Applied "regulator: pwm-regulator: Ensure headings aren't confused with properties" to the regulator tree

[Mark Brown <broonie@kernel.org>]

The patch

   regulator: pwm-regulator: Ensure headings aren't confused with properties

has been applied to the regulator tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From a505bfb10a0fc6f4342a2521b899d61ff2461e72 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Thu, 9 Jul 2015 16:35:26 +0100
Subject: [PATCH] regulator: pwm-regulator: Ensure headings aren't confused
 with properties

We're using capitalisation and removing the '-' to mitigate confusion.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 Documentation/devicetree/bindings/regulator/pwm-regulator.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index 892b36655b3d..23b47720b2e4 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -3,7 +3,7 @@ Bindings for the Generic PWM Regulator
 
 Currently supports 2 modes of operation:
 
-voltage-table:		When in this mode, a voltage table (See below) of
+Voltage Table:		When in this mode, a voltage table (See below) of
 			predefined voltage <=> duty-cycle values must be
 			provided via DT. Limitations are that the regulator can
 			only operate at the voltages supplied in the table.
@@ -13,7 +13,7 @@ voltage-table:		When in this mode, a voltage table (See below) of
 			the user if the assumptions made in continuous-voltage
 			mode do not reign true.
 
-continuous-voltage:	This mode uses the regulator's maximum and minimum
+Continuous Voltage:	This mode uses the regulator's maximum and minimum
 			supplied voltages specified in the
 			regulator-{min,max}-microvolt properties to calculate
 			appropriate duty-cycle values.  This allows for a much
-- 
2.1.4