[PATCH v2] net: tulip: Fix typos ("defualt" and "hearbeat")

Jonathan Neuschäfer
2023-01-29T19:53:44Z

Spell them as "default" and "heartbeat".

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---

v2:
- also fix "hearbeat", as suggested by Simon Horman
---
drivers/net/ethernet/dec/tulip/tulip.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/dec/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h
index 0ed598dc7569c..10d7d8de93660 100644
--- a/drivers/net/ethernet/dec/tulip/tulip.h
+++ b/drivers/net/ethernet/dec/tulip/tulip.h
@@ -250,7 +250,7 @@ enum t21143_csr6_bits {
csr6_ttm = (1<<22), /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */
csr6_sf = (1<<21), /* Store and forward. If set ignores TR bits */
csr6_hbd = (1<<19), /* Heart beat disable. Disables SQE function in 10baseT */
- csr6_ps = (1<<18), /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */
+ csr6_ps = (1<<18), /* Port Select. 0 (default) = 10baseT, 1 = 100baseTX: can't be set */
csr6_ca = (1<<17), /* Collision Offset Enable. If set uses special algorithm in low collision situations */
csr6_trh = (1<<15), /* Transmit Threshold high bit */
csr6_trl = (1<<14), /* Transmit Threshold low bit */
@@ -274,7 +274,7 @@ enum t21143_csr6_bits {
csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */
csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */
/* set both and you get (PHY) loopback */
- csr6_fd = (1<<9), /* Full duplex mode, disables hearbeat, no loopback */
+ csr6_fd = (1<<9), /* Full duplex mode, disables heartbeat, no loopback */
csr6_pm = (1<<7), /* Pass All Multicast */
csr6_pr = (1<<6), /* Promiscuous mode */
csr6_sb = (1<<5), /* Start(1)/Stop(0) backoff counter */
--
2.39.0