From: Petr Mladek <pmladek@suse.com>
To: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>,
Steven Rostedt <rostedt@goodmis.org>,
Thomas Gleixner <tglx@linutronix.de>,
linux-kernel@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: [PATCH printk v4 11/39] console: introduce wrappers to read/write console flags
Date: Tue, 15 Nov 2022 13:26:59 +0100 [thread overview]
Message-ID: <Y3OFk2n7BquPUkOf@alley> (raw)
In-Reply-To: <20221114162932.141883-12-john.ogness@linutronix.de>
On Mon 2022-11-14 17:35:04, John Ogness wrote:
> After switching to SRCU for console list iteration, some readers
> will begin readings console->flags as a data race. Locklessly
> reading console->flags provides a consistent value because there
> is at most one CPU modifying console->flags and that CPU is
> using only read-modify-write operations.
>
> Introduce a wrapper for SRCU iterators to read console flags.
> Introduce a matching wrapper to write to flags of registered
> consoles. Writing to flags of registered consoles is synchronized
> by the console_list_lock.
>
> Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Best Regards,
Petr
next prev parent reply other threads:[~2022-11-15 12:27 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-14 16:28 [PATCH printk v4 00/39] reduce console_lock scope John Ogness
2022-11-14 16:28 ` [PATCH printk v4 01/39] serial: kgdboc: Lock console list in probe function John Ogness
2022-11-14 16:28 ` [PATCH printk v4 02/39] printk: Convert console_drivers list to hlist John Ogness
2022-11-14 16:28 ` [PATCH printk v4 03/39] printk: Prepare for SRCU console list protection John Ogness
2022-11-15 10:50 ` Petr Mladek
2022-11-15 11:33 ` John Ogness
2022-11-15 12:03 ` Petr Mladek
2022-11-14 16:28 ` [PATCH printk v4 04/39] printk: register_console: use "registered" for variable names John Ogness
2022-11-15 11:01 ` Petr Mladek
2022-11-14 16:28 ` [PATCH printk v4 05/39] printk: fix setting first seq for consoles John Ogness
2022-11-15 12:04 ` Petr Mladek
2022-11-14 16:28 ` [PATCH printk v4 06/39] um: kmsg_dump: only dump when no output console available John Ogness
2022-11-14 16:29 ` [PATCH printk v4 07/39] tty: serial: kgdboc: document console_lock usage John Ogness
2022-11-14 16:29 ` [PATCH printk v4 08/39] tty: tty_io: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 09/39] proc: consoles: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 10/39] printk: introduce console_list_lock John Ogness
2022-11-14 16:29 ` [PATCH printk v4 11/39] console: introduce wrappers to read/write console flags John Ogness
2022-11-15 12:26 ` Petr Mladek [this message]
2022-11-14 16:29 ` [PATCH printk v4 12/39] um: kmsg_dumper: use srcu console list iterator John Ogness
2022-11-14 16:29 ` [PATCH printk v4 13/39] kdb: " John Ogness
2022-11-14 21:16 ` Aaron Tomlin
2022-11-14 16:29 ` [PATCH printk v4 14/39] printk: console_flush_all: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 15/39] printk: __pr_flush: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 16/39] printk: console_is_usable: use console_srcu_read_flags John Ogness
2022-11-15 12:47 ` Petr Mladek
2022-11-14 16:29 ` [PATCH printk v4 17/39] printk: console_unblank: use srcu console list iterator John Ogness
2022-11-14 16:29 ` [PATCH printk v4 18/39] printk: console_flush_on_panic: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 19/39] printk: console_device: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 20/39] console: introduce console_is_registered() John Ogness
2022-11-14 16:29 ` [PATCH printk v4 21/39] serial_core: replace uart_console_enabled() with uart_console_registered() John Ogness
2022-11-14 16:29 ` [PATCH printk v4 22/39] tty: nfcon: use console_is_registered() John Ogness
2022-11-15 13:08 ` Petr Mladek
2022-11-14 16:29 ` [PATCH printk v4 23/39] efi: earlycon: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 24/39] tty: hvc: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 25/39] tty: serial: earlycon: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 26/39] tty: serial: pic32_uart: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 27/39] tty: serial: samsung_tty: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 28/39] tty: serial: xilinx_uartps: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 29/39] usb: early: xhci-dbc: " John Ogness
2022-11-14 16:29 ` [PATCH printk v4 30/39] netconsole: avoid CON_ENABLED misuse to track registration John Ogness
2022-11-14 16:29 ` [PATCH printk v4 31/39] printk, xen: fbfront: create/use safe function for forcing preferred John Ogness
2022-11-14 19:51 ` John Ogness
2022-11-15 13:22 ` Petr Mladek
2022-11-14 16:29 ` [PATCH printk v4 32/39] tty: tty_io: use console_list_lock for list synchronization John Ogness
2022-11-14 16:29 ` [PATCH printk v4 33/39] proc: consoles: use console_list_lock for list iteration John Ogness
2022-11-14 16:29 ` [PATCH printk v4 34/39] tty: serial: kgdboc: use srcu console list iterator John Ogness
2022-11-15 15:17 ` Petr Mladek
2022-11-14 16:29 ` [PATCH printk v4 35/39] tty: serial: kgdboc: use console_list_lock for list traversal John Ogness
2022-11-15 15:18 ` Petr Mladek
2022-11-14 16:29 ` [PATCH printk v4 36/39] tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console() John Ogness
2022-11-14 16:29 ` [PATCH printk v4 37/39] tty: serial: kgdboc: use console_list_lock to trap exit John Ogness
2022-11-14 16:29 ` [PATCH printk v4 38/39] printk: relieve console_lock of list synchronization duties John Ogness
2022-11-15 15:34 ` replay log: " Petr Mladek
2022-11-15 16:41 ` John Ogness
2022-11-15 18:23 ` Petr Mladek
2022-11-16 8:52 ` John Ogness
2022-11-16 8:56 ` John Ogness
2022-11-16 9:08 ` John Ogness
2022-11-16 9:48 ` Petr Mladek
2022-11-15 16:41 ` Petr Mladek
2022-11-15 17:15 ` John Ogness
2022-11-15 18:36 ` Petr Mladek
2022-11-14 16:29 ` [PATCH printk v4 39/39] tty: serial: sh-sci: use setup() callback for early console John Ogness
2022-11-15 16:43 ` Petr Mladek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y3OFk2n7BquPUkOf@alley \
--to=pmladek@suse.com \
--cc=gregkh@linuxfoundation.org \
--cc=john.ogness@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rostedt@goodmis.org \
--cc=senozhatsky@chromium.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox