From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Ricardo Ribalda <ribalda@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
"hn.chen" <hn.chen@sunplusit.com>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND v2 8/8] media: uvcvideo: Fix hw timestampt handling for slow FPS
Date: Fri, 30 Dec 2022 16:51:01 +0200 [thread overview]
Message-ID: <Y6761ScB9FgMC6zb@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20220920-resend-hwtimestamp-v2-8-0d7978a817cc@chromium.org>
Hi Ricardo,
Thank you for the patch.
On Fri, Dec 02, 2022 at 06:02:48PM +0100, Ricardo Ribalda wrote:
> In UVC 1.5, when working with FPS under 32, there is a chance that the
> circular buffer contains two dev_sof overflows,
An explanation of why this is the case would be good in the commit
message. Also, by overflow, are you talking about the SOF counter
rolling over ?
> but the clock interpolator
> is only capable of handle a single overflow.
>
> Remove all the samples from the circular buffer that are two overflows
> old.
I would rather support multiple roll-over in the clock interpolator.
Dropping older sampls will lead to less predictable behaviour and harder
to debug issues.
> Tested-by: HungNien Chen <hn.chen@sunplusit.com>
> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> ---
> drivers/media/usb/uvc/uvc_video.c | 15 +++++++++++++++
> drivers/media/usb/uvc/uvcvideo.h | 1 +
> 2 files changed, 16 insertions(+)
>
> diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> index c81a8362d582..6b6bd521d6c2 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -471,6 +471,20 @@ static void uvc_video_clock_add_sample(struct uvc_clock *clock,
>
> spin_lock_irqsave(&clock->lock, flags);
>
> + /* Delete last overflows */
> + if (clock->head == clock->last_sof_overflow)
> + clock->last_sof_overflow = -1;
> +
> + /* Handle overflows */
> + if (clock->count > 0 && clock->last_sof > sample->dev_sof) {
> + /* Remove data from the last^2 overflows */
> + if (clock->last_sof_overflow != -1)
> + clock->count = (clock->head - clock->last_sof_overflow)
> + % clock->count;
> + clock->last_sof_overflow = clock->head;
> + }
> +
> + /* Add sample */
> memcpy(&clock->samples[clock->head], sample, sizeof(*sample));
> clock->last_sof = sample->dev_sof;
> clock->head = (clock->head + 1) % clock->size;
> @@ -594,6 +608,7 @@ static void uvc_video_clock_reset(struct uvc_clock *clock)
> clock->head = 0;
> clock->count = 0;
> clock->last_sof = -1;
> + clock->last_sof_overflow = -1;
> clock->sof_offset = -1;
> }
>
> diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> index 14daa7111953..d8c520ce5a86 100644
> --- a/drivers/media/usb/uvc/uvcvideo.h
> +++ b/drivers/media/usb/uvc/uvcvideo.h
> @@ -647,6 +647,7 @@ struct uvc_streaming {
> unsigned int head;
> unsigned int count;
> unsigned int size;
> + unsigned int last_sof_overflow;
>
> u16 last_sof;
> u16 sof_offset;
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2022-12-30 14:51 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-02 17:02 [PATCH RESEND v2 0/8] uvcvideo: Fixes for hw timestamping Ricardo Ribalda
2022-12-02 17:02 ` [PATCH RESEND v2 1/8] media: uvc: Extend documentation of uvc_video_clock_decode() Ricardo Ribalda
2022-12-30 13:36 ` Laurent Pinchart
2022-12-02 17:02 ` [PATCH RESEND v2 2/8] media: uvc: Allow quirking by entity guid Ricardo Ribalda
2022-12-30 13:40 ` Laurent Pinchart
2023-01-03 15:40 ` Ricardo Ribalda
2023-01-03 21:16 ` Laurent Pinchart
2022-12-02 17:02 ` [PATCH RESEND v2 3/8] media: uvc: Create UVC_QUIRK_IGNORE_EMPTY_TS quirk Ricardo Ribalda
2022-12-30 13:45 ` Laurent Pinchart
2023-01-03 16:00 ` Ricardo Ribalda
2023-01-07 1:16 ` Laurent Pinchart
2022-12-02 17:02 ` [PATCH RESEND v2 4/8] media: uvcvideo: Quirk for invalid dev_sof in Logi C922 Ricardo Ribalda
2022-12-30 14:31 ` Laurent Pinchart
2022-12-02 17:02 ` [PATCH RESEND v2 5/8] media: uvcvideo: Quirk for autosuspend in Logi C910 Ricardo Ribalda
2022-12-30 13:52 ` Laurent Pinchart
2023-01-03 16:13 ` Ricardo Ribalda
2022-12-02 17:02 ` [PATCH RESEND v2 6/8] media: uvcvideo: Allow hw clock updates with buffers not full Ricardo Ribalda
2022-12-30 14:37 ` Laurent Pinchart
2022-12-02 17:02 ` [PATCH RESEND v2 7/8] media: uvcvideo: Refactor clock circular buffer Ricardo Ribalda
2022-12-30 14:39 ` Laurent Pinchart
2022-12-02 17:02 ` [PATCH RESEND v2 8/8] media: uvcvideo: Fix hw timestampt handling for slow FPS Ricardo Ribalda
2022-12-30 14:51 ` Laurent Pinchart [this message]
2023-01-03 23:34 ` Ricardo Ribalda
2023-01-07 0:54 ` Laurent Pinchart
2023-01-09 8:13 ` Ricardo Ribalda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y6761ScB9FgMC6zb@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=hn.chen@sunplusit.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=ribalda@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox