Re: [PATCH 1/8] gpu: nova-core: convert PMC registers to kernel register macro

["Eliot Courtney" <ecourtney@nvidia.com>]

On Wed Mar 18, 2026 at 5:05 PM JST, Alexandre Courbot wrote:
> Convert all PMC registers to use the kernel's register macro and update
> the code accordingly.
>
> nova-core's registers have some constant properties (like a 32-bit size
> and a crate visibility), so introduce the `nv_reg` macro to shorten
> their declaration.
>
> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
> ---
>  drivers/gpu/nova-core/falcon.rs |  7 ++--
>  drivers/gpu/nova-core/gpu.rs    | 37 ++++++++++-----------
>  drivers/gpu/nova-core/regs.rs   | 73 +++++++++++++++++++++++++++++++----------
>  3 files changed, 78 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/gpu/nova-core/falcon.rs b/drivers/gpu/nova-core/falcon.rs
> index 7097a206ec3c..4721865f59d9 100644
> --- a/drivers/gpu/nova-core/falcon.rs
> +++ b/drivers/gpu/nova-core/falcon.rs
> @@ -13,7 +13,10 @@
>          DmaAddress,
>          DmaMask, //
>      },
> -    io::poll::read_poll_timeout,
> +    io::{
> +        poll::read_poll_timeout, //
> +        Io,
> +    },

nit: // should be on the last import?

>      prelude::*,
>      sync::aref::ARef,
>      time::Delta,
> @@ -532,7 +535,7 @@ pub(crate) fn reset(&self, bar: &Bar0) -> Result {
>          self.hal.reset_wait_mem_scrubbing(bar)?;
>  
>          regs::NV_PFALCON_FALCON_RM::default()
> -            .set_value(regs::NV_PMC_BOOT_0::read(bar).into())
> +            .set_value(bar.read(regs::NV_PMC_BOOT_0).into())
>              .write(bar, &E::ID);
>  
>          Ok(())
> diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
> index 8579d632e717..d81abc7de3d7 100644
> --- a/drivers/gpu/nova-core/gpu.rs
> +++ b/drivers/gpu/nova-core/gpu.rs
> @@ -4,6 +4,8 @@
>      device,
>      devres::Devres,
>      fmt,
> +    io::Io,
> +    num::Bounded,
>      pci,
>      prelude::*,
>      sync::Arc, //
> @@ -129,24 +131,18 @@ fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
>  }
>  
>  /// Enum representation of the GPU generation.
> -///
> -/// TODO: remove the `Default` trait implementation, and the `#[default]`
> -/// attribute, once the register!() macro (which creates Architecture items) no
> -/// longer requires it for read-only fields.
> -#[derive(fmt::Debug, Default, Copy, Clone)]
> -#[repr(u8)]
> +#[derive(fmt::Debug, Copy, Clone)]
>  pub(crate) enum Architecture {
> -    #[default]
>      Turing = 0x16,
>      Ampere = 0x17,
>      Ada = 0x19,
>  }
>  
> -impl TryFrom<u8> for Architecture {
> +impl TryFrom<Bounded<u32, 6>> for Architecture {
>      type Error = Error;
>  
> -    fn try_from(value: u8) -> Result<Self> {
> -        match value {
> +    fn try_from(value: Bounded<u32, 6>) -> Result<Self> {
> +        match u8::from(value) {
>              0x16 => Ok(Self::Turing),
>              0x17 => Ok(Self::Ampere),
>              0x19 => Ok(Self::Ada),
> @@ -155,23 +151,26 @@ fn try_from(value: u8) -> Result<Self> {
>      }
>  }
>  
> -impl From<Architecture> for u8 {
> +impl From<Architecture> for Bounded<u32, 6> {
>      fn from(value: Architecture) -> Self {
> -        // CAST: `Architecture` is `repr(u8)`, so this cast is always lossless.
> -        value as u8
> +        match value {
> +            Architecture::Turing => Bounded::<u32, 6>::new::<0x16>(),
> +            Architecture::Ampere => Bounded::<u32, 6>::new::<0x17>(),
> +            Architecture::Ada => Bounded::<u32, 6>::new::<0x19>(),
> +        }
>      }
>  }
>  
>  pub(crate) struct Revision {
> -    major: u8,
> -    minor: u8,
> +    major: Bounded<u8, 4>,
> +    minor: Bounded<u8, 4>,
>  }
>  
>  impl From<regs::NV_PMC_BOOT_42> for Revision {
>      fn from(boot0: regs::NV_PMC_BOOT_42) -> Self {
>          Self {
> -            major: boot0.major_revision(),
> -            minor: boot0.minor_revision(),
> +            major: boot0.major_revision().cast(),
> +            minor: boot0.minor_revision().cast(),
>          }
>      }
>  }
> @@ -208,13 +207,13 @@ fn new(dev: &device::Device, bar: &Bar0) -> Result<Spec> {
>          //     from an earlier (pre-Fermi) era, and then using boot42 to precisely identify the GPU.
>          //     Somewhere in the Rubin timeframe, boot0 will no longer have space to add new GPU IDs.
>  
> -        let boot0 = regs::NV_PMC_BOOT_0::read(bar);
> +        let boot0 = bar.read(regs::NV_PMC_BOOT_0);
>  
>          if boot0.is_older_than_fermi() {
>              return Err(ENODEV);
>          }
>  
> -        let boot42 = regs::NV_PMC_BOOT_42::read(bar);
> +        let boot42 = bar.read(regs::NV_PMC_BOOT_42);
>          Spec::try_from(boot42).inspect_err(|_| {
>              dev_err!(dev, "Unsupported chipset: {}\n", boot42);
>          })
> diff --git a/drivers/gpu/nova-core/regs.rs b/drivers/gpu/nova-core/regs.rs
> index 53f412f0ca32..62c2065e63ef 100644
> --- a/drivers/gpu/nova-core/regs.rs
> +++ b/drivers/gpu/nova-core/regs.rs
> @@ -35,20 +35,64 @@
>      num::FromSafeCast,
>  };
>  
> +// All nova-core registers are 32-bit and `pub(crate)`. Wrap the `register!` macro to avoid
> +// repeating this information for every register.
> +macro_rules! nv_reg {
> +    (
> +        $(
> +            $(#[$attr:meta])* $name:ident $([ $size:expr $(, stride = $stride:expr)? ])?
> +                $(@ $offset:literal)?
> +                $(@ $base:ident + $base_offset:literal)?
> +                $(=> $alias:ident $(+ $alias_offset:ident)? $([$alias_idx:expr])? )?
> +            $(, $comment:literal)? { $($fields:tt)* }
> +        )*
> +    )=> {
> +        $(
> +        ::kernel::io::register!(
> +            @reg $(#[$attr])* pub(crate) $name(u32) $([$size $(, stride = $stride)?])?
> +                $(@ $offset)?
> +                $(@ $base + $base_offset)?
> +                $(=> $alias $(+ $alias_offset)? $([$alias_idx])? )?
> +            $(, $comment)? { $($fields)* }
> +        );
> +        )*
> +    };
> +}
> +

Is it really worth introducing this macro to save pub(crate) and (u32)?
Are we definitely going to always be using pub(crate) and u32?