Re: [PATCH v4 0/1] asus-wmi: Add support for custom fan curves

[Luke Jones <luke@ljones.dev>]

I will be submitting a V5 later today. While prepping for v5 I've done 
my best to minimise potential blockers in review according to what I've 
learned through past reviews :)

On Fri, Aug 20 2021 at 21:57:25 +1200, Luke D. Jones <luke@ljones.dev> 
wrote:
> Add support for custom fan curves found on some ASUS ROG laptops.
> 
> The patch has gone through a few revisions as others tested it and
> requested bahaviour changes or reported issues. V4 should be 
> considered
> finalised for now and I won't submit a new version until V4 has been
> reviewed.
> 
> - V1
>   + Initial patch work
> - V2
>   + Don't fail and remove wmi driver if error from
>     asus_wmi_evaluate_method_buf() if error is -ENODEV
> - V3
>   + Store the "default" fan curves
>   + Call throttle_thermal_policy_write() if a curve is erased to 
> ensure
>     that the factory default for a profile is applied again
> - V4
>   + Do not apply default curves by default. Testers have found that 
> the
>     default curves don't quite match actual no-curve behaviours
>   + Add method to enable/disable curves for each profile
> 
> Luke D. Jones (1):
>   asus-wmi: Add support for custom fan curves
> 
>  drivers/platform/x86/asus-wmi.c            | 672 
> +++++++++++++++++++++
>  include/linux/platform_data/x86/asus-wmi.h |   2 +
>  2 files changed, 674 insertions(+)
> 
> --
> 2.31.1
>