Re: [PATCH 3/3] usb: dwc2: prevent core phy initialisation

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Wed, Dec 07, 2022 at 02:19:18PM +0100, Quentin Schulz wrote:
> From: Bin Yang <yangbin@rock-chips.com>
> 
> The usb phys need to be controlled dynamically on some Rockchip SoCs.
> So set the new HCD flag which prevents USB core from trying to manage
> our phys.
> 
> Signed-off-by: Bin Yang <yangbin@rock-chips.com>
> Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
> ---
>  drivers/usb/dwc2/hcd.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index 657f1f659ffaf..757a66fa32fa8 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -5315,6 +5315,13 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
>  	if (!IS_ERR_OR_NULL(hsotg->uphy))
>  		otg_set_host(hsotg->uphy->otg, &hcd->self);
>  
> +	/*
> +	 * do not manage the PHY state in the HCD core, instead let the driver
> +	 * handle this (for example if the PHY can only be turned on after a
> +	 * specific event)
> +	 */
> +	hcd->skip_phy_initialization = 1;

Wait, doesn't this mess with the phy logic for all other chips that use
this IP block?  Have you tested this on other systems?

I'd like some verification first before taking this change as it seems
very specific-platform.

thanks,

greg k-h