Re: [PATCH v1 3/3] drm/panel : innolux-ej030na and abt-y030xx067a : add .enable and .disable

[Paul Cercueil <paul@crapouillou.net>]

Hi Christophe,

Le mar., mars 1 2022 at 16:31:22 +0100, Christophe Branchereau 
<cbranchereau@gmail.com> a écrit :
> Following the introduction of bridge_atomic_enable in the ingenic
> drm driver, the crtc is enabled between .prepare and .enable, if
> it exists.
> 
> Add it so the backlight is only enabled after the crtc is, to avoid
> graphical issues.
> 
> Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
> ---
>  drivers/gpu/drm/panel/panel-abt-y030xx067a.c  | 23 ++++++++++++--
>  drivers/gpu/drm/panel/panel-innolux-ej030na.c | 31 
> ++++++++++++++++---
>  2 files changed, 48 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c 
> b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
> index f043b484055b..b5736344e3ec 100644
> --- a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
> +++ b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
> @@ -183,8 +183,6 @@ static int y030xx067a_prepare(struct drm_panel 
> *panel)
>  		goto err_disable_regulator;
>  	}
> 
> -	msleep(120);
> -
>  	return 0;
> 
>  err_disable_regulator:
> @@ -202,6 +200,25 @@ static int y030xx067a_unprepare(struct drm_panel 
> *panel)
>  	return 0;
>  }
> 
> +static int y030xx067a_enable(struct drm_panel *panel)
> +{
> +	if (panel->backlight) {
> +		/* Wait for the picture to be ready before enabling backlight */
> +		msleep(120);
> +	}
> +
> +	return 0;
> +}
> +
> +static int y030xx067a_disable(struct drm_panel *panel)
> +{
> +	struct y030xx067a *priv = to_y030xx067a(panel);
> +
> +	regmap_clear_bits(priv->map, 0x06, REG06_XPSAVE);

Shouldn't that be balanced by a regmap_set_bits() in the .enable() 
function?

Cheers,
-Paul

> +
> +	return 0;
> +}
> +
>  static int y030xx067a_get_modes(struct drm_panel *panel,
>  				struct drm_connector *connector)
>  {
> @@ -239,6 +256,8 @@ static int y030xx067a_get_modes(struct drm_panel 
> *panel,
>  static const struct drm_panel_funcs y030xx067a_funcs = {
>  	.prepare	= y030xx067a_prepare,
>  	.unprepare	= y030xx067a_unprepare,
> +	.enable		= y030xx067a_enable,
> +	.disable	= y030xx067a_disable,
>  	.get_modes	= y030xx067a_get_modes,
>  };
> 
> diff --git a/drivers/gpu/drm/panel/panel-innolux-ej030na.c 
> b/drivers/gpu/drm/panel/panel-innolux-ej030na.c
> index c558de3f99be..6de7370185cd 100644
> --- a/drivers/gpu/drm/panel/panel-innolux-ej030na.c
> +++ b/drivers/gpu/drm/panel/panel-innolux-ej030na.c
> @@ -80,8 +80,6 @@ static const struct reg_sequence 
> ej030na_init_sequence[] = {
>  	{ 0x47, 0x08 },
>  	{ 0x48, 0x0f },
>  	{ 0x49, 0x0f },
> -
> -	{ 0x2b, 0x01 },
>  };
> 
>  static int ej030na_prepare(struct drm_panel *panel)
> @@ -109,8 +107,6 @@ static int ej030na_prepare(struct drm_panel 
> *panel)
>  		goto err_disable_regulator;
>  	}
> 
> -	msleep(120);
> -
>  	return 0;
> 
>  err_disable_regulator:
> @@ -128,6 +124,31 @@ static int ej030na_unprepare(struct drm_panel 
> *panel)
>  	return 0;
>  }
> 
> +static int ej030na_enable(struct drm_panel *panel)
> +{
> +	struct ej030na *priv = to_ej030na(panel);
> +
> +	/* standby off */
> +	regmap_write(priv->map, 0x2b, 0x01);
> +
> +	if (panel->backlight) {
> +		/* Wait for the picture to be ready before enabling backlight */
> +		msleep(120);
> +	}
> +
> +	return 0;
> +}
> +
> +static int ej030na_disable(struct drm_panel *panel)
> +{
> +	struct ej030na *priv = to_ej030na(panel);
> +
> +	/* standby on */
> +	regmap_write(priv->map, 0x2b, 0x00);
> +
> +	return 0;
> +}
> +
>  static int ej030na_get_modes(struct drm_panel *panel,
>  			     struct drm_connector *connector)
>  {
> @@ -165,6 +186,8 @@ static int ej030na_get_modes(struct drm_panel 
> *panel,
>  static const struct drm_panel_funcs ej030na_funcs = {
>  	.prepare	= ej030na_prepare,
>  	.unprepare	= ej030na_unprepare,
> +	.enable		= ej030na_enable,
> +	.disable	= ej030na_disable,
>  	.get_modes	= ej030na_get_modes,
>  };
> 
> --
> 2.34.1
>