Re: [PATCH RESEND v2 2/7] media: uvcvideo: improve error logging in uvc_query_ctrl()

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Ricardo and Hans,

Thank you for the patch.

On Fri, Dec 02, 2022 at 06:21:36PM +0100, Ricardo Ribalda wrote:
> From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> 
> If __uvc_query_ctrl() failed with a non-EPIPE error, then
> report that with dev_err. If an error code is obtained, then
> report that with dev_dbg.

The commit message should explain why this is desirable.

> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
>  drivers/media/usb/uvc/uvc_video.c | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> index 170a008f4006..2cf7f692c0bb 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -79,13 +79,14 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit,
>  	if (likely(ret == size))
>  		return 0;
>  
> -	dev_err(&dev->udev->dev,
> -		"Failed to query (%s) UVC control %u on unit %u: %d (exp. %u).\n",
> -		uvc_query_name(query), cs, unit, ret, size);
> -
> -	if (ret != -EPIPE)
> +	if (ret != -EPIPE) {
> +		dev_err(&dev->udev->dev,
> +			"Failed to query (%s) UVC control %u on unit %u: %d (exp. %u).\n",
> +			uvc_query_name(query), cs, unit, ret, size);
>  		return ret;
> +	}
>  
> +	/* reuse data[0] to request the error code. */

s/reuse/Reuse/

>  	tmp = *(u8 *)data;
>  
>  	ret = __uvc_query_ctrl(dev, UVC_GET_CUR, 0, intfnum,
> 

-- 
Regards,

Laurent Pinchart