From: Mark Brown <broonie@kernel.org>
To: Akshu Agrawal <akshu.agrawal@amd.com>
Cc: Mark Brown <broonie@kernel.org>,
"moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER
MANAGEM..." <alsa-devel@alsa-project.org>,
open list <linux-kernel@vger.kernel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Takashi Iwai <tiwai@suse.com>,
Liam Girdwood <lgirdwood@gmail.com>,
djkurtz@chromium.org, Mark Brown <broonie@kernel.org>,
Wei Yongjun <weiyongjun1@huawei.com>,
"Mukunda, Vijendar" <Vijendar.Mukunda@amd.com>,
Alex Deucher <alexander.deucher@amd.com>,
akshu.agrawal@amd.com, Guenter Roeck <linux@roeck-us.net>,
alsa-devel@alsa-project.org
Subject: Applied "ASoC: AMD: Configure channel 1 or channel 0 for capture" to the asoc tree
Date: Fri, 22 Jun 2018 15:50:27 +0100 [thread overview]
Message-ID: <E1fWNON-0002df-TP@debutante> (raw)
In-Reply-To: <1528354129-5023-2-git-send-email-akshu.agrawal@amd.com>
The patch
ASoC: AMD: Configure channel 1 or channel 0 for capture
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 2718c89a233bf8549fdba0925947b2c3cb887a95 Mon Sep 17 00:00:00 2001
From: Akshu Agrawal <akshu.agrawal@amd.com>
Date: Thu, 21 Jun 2018 12:58:17 +0800
Subject: [PATCH] ASoC: AMD: Configure channel 1 or channel 0 for capture
ST/CZ SoC have 2 channels for capture in the I2SSP path.
The DMA though these channels is done using the same dma
descriptors.
We configure the channel and enable it on the basis of
channel selected by machine driver. Machine driver knows
which codec sits on which channel and thus sends the information
to dma driver.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/amd/acp-da7219-max98357a.c | 43 ++++++++++++++---
sound/soc/amd/acp-pcm-dma.c | 71 +++++++++++++++++++++++++++-
sound/soc/amd/acp.h | 4 ++
3 files changed, 111 insertions(+), 7 deletions(-)
diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c
index 566bd268be3a..f42606e5879e 100644
--- a/sound/soc/amd/acp-da7219-max98357a.c
+++ b/sound/soc/amd/acp-da7219-max98357a.c
@@ -149,6 +149,7 @@ static int cz_da7219_startup(struct snd_pcm_substream *substream)
&constraints_rates);
machine->i2s_instance = I2S_SP_INSTANCE;
+ machine->capture_channel = CAP_CHANNEL1;
return da7219_clk_enable(substream);
}
@@ -172,7 +173,7 @@ static void cz_max_shutdown(struct snd_pcm_substream *substream)
da7219_clk_disable();
}
-static int cz_dmic_startup(struct snd_pcm_substream *substream)
+static int cz_dmic0_startup(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_card *card = rtd->card;
@@ -182,6 +183,17 @@ static int cz_dmic_startup(struct snd_pcm_substream *substream)
return da7219_clk_enable(substream);
}
+static int cz_dmic1_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_card *card = rtd->card;
+ struct acp_platform_info *machine = snd_soc_card_get_drvdata(card);
+
+ machine->i2s_instance = I2S_SP_INSTANCE;
+ machine->capture_channel = CAP_CHANNEL0;
+ return da7219_clk_enable(substream);
+}
+
static void cz_dmic_shutdown(struct snd_pcm_substream *substream)
{
da7219_clk_disable();
@@ -197,8 +209,13 @@ static const struct snd_soc_ops cz_max_play_ops = {
.shutdown = cz_max_shutdown,
};
-static const struct snd_soc_ops cz_dmic_cap_ops = {
- .startup = cz_dmic_startup,
+static const struct snd_soc_ops cz_dmic0_cap_ops = {
+ .startup = cz_dmic0_startup,
+ .shutdown = cz_dmic_shutdown,
+};
+
+static const struct snd_soc_ops cz_dmic1_cap_ops = {
+ .startup = cz_dmic1_startup,
.shutdown = cz_dmic_shutdown,
};
@@ -241,8 +258,9 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = {
.ops = &cz_max_play_ops,
},
{
- .name = "dmic",
- .stream_name = "DMIC Capture",
+ /* C panel DMIC */
+ .name = "dmic0",
+ .stream_name = "DMIC0 Capture",
.platform_name = "acp_audio_dma.0.auto",
.cpu_dai_name = "designware-i2s.3.auto",
.codec_dai_name = "adau7002-hifi",
@@ -250,7 +268,20 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = {
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
| SND_SOC_DAIFMT_CBM_CFM,
.dpcm_capture = 1,
- .ops = &cz_dmic_cap_ops,
+ .ops = &cz_dmic0_cap_ops,
+ },
+ {
+ /* A/B panel DMIC */
+ .name = "dmic1",
+ .stream_name = "DMIC1 Capture",
+ .platform_name = "acp_audio_dma.0.auto",
+ .cpu_dai_name = "designware-i2s.2.auto",
+ .codec_dai_name = "adau7002-hifi",
+ .codec_name = "ADAU7002:00",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBM_CFM,
+ .dpcm_capture = 1,
+ .ops = &cz_dmic1_cap_ops,
},
};
diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 1458b5048498..3c3d398d0d0b 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -336,6 +336,61 @@ static void config_acp_dma(void __iomem *acp_mmio,
rtd->dma_dscr_idx_2, asic_type);
}
+static void acp_dma_cap_channel_enable(void __iomem *acp_mmio,
+ u16 cap_channel)
+{
+ u32 val, ch_reg, imr_reg, res_reg;
+
+ switch (cap_channel) {
+ case CAP_CHANNEL1:
+ ch_reg = mmACP_I2SMICSP_RER1;
+ res_reg = mmACP_I2SMICSP_RCR1;
+ imr_reg = mmACP_I2SMICSP_IMR1;
+ break;
+ case CAP_CHANNEL0:
+ default:
+ ch_reg = mmACP_I2SMICSP_RER0;
+ res_reg = mmACP_I2SMICSP_RCR0;
+ imr_reg = mmACP_I2SMICSP_IMR0;
+ break;
+ }
+ val = acp_reg_read(acp_mmio,
+ mmACP_I2S_16BIT_RESOLUTION_EN);
+ if (val & ACP_I2S_MIC_16BIT_RESOLUTION_EN) {
+ acp_reg_write(0x0, acp_mmio, ch_reg);
+ /* Set 16bit resolution on capture */
+ acp_reg_write(0x2, acp_mmio, res_reg);
+ }
+ val = acp_reg_read(acp_mmio, imr_reg);
+ val &= ~ACP_I2SMICSP_IMR1__I2SMICSP_RXDAM_MASK;
+ val &= ~ACP_I2SMICSP_IMR1__I2SMICSP_RXFOM_MASK;
+ acp_reg_write(val, acp_mmio, imr_reg);
+ acp_reg_write(0x1, acp_mmio, ch_reg);
+}
+
+static void acp_dma_cap_channel_disable(void __iomem *acp_mmio,
+ u16 cap_channel)
+{
+ u32 val, ch_reg, imr_reg;
+
+ switch (cap_channel) {
+ case CAP_CHANNEL1:
+ imr_reg = mmACP_I2SMICSP_IMR1;
+ ch_reg = mmACP_I2SMICSP_RER1;
+ break;
+ case CAP_CHANNEL0:
+ default:
+ imr_reg = mmACP_I2SMICSP_IMR0;
+ ch_reg = mmACP_I2SMICSP_RER0;
+ break;
+ }
+ val = acp_reg_read(acp_mmio, imr_reg);
+ val |= ACP_I2SMICSP_IMR1__I2SMICSP_RXDAM_MASK;
+ val |= ACP_I2SMICSP_IMR1__I2SMICSP_RXFOM_MASK;
+ acp_reg_write(val, acp_mmio, imr_reg);
+ acp_reg_write(0x0, acp_mmio, ch_reg);
+}
+
/* Start a given DMA channel transfer */
static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num)
{
@@ -773,8 +828,10 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream,
if (WARN_ON(!rtd))
return -EINVAL;
- if (pinfo)
+ if (pinfo) {
rtd->i2s_instance = pinfo->i2s_instance;
+ rtd->capture_channel = pinfo->capture_channel;
+ }
if (adata->asic_type == CHIP_STONEY) {
val = acp_reg_read(adata->acp_mmio,
mmACP_I2S_16BIT_RESOLUTION_EN);
@@ -990,6 +1047,18 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
acp_dma_start(rtd->acp_mmio, rtd->ch1);
acp_dma_start(rtd->acp_mmio, rtd->ch2);
} else {
+ if (rtd->capture_channel == CAP_CHANNEL0) {
+ acp_dma_cap_channel_disable(rtd->acp_mmio,
+ CAP_CHANNEL1);
+ acp_dma_cap_channel_enable(rtd->acp_mmio,
+ CAP_CHANNEL0);
+ }
+ if (rtd->capture_channel == CAP_CHANNEL1) {
+ acp_dma_cap_channel_disable(rtd->acp_mmio,
+ CAP_CHANNEL0);
+ acp_dma_cap_channel_enable(rtd->acp_mmio,
+ CAP_CHANNEL1);
+ }
acp_dma_start(rtd->acp_mmio, rtd->ch2);
acp_dma_start(rtd->acp_mmio, rtd->ch1);
}
diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h
index 9cd3e96c84d4..3190fdce6307 100644
--- a/sound/soc/amd/acp.h
+++ b/sound/soc/amd/acp.h
@@ -55,6 +55,8 @@
#define I2S_SP_INSTANCE 0x01
#define I2S_BT_INSTANCE 0x02
+#define CAP_CHANNEL0 0x00
+#define CAP_CHANNEL1 0x01
#define ACP_TILE_ON_MASK 0x03
#define ACP_TILE_OFF_MASK 0x02
@@ -125,6 +127,7 @@ struct audio_substream_data {
unsigned int order;
u16 num_of_pages;
u16 i2s_instance;
+ u16 capture_channel;
u16 direction;
u16 ch1;
u16 ch2;
@@ -155,6 +158,7 @@ struct audio_drv_data {
*/
struct acp_platform_info {
u16 i2s_instance;
+ u16 capture_channel;
};
union acp_dma_count {
--
2.18.0.rc2
next prev parent reply other threads:[~2018-06-22 14:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-07 6:48 [PATCH 1/2] ASoC: AMD: Add NULL pointer check Akshu Agrawal
2018-06-07 6:48 ` [v2, 2/2] ASoC: AMD: Configure channel 1 or channel 0 for capture Akshu Agrawal
2018-06-20 14:02 ` Mark Brown
2018-06-21 4:48 ` Agrawal, Akshu
2018-06-22 14:50 ` Mark Brown [this message]
2018-06-18 12:00 ` Applied "ASoC: AMD: Add NULL pointer check" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1fWNON-0002df-TP@debutante \
--to=broonie@kernel.org \
--cc=Vijendar.Mukunda@amd.com \
--cc=akshu.agrawal@amd.com \
--cc=alexander.deucher@amd.com \
--cc=alsa-devel@alsa-project.org \
--cc=djkurtz@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=tiwai@suse.com \
--cc=weiyongjun1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox