* 2.5.2-pre1 oddness under X @ 2001-12-22 21:46 really mason_at_soo_dot_com 2001-12-22 22:24 ` Pierre Rousselet 0 siblings, 1 reply; 12+ messages in thread From: really mason_at_soo_dot_com @ 2001-12-22 21:46 UTC (permalink / raw) To: linux-kernel Running kernel 2.5.2-pre1 compiled with gcc 3.0.3, i get the following error irregularly when starting X or trying to compile sawfish in an xterm: Inconsistency detected by ld.so: dynamic-link.h: 62: elf_get_dynamic_info: Assertion `! "bad dynamic tag"' failed! Have no idea what it means, and it doesn't happen under any earlier 2.5.X kernels using the same compiler. Am also using binutils-2.11.2 and glibc-2.2.4. b <mason_at_soo_dot_com> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.5.2-pre1 oddness under X 2001-12-22 21:46 2.5.2-pre1 oddness under X really mason_at_soo_dot_com @ 2001-12-22 22:24 ` Pierre Rousselet 2001-12-23 14:11 ` Jens Axboe 0 siblings, 1 reply; 12+ messages in thread From: Pierre Rousselet @ 2001-12-22 22:24 UTC (permalink / raw) To: really mason_at_soo_dot_com; +Cc: linux-kernel really mason_at_soo_dot_com wrote: > Running kernel 2.5.2-pre1 compiled with gcc 3.0.3, > i get the following error irregularly when starting > X or trying to compile sawfish in an xterm: > > Inconsistency detected by ld.so: dynamic-link.h: 62: elf_get_dynamic_info: Assertion `! "bad dynamic tag"' failed! I've also seen sawfish seg-faulting at the first try of 2.5.2-pre1. > Have no idea what it means, and it doesn't happen > under any earlier 2.5.X kernels using the same > compiler. > > Am also using binutils-2.11.2 and glibc-2.2.4. The same here (but gcc-2.95.3). I re-compiled sawfish, while running 2.4.17, with 2.4.17 headers in /usr/include/asm and /usr/include/linux and it works again. Pierre -- ------------------------------------------------ Pierre Rousselet <pierre.rousselet@wanadoo.fr> ------------------------------------------------ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.5.2-pre1 oddness under X 2001-12-22 22:24 ` Pierre Rousselet @ 2001-12-23 14:11 ` Jens Axboe 2001-12-23 17:08 ` really mason_at_soo_dot_com 0 siblings, 1 reply; 12+ messages in thread From: Jens Axboe @ 2001-12-23 14:11 UTC (permalink / raw) To: Pierre Rousselet; +Cc: really mason_at_soo_dot_com, linux-kernel On Sat, Dec 22 2001, Pierre Rousselet wrote: > really mason_at_soo_dot_com wrote: > > >Running kernel 2.5.2-pre1 compiled with gcc 3.0.3, > >i get the following error irregularly when starting > >X or trying to compile sawfish in an xterm: > > > >Inconsistency detected by ld.so: dynamic-link.h: 62: elf_get_dynamic_info: > >Assertion `! "bad dynamic tag"' failed! > > > I've also seen sawfish seg-faulting at the first try of 2.5.2-pre1. This sounds like disk corruption, it may be that the -pre1 changes are partially broken. I'll go take a look. IDE? -- Jens Axboe ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.5.2-pre1 oddness under X 2001-12-23 14:11 ` Jens Axboe @ 2001-12-23 17:08 ` really mason_at_soo_dot_com 2001-12-23 19:42 ` Vojtech Pavlik 2001-12-23 20:37 ` Ryan Cumming 0 siblings, 2 replies; 12+ messages in thread From: really mason_at_soo_dot_com @ 2001-12-23 17:08 UTC (permalink / raw) To: linux-kernel Yikes, hope not. But yeps, i'm using IDE drives, ATA100 master and ATA66 slave. It's a VIA vt8233 south bridge. i also have the FSB overclocked so the PCI bus is running at 37mhz. That's caused no trouble so far. b On Sun, Dec 23, 2001 at 03:11:47PM +0100, Jens Axboe wrote: > This sounds like disk corruption, it may be that the -pre1 changes are > partially broken. > > I'll go take a look. IDE? ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.5.2-pre1 oddness under X 2001-12-23 17:08 ` really mason_at_soo_dot_com @ 2001-12-23 19:42 ` Vojtech Pavlik 2001-12-23 19:48 ` really mason_at_soo_dot_com 2001-12-23 20:37 ` Ryan Cumming 1 sibling, 1 reply; 12+ messages in thread From: Vojtech Pavlik @ 2001-12-23 19:42 UTC (permalink / raw) To: really mason_at_soo_dot_com; +Cc: linux-kernel On Sun, Dec 23, 2001 at 12:08:25PM -0500, really mason_at_soo_dot_com wrote: > Yikes, hope not. But yeps, i'm using IDE drives, > ATA100 master and ATA66 slave. It's a VIA vt8233 > south bridge. i also have the FSB overclocked so > the PCI bus is running at 37mhz. That's caused > no trouble so far. And you did tell the VIA ide driver to compensate for the 37MHz, did you? ('idebus=37' kernel option) > > b > > On Sun, Dec 23, 2001 at 03:11:47PM +0100, Jens Axboe wrote: > > This sounds like disk corruption, it may be that the -pre1 changes are > > partially broken. > > > > I'll go take a look. IDE? > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Vojtech Pavlik SuSE Labs ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.5.2-pre1 oddness under X 2001-12-23 19:42 ` Vojtech Pavlik @ 2001-12-23 19:48 ` really mason_at_soo_dot_com 2001-12-23 19:53 ` Vojtech Pavlik [not found] ` <Pine.LNX.4.33.0112231457070.5312-100000@coffee.psychology.mcmaster.ca> 0 siblings, 2 replies; 12+ messages in thread From: really mason_at_soo_dot_com @ 2001-12-23 19:48 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: linux-kernel Yeps, i do have that param in lilo.conf. i thot it was only relevant to PIO modes? Shows how little i know abt the IDE drivers. b On Sun, Dec 23, 2001 at 08:42:27PM +0100, Vojtech Pavlik wrote: > On Sun, Dec 23, 2001 at 12:08:25PM -0500, really mason_at_soo_dot_com wrote: > > i also have the FSB overclocked so > > the PCI bus is running at 37mhz. > > And you did tell the VIA ide driver to compensate for the 37MHz, did > you? ('idebus=37' kernel option) ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.5.2-pre1 oddness under X 2001-12-23 19:48 ` really mason_at_soo_dot_com @ 2001-12-23 19:53 ` Vojtech Pavlik [not found] ` <Pine.LNX.4.33.0112231457070.5312-100000@coffee.psychology.mcmaster.ca> 1 sibling, 0 replies; 12+ messages in thread From: Vojtech Pavlik @ 2001-12-23 19:53 UTC (permalink / raw) To: really mason_at_soo_dot_com; +Cc: linux-kernel On Sun, Dec 23, 2001 at 02:48:00PM -0500, really mason_at_soo_dot_com wrote: > Yeps, i do have that param in lilo.conf. Good, then. In theory your IDE should operate well if you did this, eventhough you run the 37 MHz PCI. Other devices may not like this still, though. > i thot it > was only relevant to PIO modes? Shows how little i > know abt the IDE drivers. It is relevant to all PIO, DMA and UDMA modes. > > b > > On Sun, Dec 23, 2001 at 08:42:27PM +0100, Vojtech Pavlik wrote: > > On Sun, Dec 23, 2001 at 12:08:25PM -0500, really mason_at_soo_dot_com wrote: > > > i also have the FSB overclocked so > > > the PCI bus is running at 37mhz. > > > > And you did tell the VIA ide driver to compensate for the 37MHz, did > > you? ('idebus=37' kernel option) -- Vojtech Pavlik SuSE Labs ^ permalink raw reply [flat|nested] 12+ messages in thread
[parent not found: <Pine.LNX.4.33.0112231457070.5312-100000@coffee.psychology.mcmaster.ca>]
* Re: 2.5.2-pre1 oddness under X [not found] ` <Pine.LNX.4.33.0112231457070.5312-100000@coffee.psychology.mcmaster.ca> @ 2001-12-23 21:04 ` really mason_at_soo_dot_com 2001-12-24 14:03 ` Jens Axboe 0 siblings, 1 reply; 12+ messages in thread From: really mason_at_soo_dot_com @ 2001-12-23 21:04 UTC (permalink / raw) To: linux-kernel Thanks Vojtech and Mark, this is good to know and gives me more confidence messing around with this box... er, not that i'd stop in any case... On Sun, Dec 23, 2001 at 08:53:14PM +0100, Vojtech Pavlik wrote: > Good, then. In theory your IDE should operate well if you did this, > eventhough you run the 37 MHz PCI. Other devices may not like this > still, though. > > > i thot it > > was only relevant to PIO modes? Shows how little i > > know abt the IDE drivers. > > It is relevant to all PIO, DMA and UDMA modes. The funny thing still is that i get this error regardless of whether i overclock, underclock, or leave as is using kernel 2.5.2-pre1, when i start X: Inconsistency detected by ld.so: dynamic-link.h: 62: elf_get_dynamic_info: Assertion `! "bad dynamic tag"' failed! X eventually starts, minus the Sawfish window manager. Everything's fine from kernel version 2.5.1 down. If it is indeed disk corruption of some kind, i guess i better run an older kernel and fsck. On Sun, Dec 23, 2001 at 02:58:38PM -0500, Mark Hahn wrote: > overclocking is always invalid. some software is generous > enough to let you actually compensate for you botching the config. > in this case, the driver *must* have the actual PCI clock, > since the ide timings are derived from it (and *not* overclockable). > > otoh, you're overclocking, therefore don't mind bogosity, > so probably *want* overclocked ide timings. b ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.5.2-pre1 oddness under X 2001-12-23 21:04 ` really mason_at_soo_dot_com @ 2001-12-24 14:03 ` Jens Axboe 2001-12-24 20:36 ` really mason_at_soo_dot_com 0 siblings, 1 reply; 12+ messages in thread From: Jens Axboe @ 2001-12-24 14:03 UTC (permalink / raw) To: really mason_at_soo_dot_com; +Cc: linux-kernel [-- Attachment #1: Type: text/plain, Size: 779 bytes --] On Sun, Dec 23 2001, really mason_at_soo_dot_com wrote: > The funny thing still is that i get this error regardless > of whether i overclock, underclock, or leave as is using > kernel 2.5.2-pre1, when i start X: > > Inconsistency detected by ld.so: dynamic-link.h: 62: elf_get_dynamic_info: Assertion `! "bad dynamic tag"' failed! > > X eventually starts, minus the Sawfish window manager. Very good to have a test case that is easy triggerable. Could you please try with this patch applied? Check dmesg for any kernel messages or oopses, thanks. Also, send me your .config. > Everything's fine from kernel version 2.5.1 down. If it > is indeed disk corruption of some kind, i guess i better > run an older kernel and fsck. Yes that would be a good idea. -- Jens Axboe [-- Attachment #2: bio-252p1-2 --] [-- Type: text/plain, Size: 6933 bytes --] diff -ur -X exclude /opt/kernel/linux-2.5.2-pre1/drivers/block/elevator.c linux/drivers/block/elevator.c --- /opt/kernel/linux-2.5.2-pre1/drivers/block/elevator.c Sun Dec 23 17:11:54 2001 +++ linux/drivers/block/elevator.c Sun Dec 23 15:53:07 2001 @@ -124,21 +124,21 @@ inline int elv_try_merge(struct request *__rq, struct bio *bio) { unsigned int count = bio_sectors(bio); - - if (!elv_rq_merge_ok(__rq, bio)) - return ELEVATOR_NO_MERGE; + int ret = ELEVATOR_NO_MERGE; /* * we can merge and sequence is ok, check if it's possible */ - if (__rq->sector + __rq->nr_sectors == bio->bi_sector) { - return ELEVATOR_BACK_MERGE; - } else if (__rq->sector - count == bio->bi_sector) { - __rq->elevator_sequence -= count; - return ELEVATOR_FRONT_MERGE; + if (elv_rq_merge_ok(__rq, bio)) { + if (__rq->sector + __rq->nr_sectors == bio->bi_sector) { + ret = ELEVATOR_BACK_MERGE; + } else if (__rq->sector - count == bio->bi_sector) { + __rq->elevator_sequence -= count; + ret = ELEVATOR_FRONT_MERGE; + } } - return ELEVATOR_NO_MERGE; + return ret; } int elevator_linus_merge(request_queue_t *q, struct request **req, @@ -172,15 +172,17 @@ */ if (__rq->elevator_sequence-- <= 0) break; + if (__rq->flags & (REQ_BARRIER | REQ_STARTED)) break; if (!(__rq->flags & REQ_CMD)) continue; - if (__rq->elevator_sequence < 0) - break; if (!*req && bio_rq_in_between(bio, __rq, &q->queue_head)) *req = __rq; + + if (__rq->elevator_sequence < bio_sectors(bio)) + break; if ((ret = elv_try_merge(__rq, bio))) { *req = __rq; diff -ur -X exclude /opt/kernel/linux-2.5.2-pre1/drivers/block/ll_rw_blk.c linux/drivers/block/ll_rw_blk.c --- /opt/kernel/linux-2.5.2-pre1/drivers/block/ll_rw_blk.c Sun Dec 23 17:11:54 2001 +++ linux/drivers/block/ll_rw_blk.c Mon Dec 24 14:50:46 2001 @@ -155,6 +155,11 @@ blk_queue_max_sectors(q, MAX_SECTORS); blk_queue_hardsect_size(q, 512); + /* + * by default assume old behaviour and bounce for any highmem page + */ + blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH); + init_waitqueue_head(&q->queue_wait); } @@ -603,9 +608,6 @@ return 0; /* Merge is OK... */ - if (q->last_merge == &next->queuelist) - q->last_merge = NULL; - req->nr_phys_segments = total_phys_segments; req->nr_hw_segments = total_hw_segments; return 1; @@ -812,12 +814,8 @@ q->plug_tq.data = q; q->queue_flags = (1 << QUEUE_FLAG_CLUSTER); q->queue_lock = lock; + q->last_merge = NULL; - /* - * by default assume old behaviour and bounce for any highmem page - */ - blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH); - blk_queue_segment_boundary(q, 0xffffffff); blk_queue_make_request(q, __make_request); @@ -886,6 +884,12 @@ if (!rq && (gfp_mask & __GFP_WAIT)) rq = get_request_wait(q, rw); + if (rq) { + rq->flags = 0; + rq->buffer = NULL; + rq->bio = rq->biotail = NULL; + rq->waiting = NULL; + } return rq; } @@ -953,10 +977,15 @@ /* * debug stuff... */ - if (insert_here == &q->queue_head) { - struct request *__rq = __elv_next_request(q); + if (insert_here->next != &q->queue_head) { + struct request *__rq = list_entry_rq(insert_here->next); +#if 0 BUG_ON(__rq && (__rq->flags & REQ_STARTED)); +#else + if (__rq->flags & REQ_STARTED) + printk("add_request: irk, next is started\n"); +#endif } /* @@ -972,11 +1001,15 @@ void blkdev_release_request(struct request *req) { struct request_list *rl = req->rl; + request_queue_t *q = req->q; req->rq_status = RQ_INACTIVE; req->q = NULL; req->rl = NULL; + if (q && q->last_merge == &req->queuelist) + q->last_merge = NULL; + /* * Request may not have originated from ll_rw_blk. if not, * it didn't come out of our reserved rq pools @@ -1571,21 +1604,23 @@ inline void blk_recalc_rq_sectors(struct request *rq, int nsect) { - rq->hard_sector += nsect; - rq->hard_nr_sectors -= nsect; - rq->sector = rq->hard_sector; - rq->nr_sectors = rq->hard_nr_sectors; + if (rq->flags & REQ_CMD) { + rq->hard_sector += nsect; + rq->hard_nr_sectors -= nsect; + rq->sector = rq->hard_sector; + rq->nr_sectors = rq->hard_nr_sectors; - rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9; - rq->hard_cur_sectors = rq->current_nr_sectors; + rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9; + rq->hard_cur_sectors = rq->current_nr_sectors; - /* - * if total number of sectors is less than the first segment - * size, something has gone terribly wrong - */ - if (rq->nr_sectors < rq->current_nr_sectors) { - printk("blk: request botched\n"); - rq->nr_sectors = rq->current_nr_sectors; + /* + * if total number of sectors is less than the first segment + * size, something has gone terribly wrong + */ + if (rq->nr_sectors < rq->current_nr_sectors) { + printk("blk: request botched\n"); + rq->nr_sectors = rq->current_nr_sectors; + } } } diff -ur -X exclude /opt/kernel/linux-2.5.2-pre1/include/linux/blkdev.h linux/include/linux/blkdev.h --- /opt/kernel/linux-2.5.2-pre1/include/linux/blkdev.h Sun Dec 23 17:11:55 2001 +++ linux/include/linux/blkdev.h Sun Dec 23 17:15:02 2001 @@ -196,8 +196,7 @@ #define RQ_SCSI_DISCONNECTING 0xffe0 #define QUEUE_FLAG_PLUGGED 0 /* queue is plugged */ -#define QUEUE_FLAG_NOSPLIT 1 /* can process bio over several goes */ -#define QUEUE_FLAG_CLUSTER 2 /* cluster several segments into 1 */ +#define QUEUE_FLAG_CLUSTER 1 /* cluster several segments into 1 */ #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) #define blk_mark_plugged(q) set_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) diff -ur -X exclude /opt/kernel/linux-2.5.2-pre1/mm/highmem.c linux/mm/highmem.c --- /opt/kernel/linux-2.5.2-pre1/mm/highmem.c Sun Dec 23 17:11:56 2001 +++ linux/mm/highmem.c Mon Dec 24 13:59:21 2001 @@ -25,7 +25,9 @@ static void *page_pool_alloc(int gfp_mask, void *data) { - return alloc_page(gfp_mask); + int gfp = gfp_mask | (int) data; + + return alloc_page(gfp); } static void page_pool_free(void *page, void *data) @@ -252,7 +254,7 @@ if (isa_page_pool) return 0; - isa_page_pool = mempool_create(ISA_POOL_SIZE, page_pool_alloc, page_pool_free, NULL); + isa_page_pool = mempool_create(ISA_POOL_SIZE, page_pool_alloc, page_pool_free, (void *) __GFP_DMA); if (!isa_page_pool) BUG(); @@ -272,7 +274,7 @@ int i; __bio_for_each_segment(tovec, to, i, 0) { - fromvec = &from->bi_io_vec[i]; + fromvec = from->bi_io_vec + i; /* * not bounced @@ -301,7 +303,7 @@ * free up bounce indirect pages used */ __bio_for_each_segment(bvec, bio, i, 0) { - org_vec = &bio_orig->bi_io_vec[i]; + org_vec = bio_orig->bi_io_vec + i; if (bvec->bv_page == org_vec->bv_page) continue; @@ -394,7 +397,7 @@ if (!bio) bio = bio_alloc(bio_gfp, (*bio_orig)->bi_vcnt); - to = &bio->bi_io_vec[i]; + to = bio->bi_io_vec + i; to->bv_page = mempool_alloc(pool, gfp); to->bv_len = from->bv_len; ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.5.2-pre1 oddness under X 2001-12-24 14:03 ` Jens Axboe @ 2001-12-24 20:36 ` really mason_at_soo_dot_com 2001-12-24 20:44 ` really mason_at_soo_dot_com 0 siblings, 1 reply; 12+ messages in thread From: really mason_at_soo_dot_com @ 2001-12-24 20:36 UTC (permalink / raw) To: linux-kernel On Mon, Dec 24, 2001 at 03:03:40PM +0100, Jens Axboe wrote: > > Inconsistency detected by ld.so: dynamic-link.h: 62: elf_get_dynamic_info: Assertion `! "bad dynamic tag"' failed! > > > > X eventually starts, minus the Sawfish window manager. > > Very good to have a test case that is easy triggerable. Could you please > try with this patch applied? Check dmesg for any kernel messages or > oopses, thanks. Also, send me your .config. ok, with this patch X still exhibits the same behavior, minus the above error message in .xsession-errors! Nothing in dmesg, no kernel messages, no oopsen. My .config follows. My mother broke her wrist and is in the hospital for a few days, so i'll be too busy taking care of things until late this week, to do much debugging. Apologies. ======================================================= .config -------- # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_UP_IOAPIC is not set # # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PM is not set # CONFIG_ACPI is not set # CONFIG_APM is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_PC_FIFO=y CONFIG_PARPORT_PC_SUPERIO=y # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_SUNBPP is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play configuration # # CONFIG_PNP is not set # CONFIG_ISAPNP is not set # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_LOOP is not set CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_BLK_DEV_LVM is not set # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_NETLINK=y CONFIG_RTNETLINK=y # CONFIG_NETLINK_DEV is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set CONFIG_SYN_COOKIES=y # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_TCPMSS=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_UNCLEAN=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_MIRROR=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_TCPMSS=m # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set # CONFIG_IPV6 is not set CONFIG_KHTTPD=m # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # # # # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NETLINK=y CONFIG_RTNETLINK=y # CONFIG_NET_SCH_CBQ is not set # CONFIG_NET_SCH_CSZ is not set # CONFIG_NET_SCH_PRIO is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set # CONFIG_NET_SCH_TBF is not set # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_DSMARK is not set # CONFIG_NET_SCH_INGRESS is not set # CONFIG_NET_QOS is not set # CONFIG_NET_CLS is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_COMMERIAL is not set # CONFIG_BLK_DEV_TIVO is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_AEC62XX_TUNING is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_PIIX_TUNING is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # CONFIG_BLK_DEV_ATARAID is not set # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set # # SCSI support # # CONFIG_SCSI is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNLANCE is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set # CONFIG_DE2104X is not set CONFIG_TULIP=y CONFIG_TULIP_MWI=y CONFIG_TULIP_MMIO=y # CONFIG_DE4X5 is not set # CONFIG_DGRS is not set # CONFIG_DM9102 is not set # CONFIG_EEPRO100 is not set # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_WINBOND_840 is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y # CONFIG_PPP_FILTER is not set CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # # CONFIG_INPUT is not set # CONFIG_INPUT_KEYBDEV is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y # CONFIG_SERIAL_CONSOLE is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # # I2C support # CONFIG_I2C=m # CONFIG_I2C_ALGOBIT is not set # CONFIG_I2C_ALGOPCF is not set CONFIG_I2C_CHARDEV=m CONFIG_I2C_PROC=m # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_MOUSE is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # # Input core support is needed for gameports # # # Input core support is needed for joysticks # # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_INTEL_RNG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_I810 is not set CONFIG_AGP_VIA=y # CONFIG_AGP_AMD is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_ALI is not set # CONFIG_AGP_SWORKS is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_GAMMA is not set CONFIG_DRM_R128=m # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_MGA is not set # CONFIG_MWAVE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=m CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=m # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y # CONFIG_RAMFS is not set CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_MINIX_FS=m # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set CONFIG_HPFS_FS=m CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y CONFIG_QNX4FS_FS=m # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set CONFIG_UDF_FS=m # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # CONFIG_CODA_FS=m # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y CONFIG_SUNRPC=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="y" # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set CONFIG_ZISOFS_FS=m CONFIG_ZLIB_FS_INFLATE=m # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set CONFIG_NLS_CODEPAGE_863=m # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # # CONFIG_FB is not set # # Sound # CONFIG_SOUND=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set CONFIG_SOUND_EMU10K1=m CONFIG_MIDI_EMU10K1=y # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set CONFIG_SOUND_VIA82CXXX=m # CONFIG_MIDI_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set # CONFIG_SOUND_TVMIXER is not set # # USB support # # CONFIG_USB is not set # # USB Controllers # # CONFIG_USB_UHCI is not set # CONFIG_USB_UHCI_ALT is not set # CONFIG_USB_OHCI is not set # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH is not set # CONFIG_USB_STORAGE is not set # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # # USB Human Interface Devices (HID) # # # Input core support is needed for USB HID # # # USB Imaging devices # # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_PEGASUS is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set # # USB Miscellaneous drivers # # CONFIG_USB_RIO500 is not set # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_BUGVERBOSE is not set ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.5.2-pre1 oddness under X 2001-12-24 20:36 ` really mason_at_soo_dot_com @ 2001-12-24 20:44 ` really mason_at_soo_dot_com 0 siblings, 0 replies; 12+ messages in thread From: really mason_at_soo_dot_com @ 2001-12-24 20:44 UTC (permalink / raw) To: linux-kernel Also, i'm using gcc 3.0.3, binutils 2.11.2. Hm. And Glibc 2.2.4 , X 4.1.0 with GATO patches for the rage128 driver, and sawfish 1.0.1. b On Mon, Dec 24, 2001 at 03:36:35PM -0500, really mason_at_soo_dot_com wrote: > ok, with this patch X still exhibits the same behavior, > minus the above error message in .xsession-errors! > > Nothing in dmesg, no kernel messages, no oopsen. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.5.2-pre1 oddness under X 2001-12-23 17:08 ` really mason_at_soo_dot_com 2001-12-23 19:42 ` Vojtech Pavlik @ 2001-12-23 20:37 ` Ryan Cumming 1 sibling, 0 replies; 12+ messages in thread From: Ryan Cumming @ 2001-12-23 20:37 UTC (permalink / raw) To: linux-kernel On December 23, 2001 09:08, really mason_at_soo_dot_com wrote: > Yikes, hope not. But yeps, i'm using IDE drives, > ATA100 master and ATA66 slave. It's a VIA vt8233 > south bridge. i also have the FSB overclocked so > the PCI bus is running at 37mhz. That's caused > no trouble so far. I saw mild disk corruption with a VT82C686B and AT33 master (it's a AT100 drive with a 40w cable ;) in 2.5.2pre1. Same setup works fine with 2.4.17, no overclocking. -Ryan ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2001-12-24 20:44 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-12-22 21:46 2.5.2-pre1 oddness under X really mason_at_soo_dot_com
2001-12-22 22:24 ` Pierre Rousselet
2001-12-23 14:11 ` Jens Axboe
2001-12-23 17:08 ` really mason_at_soo_dot_com
2001-12-23 19:42 ` Vojtech Pavlik
2001-12-23 19:48 ` really mason_at_soo_dot_com
2001-12-23 19:53 ` Vojtech Pavlik
[not found] ` <Pine.LNX.4.33.0112231457070.5312-100000@coffee.psychology.mcmaster.ca>
2001-12-23 21:04 ` really mason_at_soo_dot_com
2001-12-24 14:03 ` Jens Axboe
2001-12-24 20:36 ` really mason_at_soo_dot_com
2001-12-24 20:44 ` really mason_at_soo_dot_com
2001-12-23 20:37 ` Ryan Cumming
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox