From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262271AbVFXVDQ (ORCPT ); Fri, 24 Jun 2005 17:03:16 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263265AbVFXU7s (ORCPT ); Fri, 24 Jun 2005 16:59:48 -0400 Received: from lucidpixels.com ([66.45.37.187]:3749 "EHLO lucidpixels.com") by vger.kernel.org with ESMTP id S263215AbVFXUz6 (ORCPT ); Fri, 24 Jun 2005 16:55:58 -0400 Date: Fri, 24 Jun 2005 16:55:57 -0400 (EDT) From: Justin Piszcz X-X-Sender: jpiszcz@p34 To: linux-kernel@vger.kernel.org Subject: Promise ATA/133 Errors With 2.6.10+ Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I have two different machines with the 7200.8 Seagate 8MB 400GB drives. Both have ATA/133 controllers, the error is the same on both: Jun 24 15:24:18 localhost kernel: hde: no DRQ after issuing MULTWRITE_EXT I put the drive on an (older) Promise ATA/100 controller = works great! I put the drive on the second box on the motherboard IDE interface = works great! What happened > 2.6.10 to the promise driver? ?? Jun 24 15:24:18 localhost kernel: PDC202XX: Primary channel reset. Jun 24 15:24:18 localhost kernel: hde: timeout waiting for DMA Jun 24 15:24:18 localhost kernel: hde: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 24 15:24:18 localhost kernel: Jun 24 15:24:18 localhost kernel: ide: failed opcode was: unknown Jun 24 15:24:18 localhost kernel: hde: drive not ready for command Jun 24 15:24:18 localhost kernel: hde: status timeout: status=0xd0 { Busy } Jun 24 15:24:18 localhost kernel: Jun 24 15:24:18 localhost kernel: ide: failed opcode was: unknown Jun 24 15:24:18 localhost kernel: PDC202XX: Primary channel reset. Jun 24 15:24:18 localhost kernel: hde: no DRQ after issuing MULTWRITE_EXT Jun 24 15:24:18 localhost kernel: ide2: reset: success