From: "Petr Vandrovec" <VANDROVE@vc.cvut.cz>
To: Jon Smirl <jonsmirl@yahoo.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] add PCI ROMs to sysfs
Date: Wed, 4 Aug 2004 17:57:41 +0200 [thread overview]
Message-ID: <E12D1EA555A@vcnet.vc.cvut.cz> (raw)
On 3 Aug 04 at 23:08, Jon Smirl wrote:
> + unsigned long start;
> + loff_t i, size;
> + char direct_access = dev->rom_info.rom ? 0 : 1;
> + unsigned char *rom = NULL;
What about using 'rom' variable for non-direct access too?
unsigned char *rom = dev->rom_info.rom;
char direct_access = rom == NULL;
> + struct resource *r = &dev->resource[PCI_ROM_RESOURCE];
> +
> + if (off > size)
You can do 'if (off >= size) ...' And well, where is size assigned at
all?
> + return 0;
> +
> + if (direct_access) {
> + /* assign the ROM an address if it doesn't have one */
> + if (r->parent == NULL)
> + pci_assign_resource(dev, PCI_ROM_RESOURCE);
> + /* Enable ROM space decodes and do the reads */
> + pci_enable_rom(dev);
> + start = pci_resource_start(dev, PCI_ROM_RESOURCE);
> + size = pci_resource_len(dev, PCI_ROM_RESOURCE);
> + rom = ioremap(start, size);
Test for failure? Test for no ROM devices?
> +
> + printk("read_rom start %lx size %x\n", start, size);
> + printk("rom bytes %02x %02x\n", rom, rom + 1);
readb(rom), readb(rom+1)?
> + }
> + if (off + count > size) {
Is off + count guaranteed to not overflow?
> + size -= off;
> + count = size;
> + } else
> + size = count;
> +
> + i = 0;
> + while (size > 0) {
> + unsigned char val;
> + if (direct_access)
> + val = readb(rom + off);
Please read it with readl. At least on my Matrox G550 reading 64KB ROM with
byte accesses takes 1334ms, with 16bit accesses 840ms and with
32bit (or 64bit MMX) accesses 551ms. Straight (non-IO aware) memcpy
takes 535ms. And put some conditional_schedule()s here, 550ms (or even
34ms for 4KB chunk) is IMHO too long.
> + else
> + val = *(dev->rom_info.rom + off);
If you made changes suggested at the beginning, you can do this instead:
val = rom[off];
Best regards,
Petr Vandrovec
next reply other threads:[~2004-08-04 15:58 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-04 15:57 Petr Vandrovec [this message]
2004-08-04 17:06 ` [PATCH] add PCI ROMs to sysfs Jesse Barnes
2004-08-05 1:38 ` Jon Smirl
-- strict thread matches above, loose matches on Subject: below --
2004-09-08 3:15 Jon Smirl
2004-09-08 6:07 ` Greg KH
2004-09-08 23:50 ` Greg KH
2004-10-08 2:20 ` Jon Smirl
2004-11-05 23:06 ` Greg KH
2004-09-03 1:40 Jon Smirl
2004-09-03 17:27 ` Jesse Barnes
2004-09-03 17:45 ` Jesse Barnes
2004-09-03 18:06 ` Jesse Barnes
2004-08-29 4:58 Jon Smirl
2004-08-12 8:39 Thomas Winischhofer
2004-08-11 23:27 Pallipadi, Venkatesh
2004-08-12 0:22 ` Jon Smirl
2004-08-12 2:22 ` Jon Smirl
2004-08-13 18:17 ` Martin Mares
2004-08-14 5:34 ` Jon Smirl
2004-08-14 9:47 ` Martin Mares
2004-08-14 14:17 ` Jon Smirl
2004-08-14 22:10 ` Martin Mares
2004-08-14 23:39 ` Jon Smirl
2004-08-18 18:13 ` Jon Smirl
2004-08-18 18:37 ` Jesse Barnes
2004-08-23 22:51 ` Greg KH
2004-08-25 17:32 ` Jon Smirl
2004-08-25 17:42 ` Greg KH
2004-08-25 18:06 ` Jon Smirl
2004-08-25 18:19 ` Greg KH
2004-08-25 18:45 ` Jon Smirl
2004-08-25 18:55 ` Greg KH
2004-08-25 20:06 ` Jon Smirl
2004-08-26 13:13 ` Matthew Wilcox
2004-08-26 15:40 ` Jon Smirl
2004-08-26 15:58 ` Matthew Wilcox
2004-08-26 19:54 ` Jon Smirl
2004-08-28 16:15 ` Matthew Wilcox
2004-08-28 17:33 ` Jon Smirl
2004-08-28 17:38 ` Jon Smirl
2004-08-27 16:43 ` Matthew Wilcox
2004-08-27 22:29 ` Jon Smirl
2004-08-28 16:35 ` Matthew Wilcox
2004-08-28 21:53 ` Grant Grundler
2004-08-25 18:29 ` Matthew Wilcox
2004-08-19 12:51 ` Alan Cox
2004-08-19 23:00 ` Jon Smirl
2004-08-19 14:01 ` Martin Mares
2004-08-19 23:11 ` Jon Smirl
2004-08-20 10:26 ` Martin Mares
2004-08-25 15:36 ` Matthew Wilcox
2004-08-25 15:50 ` Jon Smirl
2004-07-30 21:09 Jesse Barnes
2004-07-30 21:29 ` Greg KH
2004-07-30 21:34 ` Jesse Barnes
2004-07-30 21:39 ` Greg KH
2004-07-30 21:48 ` Jesse Barnes
2004-07-30 22:15 ` Jon Smirl
2004-07-31 15:59 ` Jesse Barnes
2004-08-02 17:02 ` Jesse Barnes
2004-08-02 17:29 ` Jon Smirl
2004-08-02 21:00 ` Jon Smirl
2004-08-02 21:05 ` Jesse Barnes
2004-08-02 23:32 ` Alan Cox
2004-08-02 23:30 ` Alan Cox
2004-08-03 2:03 ` Jesse Barnes
2004-08-03 2:32 ` Jon Smirl
2004-08-03 17:07 ` Jesse Barnes
2004-08-03 21:19 ` Jon Smirl
2004-08-03 21:28 ` Jesse Barnes
2004-08-03 21:30 ` Jesse Barnes
2004-08-03 21:31 ` Martin Mares
2004-08-03 21:36 ` Jon Smirl
2004-08-03 21:39 ` Martin Mares
2004-08-05 5:05 ` Jon Smirl
2004-08-05 5:41 ` Benjamin Herrenschmidt
2004-08-05 11:53 ` Jon Smirl
2004-08-05 15:54 ` Jesse Barnes
2004-08-05 16:25 ` Jesse Barnes
2004-08-05 20:45 ` Jon Smirl
2004-08-05 21:12 ` Jesse Barnes
2004-08-06 21:14 ` Jon Smirl
2004-08-06 22:33 ` Jesse Barnes
2004-08-11 17:04 ` Jesse Barnes
2004-08-11 17:28 ` Greg KH
2004-08-11 18:02 ` Jesse Barnes
2004-08-11 18:12 ` Greg KH
2004-08-12 1:28 ` Marcelo Tosatti
2004-08-12 14:38 ` Jesse Barnes
2004-08-12 17:29 ` Greg KH
2004-08-12 2:25 ` Miles Bader
2004-08-12 4:38 ` Greg KH
2004-08-12 9:18 ` Geert Uytterhoeven
2004-08-12 22:01 ` Matthew Wilcox
2004-08-11 19:24 ` Jon Smirl
2004-08-11 19:44 ` Jesse Barnes
2004-08-11 20:11 ` Alan Cox
2004-08-11 23:31 ` Jon Smirl
2004-08-12 11:51 ` Alan Cox
2004-08-12 20:28 ` Jon Smirl
2004-08-12 0:45 ` Jon Smirl
2004-08-12 4:37 ` Greg KH
2004-08-04 6:08 ` Jon Smirl
2004-08-04 15:56 ` Jesse Barnes
2004-07-30 21:53 ` Jon Smirl
2004-07-31 10:03 ` Vojtech Pavlik
2004-07-31 13:28 ` Jon Smirl
2004-07-31 15:42 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E12D1EA555A@vcnet.vc.cvut.cz \
--to=vandrove@vc.cvut.cz \
--cc=jonsmirl@yahoo.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox