public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [GIT PULL] USB driver fixes for 6.2-rc5
Date: Sat, 21 Jan 2023 16:28:48 +0100	[thread overview]
Message-ID: <Y8wEsNOa9JR4cdPK@kroah.com> (raw)

The following changes since commit b7bfaa761d760e72a969d116517eaa12e404c262:

  Linux 6.2-rc3 (2023-01-08 11:49:43 -0600)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git tags/usb-6.2-rc5

for you to fetch changes up to 14ff7460bb58662d86aa50298943cc7d25532e28:

  USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100 (2023-01-20 15:06:23 +0100)

----------------------------------------------------------------
USB / Thunderbolt fixes for 6.2-rc5

Here are a number of small USB and Thunderbolt driver fixes and new
device id changes for 6.2-rc5.  Included in here are:
  - thunderbolt bugfixes for reported problems
  - new usb-serial driver ids added
  - onboard_hub usb driver fixes for much-reported problems
  - xhci bugfixes
  - typec bugfixes
  - ehci-fsl driver module alias fix
  - iowarrior header size fix
  - usb gadget driver fixes

All of these, except for the iowarrior fix, have been in linux-next with
no reported issues.  The iowarrior fix passed the 0-day testing and is a
one digit change based on a reported problem in the driver (which was
written to a spec, not the real device that is now available.)

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

----------------------------------------------------------------
Alan Stern (1):
      USB: gadgetfs: Fix race between mounting and unmounting

Alexander Stein (1):
      usb: host: ehci-fsl: Fix module alias

Ali Mirghasemi (1):
      USB: serial: option: add Quectel EC200U modem

Arnd Bergmann (1):
      usb: dwc3: fix extcon dependency

Chanh Nguyen (1):
      USB: gadget: Add ID numbers to configfs-gadget driver names

ChiYuan Huang (1):
      usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail

Daniel Scally (1):
      usb: gadget: g_webcam: Send color matching descriptor per frame

Duke Xin(辛安文) (5):
      USB: serial: option: add Quectel EM05-G (CS) modem
      USB: serial: option: add Quectel EM05-G (GR) modem
      USB: serial: option: add Quectel EM05-G (RS) modem
      USB: serial: option: add Quectel EM05CN (SG) modem
      USB: serial: option: add Quectel EM05CN modem

Flavio Suligoi (1):
      usb: core: hub: disable autosuspend for TI TUSB8041

Greg Kroah-Hartman (3):
      Merge tag 'thunderbolt-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
      Merge tag 'usb-serial-6.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
      USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100

Jack Pham (1):
      usb: ucsi: Ensure connector delayed work items are flushed

Jimmy Hu (1):
      usb: xhci: Check endpoint is valid before dereferencing it

Johan Hovold (1):
      USB: fix misleading usb_set_intfdata() kernel doc

Juhyung Park (1):
      usb-storage: apply IGNORE_UAS only for HIKSEMI MD202 on RTL9210

Maciej Żenczykowski (1):
      usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()

Mathias Nyman (5):
      xhci: Fix null pointer dereference when host dies
      xhci: Add update_hub_device override for PCI xHCI hosts
      xhci: Add a flag to disable USB3 lpm on a xhci root port level.
      usb: acpi: add helper to check port lpm capability using acpi _DSM
      xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables

Matthias Kaehlcke (2):
      usb: misc: onboard_hub: Invert driver registration order
      usb: misc: onboard_hub: Move 'attach' work to the driver

Michael Adler (1):
      USB: serial: cp210x: add SCALANCE LPE-9000 device id

Mika Westerberg (3):
      thunderbolt: Do not call PM runtime functions in tb_retimer_scan()
      thunderbolt: Use correct function to calculate maximum USB3 link rate
      thunderbolt: Disable XDomain lane 1 only in software connection manager

Pawel Laszczak (1):
      usb: cdns3: remove fetched trb from cache before dequeuing

Prashant Malani (3):
      usb: typec: altmodes/displayport: Add pin assignment helper
      usb: typec: altmodes/displayport: Fix pin assignment calculation
      usb: typec: altmodes/displayport: Use proper macro for pin assignment check

Ricardo Ribalda (1):
      xhci-pci: set the dma max_seg_size

Udipto Goswami (2):
      usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
      usb: gadget: f_fs: Ensure ep0req is dequeued before free_request

Utkarsh Patel (1):
      thunderbolt: Do not report errors if on-board retimers are found

Xu Yang (1):
      usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)

Yang Yingliang (1):
      usb: musb: fix error return code in omap2430_probe()

 drivers/thunderbolt/retimer.c            | 20 ++--------
 drivers/thunderbolt/tb.c                 | 20 +++++++---
 drivers/thunderbolt/tunnel.c             |  2 +-
 drivers/thunderbolt/xdomain.c            | 17 ++++++---
 drivers/usb/cdns3/cdns3-gadget.c         | 12 ++++++
 drivers/usb/chipidea/core.c              |  4 +-
 drivers/usb/core/hub.c                   | 13 +++++++
 drivers/usb/core/usb-acpi.c              | 65 ++++++++++++++++++++++++++++++++
 drivers/usb/dwc3/Kconfig                 |  2 +-
 drivers/usb/gadget/configfs.c            | 12 +++++-
 drivers/usb/gadget/function/f_fs.c       |  7 ++++
 drivers/usb/gadget/function/f_ncm.c      |  4 +-
 drivers/usb/gadget/legacy/inode.c        | 28 ++++++++++----
 drivers/usb/gadget/legacy/webcam.c       |  3 ++
 drivers/usb/host/ehci-fsl.c              |  2 +-
 drivers/usb/host/xhci-pci.c              | 45 ++++++++++++++++++++++
 drivers/usb/host/xhci-ring.c             |  5 ++-
 drivers/usb/host/xhci.c                  | 18 ++++++++-
 drivers/usb/host/xhci.h                  |  5 +++
 drivers/usb/misc/iowarrior.c             |  2 +-
 drivers/usb/misc/onboard_usb_hub.c       | 18 ++++-----
 drivers/usb/musb/omap2430.c              |  4 +-
 drivers/usb/serial/cp210x.c              |  1 +
 drivers/usb/serial/option.c              | 17 +++++++++
 drivers/usb/storage/uas-detect.h         | 13 +++++++
 drivers/usb/storage/unusual_uas.h        |  7 ----
 drivers/usb/typec/altmodes/displayport.c | 22 +++++++----
 drivers/usb/typec/tcpm/tcpm.c            |  7 ++--
 drivers/usb/typec/ucsi/ucsi.c            | 24 ++++++++++--
 drivers/usb/typec/ucsi/ucsi.h            |  1 +
 include/linux/usb.h                      | 18 +++++----
 31 files changed, 334 insertions(+), 84 deletions(-)

             reply	other threads:[~2023-01-21 15:29 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-21 15:28 Greg KH [this message]
2023-01-21 19:23 ` [GIT PULL] USB driver fixes for 6.2-rc5 pr-tracker-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y8wEsNOa9JR4cdPK@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox