From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 2 May 2001 16:22:45 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 2 May 2001 16:22:35 -0400 Received: from imladris.infradead.org ([194.205.184.45]:48912 "EHLO infradead.org") by vger.kernel.org with ESMTP id ; Wed, 2 May 2001 16:22:26 -0400 X-Originating-IP: [213.201.141.5] From: "Toshio Spoor" To: rhw@memalpha.cx Subject: bug-report: reboot hangs system Date: Wed, 18 Apr 2001 12:39:11 -0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 18 Apr 2001 12:39:12.0132 (UTC) FILETIME=[9200BC40:01C0C804] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi Riley, I am not sure if I should have send this bug-report to you. I hope you don't mind. If you do could you send me the correct email adress. Many thanks in advance. Toshio [1.] One line summary of the problem: Reboot command hangs system. [2.] Full description of the problem/report: After I issue the command "reboot" from the prompt the system closes down normally. Then the system says : "Restarting system.. ". The screen becomes black and system hangs. init 0 works correctly system shuts down normally. I already tried possible kernel-parameters : reboot=[c|w],[b|h] Problems only seems to happen on the IBM's I have here. IBM GL300 IBM Aptiva (machine in this BUG-REPORT) The system has the latest patches from RH. [3.] Keywords (i.e., modules, networking, kernel): Kernel [4.] Kernel version (from /proc/version): Linux version 2.4.3 (root@mysystem) (gcc version 2.96 20000731 (Red Hat Linux 7.0)) #1 Mon Apr 2 14:50:23 CEST 2001 [5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) N/A [6.] A small shell script or example program which triggers the problem (if possible) #reboot [enter] [7.] Environment [7.1.] Software (add the output of the ver_linux script here) Linux sunspot 2.4.3 #1 Mon Apr 2 14:50:23 CEST 2001 i686 unknown Gnu C 2.96 Gnu make 3.79.1 binutils 2.10.0.18 util-linux 2.10m modutils 2.3.21 e2fsprogs 1.18 pcmcia-cs 3.1.19 PPP 2.3.11 Linux C Library > libc.2.2 Dynamic linker (ldd) 2.2 Procps 2.0.7 Net-tools 1.56 Console-tools 0.3.3 Sh-utils 2.0 Modules Loaded [7.2.] Processor information (from /proc/cpuinfo): processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 3 model name : Pentium II (Klamath) stepping : 3 cpu MHz : 233.346 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov mmx bogomips : 465.30 [7.3.] Module information (from /proc/modules): $null [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0213-0213 : isapnp read 02f8-02ff : serial(auto) 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 0a79-0a79 : isapnp write 0cf8-0cff : PCI conf1 1000-100f : Intel Corporation 82371AB PIIX4 IDE 1200-123f : Intel Corporation 82371AB PIIX4 ACPI 1240-125f : Intel Corporation 82371AB PIIX4 ACPI 2000-2fff : PCI Bus #01 2000-20ff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X 3000-307f : 3Com Corporation 3c905C-TX [Fast Etherlink] (#2) 3000-307f : eth1 3080-30ff : 3Com Corporation 3c905C-TX [Fast Etherlink] 3080-30ff : eth0 3100-311f : Intel Corporation 82371AB PIIX4 USB 00000000-0009efff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-07ffffff : System RAM 00100000-00200ceb : Kernel code 00200cec-00256b5b : Kernel data 20000000-200fffff : PCI Bus #01 20000000-20000fff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X 20100000-201fffff : Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator] 20200000-20200fff : Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator] 20201000-2020107f : 3Com Corporation 3c905C-TX [Fast Etherlink] (#2) 20201080-202010ff : 3Com Corporation 3c905C-TX [Fast Etherlink] 21000000-21ffffff : PCI Bus #01 21000000-21ffffff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X f8000000-fbffffff : Intel Corporation 440LX/EX - 82443LX/EX Host bridge [7.5.] PCI information ('lspci -vvv' as root) 00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- 00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable+ DSel=0 DScale=2 PME- 00:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74) Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable+ DSel=0 DScale=2 PME- 00:12.0 Multimedia audio controller: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator] (rev 01) Subsystem: IBM CS4610 SoundFusion Audio Accelerator Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- [disabled] [size=128K] Capabilities: [50] AGP version 1.0 Status: RQ=255 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate= [7.6.] SCSI information (from /proc/scsi/scsi) $null [7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): REDHAT v7.0 | Problems ? Init | Problems ? /proc/apm 1.14 1.2 0x03 0x01 0xff 0x80 -1% -1 ? /proc/misc 175 agpgart 134 apm_bios Relevant code : process.c _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.