From: Meelis Roos <mroos@linux.ee>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: libATA PATA status report, new patch
Date: Tue, 7 Feb 2006 19:30:56 +0200 (EET) [thread overview]
Message-ID: <Pine.SOC.4.61.0602071919550.11554@math.ut.ee> (raw)
In-Reply-To: <1139324653.18391.41.camel@localhost.localdomain>
> I've put up a -ide2 patch at
>
> http://zeniv.linux.org.uk/~alan/IDE
Success on a slightly newer VIA KT133 mainboard with Duron 1200, Seagate
40G disk and CDROM on secondary ide channel, 80 pin cable. It also
survived reading the HDD with dd into devnull. CDROM was used as the
root filesystem, successfully. Nothing on primary IDE channel.
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
ata1: PATA max UDMA/66 cmd 0x1F0 ctl 0x3F6 bmdma 0xD000 irq 14
ATA: abnormal status 0x8 on port 0x1F7
ata1: disabling port
scsi0 : pata_via
ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xD008 irq 15
ata2: dev 0 ATA-6, max UDMA/100, 78165360 sectors: LBA48
ata2: dev 1 ATAPI, max MWDMA2
via_do_set_mode: Mode=12 ast broken=N udma=66 mul=2
via_do_set_mode: Mode=68 ast broken=N udma=66 mul=2
ata2: dev 0 configured for UDMA/66
via_do_set_mode: Mode=12 ast broken=N udma=66 mul=2
via_do_set_mode: Mode=34 ast broken=N udma=66 mul=2
ata2: dev 1 configured for MWDMA2
scsi1 : pata_via
Vendor: ATA Model: ST340014A Rev: 3.04
Type: Direct-Access ANSI SCSI revision: 05
Vendor: SAMSUNG Model: CD-ROM SC-148C Rev: B100
Type: CD-ROM ANSI SCSI revision: 05
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 1:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 8x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sd 1:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:1:0: Attached scsi generic sg1 type 5
--
Meelis Roos (mroos@linux.ee)
next prev parent reply other threads:[~2006-02-07 17:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-06 16:46 libATA PATA status report, new patch Alan Cox
2006-02-06 20:04 ` Meelis Roos
2006-02-06 22:53 ` Alan Cox
2006-02-07 8:43 ` Meelis Roos
2006-02-07 11:05 ` Alan Cox
2006-02-07 11:10 ` Meelis Roos
2006-02-07 11:29 ` Ed Sweetman
2006-02-07 11:32 ` Meelis Roos
2006-02-07 11:38 ` Alan Cox
2006-02-07 15:04 ` Alan Cox
2006-02-07 17:02 ` Meelis Roos
2006-02-07 19:38 ` Duplicated SCSI messages (Was: Re: libATA PATA status report, new patch) Tomasz Kłoczko
2006-02-07 17:30 ` Meelis Roos [this message]
2006-02-07 17:50 ` libATA PATA status report, new patch Meelis Roos
2006-02-08 13:31 ` Alan Cox
2006-02-08 7:42 ` Meelis Roos
2006-02-08 18:28 ` Meelis Roos
2006-02-09 15:31 ` Alan Cox
2006-02-09 21:12 ` Meelis Roos
2006-02-10 12:01 ` Erik Mouw
2006-02-10 15:46 ` Alan Cox
2006-02-12 18:07 ` Kyle Moffett
2006-07-07 16:29 ` Wakko Warner
2006-07-07 16:52 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.SOC.4.61.0602071919550.11554@math.ut.ee \
--to=mroos@linux.ee \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox