Re: [PATCH v8] fbtft: add tearing signal detect

[Greg KH <gregkh@linuxfoundation.org>]

On Wed, Jan 27, 2021 at 06:26:46PM +0800, Carlis wrote:
> From: zhangxuezhi <zhangxuezhi1@yulong.com>
> 
> For st7789v ic,add tearing signal detect to avoid screen tearing
> 
> Signed-off-by: zhangxuezhi <zhangxuezhi1@yulong.com>
> ---
> v8: delete a log line
> ---
>  drivers/staging/fbtft/fb_st7789v.c | 132 ++++++++++++++++++++++++++++++++++++-
>  drivers/staging/fbtft/fbtft.h      |   1 +
>  2 files changed, 132 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/staging/fbtft/fb_st7789v.c b/drivers/staging/fbtft/fb_st7789v.c
> index 3a280cc..de7460c 100644
> --- a/drivers/staging/fbtft/fb_st7789v.c
> +++ b/drivers/staging/fbtft/fb_st7789v.c
> @@ -9,9 +9,12 @@
>  #include <linux/delay.h>
>  #include <linux/init.h>
>  #include <linux/kernel.h>
> +#include <linux/mutex.h>
> +#include <linux/interrupt.h>
> +#include <linux/completion.h>
>  #include <linux/module.h>
>  #include <video/mipi_display.h>
> -
> +#include <linux/gpio/consumer.h>
>  #include "fbtft.h"
>  
>  #define DRVNAME "fb_st7789v"
> @@ -66,6 +69,32 @@ enum st7789v_command {
>  #define MADCTL_MX BIT(6) /* bitmask for column address order */
>  #define MADCTL_MY BIT(7) /* bitmask for page address order */
>  
> +#define SPI_PANEL_TE_TIMEOUT	400
> +static struct mutex te_mutex;/*mutex for tearing line*/
> +static struct completion spi_panel_te;
> +
> +static irqreturn_t spi_panel_te_handler(int irq, void *data)
> +{
> +	complete(&spi_panel_te);
> +	return IRQ_HANDLED;
> +}
> +
> +static void set_spi_panel_te_irq_status(struct fbtft_par *par, bool enable)
> +{
> +	static int te_irq_count;
> +
> +	mutex_lock(&te_mutex);
> +
> +	if (enable) {
> +		if (++te_irq_count == 1)
> +			enable_irq(gpiod_to_irq(par->gpio.te));
> +	} else {
> +		if (--te_irq_count == 0)
> +			disable_irq(gpiod_to_irq(par->gpio.te));
> +	}
> +	mutex_unlock(&te_mutex);
> +}
> +
>  /**
>   * init_display() - initialize the display controller
>   *
> @@ -82,6 +111,33 @@ enum st7789v_command {
>   */
>  static int init_display(struct fbtft_par *par)
>  {
> +	int rc;
> +	struct device *dev = par->info->device;
> +
> +	par->gpio.te = devm_gpiod_get_index_optional(dev, "te", 0, GPIOD_IN);
> +	if (IS_ERR(par->gpio.te)) {
> +		rc = PTR_ERR(par->gpio.te);
> +		pr_err("Failed to request te gpio: %d\n", rc);

You are a driver, always use dev_* calls, not pr_*.

This should be dev_err().

same for other pr_ functions you add in this patch.

Also, look at other commits for this file and make your subject: line
match them (i.e. you forgot "staging: ")

thanks,

greg k-h