_connector *conne
 	struct analogix_dp_device *dp = to_dp(bridge);
 	enum drm_connector_status status = connector_status_disconnected;
 
-	if (dp->plat_data->panel || dp->plat_data->next_bridge)
+	if (dp->plat_data->next_bridge)
 		return connector_status_connected;
 
 	if (!analogix_dp_detect_hpd(dp))
@@ -995,8 +978,6 @@ static void analogix_dp_bridge_atomic_pre_enable(struct drm_bridge *bridge,
 	/* Don't touch the panel if we're coming back from PSR */
 	if (old_crtc_state && old_crtc_state->self_refresh_active)
 		return;
-
-	drm_panel_prepare(dp->plat_data->panel);
 }
 
 static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
@@ -1168,16 +1149,12 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
 	if (dp->dpms_mode != DRM_MODE_DPMS_ON)
 		return;
 
-	drm_panel_disable(dp->plat_data->panel);
-
 	disable_irq(dp->irq);
 
 	analogix_dp_set_analog_power_down(dp, POWER_ALL, 1);
 
 	pm_runtime_put_sync(dp->dev);
 
-	drm_panel_unprepare(dp->plat_data->panel);
-
 	dp->fast_train_enable = false;
 	dp->psr_supported = false;
 	dp->dpms_mode = DRM_MODE_DPMS_OFF;
@@ -1252,7 +1229,6 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
 	.atomic_post_disable = analogix_dp_bridge_atomic_post_disable,
 	.atomic_check = analogix_dp_bridge_atomic_check,
 	.attach = analogix_dp_bridge_attach,
-	.get_modes = analogix_dp_bridge_get_modes,
 	.edid_read = analogix_dp_bridge_edid_read,
 	.detect = analogix_dp_bridge_detect,
 };
@@ -1498,17 +1474,22 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
 		return ret;
 	}
 
-	if (dp->plat_data->panel)
-		bridge->ops = DRM_BRIDGE_OP_MODES | DRM_BRIDGE_OP_DETECT;
-	else
-		bridge->ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
-
+	bridge->ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
 	bridge->of_node = dp->dev->of_node;
 	bridge->type = DRM_MODE_CONNECTOR_eDP;
 	ret = devm_drm_bridge_add(dp->dev, &dp->bridge);
 	if (ret)
 		goto err_unregister_aux;
 
+	if (dp->plat_data->panel) {
+		dp->plat_data->next_bridge = devm_drm_panel_bridge_add(dp->dev,
+								       dp->plat_data->panel);
+		if (IS_ERR(dp->plat_data->next_bridge)) {
+			ret = PTR_ERR(bridge);
+			goto err_unregister_aux;
+		}
+	}
+
 	ret = drm_bridge_attach(dp->encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret) {
 		DRM_ERROR("failed to create bridge (%d)\n", ret);
-- 
2.34.1

Re: [PATCH v9 00/15] Apply drm_bridge_connector and panel_bridge helper for the Analogix DP driver

[Damon Ding]

On 2/10/2026 3:12 PM, Damon Ding wrote:
> Picked from:
> https://lore.kernel.org/all/20251217093321.3108939-1-damon.ding@rock-chips.com/
> 
> PATCH 1 is to add a new parameter to store the point of next bridge.
> PATCH 2 is to make legacy bridge driver more universal.
> PATCH 3-8 are preparations for apply drm_bridge_connector helper.
> PATCH 9 is to apply the drm_bridge_connector helper.
> PATCH 10-12 are to move the panel/bridge parsing to the Analogix side.
> PATCH 13 is to attach the next bridge on Analogix side uniformly.
> PATCH 14-15 are to apply the panel_bridge helper.
> 
> The following reviewed commits, which to make codes more concise, are
> rebased to the front of this patch series:
> 
> https://lore.kernel.org/all/20251110085823.1197472-1-damon.ding@rock-chips.com/
> https://lore.kernel.org/all/20251111022103.1350183-1-damon.ding@rock-chips.com/
> 
> Damon Ding (15):
>    drm/bridge: analogix_dp: Add &analogix_dp_plat_data.next_bridge
>    drm/bridge: Move legacy bridge driver out of imx directory for
>      multi-platform use
>    drm/exynos: exynos_dp: Remove &exynos_dp_device.ptn_bridge
>    drm/exynos: exynos_dp: Remove unused &exynos_dp_device.connector
>    drm/exynos: exynos_dp: Apply of-display-mode-bridge to parse the
>      display-timings node
>    drm/bridge: analogix_dp: Remove redundant
>      &analogix_dp_plat_data.skip_connector
>    drm/bridge: analogix_dp: Move the color format check to
>      .atomic_check() for Rockchip platforms
>    drm/bridge: analogix_dp: Remove unused
>      &analogix_dp_plat_data.get_modes()
>    drm/bridge: analogix_dp: Apply drm_bridge_connector helper
>    drm/bridge: analogix_dp: Add new API analogix_dp_finish_probe()
>    drm/rockchip: analogix_dp: Apply analogix_dp_finish_probe()
>    drm/exynos: exynos_dp: Apply analogix_dp_finish_probe()
>    drm/bridge: analogix_dp: Attach the next bridge in
>      analogix_dp_bridge_attach()
>    drm/bridge: analogix_dp: Remove bridge disabing and panel unpreparing
>      in analogix_dp_unbind()
>    drm/bridge: analogix_dp: Apply panel_bridge helper
> 
>   drivers/gpu/drm/bridge/Kconfig                |  10 +
>   drivers/gpu/drm/bridge/Makefile               |   1 +
>   drivers/gpu/drm/bridge/analogix/Kconfig       |   1 +
>   .../drm/bridge/analogix/analogix_dp_core.c    | 238 +++++++++---------
>   .../drm/bridge/analogix/analogix_dp_core.h    |   1 -
>   drivers/gpu/drm/bridge/imx/Kconfig            |  10 -
>   drivers/gpu/drm/bridge/imx/Makefile           |   1 -
>   .../gpu/drm/bridge/imx/imx-legacy-bridge.c    |  91 -------
>   .../gpu/drm/bridge/of-display-mode-bridge.c   |  93 +++++++
>   drivers/gpu/drm/exynos/Kconfig                |   2 +
>   drivers/gpu/drm/exynos/exynos_dp.c            | 110 ++------
>   drivers/gpu/drm/imx/ipuv3/Kconfig             |   4 +-
>   drivers/gpu/drm/imx/ipuv3/imx-ldb.c           |   6 +-
>   drivers/gpu/drm/imx/ipuv3/parallel-display.c  |   5 +-
>   drivers/gpu/drm/rockchip/Kconfig              |   1 +
>   .../gpu/drm/rockchip/analogix_dp-rockchip.c   |  67 +----
>   include/drm/bridge/analogix_dp.h              |   8 +-
>   include/drm/bridge/imx.h                      |  17 --
>   include/drm/bridge/of-display-mode-bridge.h   |  17 ++
>   19 files changed, 297 insertions(+), 386 deletions(-)
>   delete mode 100644 drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c
>   create mode 100644 drivers/gpu/drm/bridge/of-display-mode-bridge.c
>   delete mode 100644 include/drm/bridge/imx.h
>   create mode 100644 include/drm/bridge/of-display-mode-bridge.h
> 
> ---
> 
> Changes in v2:
> - Update Exynos DP driver synchronously.
> - Move the panel/bridge parsing to the Analogix side.
> 
> Changes in v3:
> - Rebase for the existing devm_drm_bridge_alloc() applying commit.
> - Fix the typographical error of panel/bridge check in exynos_dp_bind().
> - Squash all commits related to skip_connector deletion in both Exynos and
>    Analogix code into one.
> - Apply panel_bridge helper to make the codes more concise.
> - Fix the handing of bridge in analogix_dp_bridge_get_modes().
> - Remove unnecessary parameter struct drm_connector* for callback
>    &analogix_dp_plat_data.attach().
> - In order to decouple the connector driver and the bridge driver, move
>    the bridge connector initilization to the Rockchip and Exynos sides.
> 
> Changes in v4:
> - Rebase for the applied &drm_bridge_funcs.detect() modification commit.
> - Rename analogix_dp_find_panel_or_bridge() to analogix_dp_finish_probe().
> - Drop the drmm_encoder_init() modification commit.
> - Rename the &analogix_dp_plat_data.bridge to
>    &analogix_dp_plat_data.next_bridge.
> 
> Changes in v5:
> - Add legacy bridge to parse the display-timings node under the dp node
>    for Exynos side.
> - Move color format check to &drm_connector_helper_funcs.atomic_check()
>    in order to get rid of &analogix_dp_plat_data.get_modes().
> - Remove unused callback &analogix_dp_plat_data.get_modes().
> - Distinguish the &drm_bridge->ops of Analogix bridge based on whether
>    the downstream device is a panel, a bridge or neither.
> - Select DRM_DISPLAY_DP_AUX_BUS for DRM_ANALOGIX_DP, and remove it for
>    ROCKCHIP_ANALOGIX_DP.
> - Apply rockchip_dp_attach() to support the next bridge attachment for
>    the Rockchip side.
> - Move next_bridge attachment from Analogix side to Rockchip/Exynos sides.
> 
> Changes in v6:
> - Move legacy bridge driver out of imx directory for multi-platform use.
> - Apply DRM legacy bridge to parse display timings intead of implementing
>    the same codes only for Exynos DP.
> - Ensure last bridge determines EDID/modes detection capabilities in DRM
>    bridge_connector driver.
> - Remove unnecessary drm_bridge_get_modes() in
>    analogix_dp_bridge_get_modes().
> - Simplify analogix_dp_bridge_edid_read().
> - If the next is a bridge, set DRM_BRIDGE_OP_DETECT and return
>    connector_status_connected in analogix_dp_bridge_detect().
> - Set flag DRM_BRIDGE_ATTACH_NO_CONNECTOR for bridge attachment while
>    binding. Meanwhile, make DRM_BRIDGE_ATTACH_NO_CONNECTOR unsuppported
>    in analogix_dp_bridge_attach().
> - Move the next bridge attachment to the Analogix side rather than
>    scattered on Rockchip and Exynos sides.
> - Remove the unnecessary analogix_dp_bridge_get_modes().
> - Squash [PATCH v5 15/17] into [PATCH v5 17/17].
> - Fix the &drm_bridge->ops to DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT.
> 
> Changes in v7:
> - As Luca suggested, simplify the code and related comment for bridge_connector
>    modifications. Additionally, move the commit related to bridge_connector to
>    the top of this patch series.
> - Rename legacy-bridge driver to of-display-mode-bridge driver.
> - Remove unnecessary API drm_bridge_is_legacy() and apply a temporary flag
>    &exynos_dp_device.has_of_bridge instead, which will be removed finally.
> - Remove exynos_dp_legacy_bridge_init() and inline API
>    devm_drm_of_display_mode_bridge().
> 
> Changes in v8:
> - Adapt the related modifications to the newest bridge_connector driver.
> 
> Changes in v9:
> - Fix the Kconfig help text for CONFIG_DRM_OF_DISPLAY_MODE_BRIDGE.
> - Add Tested-by tag from Heiko.
> 

Gentle ping.

I think the patches are in good shape and ready for merging.

Best regards,
Damon

Re: [PATCH v9 02/15] drm/bridge: Move legacy bridge driver out of imx directory for multi-platform use

[Luca Ceresoli]

On Tue Feb 10, 2026 at 8:12 AM CET, Damon Ding wrote:
> As suggested by Dmitry, the DRM legacy bridge driver can be pulled
> out of imx/ subdir for multi-platform use. The driver is also renamed
> to make it more generic and suitable for platforms other than i.MX.
>
> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
> Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v9 05/15] drm/exynos: exynos_dp: Apply of-display-mode-bridge to parse the display-timings node

[Luca Ceresoli]

On Tue Feb 10, 2026 at 8:12 AM CET, Damon Ding wrote:
> If there is neither a panel nor a bridge, the display timing can be
> parsed from the display-timings node under the dp node.
>
> In order to get rid of &analogix_dp_plat_data.get_modes() and make
> the codes more consistent, apply DRM of-display-mode-bridge to parse
> display timings.
>
> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v9 06/15] drm/bridge: analogix_dp: Remove redundant &analogix_dp_plat_data.skip_connector

[Luca Ceresoli]

On Tue Feb 10, 2026 at 8:12 AM CET, Damon Ding wrote:
> The &analogix_dp_plat_data.skip_connector related check can be replaced
> by &analogix_dp_plat_data.bridge.
>
> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v9 08/15] drm/bridge: analogix_dp: Remove unused &analogix_dp_plat_data.get_modes()

[Luca Ceresoli]

On Tue Feb 10, 2026 at 8:12 AM CET, Damon Ding wrote:
> The callback &analogix_dp_plat_data.get_modes() is not implemented
> by either Rockchip side or Exynos side.
>
> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v9 09/15] drm/bridge: analogix_dp: Apply drm_bridge_connector helper

[Luca Ceresoli]

Hello Damon,

On Tue Feb 10, 2026 at 8:12 AM CET, Damon Ding wrote:
> Apply drm_bridge_connector helper for Analogix DP driver.
>
> The following changes have been made:
> - Apply drm_bridge_connector helper to get rid of &drm_connector_funcs
>   and &drm_connector_helper_funcs.
> - Remove unnecessary parameter struct drm_connector* for callback
>   &analogix_dp_plat_data.attach.
> - Remove &analogix_dp_device.connector.
> - Convert analogix_dp_atomic_check()/analogix_dp_detect() to
>   &drm_bridge_funcs.atomic_check()/&drm_bridge_funcs.detect().
> - Split analogix_dp_get_modes() into &drm_bridge_funcs.get_modes() and
>   &drm_bridge_funcs.edid_read().
> - Set flag DRM_BRIDGE_ATTACH_NO_CONNECTOR for bridge attachment while
>   binding. Meanwhile, make DRM_BRIDGE_ATTACH_NO_CONNECTOR unsuppported
                             ^

Do you mean "!DRM_BRIDGE_ATTACH_NO_CONNECTOR" here (i.e. missing '!')?

Also, unsuppported -> unsupported (typo)

>   in analogix_dp_bridge_attach().
> - Set &drm_bridge.ops according to different cases.
>
> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

I had a quick look, looks good overall, for the moment I have only a
question, see below.

I aim at reviewing this patch in depth, but it's not an easy one to
digest. Would it be feasible to split it in smaller logical steps? If it
is, please do, it would be very helpful for reviewing.

> @@ -1532,6 +1481,7 @@ EXPORT_SYMBOL_GPL(analogix_dp_resume);
>
>  int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
>  {
> +	struct drm_bridge *bridge = &dp->bridge;
>  	int ret;
>
>  	dp->drm_dev = drm_dev;
> @@ -1545,7 +1495,18 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
>  		return ret;
>  	}
>
> -	ret = drm_bridge_attach(dp->encoder, &dp->bridge, NULL, 0);
> +	if (dp->plat_data->panel)
> +		bridge->ops = DRM_BRIDGE_OP_MODES | DRM_BRIDGE_OP_DETECT;
> +	else
> +		bridge->ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
> +
> +	bridge->of_node = dp->dev->of_node;
> +	bridge->type = DRM_MODE_CONNECTOR_eDP;
> +	ret = devm_drm_bridge_add(dp->dev, &dp->bridge);

Can devm_drm_bridge_add() be added to analogix_dp_probe() instead?

> +	if (ret)
> +		goto err_unregister_aux;
> +
> +	ret = drm_bridge_attach(dp->encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
>  	if (ret) {
>  		DRM_ERROR("failed to create bridge (%d)\n", ret);
>  		goto err_unregister_aux;

Luca

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v9 10/15] drm/bridge: analogix_dp: Add new API analogix_dp_finish_probe()

[Luca Ceresoli]

Hello Damon,

On Tue Feb 10, 2026 at 8:12 AM CET, Damon Ding wrote:
> Since the panel/bridge should logically be positioned behind the
> Analogix bridge in the display pipeline, it makes sense to handle
> the panel/bridge parsing on the Analogix side. Therefore, we add
> a new API analogix_dp_finish_probe(), which combines the panel/bridge
> parsing with component addition, to do it.
>
> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

...

> @@ -1581,6 +1583,52 @@ struct drm_dp_aux *analogix_dp_get_aux(struct analogix_dp_device *dp)
>  }
>  EXPORT_SYMBOL_GPL(analogix_dp_get_aux);
>
> +static int analogix_dp_aux_done_probing(struct drm_dp_aux *aux)
> +{
> +	struct analogix_dp_device *dp = to_dp(aux);
> +	struct analogix_dp_plat_data *plat_data = dp->plat_data;
> +	int port = plat_data->dev_type == EXYNOS_DP ? 0 : 1;
> +	int ret;
> +
> +	/*
> +	 * If drm_of_find_panel_or_bridge() returns -ENODEV, there may be no valid panel
> +	 * or bridge nodes. The driver should go on for the driver-free bridge or the DP
> +	 * mode applications.
> +	 */
> +	ret = drm_of_find_panel_or_bridge(dp->dev->of_node, port, 0,
> +					  &plat_data->panel, &plat_data->next_bridge);
> +	if (ret && ret != -ENODEV)
> +		return ret;
> +
> +	return component_add(dp->dev, plat_data->ops);
> +}
> +
> +int analogix_dp_finish_probe(struct analogix_dp_device *dp)
> +{
> +	int ret;
> +
> +	ret = devm_of_dp_aux_populate_bus(&dp->aux, analogix_dp_aux_done_probing);
> +	if (ret) {
> +		/*
> +		 * If devm_of_dp_aux_populate_bus() returns -ENODEV, the done_probing() will
> +		 * not be called because there are no EP devices. Then the callback function
> +		 * analogix_dp_aux_done_probing() will be called directly in order to support
> +		 * the other valid DT configurations.
> +		 *
> +		 * NOTE: The devm_of_dp_aux_populate_bus() is allowed to return -EPROBE_DEFER.

Uhm, if it is allowed to return -EPROBE_DEFER...

> +		 */
> +		if (ret != -ENODEV) {
> +			dev_err(dp->dev, "failed to populate aux bus\n");
> +			return ret;
> +		}

...then you shouldn't dev_err() when -EPROBE_DEFER is returned.

Either use dev_err_probe() (which would also simplify your code) or check
for if (ret != -ENODEV && ret != -EPROBE_DEFER).

> +
> +		return analogix_dp_aux_done_probing(&dp->aux);
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(analogix_dp_finish_probe);
> +
>  MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
>  MODULE_DESCRIPTION("Analogix DP Core Driver");
>  MODULE_LICENSE("GPL v2");
> diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
> index 3428ffff24c5..bae969dec63a 100644
> --- a/include/drm/bridge/analogix_dp.h
> +++ b/include/drm/bridge/analogix_dp.h
> @@ -30,6 +30,7 @@ struct analogix_dp_plat_data {
>  	struct drm_bridge *next_bridge;
>  	struct drm_encoder *encoder;
>  	struct drm_connector *connector;
> +	const struct component_ops *ops;

Is adding a new stored field a good idea? Can it be instead passed as an
argument to analogix_dp_finish_probe()?

Note I don't have a strong opinion here, just the added struct field seems
overkill for being used just once.

> @@ -49,5 +50,6 @@ int analogix_dp_stop_crc(struct drm_connector *connector);
>
>  struct analogix_dp_plat_data *analogix_dp_aux_to_plat_data(struct drm_dp_aux *aux);
>  struct drm_dp_aux *analogix_dp_get_aux(struct analogix_dp_device *dp);
> +int analogix_dp_finish_probe(struct analogix_dp_device *dp);
>
>  #endif /* _ANALOGIX_DP_H_ */

Luca

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v9 09/15] drm/bridge: analogix_dp: Apply drm_bridge_connector helper

[Damon Ding]

Hi Luca,

On 3/3/2026 5:42 PM, Luca Ceresoli wrote:
> Hello Damon,
> 
> On Tue Feb 10, 2026 at 8:12 AM CET, Damon Ding wrote:
>> Apply drm_bridge_connector helper for Analogix DP driver.
>>
>> The following changes have been made:
>> - Apply drm_bridge_connector helper to get rid of &drm_connector_funcs
>>    and &drm_connector_helper_funcs.
>> - Remove unnecessary parameter struct drm_connector* for callback
>>    &analogix_dp_plat_data.attach.
>> - Remove &analogix_dp_device.connector.
>> - Convert analogix_dp_atomic_check()/analogix_dp_detect() to
>>    &drm_bridge_funcs.atomic_check()/&drm_bridge_funcs.detect().
>> - Split analogix_dp_get_modes() into &drm_bridge_funcs.get_modes() and
>>    &drm_bridge_funcs.edid_read().
>> - Set flag DRM_BRIDGE_ATTACH_NO_CONNECTOR for bridge attachment while
>>    binding. Meanwhile, make DRM_BRIDGE_ATTACH_NO_CONNECTOR unsuppported
>                               ^
> 
> Do you mean "!DRM_BRIDGE_ATTACH_NO_CONNECTOR" here (i.e. missing '!')?
> 
> Also, unsuppported -> unsupported (typo)
> 

Will fix in v10.

>>    in analogix_dp_bridge_attach().
>> - Set &drm_bridge.ops according to different cases.
>>
>> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
>> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)
> 
> I had a quick look, looks good overall, for the moment I have only a
> question, see below.
> 
> I aim at reviewing this patch in depth, but it's not an easy one to
> digest. Would it be feasible to split it in smaller logical steps? If it
> is, please do, it would be very helpful for reviewing.

Yes, this commit will be split into several smaller ones in v10.

> 
>> @@ -1532,6 +1481,7 @@ EXPORT_SYMBOL_GPL(analogix_dp_resume);
>>
>>   int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
>>   {
>> +	struct drm_bridge *bridge = &dp->bridge;
>>   	int ret;
>>
>>   	dp->drm_dev = drm_dev;
>> @@ -1545,7 +1495,18 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
>>   		return ret;
>>   	}
>>
>> -	ret = drm_bridge_attach(dp->encoder, &dp->bridge, NULL, 0);
>> +	if (dp->plat_data->panel)
>> +		bridge->ops = DRM_BRIDGE_OP_MODES | DRM_BRIDGE_OP_DETECT;
>> +	else
>> +		bridge->ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
>> +
>> +	bridge->of_node = dp->dev->of_node;
>> +	bridge->type = DRM_MODE_CONNECTOR_eDP;
>> +	ret = devm_drm_bridge_add(dp->dev, &dp->bridge);
> 
> Can devm_drm_bridge_add() be added to analogix_dp_probe() instead?

Will do in v10.

> 
>> +	if (ret)
>> +		goto err_unregister_aux;
>> +
>> +	ret = drm_bridge_attach(dp->encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
>>   	if (ret) {
>>   		DRM_ERROR("failed to create bridge (%d)\n", ret);
>>   		goto err_unregister_aux;

Best regards,
Damon

Re: [PATCH v9 10/15] drm/bridge: analogix_dp: Add new API analogix_dp_finish_probe()

[Damon Ding]

Hi Luca,

On 3/3/2026 5:54 PM, Luca Ceresoli wrote:
> Hello Damon,
> 
> On Tue Feb 10, 2026 at 8:12 AM CET, Damon Ding wrote:
>> Since the panel/bridge should logically be positioned behind the
>> Analogix bridge in the display pipeline, it makes sense to handle
>> the panel/bridge parsing on the Analogix side. Therefore, we add
>> a new API analogix_dp_finish_probe(), which combines the panel/bridge
>> parsing with component addition, to do it.
>>
>> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
>> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)
> 
> ...
> 
>> @@ -1581,6 +1583,52 @@ struct drm_dp_aux *analogix_dp_get_aux(struct analogix_dp_device *dp)
>>   }
>>   EXPORT_SYMBOL_GPL(analogix_dp_get_aux);
>>
>> +static int analogix_dp_aux_done_probing(struct drm_dp_aux *aux)
>> +{
>> +	struct analogix_dp_device *dp = to_dp(aux);
>> +	struct analogix_dp_plat_data *plat_data = dp->plat_data;
>> +	int port = plat_data->dev_type == EXYNOS_DP ? 0 : 1;
>> +	int ret;
>> +
>> +	/*
>> +	 * If drm_of_find_panel_or_bridge() returns -ENODEV, there may be no valid panel
>> +	 * or bridge nodes. The driver should go on for the driver-free bridge or the DP
>> +	 * mode applications.
>> +	 */
>> +	ret = drm_of_find_panel_or_bridge(dp->dev->of_node, port, 0,
>> +					  &plat_data->panel, &plat_data->next_bridge);
>> +	if (ret && ret != -ENODEV)
>> +		return ret;
>> +
>> +	return component_add(dp->dev, plat_data->ops);
>> +}
>> +
>> +int analogix_dp_finish_probe(struct analogix_dp_device *dp)
>> +{
>> +	int ret;
>> +
>> +	ret = devm_of_dp_aux_populate_bus(&dp->aux, analogix_dp_aux_done_probing);
>> +	if (ret) {
>> +		/*
>> +		 * If devm_of_dp_aux_populate_bus() returns -ENODEV, the done_probing() will
>> +		 * not be called because there are no EP devices. Then the callback function
>> +		 * analogix_dp_aux_done_probing() will be called directly in order to support
>> +		 * the other valid DT configurations.
>> +		 *
>> +		 * NOTE: The devm_of_dp_aux_populate_bus() is allowed to return -EPROBE_DEFER.
> 
> Uhm, if it is allowed to return -EPROBE_DEFER...
> 
>> +		 */
>> +		if (ret != -ENODEV) {
>> +			dev_err(dp->dev, "failed to populate aux bus\n");
>> +			return ret;
>> +		}
> 
> ...then you shouldn't dev_err() when -EPROBE_DEFER is returned.
> 
> Either use dev_err_probe() (which would also simplify your code) or check
> for if (ret != -ENODEV && ret != -EPROBE_DEFER).

Will fix in v10.

> 
>> +
>> +		return analogix_dp_aux_done_probing(&dp->aux);
>> +	}
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(analogix_dp_finish_probe);
>> +
>>   MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
>>   MODULE_DESCRIPTION("Analogix DP Core Driver");
>>   MODULE_LICENSE("GPL v2");
>> diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
>> index 3428ffff24c5..bae969dec63a 100644
>> --- a/include/drm/bridge/analogix_dp.h
>> +++ b/include/drm/bridge/analogix_dp.h
>> @@ -30,6 +30,7 @@ struct analogix_dp_plat_data {
>>   	struct drm_bridge *next_bridge;
>>   	struct drm_encoder *encoder;
>>   	struct drm_connector *connector;
>> +	const struct component_ops *ops;
> 
> Is adding a new stored field a good idea? Can it be instead passed as an
> argument to analogix_dp_finish_probe()?
> 
> Note I don't have a strong opinion here, just the added struct field seems
> overkill for being used just once.
> 

I agree this is a better approach, since the &component_ops is only used 
during probing.

>> @@ -49,5 +50,6 @@ int analogix_dp_stop_crc(struct drm_connector *connector);
>>
>>   struct analogix_dp_plat_data *analogix_dp_aux_to_plat_data(struct drm_dp_aux *aux);
>>   struct drm_dp_aux *analogix_dp_get_aux(struct analogix_dp_device *dp);
>> +int analogix_dp_finish_probe(struct analogix_dp_device *dp);
>>
>>   #endif /* _ANALOGIX_DP_H_ */
> 

Best regards,
Damon

Re: [PATCH v9 09/15] drm/bridge: analogix_dp: Apply drm_bridge_connector helper

[Damon Ding]

Hi Luca,

On 3/9/2026 7:25 PM, Damon Ding wrote:
> Hi Luca,
> 
> On 3/3/2026 5:42 PM, Luca Ceresoli wrote:
>> Hello Damon,
>>
>> On Tue Feb 10, 2026 at 8:12 AM CET, Damon Ding wrote:
>>> Apply drm_bridge_connector helper for Analogix DP driver.
>>>
>>> The following changes have been made:
>>> - Apply drm_bridge_connector helper to get rid of &drm_connector_funcs
>>>    and &drm_connector_helper_funcs.
>>> - Remove unnecessary parameter struct drm_connector* for callback
>>>    &analogix_dp_plat_data.attach.
>>> - Remove &analogix_dp_device.connector.
>>> - Convert analogix_dp_atomic_check()/analogix_dp_detect() to
>>>    &drm_bridge_funcs.atomic_check()/&drm_bridge_funcs.detect().
>>> - Split analogix_dp_get_modes() into &drm_bridge_funcs.get_modes() and
>>>    &drm_bridge_funcs.edid_read().
>>> - Set flag DRM_BRIDGE_ATTACH_NO_CONNECTOR for bridge attachment while
>>>    binding. Meanwhile, make DRM_BRIDGE_ATTACH_NO_CONNECTOR unsuppported
>>                               ^
>>
>> Do you mean "!DRM_BRIDGE_ATTACH_NO_CONNECTOR" here (i.e. missing '!')?
>>
>> Also, unsuppported -> unsupported (typo)
>>
> 
> Will fix in v10.
> 
>>>    in analogix_dp_bridge_attach().
>>> - Set &drm_bridge.ops according to different cases.
>>>
>>> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
>>> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
>>> Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)
>>
>> I had a quick look, looks good overall, for the moment I have only a
>> question, see below.
>>
>> I aim at reviewing this patch in depth, but it's not an easy one to
>> digest. Would it be feasible to split it in smaller logical steps? If it
>> is, please do, it would be very helpful for reviewing.
> 
> Yes, this commit will be split into several smaller ones in v10.
> 
>>
>>> @@ -1532,6 +1481,7 @@ EXPORT_SYMBOL_GPL(analogix_dp_resume);
>>>
>>>   int analogix_dp_bind(struct analogix_dp_device *dp, struct 
>>> drm_device *drm_dev)
>>>   {
>>> +    struct drm_bridge *bridge = &dp->bridge;
>>>       int ret;
>>>
>>>       dp->drm_dev = drm_dev;
>>> @@ -1545,7 +1495,18 @@ int analogix_dp_bind(struct analogix_dp_device 
>>> *dp, struct drm_device *drm_dev)
>>>           return ret;
>>>       }
>>>
>>> -    ret = drm_bridge_attach(dp->encoder, &dp->bridge, NULL, 0);
>>> +    if (dp->plat_data->panel)
>>> +        bridge->ops = DRM_BRIDGE_OP_MODES | DRM_BRIDGE_OP_DETECT;
>>> +    else
>>> +        bridge->ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
>>> +
>>> +    bridge->of_node = dp->dev->of_node;
>>> +    bridge->type = DRM_MODE_CONNECTOR_eDP;
>>> +    ret = devm_drm_bridge_add(dp->dev, &dp->bridge);
>>
>> Can devm_drm_bridge_add() be added to analogix_dp_probe() instead?
> 
> Will do in v10.

My apologies for my somewhat irresponsible reply earlier!

When I was splitting this commit, I realized that moving 
devm_drm_bridge_add() to analogix_dp_probe() is actually not feasible – 
the type of the downstream bridge of the Analogix bridge can only be 
determined after the entire probe process is fully completed.

rockchip_dp_probe()/exynos_dp_probe() ->
   analogix_dp_finish_probe() ->
     analogix_dp_aux_done_probing() ->
       drm_of_find_panel_or_bridge() ->
         rockchip_dp_bind()/exynos_dp_bind() ->
           analogix_dp_bind()->
             devm_drm_bridge_add()

To avoid confusion, I’ve added some comments for this easily 
misunderstood logic to the commit message of v10, so the reasoning is 
clear for everyone.

> 
>>
>>> +    if (ret)
>>> +        goto err_unregister_aux;
>>> +
>>> +    ret = drm_bridge_attach(dp->encoder, bridge, NULL, 
>>> DRM_BRIDGE_ATTACH_NO_CONNECTOR);
>>>       if (ret) {
>>>           DRM_ERROR("failed to create bridge (%d)\n", ret);
>>>           goto err_unregister_aux;
> 

Best regards,
Damon

Re: [PATCH v9 10/15] drm/bridge: analogix_dp: Add new API analogix_dp_finish_probe()

[Damon Ding]

Hi Luca,

On 3/9/2026 7:51 PM, Damon Ding wrote:
> Hi Luca,
> 
> On 3/3/2026 5:54 PM, Luca Ceresoli wrote:
>> Hello Damon,
>>
>> On Tue Feb 10, 2026 at 8:12 AM CET, Damon Ding wrote:
>>> Since the panel/bridge should logically be positioned behind the
>>> Analogix bridge in the display pipeline, it makes sense to handle
>>> the panel/bridge parsing on the Analogix side. Therefore, we add
>>> a new API analogix_dp_finish_probe(), which combines the panel/bridge
>>> parsing with component addition, to do it.
>>>
>>> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
>>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
>>> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
>>> Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)
>>
>> ...
>>
>>> @@ -1581,6 +1583,52 @@ struct drm_dp_aux *analogix_dp_get_aux(struct 
>>> analogix_dp_device *dp)
>>>   }
>>>   EXPORT_SYMBOL_GPL(analogix_dp_get_aux);
>>>
>>> +static int analogix_dp_aux_done_probing(struct drm_dp_aux *aux)
>>> +{
>>> +    struct analogix_dp_device *dp = to_dp(aux);
>>> +    struct analogix_dp_plat_data *plat_data = dp->plat_data;
>>> +    int port = plat_data->dev_type == EXYNOS_DP ? 0 : 1;
>>> +    int ret;
>>> +
>>> +    /*
>>> +     * If drm_of_find_panel_or_bridge() returns -ENODEV, there may 
>>> be no valid panel
>>> +     * or bridge nodes. The driver should go on for the driver-free 
>>> bridge or the DP
>>> +     * mode applications.
>>> +     */
>>> +    ret = drm_of_find_panel_or_bridge(dp->dev->of_node, port, 0,
>>> +                      &plat_data->panel, &plat_data->next_bridge);
>>> +    if (ret && ret != -ENODEV)
>>> +        return ret;
>>> +
>>> +    return component_add(dp->dev, plat_data->ops);
>>> +}
>>> +
>>> +int analogix_dp_finish_probe(struct analogix_dp_device *dp)
>>> +{
>>> +    int ret;
>>> +
>>> +    ret = devm_of_dp_aux_populate_bus(&dp->aux, 
>>> analogix_dp_aux_done_probing);
>>> +    if (ret) {
>>> +        /*
>>> +         * If devm_of_dp_aux_populate_bus() returns -ENODEV, the 
>>> done_probing() will
>>> +         * not be called because there are no EP devices. Then the 
>>> callback function
>>> +         * analogix_dp_aux_done_probing() will be called directly in 
>>> order to support
>>> +         * the other valid DT configurations.
>>> +         *
>>> +         * NOTE: The devm_of_dp_aux_populate_bus() is allowed to 
>>> return -EPROBE_DEFER.
>>
>> Uhm, if it is allowed to return -EPROBE_DEFER...
>>
>>> +         */
>>> +        if (ret != -ENODEV) {
>>> +            dev_err(dp->dev, "failed to populate aux bus\n");
>>> +            return ret;
>>> +        }
>>
>> ...then you shouldn't dev_err() when -EPROBE_DEFER is returned.
>>
>> Either use dev_err_probe() (which would also simplify your code) or check
>> for if (ret != -ENODEV && ret != -EPROBE_DEFER).
> 
> Will fix in v10.
> 
>>
>>> +
>>> +        return analogix_dp_aux_done_probing(&dp->aux);
>>> +    }
>>> +
>>> +    return 0;
>>> +}
>>> +EXPORT_SYMBOL_GPL(analogix_dp_finish_probe);
>>> +
>>>   MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
>>>   MODULE_DESCRIPTION("Analogix DP Core Driver");
>>>   MODULE_LICENSE("GPL v2");
>>> diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/ 
>>> analogix_dp.h
>>> index 3428ffff24c5..bae969dec63a 100644
>>> --- a/include/drm/bridge/analogix_dp.h
>>> +++ b/include/drm/bridge/analogix_dp.h
>>> @@ -30,6 +30,7 @@ struct analogix_dp_plat_data {
>>>       struct drm_bridge *next_bridge;
>>>       struct drm_encoder *encoder;
>>>       struct drm_connector *connector;
>>> +    const struct component_ops *ops;
>>
>> Is adding a new stored field a good idea? Can it be instead passed as an
>> argument to analogix_dp_finish_probe()?
>>
>> Note I don't have a strong opinion here, just the added struct field 
>> seems
>> overkill for being used just once.
>>
> 
> I agree this is a better approach, since the &component_ops is only used 
> during probing.

Sorry for another shamefully incorrect reply!

The &dp_aux_ep_device_with_data.done_probing only supports passing the 
&drm_dp_aux parameter, meaning we can't directly pass &component_ops.

I'll also add extra context to the commit msg – similar to what I did 
for v9 patch 9/15 – so everyone understands why this change was made and 
avoids confusion.

> 
>>> @@ -49,5 +50,6 @@ int analogix_dp_stop_crc(struct drm_connector 
>>> *connector);
>>>
>>>   struct analogix_dp_plat_data *analogix_dp_aux_to_plat_data(struct 
>>> drm_dp_aux *aux);
>>>   struct drm_dp_aux *analogix_dp_get_aux(struct analogix_dp_device *dp);
>>> +int analogix_dp_finish_probe(struct analogix_dp_device *dp);
>>>
>>>   #endif /* _ANALOGIX_DP_H_ */
>>
> 

Best regards,
Damon