From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754636AbcCBO2g (ORCPT ); Wed, 2 Mar 2016 09:28:36 -0500 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:53406 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753642AbcCBO2f (ORCPT ); Wed, 2 Mar 2016 09:28:35 -0500 From: Mark Brown To: Laxman Dewangan , Mark Brown Cc: linux-kernel@vger.kernel.org In-Reply-To: Message-Id: Date: Wed, 02 Mar 2016 23:28:29 +0900 X-SA-Exim-Connect-IP: 122.212.32.58 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "regulator: DT: Add DT property for active-discharge configuration" to the regulator tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: Yes (on mezzanine.sirena.org.uk) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The patch regulator: DT: Add DT property for active-discharge configuration has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From bd667d40a999e35c270e424b6d550410cb2c6d06 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 2 Mar 2016 16:24:45 +0530 Subject: [PATCH] regulator: DT: Add DT property for active-discharge configuration Add common DT property for regulator node to support of active discharge enable/disable configuration of regulator. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/regulator.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 1d112fc456aa..ecfc593cac15 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -44,6 +44,11 @@ Optional properties: any consumer request. - regulator-pull-down: Enable pull down resistor when the regulator is disabled. - regulator-over-current-protection: Enable over current protection. +- regulator-active-discharge: tristate, enable/disable active discharge of + regulators. The values are: + 0: Disable active discharge. + 1: Enable active discharge. + Absence of this property will leave configuration to default. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple -- 2.7.0