Linux version 2.4.7-VxOS (root@einstein) (gcc version egcs-2.91.66
19990314/Lin
x (egcs-1.1.2 release)) #1 SMP Sun Jul 29 17:07:50 BST 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000ff87000 (usable)
 BIOS-e820: 000000000ff87000 - 000000000ffa6000 (ACPI data)
 BIOS-e820: 000000000ffa6000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Scan SMP from 40000000 for 1024 bytes.
Scan SMP from 4009fc00 for 1024 bytes.
Scan SMP from 400f0000 for 65536 bytes.
found SMP MP-table at 000fe710
hm, page 000fe000 reserved twice.
hm, page 000ff000 reserved twice.
hm, page 000f0000 reserved twice.
On node 0 totalpages: 65415
zone(0): 4096 pages.
zone(1): 61319 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
    IMCR and PIC compatibility mode.
OEM ID: DELL     Product ID: WS 330       APIC at: 0x0
BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw
vendor)
Bus #0 is ISA
Int: type 0, pol 0, trig 0, bus 0, IRQ 00, APIC ID 0, APIC INT 02
Int: type 0, pol 0, trig 0, bus 0, IRQ 01, APIC ID 0, APIC INT 01
Int: type 0, pol 0, trig 0, bus 0, IRQ 03, APIC ID 0, APIC INT 03
Int: type 0, pol 0, trig 0, bus 0, IRQ 04, APIC ID 0, APIC INT 04
Int: type 0, pol 0, trig 0, bus 0, IRQ 05, APIC ID 0, APIC INT 05
Int: type 0, pol 0, trig 0, bus 0, IRQ 06, APIC ID 0, APIC INT 06
Int: type 0, pol 0, trig 0, bus 0, IRQ 07, APIC ID 0, APIC INT 07
Int: type 0, pol 0, trig 0, bus 0, IRQ 08, APIC ID 0, APIC INT 08
Int: type 0, pol 0, trig 0, bus 0, IRQ 09, APIC ID 0, APIC INT 09
Int: type 0, pol 0, trig 0, bus 0, IRQ 0a, APIC ID 0, APIC INT 0a
Int: type 0, pol 0, trig 0, bus 0, IRQ 0b, APIC ID 0, APIC INT 0b
Int: type 0, pol 0, trig 0, bus 0, IRQ 0c, APIC ID 0, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 0, IRQ 0d, APIC ID 0, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 0, IRQ 0e, APIC ID 0, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 0, IRQ 0f, APIC ID 0, APIC INT 0f
Int: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID 0, APIC INT 00
Processors: 0
mapped APIC to ffffe000 (00000000)
Kernel command line: auto BOOT_IMAGE=linux-nopae ro root=305
BOOT_FILE=/boot/vm
inuz-2.4.7-nopae console=ttyS0,9600 console=tty0
Initializing CPU#0
Detected 1285.359 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2562.45 BogoMIPS
Memory: 253632k/261660k available (1445k kernel code, 7644k reserved, 1139k
dat
, 352k init, 0k highmem)
kdb version 1.8 by Scott Lurndal, Keith Owens. Copyright SGI, All Rights
Reserv
d
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU0: Intel(R) Pentium(R) 4 CPU 1300MHz stepping 0a
per-CPU timeslice cutoff: 731.49 usecs.
weird, boot CPU (#0) not listed by the BIOS.
Getting VERSION: f000acde
Getting VERSION: f0ffac21
leaving PIC mode, enabling symmetric IO mode.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
CPU present map: 1
Before bogomips.
Error: only one processor found.
Boot done.
ENABLING IO-APIC IRQs
Synchronizing Arb IDs.
..TIMER: vector=31 pin1=2 pin2=0
activating NMI Watchdog ... done.
CPU#0 NMI appears to be stuck.
testing the IO APIC.......................
.................................... done.
calibrating APIC timer ...
..... CPU clock speed is 1285.3667 MHz.
..... host bus clock speed is 0.0000 MHz.
cpu: 0, clocks: 0, slice: 0