Re: [PATCH 02/11] ASoC: jz4740-i2s: Refactor DMA channel setup

[Paul Cercueil <paul@crapouillou.net>]

Le mer., juil. 6 2022 at 22:13:21 +0100, Aidan MacDonald 
<aidanmacdonald.0x0@gmail.com> a écrit :
> It's simpler to set up the playback and capture DMA settings
> at driver probe time instead of during DAI probing.
> 
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
> ---
>  sound/soc/jz4740/jz4740-i2s.c | 23 +++++------------------
>  1 file changed, 5 insertions(+), 18 deletions(-)
> 
> diff --git a/sound/soc/jz4740/jz4740-i2s.c 
> b/sound/soc/jz4740/jz4740-i2s.c
> index 298ff0a83931..ecd8df70d39c 100644
> --- a/sound/soc/jz4740/jz4740-i2s.c
> +++ b/sound/soc/jz4740/jz4740-i2s.c
> @@ -95,7 +95,6 @@ struct i2s_soc_info {
>  struct jz4740_i2s {
>  	struct resource *mem;
>  	void __iomem *base;
> -	dma_addr_t phys_base;

Acked-by: Paul Cercueil <paul@crapouillou.net>

Note that you can remove "mem" too, it's not used anywhere.

Cheers,
-Paul

> 
>  	struct clk *clk_aic;
>  	struct clk *clk_i2s;
> @@ -370,21 +369,6 @@ static int jz4740_i2s_resume(struct 
> snd_soc_component *component)
>  	return 0;
>  }
> 
> -static void jz4740_i2s_init_pcm_config(struct jz4740_i2s *i2s)
> -{
> -	struct snd_dmaengine_dai_dma_data *dma_data;
> -
> -	/* Playback */
> -	dma_data = &i2s->playback_dma_data;
> -	dma_data->maxburst = 16;
> -	dma_data->addr = i2s->phys_base + JZ_REG_AIC_FIFO;
> -
> -	/* Capture */
> -	dma_data = &i2s->capture_dma_data;
> -	dma_data->maxburst = 16;
> -	dma_data->addr = i2s->phys_base + JZ_REG_AIC_FIFO;
> -}
> -
>  static int jz4740_i2s_dai_probe(struct snd_soc_dai *dai)
>  {
>  	struct jz4740_i2s *i2s = snd_soc_dai_get_drvdata(dai);
> @@ -395,7 +379,6 @@ static int jz4740_i2s_dai_probe(struct 
> snd_soc_dai *dai)
>  	if (ret)
>  		return ret;
> 
> -	jz4740_i2s_init_pcm_config(i2s);
>  	snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data,
>  		&i2s->capture_dma_data);
> 
> @@ -529,7 +512,11 @@ static int jz4740_i2s_dev_probe(struct 
> platform_device *pdev)
>  	if (IS_ERR(i2s->base))
>  		return PTR_ERR(i2s->base);
> 
> -	i2s->phys_base = mem->start;
> +	i2s->playback_dma_data.maxburst = 16;
> +	i2s->playback_dma_data.addr = mem->start + JZ_REG_AIC_FIFO;
> +
> +	i2s->capture_dma_data.maxburst = 16;
> +	i2s->capture_dma_data.addr = mem->start + JZ_REG_AIC_FIFO;
> 
>  	i2s->clk_aic = devm_clk_get(dev, "aic");
>  	if (IS_ERR(i2s->clk_aic))
> --
> 2.35.1
>