public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: William Breathitt Gray <william.gray@linaro.org>
Cc: linus.walleij@linaro.org, brgl@bgdev.pl,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	michael@walle.cc, broonie@kernel.org
Subject: Re: [PATCH v3 8/9] gpio: gpio-mm: Migrate to regmap API
Date: Wed, 23 Nov 2022 19:46:16 +0200	[thread overview]
Message-ID: <Y35caA6R8XY7LHU5@smile.fi.intel.com> (raw)
In-Reply-To: <4c7d582e4078e265d7a8d39d3aa746e573233a4e.1669100542.git.william.gray@linaro.org>

On Tue, Nov 22, 2022 at 02:11:05AM -0500, William Breathitt Gray wrote:
> The regmap API supports IO port accessors so we can take advantage of
> regmap abstractions rather than handling access to the device registers
> directly in the driver. The gpio-mm module is migrated to the new i8255
> library interface leveraging the gpio-regmap API.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

(see also below)

> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
> ---
>  drivers/gpio/gpio-gpio-mm.c | 153 +++++++-----------------------------
>  1 file changed, 29 insertions(+), 124 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c
> index 2689671b6b01..ba8847485660 100644
> --- a/drivers/gpio/gpio-gpio-mm.c
> +++ b/drivers/gpio/gpio-gpio-mm.c
> @@ -8,13 +8,13 @@
>   */
>  #include <linux/device.h>
>  #include <linux/errno.h>
> -#include <linux/gpio/driver.h>
> -#include <linux/io.h>
>  #include <linux/ioport.h>
>  #include <linux/isa.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/moduleparam.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
>  
>  #include "gpio-i8255.h"
>  
> @@ -30,83 +30,22 @@ MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses");
>  
>  #define GPIOMM_NUM_PPI 2
>  
> -/**
> - * struct gpiomm_gpio - GPIO device private data structure
> - * @chip:		instance of the gpio_chip
> - * @ppi_state:		Programmable Peripheral Interface group states
> - * @ppi:		Programmable Peripheral Interface groups
> - */
> -struct gpiomm_gpio {
> -	struct gpio_chip chip;
> -	struct i8255_state ppi_state[GPIOMM_NUM_PPI];
> -	struct i8255 __iomem *ppi;
> +static const struct regmap_range gpiomm_volatile_ranges[] = {
> +	i8255_volatile_regmap_range(0x0), i8255_volatile_regmap_range(0x4),
> +};
> +static const struct regmap_access_table gpiomm_volatile_table = {
> +	.yes_ranges = gpiomm_volatile_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(gpiomm_volatile_ranges),
> +};
> +static const struct regmap_config gpiomm_regmap_config = {
> +	.reg_bits = 8,
> +	.reg_stride = 1,
> +	.val_bits = 8,
> +	.io_port = true,
> +	.max_register = 0x7,
> +	.volatile_table = &gpiomm_volatile_table,
> +	.cache_type = REGCACHE_FLAT,
>  };
> -
> -static int gpiomm_gpio_get_direction(struct gpio_chip *chip,
> -	unsigned int offset)
> -{
> -	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
> -
> -	if (i8255_get_direction(gpiommgpio->ppi_state, offset))
> -		return GPIO_LINE_DIRECTION_IN;
> -
> -	return GPIO_LINE_DIRECTION_OUT;
> -}
> -
> -static int gpiomm_gpio_direction_input(struct gpio_chip *chip,
> -	unsigned int offset)
> -{
> -	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
> -
> -	i8255_direction_input(gpiommgpio->ppi, gpiommgpio->ppi_state, offset);
> -
> -	return 0;
> -}
> -
> -static int gpiomm_gpio_direction_output(struct gpio_chip *chip,
> -	unsigned int offset, int value)
> -{
> -	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
> -
> -	i8255_direction_output(gpiommgpio->ppi, gpiommgpio->ppi_state, offset,
> -			       value);
> -
> -	return 0;
> -}
> -
> -static int gpiomm_gpio_get(struct gpio_chip *chip, unsigned int offset)
> -{
> -	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
> -
> -	return i8255_get(gpiommgpio->ppi, offset);
> -}
> -
> -static int gpiomm_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
> -	unsigned long *bits)
> -{
> -	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
> -
> -	i8255_get_multiple(gpiommgpio->ppi, mask, bits, chip->ngpio);
> -
> -	return 0;
> -}
> -
> -static void gpiomm_gpio_set(struct gpio_chip *chip, unsigned int offset,
> -	int value)
> -{
> -	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
> -
> -	i8255_set(gpiommgpio->ppi, gpiommgpio->ppi_state, offset, value);
> -}
> -
> -static void gpiomm_gpio_set_multiple(struct gpio_chip *chip,
> -	unsigned long *mask, unsigned long *bits)
> -{
> -	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
> -
> -	i8255_set_multiple(gpiommgpio->ppi, gpiommgpio->ppi_state, mask, bits,
> -			   chip->ngpio);
> -}
>  
>  #define GPIOMM_NGPIO 48
>  static const char *gpiomm_names[GPIOMM_NGPIO] = {
> @@ -120,30 +59,11 @@ static const char *gpiomm_names[GPIOMM_NGPIO] = {
>  	"Port 2C2", "Port 2C3", "Port 2C4", "Port 2C5", "Port 2C6", "Port 2C7",
>  };
>  
> -static void gpiomm_init_dio(struct i8255 __iomem *const ppi,
> -			    struct i8255_state *const ppi_state)
> -{
> -	const unsigned long ngpio = 24;
> -	const unsigned long mask = GENMASK(ngpio - 1, 0);
> -	const unsigned long bits = 0;
> -	unsigned long i;
> -
> -	/* Initialize all GPIO to output 0 */
> -	for (i = 0; i < GPIOMM_NUM_PPI; i++) {
> -		i8255_mode0_output(&ppi[i]);
> -		i8255_set_multiple(&ppi[i], &ppi_state[i], &mask, &bits, ngpio);
> -	}
> -}
> -
>  static int gpiomm_probe(struct device *dev, unsigned int id)
>  {
> -	struct gpiomm_gpio *gpiommgpio;
>  	const char *const name = dev_name(dev);
> -	int err;
> -
> -	gpiommgpio = devm_kzalloc(dev, sizeof(*gpiommgpio), GFP_KERNEL);
> -	if (!gpiommgpio)
> -		return -ENOMEM;

> +	struct i8255_regmap_config config = {0};

{} will be okay as well.

> +	void __iomem *regs;
>  
>  	if (!devm_request_region(dev, base[id], GPIOMM_EXTENT, name)) {
>  		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
> @@ -151,34 +71,19 @@ static int gpiomm_probe(struct device *dev, unsigned int id)
>  		return -EBUSY;
>  	}
>  
> -	gpiommgpio->ppi = devm_ioport_map(dev, base[id], GPIOMM_EXTENT);
> -	if (!gpiommgpio->ppi)
> +	regs = devm_ioport_map(dev, base[id], GPIOMM_EXTENT);
> +	if (!regs)
>  		return -ENOMEM;
>  
> -	gpiommgpio->chip.label = name;
> -	gpiommgpio->chip.parent = dev;
> -	gpiommgpio->chip.owner = THIS_MODULE;
> -	gpiommgpio->chip.base = -1;
> -	gpiommgpio->chip.ngpio = GPIOMM_NGPIO;
> -	gpiommgpio->chip.names = gpiomm_names;
> -	gpiommgpio->chip.get_direction = gpiomm_gpio_get_direction;
> -	gpiommgpio->chip.direction_input = gpiomm_gpio_direction_input;
> -	gpiommgpio->chip.direction_output = gpiomm_gpio_direction_output;
> -	gpiommgpio->chip.get = gpiomm_gpio_get;
> -	gpiommgpio->chip.get_multiple = gpiomm_gpio_get_multiple;
> -	gpiommgpio->chip.set = gpiomm_gpio_set;
> -	gpiommgpio->chip.set_multiple = gpiomm_gpio_set_multiple;
> -
> -	i8255_state_init(gpiommgpio->ppi_state, GPIOMM_NUM_PPI);
> -	gpiomm_init_dio(gpiommgpio->ppi, gpiommgpio->ppi_state);
> -
> -	err = devm_gpiochip_add_data(dev, &gpiommgpio->chip, gpiommgpio);
> -	if (err) {
> -		dev_err(dev, "GPIO registering failed (%d)\n", err);
> -		return err;
> -	}
> +	config.map = devm_regmap_init_mmio(dev, regs, &gpiomm_regmap_config);
> +	if (IS_ERR(config.map))
> +		return PTR_ERR(config.map);
> +
> +	config.parent = dev;
> +	config.num_ppi = GPIOMM_NUM_PPI;
> +	config.names = gpiomm_names;
>  
> -	return 0;
> +	return devm_i8255_regmap_register(dev, &config);
>  }
>  
>  static struct isa_driver gpiomm_driver = {
> -- 
> 2.38.1
> 

-- 
With Best Regards,
Andy Shevchenko



  reply	other threads:[~2022-11-23 17:46 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-22  7:10 [PATCH v3 0/9] Migrate i8255 GPIO drivers to regmap API William Breathitt Gray
2022-11-22  7:10 ` [PATCH v3 1/9] gpio: regmap: Always set gpio_chip get_direction William Breathitt Gray
2022-11-22  7:10 ` [PATCH v3 2/9] regmap-irq: Add handle_mask_sync() callback William Breathitt Gray
2022-11-22  7:11 ` [PATCH v3 3/9] gpio: 104-dio-48e: Migrate to the regmap-irq API William Breathitt Gray
2022-11-23 15:01   ` Andy Shevchenko
2022-11-22 10:29     ` William Breathitt Gray
2022-11-27 18:31       ` Michael Walle
2022-11-27 22:00         ` William Breathitt Gray
2022-11-28  9:51           ` Andy Shevchenko
2022-11-28  9:56             ` Andy Shevchenko
2022-11-28 10:04               ` Andy Shevchenko
2022-11-28  9:41         ` Andy Shevchenko
2022-11-28  9:56           ` Michael Walle
2022-11-28 10:02             ` Andy Shevchenko
2022-11-22  7:11 ` [PATCH v3 4/9] gpio: 104-idi-48: " William Breathitt Gray
2022-11-23 17:28   ` Andy Shevchenko
2022-11-22  7:11 ` [PATCH v3 5/9] gpio: 104-idi-48: Migrate to gpio-regmap API William Breathitt Gray
2022-11-23 17:31   ` Andy Shevchenko
2022-11-22  7:11 ` [PATCH v3 6/9] gpio: i8255: " William Breathitt Gray
2022-11-23 17:42   ` Andy Shevchenko
2022-11-22 11:34     ` William Breathitt Gray
2022-11-22  7:11 ` [PATCH v3 7/9] gpio: 104-dio-48e: Migrate to regmap API William Breathitt Gray
2022-11-23 17:43   ` Andy Shevchenko
2022-11-22  7:11 ` [PATCH v3 8/9] gpio: gpio-mm: " William Breathitt Gray
2022-11-23 17:46   ` Andy Shevchenko [this message]
2022-11-22  7:11 ` [PATCH v3 9/9] gpio: i8255: Remove unused legacy interface William Breathitt Gray
2022-11-23 17:31   ` Andy Shevchenko
2022-12-09 18:59 ` (subset) [PATCH v3 0/9] Migrate i8255 GPIO drivers to regmap API Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y35caA6R8XY7LHU5@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=brgl@bgdev.pl \
    --cc=broonie@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael@walle.cc \
    --cc=william.gray@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox